774fcf5f68
Merge commit '34e8c55a006ed3a2a989bf4e57c32bfa2e56f35b' into development
...
Conflicts:
js/msp.js
2015-05-25 23:43:52 +01:00
dec46c0d30
Update changelog and prepare for release
2015-05-23 15:03:45 +01:00
5707a12858
Fix for some incorrect data being left in the data structures after
...
connecting to two different firmware revisions.
This is a hack, the true fix should be to re-initialise the data
structures that are found in data_storage.js. See #197
2015-05-23 15:03:15 +01:00
322b7c1085
Fix access to `RC_YAW_EXPO` in `MSP_RC_TUNING` data packet
2015-05-22 21:37:04 +02:00
ab883c6dc5
Cleanup code indention and positioning the rc_yaw_expo field
2015-05-22 21:37:03 +02:00
34c6077b5c
Yaw Expo Feature
2015-05-22 21:37:01 +02:00
3086a98828
Add support for manual baud rate selection to firmware flasher.
2015-05-22 02:29:29 +01:00
5471ab7f65
Add support for STM32 Extended Erase to allow erasing only needed pages.
2015-05-22 02:18:40 +01:00
2f6160d6a1
Merge branch 'eziosoft-master' into development
2015-05-22 00:27:38 +01:00
90cc08c86b
Test and cleanup STM32 extended erase bootloader command support.
...
Note: entire chip only for now - 'Full Chip Erase' checkbox is ignored.
2015-05-22 00:27:09 +01:00
2e6f5aa4d4
Prepare for release.
2015-05-20 15:37:28 +01:00
ef682cdca9
STM F3 support
...
Partial F3 support. Should be enough to flash correctly.
Currently only full chip erase is supported.
IT IS NOT TESTED AT ALL as I don't have hardware
2015-05-19 03:04:40 +02:00
d18e5a9559
Merge branch 'manual_comport_selection' of git://github.com/pulsar256/cleanflight-configurator into pulsar256-manual_comport_selection
2015-05-17 23:11:58 +01:00
cabeba70f7
checkbox to show dev releases, code refactoring
2015-05-17 23:01:27 +01:00
8913b8bb1c
handle setups with no non-bt serial ports - for real
2015-05-10 22:30:00 +02:00
21a75ea7d3
gui cosmetics, handle setups with no non-bt serial ports
2015-05-10 21:51:16 +02:00
1bb63a597b
manual port override as chrome won't enumerate bluetooth serial ports on linux
2015-05-10 14:37:31 +02:00
d10023ec4b
Update changelog and prepare for release.
2015-05-09 04:36:30 +01:00
0f95f4ec4c
Improve MSP handling of servo configuration. Fixes backup of CJMCU
...
boards.
2015-05-07 22:47:32 +01:00
244685c9a6
Update version checking code to use semantic versioning - see
...
http://semver.org/
semver.js creating using browserify.
https://www.brcdn.org/?module=semver&version=4.3.4
2015-05-07 22:10:26 +01:00
e781e14617
fix for undefined function
...
ArrayBuffer does NOT have length but byteLength parameter.
2015-04-28 10:20:48 +02:00
37a1c0d3e7
Update changelog and prepare for release.
2015-04-14 13:33:38 +01:00
bf353192ef
Avoid backing up invalid looptime/arming configuration for firmware with
...
api < 1.8
2015-04-14 13:29:44 +01:00
2398f10b62
Fix for restoring backups created with 0.63.0 for firmwares with api <
...
1.8.0 that were saved with incorrect looptime.
2015-04-14 13:25:45 +01:00
77d608063d
Prepare for release.
2015-03-29 16:18:54 +01:00
045d2b0ca4
Use updated IDs for MSP_LOOP_TIME and MSP_SET_LOOP_TIME. Cleanup and
...
fix backup/restore arming config. Backup restore/looptime. Add config
migration of looptime and arming config. Rename MSP_RCMAP to
MSP_RX_MAP to match cleanflight code.
2015-03-29 15:01:54 +01:00
2e046db53e
Ensure offset variable is updated consistently in MSP_MISC.
...
See 9261163ca2
2015-03-29 12:06:33 +01:00
54c5d9b44c
Reworked msp.js - MSP_ARMING_CONFIG, MSP_SET_ARMING_CONFIG
2015-03-29 08:58:01 +11:00
e362130810
Reworked data_storage.js - ARMING_CONFIG
2015-03-29 08:45:08 +11:00
68dbf1707e
Merge pull request #11 from cleanflight/development
...
Sync to latest changes
2015-03-23 08:43:54 +11:00
52d7670977
Move apiVersion to appear before profiles in backup file.
2015-03-22 09:25:32 +00:00
2e5acfc1bd
Fix the 0.63.0 serial port configuration migration code.
