2662f64e83
Remove ONESHOT125 and Change Some names
2016-06-19 23:55:22 +02:00
67f6818700
Work on moving all rates to PID tab.
...
Work on moving all rates to PID tab.
Finished move of rate courve to PID tab.
2016-06-19 19:46:05 +12:00
dc786c42c5
Led Stip CSS cleanup
2016-06-17 19:47:09 +02:00
46f6b9cd5f
Color theme change
2016-06-11 04:38:24 +02:00
b913ae57bd
Merge pull request #376 from digitalentity/mavlink-telem
...
Support for MAVLink telemetry
2016-05-12 14:08:46 +02:00
a8143e11c1
Support for MAVLink telemetry
2016-05-06 21:04:31 +10:00
0518ed6993
Issue #74 : Show battery & statuses in top bar
...
- Battery voltage appears as a horizontal bar
- Autodetection of battery type is used to calculate the bar min, max &
alarm values according to the battery configuration parameters.
- Color changes to red when battery level goes under the alarm setting
- Armed, failsafe and Serial Link status icons below battery voltage
monitor
- Change calibration button contents to "Calibrating" during calibration
2016-04-20 01:38:23 +02:00
103cc3195c
Update links and recovery procedure.
2016-02-22 19:12:34 +01:00
ebd77db93f
Merge pull request #323 from dan557/development
...
Add Current and Voltage readout on configuration tab
2016-02-05 03:21:38 +01:00
ed9927a4e5
Merge branch 'page-size' of https://github.com/tracernz/cleanflight-configurator into tracernz-page-size
2016-01-30 12:18:30 +01:00
9fbb6337b6
DFU: Support STM32F4
2016-01-28 22:48:44 +13:00
b46a5e8053
USB-DFU: Detect flash page size from USB descriptor
2016-01-25 19:27:26 +13:00
1a58bfcf82
Add Race Transponder configuration support.
...
Also cleans up i18n support for 'features' and adds tooltip support for
them on the configuration tab.
2016-01-22 22:15:53 +01:00
59729712e9
Add Configuration Battery Current
2016-01-20 17:42:51 +00:00
4ccd0bed3e
Merge branch 'development' into thenickdude-private-development
...
Conflicts:
js/data_storage.js
main.css
tabs/dataflash.css
tabs/dataflash.html
2016-01-07 20:58:29 +01:00
b6a55f247a
Shortening labels for sensor alignment
2016-01-07 03:18:05 +01:00
25e97902c4
Merge branch 'tooltip_i18n_title_review' of https://github.com/tricopterY/cleanflight-configurator into tricopterY-tooltip_i18n_title_review
2016-01-07 00:36:47 +01:00
14135cb64e
Cleanup board/sensor alignment UI.
2016-01-07 00:31:34 +01:00
24a82dac93
Merge branch 'cleanflight/development' into NewPIDFunctions
2015-12-18 17:59:38 +01:00
779af35d33
Fix error on servos page when servos not supported by the target.
2015-12-18 14:48:08 +01:00
50f1269e0b
jBox Tooltip implementation using i18n_title instead of jBox:Content - reduces DOM element counts
2015-12-18 21:36:31 +11:00
3228625de1
jBox Tooltip implementation using i18n_title instead of jBox:Content - reduces DOM element counts
2015-12-18 13:43:05 +11:00
251712c85d
Merge branch 'development' into thenickdude-private-development
...
Conflicts:
js/msp.js
2015-12-18 01:56:57 +01:00
843e42e826
Merge branch 'cleanflight/development' into NewPIDFunctions
2015-12-16 13:59:29 +01:00
7618363449
Improve CLI mode entry/exit detection. Fixes #285 .
...
Disconnects and reconnects for VCP boards. After manually saving or
exiting on non VCP boards the setup tab will be shown.
See
https://github.com/cleanflight/cleanflight-configurator/issues/285#issuecomment-165096715
2015-12-16 13:55:35 +01:00
61ef07a46f
sync
2015-12-16 12:59:30 +01:00
cccb0423b5
Merge branch 'development' into thenickdude-private-development
2015-12-16 11:04:43 +01:00
84ef7f23d7
Minor typo fixes and cleanup
2015-12-16 07:16:25 +11:00
55a2677a2b
Merge branch 'development' into thenickdude-private-development
...
Conflicts:
js/data_storage.js
js/gui.js
js/msp.js
main.html
tabs/dataflash.css
tabs/dataflash.js
2015-12-15 12:35:52 +01:00
2d6feb0e6a
Merge branch 'cleanflight/development' into NewPIDFunctions
...
