4b2704e784
Support independent configuration of pitch and roll rates. Cleanup of
...
tpa breakpoint configuration support.
2015-03-11 22:50:07 +00:00
6380a7a821
Merge pull request #8 from tricopterY/development
...
development sync
2015-03-11 14:07:33 +11:00
d0fc671651
Update messages.json
...
Added pidTuningTPABreakPoint
2015-03-10 15:02:14 +11:00
67c8cdcaac
Internationalise the Telemetry port dropdown option for 'Disabled'.
2015-03-05 15:57:23 +00:00
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
c3f1c13d54
Move Documentation and Support links to separate tab. Add a
...
contributing section. Unify help/landing section CSS/html a little.
Expand the sponsors panel area in preparation for an updated section.
2015-03-03 16:27:40 +00:00
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
ede3c367f2
Error message for saving to disallowed dir,fix flash save problem on osx
2015-02-27 09:14:47 +13:00
831e4a848e
Merge branch 'blackbox-flash' of
...
https://github.com/sherlockflight/cleanflight-configurator-dev into
sherlockflight-blackbox-flash
Conflicts:
_locales/en/messages.json
2015-02-22 21:51:18 +00:00
f89aaa1011
Add flight instruments to setup tab
2015-02-20 01:18:49 +00:00
ed285992da
Detect support for flash chip and disable tab if not available
2015-02-16 18:05:24 +13:00
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
506e9c43fb
Fix link for IRC web client.
2015-01-29 15:36:22 +01:00
975e863bd0
Enhance welcome tab by adding documentation and support panels with
...
links.
2015-01-29 05:21:02 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
f480e05027
Merge branch 'led-strip' into development
2015-01-16 17:24:13 +00:00
7a674c9ab2
Display a message when the LED strip configuration has been saved.
...
Remove the old CLI panel.
2015-01-16 00:29:16 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
9b083c9bb9
Update messages adjustments
...
Update messages adjustments PID to more accurate versions.
2015-01-12 08:26:25 +01:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
e4bc970680
Use i18n for tab switch message.
2015-01-08 11:38:10 +00:00
3a4ea7e1c1
Update messaging used when api version is incompatible.
2015-01-08 01:50:35 +00:00
6031907163
Merge branch 'development' of https://github.com/Roeland54/cleanflight-configurator into Roeland54-development
2015-01-08 01:37:19 +00:00
f5ba166c15
Add failsafe feature to RX section.
2015-01-08 01:06:42 +00:00
0285723fab
First cut of working configuration migration.
2015-01-07 20:15:22 +00:00
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
272cfea963
Merge branch 'master' into development
...
* master:
CLI available for old firmware versions
2015-01-06 20:38:05 +01:00
32a27b73a7
CLI available for old firmware versions
2015-01-06 20:35:58 +01:00
6df04c151a
Updating link to releases.
2015-01-05 11:47:17 +00:00
26d6c1a562
Allow baud rate configuration on the Configuration tab.
2015-01-04 10:28:32 +00:00
bfa689be40
Overhaul of the configuration tab.
2015-01-04 08:09:10 +00:00
b905632f0e
Merge branch 'UKTamo-patch-1' into development
2015-01-03 01:15:02 +00:00
c58ca02d8f
Merge branch 'patch-1' of https://github.com/UKTamo/cleanflight-configurator into UKTamo-patch-1
2015-01-03 01:14:36 +00:00
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
fe72557b12
Removing more review related code. Adding skeleton of new Ports tab.
2015-01-02 19:31:50 +00:00
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
0aa33393c4
Improve firmware flasher messaging.
2014-12-26 18:20:45 +00:00
7a800444b5
Force the user to pick a fimrware before loading
2014-12-25 00:02:18 +01:00
a7dc838cdc
Removing review code.
2014-12-24 18:58:29 +00:00
29018001c0
Change the text on the 'Save' button on the Configuration to 'Save and
...
Reboot' to reflect it's behaviour.
2014-12-21 14:45:06 +00:00
b58ffa9994
Rename 'Auxilary' tab to 'Modes' to be more user friendly.
2014-12-21 14:37:00 +00:00
7522d97092
Adjust tab titles for simplicity.
2014-12-21 14:14:53 +00:00
2be5eedf18
Add message about `dump` command to backup/restore note.
2014-12-21 12:38:22 +00:00
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
e1d2fb3163
Update hardware list (sparky, cc3d, cjmcu, etc).
2014-12-21 00:37:18 +00:00
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
ccc0b839e6
Minor tweaks to the firmwre flasher.
2014-12-19 19:48:19 +00:00
c6867d3c52
Update the firmware flasher to provide more details about the release.
...
Add warning message about target selection.
2014-12-19 16:04:42 +00:00
dac49093a0
Update firmware flasher so that it uses files available via the github
...
releases api.
2014-12-19 14:56:40 +00:00
a8cf910f51
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
README.md
_locales/en/messages.json
changelog.html
js/backup_restore.js
js/data_storage.js
js/msp.js
js/protocols/stm32.js
js/serial_backend.js
main.css
main.html
main.js
manifest.json
tabs/auxiliary_configuration.css
tabs/default.css
tabs/firmware_flasher.js
tabs/initial_setup.css
tabs/initial_setup.html
tabs/initial_setup.js
tabs/modes.html
tabs/modes.js
tabs/motor_outputs.css
tabs/motors.html
tabs/receiver.css
tabs/servos.js
2014-12-18 22:40:03 +00:00
d86d697690
Update messages.json
...
Warning that this flashing can potentially wipe settings
2014-12-10 10:22:13 +00:00
9cf60224b2
Added Warning Cell Voltage
...