2015-03-22 09:19:10 +00:00
a1f932f36a
Reworked msp.js - new code MSP_ARM_CONFIG etc
2015-03-18 14:46:24 +11:00
e5235e46e6
Code style check data_storage.js
2015-03-18 14:29:09 +11:00
ea78239cac
Reworked data_storage.js - ARM_CONFIG and LOOP_TIME
2015-03-18 14:24:50 +11:00
9261163ca2
Reworked msp.js
...
MISC.auto_disarm_delay, MISC.disarm_kill_switch are CONFIG.apiVersion dependent
2015-03-15 17:04:40 +11:00
fde8edfe1e
MISC auto_disarm_delay and disarm_kill_switch
2015-03-14 11:17:30 +11:00
fc656d4ac2
MISC auto_disarm_delay and disarm_kill_switch
2015-03-14 11:08:29 +11:00
2863077ee3
Merge remote-tracking branch 'upstream/development' into development
2015-03-14 10:19:24 +13:00
e462439c1b
Upgrade D3 library to 3.5.5.
...
See http://d3js.org/
2015-03-12 00:14:39 +00:00
8160e8e353
Merge branch 'development' of https://github.com/tricopterY/cleanflight-configurator into development
...
Conflicts:
js/msp.js
tabs/pid_tuning.html
tabs/pid_tuning.js
2015-03-12 00:40:15 +01:00
b2be2853b4
Provide a migration path from pre-1.8.0 firmware backups.
2015-03-11 23:34:24 +00:00
4b2704e784
Support independent configuration of pitch and roll rates. Cleanup of
...
tpa breakpoint configuration support.
2015-03-11 22:50:07 +00:00
abbfe1d763
Update jquery.flightindicators.js
2015-03-11 16:57:50 +11:00
3ed04866f6
Update gui.js
2015-03-11 16:41:09 +11:00
97857b19d8
Update data_storage.js
2015-03-11 16:20:15 +11:00
f4fb947f8f
Update msp.js
2015-03-11 16:18:49 +11:00
6380a7a821
Merge pull request #8 from tricopterY/development
...
development sync
2015-03-11 14:07:33 +11:00
8e6c5909c1
Merge pull request #4 from tricopterY/tricopterY-patch-1-3
...
Update data_storage.js
2015-03-10 16:10:12 +11:00
2b5296884a
Update msp.js
...
Added TPA Breakpoint handling via PID Tuning tab
2015-03-10 14:51:23 +11:00
3d921b9549
Update data_storage.js
...
Support for TPA Breakpoint via GUI
2015-03-10 14:35:00 +11:00
b331315b76
Add 250000 baudrate for blackbox
2015-03-07 13:07:32 +13:00
aa8d5300e5
Support new Blackbox baudrates including new 230400 rate
2015-03-06 19:58:57 +13:00
88a9699487
Drop support for old API and configuration backups. Additional code is
...
required to migrate and support pre 1.8.x serial port configuration.
This commit is just to limit user expectations until such code is
written.
2015-03-03 23:29:11 +00:00
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
c3f1c13d54
Move Documentation and Support links to separate tab. Add a
...
contributing section. Unify help/landing section CSS/html a little.
Expand the sponsors panel area in preparation for an updated section.
2015-03-03 16:27:40 +00:00
9ba21f773f
Fix servo channel forwarding configuration. Closes #117 .
...
Editor mishap during refactoring in
34d72feb69
2015-02-27 10:52:56 +00:00
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
289719b81a
Merge remote-tracking branch 'upstream/development' into development
2015-02-27 00:45:01 +13:00
7bdd010eb0
Avoid using GPS commands for targets that do not have GPS support
...
compiled in.
2015-02-23 21:27:55 +00:00
66e767881e
Fix endianness of board version read
2015-02-23 22:47:47 +13:00
831e4a848e
Merge branch 'blackbox-flash' of
...
https://github.com/sherlockflight/cleanflight-configurator-dev into
sherlockflight-blackbox-flash
Conflicts:
_locales/en/messages.json
2015-02-22 21:51:18 +00:00
31fd709351
Update changelog, bump verson and prepare for release.
2015-02-20 20:11:01 +00:00
f89aaa1011
Add flight instruments to setup tab
2015-02-20 01:18:49 +00:00
d0ae8dd921
Show "dataflash unsupported" for old versions missing new MSP commands
2015-02-16 19:13:09 +13:00
7fb9f43b00
Merge remote-tracking branch 'upstream/development' into blackbox-flash
2015-02-16 17:45:47 +13:00
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
34d72feb69
Move handling of servo channel forwarding into the MSP.
2015-02-10 01:12:26 +00:00
745c2dc793
Adding SP Racing F3 board.