# Conflicts:
# _locales/en/messages.json
# js/backup_restore.js
# js/data_storage.js
# js/msp.js
# tabs/configuration.html
2015-12-15 01:43:24 +01:00
bd98aca67f
Merge branch 'new_stuff' of
...
https://github.com/skaman82/cleanflight-configurator into
skaman82-new_stuff
Fix up messages.json formatting.
Conflicts:
_locales/en/messages.json
2015-12-15 00:51:42 +01:00
4deec20727
Cleanup and highlight recovery process to cut down on support emails.
2015-12-14 23:59:40 +01:00
c095a55b0e
Remove OPBL message now that cleanflight releases no-longer include OPBL
...
compatible binaries.
2015-12-14 23:00:35 +01:00
84b2c415c2
Fix a couple of typos.
2015-12-14 22:57:35 +01:00
ae67707e0d
Updating failsafe version message.
2015-12-14 22:56:41 +01:00
c6dc8146b0
Merge branch 'failsafe_tab_pull_request' of https://github.com/ProDrone/cleanflight-configurator into ProDrone-failsafe_tab_pull_request
2015-12-14 22:12:17 +01:00
a091d8c2ad
Add support for LTM telemetry in Cleanflight v1.12.0 / MSP API 1.15
2015-12-14 21:28:22 +01:00
c498e7de34
Added support for failsafe TAB
...
Made in cooperation with skaman82.
Summary of modifications:
- Extended data storage to hold data for new/changed MSP messages.
- Added support for added/changed MSP messages.
- Added assigned mode(s) to AUX labels.
- Tooltip changes.
- Included style modifications to configuration tab from Skaman82.
- Moved all texts from failsafe tab .html to `messages.json`.
- Removed failsafe settings from configuration tab (now obsolete).
- Added failsafe-tab variables to Backup & Restore.
- Reorganized stage 2 elements, cleanup and corrections.
2015-12-13 17:50:26 +01:00
136d2edd44
New tooltip in config tab
2015-12-10 12:54:03 +01:00
4b966dca4b
come corrections
2015-12-10 12:43:01 +01:00
ddecea7a37
adding tooltips to receiver tab
2015-12-10 12:34:04 +01:00
4658538c11
placing text in the language file
2015-12-10 01:26:05 +01:00
4de47c690c
addin sensor alignment inputs in config tab
2015-12-08 15:33:17 +01:00
a2bdf9f7e2
Correcting the setting names
2015-12-08 10:06:05 +01:00
2279edd5ba
Including changes from NightHawk32
2015-12-07 02:51:06 +01:00
4e12db9c5e
Convert dataflash tab to a new Blackbox tab with SD card support
2015-12-04 15:49:51 +13:00
db1627c29c
Placing text in the language file
2015-12-02 23:45:31 +01:00
f8f02c7de6
better styling for documentation tab
2015-11-21 17:25:49 +01:00
1eaf63145d
fixing typo
2015-11-18 14:11:07 +01:00
b0d0f40c41
Adding labels for AUX 9-16
2015-11-17 00:50:57 +00:00
e801cd260a
Merge branch 'master' of https://github.com/NightHawk32/cleanflight-configurator into NightHawk32-master
2015-11-16 21:44:11 +00:00
57baf8707c
Update some i18n labels to use the correct casing (camelCase) and the
...
correct prefix "pidTuning". The prefixes generally seems to match the
tab source files.
2015-11-16 21:38:59 +00:00
d9f65d50d3
PID Tab: moving english text into json file
2015-11-16 21:28:48 +00:00
d66430eb66
reformatting the note in cli tab to mach the others
2015-11-13 11:45:41 +01:00
19ca1024d0
reformating the notes in the warning section of firmware flasher
2015-11-13 11:40:14 +01:00
904a55c930
Adding fixes for 3D to the newest version
...
Merge remote-tracking branch 'upstream/master'
Conflicts:
tabs/configuration.html
2015-11-12 17:34:21 -05:00
31cd2de3d3
Added 3D configuration parameters so they don't have to be changed in the CLI
2015-11-11 16:05:24 -05:00
e429cf623d
placing tooltip content into the json file
2015-11-11 11:54:56 +01:00
556ec7f8c4
Fixed a broken link in the landing tab (blackbox) and some added color to some messages
2015-11-09 11:53:28 +01:00
fb298047f7
Servos Tab rework + small fix for Flasher Tab
2015-11-08 13:56:01 +01:00
ae453edb42
Landing Tab rework
2015-11-07 06:16:02 +01:00
0f30b16ec8
Modes Tab rework, added new colors to Receiver Tab
2015-11-03 05:36:04 +01:00
5506a3277c
fixing some things after rebase
2015-11-02 23:41:10 +01:00
9be277e987
fixing things
2015-11-02 22:23:39 +01:00
06f643812d
sync
2015-11-02 22:07:37 +01:00
d2be1715e5
Display header elements depending on connection state
2015-11-02 11:56:18 +01:00
3ba9f89572
Cleanup of the CLI Tab, adding back the CF logo
2015-11-01 23:56:16 +01:00
6c6c3ca439
Added new styling for GPS Fix true/false state
2015-10-30 00:27:23 +01:00
d0d32d07fe
Adjusting green color in the message file
2015-10-29 23:18:06 +01:00
87e9bfd3d9
...restoring some files
2015-10-23 15:42:32 +02:00
3a9c7f3794
Merge remote-tracking branch 'origin/baseflight-configurator-development' into GUI-rework
...