Added Warning Cell Voltage to Battery voltage in Configuration tab. When battery has deployed to level that is defined with warning cell voltage buzzer starts slow beeping and copter can still land safely. When min voltage is reached beeper start fast "screaming" and LIPO is empty (to point when it could be damaged from over discharging if using that default 3.3V).
2014-12-09 10:37:02 +02:00
5e165b286b
implemented simple review mechanism
2014-11-21 08:40:43 +01:00
7ff93d5781
add link pointing to baseflight wiki on github
...
#57
2014-11-16 18:42:35 +01:00
97e37347d6
implementing the highly wanted select box for hand picking firmware builds that are available on baseflight.net
2014-11-10 21:33:32 +01:00
91971f3871
Update message regarding cli exit which now has different behaviour.
2014-11-10 01:00:28 +01:00
902da2f91d
Add 'Adjustments' tab.
...
Cleanup 'Auxilary' tab code.
Rename other tabs to have shorter titles.
2014-11-09 00:46:12 +00:00
ad005a3f1c
revamped option part of firmware flasher UI
2014-10-24 16:55:42 +02:00
ed7600facc
implement support for flashing development firmware (first iteration, done via checkbox)
2014-10-24 15:36:19 +02:00
2733f4832e
Retrieve and display MSP API Version from new MSP_API_VERSION command.
...
Requires latest firmware.
2014-10-18 16:58:49 +01:00
a08ae2b7c6
Update donation links.
2014-10-14 16:32:45 +01:00
7400a2af2f
Internationalize mode range copy.
2014-10-13 18:59:26 +01:00
3d64b87578
add callbacks to backup and restore procedures, attach success messages in callbacks, hook up analytic events
2014-10-06 16:07:47 +02:00
cd4c7a8160
add SERVO_CONFIG to backup file, restoring old version will throw compatibility error
2014-10-06 15:24:34 +02:00
6968faaac9
more rcmap select box options and tooltip with visual clue
2014-09-30 15:33:28 +02:00
fe4240deb7
rssi_aux_channel support in receiver tab, hybrid box bugfixes
2014-09-24 16:01:23 +02:00
6be76d855d
implement channel map including validation and UI compatibility fallback
2014-09-19 17:44:04 +02:00
1d3b2e57fc
another attempt to cleanup the initial tab
2014-09-18 14:44:42 +02:00
0c175725b1
support for currentscale and currentoffset, ui fully working both read and write
2014-09-18 13:21:48 +02:00
f2ac7369de
add gps info block to fill some of the whitespace
2014-09-18 12:54:59 +02:00
6f9c5cb6f2
multiwiicurrentoutput checkbox, BF_CONFIG will be extended when firmware updates
2014-09-17 23:00:57 +02:00
4b40695ace
swap groups according to request
2014-09-17 20:19:22 +02:00
ba046031ed
add midthrottle (midRc) as requested, placeholder multiwiicurrentoutput variable
2014-09-17 20:13:13 +02:00
ee0dec96d8
gps related configuration
2014-09-17 17:46:21 +02:00
ce53bc99f2
add serial rx type configuration write/read working
2014-09-17 17:02:16 +02:00
370ad21f85
desc text for throttle and battery category
2014-09-17 16:19:20 +02:00
c537616a39
hooked up (mostly palceholder) text to various inputs
2014-09-17 16:08:40 +02:00
ab8d8e1a56
board alignment, accel trim, mag declination
2014-09-17 15:44:28 +02:00
a34357d92a
initializing input elements for throttle and battery, changed to 2 row design
2014-09-17 15:20:21 +02:00
c352199434
working mixer list with mixer preview
2014-09-17 14:22:16 +02:00
fdbfdfd31d
working feature selection (both read and write), missing description and nicer text
2014-09-17 13:01:46 +02:00
945b86f9b2
rename translation shortcuts, drop configuration files in
2014-09-17 10:31:36 +02:00
4fd36df425
renaming auxiliary tab
2014-09-17 09:56:50 +02:00
df738f9daf
new device messages that indicate reboot and ready states
2014-09-16 19:26:38 +02:00
7de9d1099b
Update baseflight specific message in firmware flasher for cleanflight.
2014-09-04 03:22:20 +01:00
bf13a11dc2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
changelog.html
js/data_storage.js
js/protocols/stm32.js
manifest.json
tabs/auxiliary_configuration.js
tabs/default.css
tabs/default.html
tabs/firmware_flasher.js
tabs/servos.js
2014-09-04 01:40:24 +01:00
37de8dfefa
new simplified flasher status UI
2014-08-30 10:30:28 +02:00
bed74a5f62
add note about flash slowly to explain its purpose
2014-08-30 09:08:08 +02:00
322af92d45
add / implement flash slowly option in firmware flasher
...
this will allow flashing via serial adapters that doesn't support 921600
flashing via various bluetooth adapters will be also possible now
(untested)
2014-08-30 08:59:21 +02:00
81e4211cc3
text polish
2014-08-24 23:39:19 +01:00
5bfc81e317
text polish
2014-08-18 19:28:06 +02:00
026f01434a
moving backers to sponsors block
2014-08-06 15:11:11 +02:00
1688b41eb2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
changelog.html
main.js
2014-07-20 01:01:25 +01:00
58f933e92c
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
tabs/auxiliary_configuration.html
tabs/auxiliary_configuration.js
tabs/receiver.css
2014-07-07 19:45:33 +01:00
71c0cb65b3
display true heading and heading offset inside 3D cube area
2014-07-06 11:24:18 +02:00
Dominic Clifton
tricopterY
Nicholas Sherlock
Richard Birkby
Roeland Lutters
Paul Rogalinski
UKTamo
jaahaavi
cTn