2015-02-08 23:16:29 +00:00
6901aa2dbc
Cleanup serial port count code.
2015-02-08 23:16:17 +00:00
39be4d9e62
Update changelog and prepare for release.
2015-02-03 00:18:50 +00:00
cfe6949c84
Allow same rnage of values for board alignment as cli (-180 - 360)
2015-02-02 00:08:09 +00:00
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
e672dde6e2
Fix backup of PID controller.
2015-01-29 21:50:02 +01:00
c78bd800db
Fix MSP_GPS_SV_INFO comment
...
Depends on #437
2015-01-29 19:26:42 +01:00
e447739e74
Adjust documentation button so that it doesn't move the sensor
...
indicators when connected. Use same color as other help panels.
2015-01-29 19:01:37 +01:00
20a82e7339
Merge branch 'development' of https://github.com/pulsar256/cleanflight-configurator into pulsar256-development
2015-01-29 18:30:21 +01:00
e96839d3d8
Merge pull request #80 from ledvinap/feature-negative-current
...
Allow negative current draw
2015-01-29 18:29:01 +01:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
aaab850407
Change MSP_SONAR_ALTITUDE to be in the range used for cleanflight
...
original commands.
See
https://code.google.com/p/multiwii/source/browse/trunk/MultiWii_shared/Protocol.cpp#18
2015-01-29 15:29:12 +01:00
39c70ce9b8
Add sonar data storage
2015-01-28 22:28:19 +01:00
f933dbf330
Sonar altitude added to sensors
2015-01-28 22:24:44 +01:00
943d33ba4d
Allow negative current draw
...
Interpret MSP_ANALOG.amperage value as signed
2015-01-28 17:15:23 +01:00
d3fc8464fa
added a help button for the currently installed firmware
2015-01-28 00:01:42 +01:00
b3424eadcb
Defining the models and images used in one place to make maintainance of
...
the mixer list easier.
2015-01-27 21:06:39 +01:00
a56c0eef40
Fix welcome tab being cleared after failing to connect to a port.
2015-01-27 00:43:09 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
342a5134a5
Merge branch 'feature-negative-currentsensors' of https://github.com/frog32/cleanflight-configurator into frog32-feature-negative-currentsensors
2015-01-26 19:01:01 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
994b04b0aa
Add support for LED strip 'color' mode.
2015-01-25 16:22:57 +01:00
126beedf9c
Allow negative current scales and allow an offset between 0 and 3.3V
2015-01-23 12:01:52 +01:00
6a11e44802
Bump minimum API version up - needs latest firmware for LED strip/ring
...
compatibility.
2015-01-23 02:26:19 +01:00
a5de593da7
Allow LED strip colors to be used. Requires new firmware.
...
At the moment colors are only used by the thrust ring mode.
2015-01-23 02:12:20 +01:00
8c10f39606
Add support for backup and restore of led strip config.
...
Various minor code cleanups.
2015-01-19 20:41:41 +01:00
8870f9731d
Prepare for release 0.60.0.
2015-01-16 18:06:04 +00:00
f480e05027
Merge branch 'led-strip' into development
2015-01-16 17:24:13 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
30ddc6ac83
replace motor order models with script generated varients
2015-01-10 19:17:23 +00:00
683e68b036
Add support for MSP_LED_STRIP_CONFIG.
2015-01-08 23:21:17 +00:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
6031907163
Merge branch 'development' of https://github.com/Roeland54/cleanflight-configurator into Roeland54-development
2015-01-08 01:37:19 +00:00
0285723fab
First cut of working configuration migration.
2015-01-07 20:15:22 +00:00
835e665017
Fix 'unknown code' messages in console log.
2015-01-07 20:15:21 +00:00
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
32a27b73a7
CLI available for old firmware versions
2015-01-06 20:35:58 +01:00
dfdb5cd99d
Prepare for 0.58.0 release.
2015-01-03 22:31:12 +00:00
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
a7dc838cdc
Removing review code.
2014-12-24 18:58:29 +00:00
aacbe4d76f
updating d3 and jquery libraries
2014-12-24 18:44:44 +00:00
6d24ce6b28
Re-instate support for A-Tail now that the firmware supports it.
2014-12-21 15:00:53 +00:00
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
bf72712d2f
updating d3 and jquery libraries
2014-12-20 13:46:24 +01:00
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
e8bd813fb8
Re-implement model diagram on motors tab.
...