Conflicts:
README.md
js/libraries/d3.min.js
js/msp.js
main.html
2015-10-23 14:41:08 +02:00
f4539ed413
text shortening
2015-10-23 08:18:19 +02:00
eb2aa5b4e5
Allow configuration of servo angle at min/max from GUI.
...
Closes #193
2015-10-14 20:27:47 +01:00
d1396d8918
Merge pull request #224 from sherlockflight/msp-rx
...
Add control sticks for MSP Rx, suitable for debugging CF without a Tx
2015-10-14 20:09:10 +01:00
eeb45e63df
Formatting Fixes
2015-09-29 23:45:53 -05:00
4d959d7b93
Edits for adding Roll, Pitch, and Heading to Setup Page
2015-09-29 23:36:07 -05:00
ef0c637877
Add control sticks for MSP Rx, suitable for debugging CF without a Tx
2015-08-30 02:23:40 +12:00
fb46711659
Cleanup looptime configuration.
2015-07-13 19:07:39 +01:00
be93f37416
Merge branch 'looptime' of https://github.com/tricopterY/cleanflight-configurator into tricopterY-looptime
2015-07-13 18:18:18 +01:00
12048ac7c1
Update links and sponsors.
2015-07-13 02:31:14 +01:00
687c0f1a84
Remove legacy servo configuration which originated from the overloaded
...
use of the servo 'rate'. All servos are free to be configured
regardless of whether the mixer actually uses those servos.
2015-07-13 02:01:19 +01:00
c0138f5f82
Sprinkle some help for common causes of error to reduce burned on
...
developers and community.
2015-07-12 21:35:25 +01:00
17d525352f
Allow FC loop time change via Configuration Tab
2015-05-26 16:28:58 +10:00
774fcf5f68
Merge commit '34e8c55a006ed3a2a989bf4e57c32bfa2e56f35b' into development
...
Conflicts:
js/msp.js
2015-05-25 23:43:52 +01:00
41cd7f3f18
Update motors tab to handle armed state. Re-order HTML elements on
...
motors tab.
2015-05-25 23:07:08 +01:00
34c6077b5c
Yaw Expo Feature
2015-05-22 21:37:01 +02:00
3086a98828
Add support for manual baud rate selection to firmware flasher.
2015-05-22 02:29:29 +01:00
d749304ec4
Fix missing slash in a url.
2015-05-20 19:12:58 +01:00
2e6f5aa4d4
Prepare for release.
2015-05-20 15:37:28 +01:00
5f05e4c8cc
Support inflight pitch/roll rate adjustments for fc version >= 1.8.0 and
...
pitch p,i,d and roll p,i,d adjustments for fc version => 1.9.1
2015-05-18 00:09:29 +01:00
f560ffa924
Fix missing whitespace in the mag calibration message.
2015-05-17 23:10:12 +01:00
cabeba70f7
checkbox to show dev releases, code refactoring
2015-05-17 23:01:27 +01:00
16e5ab57be
Add SPRacing and Paris Air Hero 32 to the list of boards.
2015-05-17 00:12:18 +01:00
99e11b65ce
Updated sponsors list. Add link to t-shirts.
2015-04-09 11:31:21 +01:00
045d2b0ca4
Use updated IDs for MSP_LOOP_TIME and MSP_SET_LOOP_TIME. Cleanup and
...
fix backup/restore arming config. Backup restore/looptime. Add config
migration of looptime and arming config. Rename MSP_RCMAP to
MSP_RX_MAP to match cleanflight code.
2015-03-29 15:01:54 +01:00
8ee749afe0
Added configurationAutoDisarmDelay and configurationDisarmKillSwitch
2015-03-14 11:11:50 +11:00
b2be2853b4
Provide a migration path from pre-1.8.0 firmware backups.
2015-03-11 23:34:24 +00:00
4b2704e784
Support independent configuration of pitch and roll rates. Cleanup of
...
tpa breakpoint configuration support.
2015-03-11 22:50:07 +00:00
6380a7a821
Merge pull request #8 from tricopterY/development
...
development sync
2015-03-11 14:07:33 +11:00
d0fc671651
Update messages.json
...
Added pidTuningTPABreakPoint
2015-03-10 15:02:14 +11:00
67c8cdcaac
Internationalise the Telemetry port dropdown option for 'Disabled'.
2015-03-05 15:57:23 +00:00
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
c3f1c13d54
Move Documentation and Support links to separate tab. Add a
...
contributing section. Unify help/landing section CSS/html a little.
Expand the sponsors panel area in preparation for an updated section.
2015-03-03 16:27:40 +00:00
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
ede3c367f2
Error message for saving to disallowed dir,fix flash save problem on osx
2015-02-27 09:14:47 +13:00
831e4a848e
Merge branch 'blackbox-flash' of
...
https://github.com/sherlockflight/cleanflight-configurator-dev into
sherlockflight-blackbox-flash
Conflicts:
_locales/en/messages.json
2015-02-22 21:51:18 +00:00
f89aaa1011
Add flight instruments to setup tab
2015-02-20 01:18:49 +00:00
ed285992da
Detect support for flash chip and disable tab if not available
2015-02-16 18:05:24 +13:00
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
506e9c43fb
Fix link for IRC web client.
2015-01-29 15:36:22 +01:00
975e863bd0
Enhance welcome tab by adding documentation and support panels with
...
links.
2015-01-29 05:21:02 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
f480e05027
Merge branch 'led-strip' into development
2015-01-16 17:24:13 +00:00
7a674c9ab2
Display a message when the LED strip configuration has been saved.
...
Remove the old CLI panel.
2015-01-16 00:29:16 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
9b083c9bb9
Update messages adjustments
...
Update messages adjustments PID to more accurate versions.
2015-01-12 08:26:25 +01:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
e4bc970680
Use i18n for tab switch message.
2015-01-08 11:38:10 +00:00
3a4ea7e1c1
Update messaging used when api version is incompatible.
2015-01-08 01:50:35 +00:00
6031907163
Merge branch 'development' of https://github.com/Roeland54/cleanflight-configurator into Roeland54-development
2015-01-08 01:37:19 +00:00
f5ba166c15
Add failsafe feature to RX section.
2015-01-08 01:06:42 +00:00
0285723fab
First cut of working configuration migration.
2015-01-07 20:15:22 +00:00
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
272cfea963
Merge branch 'master' into development
...
* master:
CLI available for old firmware versions
2015-01-06 20:38:05 +01:00
32a27b73a7
CLI available for old firmware versions
2015-01-06 20:35:58 +01:00
6df04c151a
Updating link to releases.
2015-01-05 11:47:17 +00:00
26d6c1a562
Allow baud rate configuration on the Configuration tab.
2015-01-04 10:28:32 +00:00
bfa689be40
Overhaul of the configuration tab.
2015-01-04 08:09:10 +00:00
b905632f0e
Merge branch 'UKTamo-patch-1' into development
2015-01-03 01:15:02 +00:00
c58ca02d8f
Merge branch 'patch-1' of https://github.com/UKTamo/cleanflight-configurator into UKTamo-patch-1
2015-01-03 01:14:36 +00:00
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
fe72557b12
Removing more review related code. Adding skeleton of new Ports tab.
2015-01-02 19:31:50 +00:00
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
0aa33393c4
Improve firmware flasher messaging.
2014-12-26 18:20:45 +00:00
7a800444b5
Force the user to pick a fimrware before loading
2014-12-25 00:02:18 +01:00
a7dc838cdc
Removing review code.
2014-12-24 18:58:29 +00:00
29018001c0
Change the text on the 'Save' button on the Configuration to 'Save and
...
Reboot' to reflect it's behaviour.
2014-12-21 14:45:06 +00:00
b58ffa9994
Rename 'Auxilary' tab to 'Modes' to be more user friendly.
2014-12-21 14:37:00 +00:00
7522d97092
Adjust tab titles for simplicity.
2014-12-21 14:14:53 +00:00
2be5eedf18
Add message about `dump` command to backup/restore note.
2014-12-21 12:38:22 +00:00
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
e1d2fb3163
Update hardware list (sparky, cc3d, cjmcu, etc).
2014-12-21 00:37:18 +00:00
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
ccc0b839e6
Minor tweaks to the firmwre flasher.
2014-12-19 19:48:19 +00:00
c6867d3c52
Update the firmware flasher to provide more details about the release.
...
Add warning message about target selection.
2014-12-19 16:04:42 +00:00
U-DESKTOP-12PPI61\boris.bozic
mikeller
skaman82
Dominic Clifton
Konstantin Sharlaimov (DigitalEntity)
gael
Michael Corcoran
dan557
skaman82
tricopterY
Nicholas Sherlock
Albert Kravcov
NightHawk32
Austin St. Aubin
Paul Rogalinski
Richard Birkby
Roeland Lutters