See 79505e42ed
2014-12-20 00:29:49 +00:00
a8cf910f51
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
README.md
_locales/en/messages.json
changelog.html
js/backup_restore.js
js/data_storage.js
js/msp.js
js/protocols/stm32.js
js/serial_backend.js
main.css
main.html
main.js
manifest.json
tabs/auxiliary_configuration.css
tabs/default.css
tabs/firmware_flasher.js
tabs/initial_setup.css
tabs/initial_setup.html
tabs/initial_setup.js
tabs/modes.html
tabs/modes.js
tabs/motor_outputs.css
tabs/motors.html
tabs/receiver.css
tabs/servos.js
2014-12-18 22:40:03 +00:00
e86172b755
cleanup the documentation
2014-12-16 10:21:07 +01:00
9cf60224b2
Added Warning Cell Voltage
...
Added Warning Cell Voltage to Battery voltage in Configuration tab. When battery has deployed to level that is defined with warning cell voltage buzzer starts slow beeping and copter can still land safely. When min voltage is reached beeper start fast "screaming" and LIPO is empty (to point when it could be damaged from over discharging if using that default 3.3V).
2014-12-09 10:37:02 +02:00
9cebfb53f2
updating changelog/version/release
2014-12-06 15:40:38 +01:00
e87c0ca4ee
experimental bugfix for backup/restore failing under certain conditions
2014-12-05 10:24:20 +01:00
21e414f4b3
fix method name mismatch in serial layer
2014-12-05 10:23:53 +01:00
ebff37ae3f
fix review condition
2014-11-29 21:49:55 +01:00
8150bb7c07
swap the don't like url to point to the store support
2014-11-29 11:40:18 +01:00
19f2368bb9
return self through dialog handler function
2014-11-29 11:34:13 +01:00
4df1e9aafc
Merge pull request #66 from jaahaavi/master
...
Updated GPS settings
2014-11-29 10:15:19 +01:00
2eb6c0b691
stop the dialog from jumping vertically
2014-11-25 20:49:43 +01:00
b2cb677869
Updated GPS settings
...
- Added SBAS disabled (-1) to configuration tab
- Fixed GPS signal strength bars
2014-11-23 11:41:24 +02:00
fb1f22b248
fix internal pointers for window resize handler in review code
2014-11-22 08:28:56 +01:00
92f085f561
fix failed indentation in last commit
2014-11-22 06:54:25 +01:00
de87fab530
reworked serial layer (more verbose), added checks for chrome.runtime.lastError in connect and disconnect api calls
2014-11-22 06:31:46 +01:00
88abe0969d
EXPERIMENTAL delayed connect callback chain bugfix, this took months to track down
2014-11-21 13:50:02 +01:00
5e165b286b
implemented simple review mechanism
2014-11-21 08:40:43 +01:00
698aeb1bf9
correct callbacks in firmware flasher, optimize speed by updating UI between read/write operations
2014-11-15 13:44:12 +01:00
366cd018b2
whops, fixing trailing commas
2014-11-15 01:18:04 +01:00
7a0d3a1199
handle all sorts of edge cases that would otherwise break UI or functionality
2014-11-11 11:59:12 +01:00
f3020aed10
Bump release date.
2014-11-09 00:58:16 +00:00
902da2f91d
Add 'Adjustments' tab.
...
Cleanup 'Auxilary' tab code.
Rename other tabs to have shorter titles.
2014-11-09 00:46:12 +00:00
a31282c6a3
fix vbatmincellvoltage and vbatmaxcellvoltage scale factors inside output cruncher
2014-11-03 18:36:29 +01:00
9ee7670af7
add backupFileMinVersionAccepted in data storage, release
2014-10-31 11:27:15 +01:00
9974fbd68f
updating d3
2014-10-28 16:58:46 +01:00
a7e7552893
updating three.js to the latest version, adding separate folder to contain the library and required extension to support canvas renderer
2014-10-25 14:06:20 +02:00
36f447b4da
Make MSP_API_VERSION check non-mandatory for now.
2014-10-20 23:25:42 +01:00
be96da6098
reorder some of the cleanup routines, cleanup (experimental)
2014-10-19 16:17:44 +02:00
f387ea96ac
initialize connect_lock by default
2014-10-19 15:55:56 +02:00
0c2ec52bed
fix accidently removed buildinfo fetch on connect
2014-10-19 15:52:55 +02:00
2733f4832e
Retrieve and display MSP API Version from new MSP_API_VERSION command.
...
Requires latest firmware.
2014-10-18 16:58:49 +01:00
8477573be5
doubling initialization timeout inside port handler
2014-10-17 11:52:52 +02:00
f3968aaa70
Normalize all the line endings
2014-10-15 15:27:57 +01:00
Dominic Clifton
ProDrone
borisbstyle
Bart
Paul Rogalinski
Mauro Mombelli
tricopterY
Nicholas Sherlock
Richard Birkby
tracernz
Krzysztof Rosinski
Petr Ledvina
Marc Egli
Jonathan Hudson
Roeland Lutters
cTn
jaahaavi