betaflight-configurator/_locales/en/messages.json

990 lines
33 KiB
JSON
Raw Normal View History

{
2014-05-06 16:07:32 +00:00
"translation_version": {
"message": "0"
},
2014-04-22 14:29:18 +00:00
"options_title": {
"message": "Application Options"
},
"options_receive_app_notifications": {
"message": "Receive desktop <strong>notification</strong> when application updates"
},
"options_improve_configurator": {
"message": "Send anonymous usage data to the developer team"
},
2014-12-24 18:58:29 +00:00
"connect": {
"message": "Connect"
},
"connecting": {
"message": "Connecting"
},
"disconnect": {
"message": "Disconnect"
},
"autoConnect": {
"message": "Auto-Connect"
},
"autoConnectEnabled": {
"message": "Auto-Connect: Enabled - Configurator automatically tries to connect when new port is detected"
},
"autoConnectDisabled": {
"message": "Auto-Connect: Disabled - User needs to select the correct serial port and click \"Connect\" button on its own"
},
"deviceRebooting": {
"message": "Device - <span style=\"color: red\">Rebooting</span>"
},
"deviceReady": {
"message": "Device - <span style=\"color: green\">Ready</span>"
},
"backupFileIncompatible": {
"message": "Backup file provided was generated for previous version of the configurator and is incompatible with this version of configurator. Sorry"
},
"backupFileUnmigratable": {
"message": "Backup file provided was generated by a previous version of the configurator and is not migratable. Sorry."
},
"configMigrationFrom": {
"message": "Migrating configuration file generated by configurator: $1"
},
"configMigratedTo": {
"message": "Migrated configuration to configurator: $1"
},
"configMigrationSuccessful": {
"message": "Configuration migration complete, migrations applied: $1"
},
"tabFirmwareFlasher": {
"message": "Firmware Flasher"
},
"tabLanding": {
"message": "Welcome"
},
"tabSetup": {
"message": "Setup"
},
"tabConfiguration": {
"message": "Configuration"
},
"tabPorts": {
"message": "Ports"
},
"tabPidTuning": {
"message": "PID Tuning"
},
"tabReceiver": {
"message": "Receiver"
},
"tabModeSelection": {
2014-09-17 07:56:50 +00:00
"message": "Mode Selection"
},
"tabServos": {
"message": "Servos"
},
"tabGPS": {
"message": "GPS"
},
"tabMotorTesting": {
2014-12-21 14:14:53 +00:00
"message": "Motors"
},
"tabLedStrip": {
"message": "LED Strip"
},
"tabRawSensorData": {
2014-12-21 14:14:53 +00:00
"message": "Sensors"
},
"tabCLI": {
"message": "CLI"
},
"tabLogging": {
2014-05-22 10:13:16 +00:00
"message": "Logging"
},
"tabAdjustments": {
"message": "Adjustments"
},
"tabAuxiliary": {
"message": "Modes"
},
"serialPortOpened": {
"message": "Serial port <span style=\"color: green\">successfully</span> opened with ID: $1"
},
2014-05-06 14:30:53 +00:00
"serialPortOpenFail": {
"message": "<span style=\"color: red\">Failed</span> to open serial port"
},
"serialPortClosedOk": {
"message": "Serial port <span style=\"color: green\">successfully</span> closed"
},
"serialPortClosedFail": {
"message": "<span style=\"color: red\">Failed</span> to close serial port"
},
"noConfigurationReceived": {
"message": "No configuration received within <span style=\"color: red\">10 seconds</span>, communication <span style=\"color: red\">failed</span>"
},
"firmwareVersionNotSupported": {
"message": "This firmware version is <span style=\"color: red\">not supported</span>. Please upgrade to firmware that supports api version <strong>$1</strong> or higher. Use CLI for backup before flashing. CLI backup/restore procedure is in the documention."
},
"tabSwitchConnectionRequired": {
"message": "You need to <strong>connect</strong> before you can view any of the tabs."
},
"tabSwitchWaitForOperation": {
"message": "You <span style=\"color: red\">can't</span> do this right now, please wait for current operation to finish ..."
},
"tabSwitchUpgradeRequired": {
"message": "You need to <strong>upgrade</strong> your firmware before you can use the $1 tab."
},
2014-05-06 14:30:53 +00:00
"firmwareVersion": {
"message": "Firmware Version: <strong>$1</strong>"
},
"apiVersionReceived": {
"message": "MultiWii API version <span style=\"color: green\">received</span> - <strong>$1</strong>"
},
2014-05-06 14:30:53 +00:00
"uniqueDeviceIdReceived": {
"message": "Unique device ID <span style=\"color: green\">received</span> - <strong>0x$1</strong>"
},
2015-01-02 19:27:43 +00:00
"boardInfoReceived": {
"message": "Board: <strong>$1</strong>, version: <strong>$2</strong>"
},
"buildInfoReceived": {
"message": "Running firmware released on: <strong>$1</strong>"
},
"fcInfoReceived": {
"message": "Flight controller info, identifier: <strong>$1</strong>, version: <strong>$2</strong>"
},
"notifications_app_just_updated_to_version": {
"message": "Application just updated to version: $1"
},
"notifications_click_here_to_start_app": {
"message": "Click here to start the application"
},
"statusbar_port_utilization": {
"message": "Port utilization:"
},
"statusbar_usage_download": {
"message": "D: $1%"
},
"statusbar_usage_upload": {
"message": "U: $1%"
},
"statusbar_packet_error": {
"message": "Packet error:"
},
2014-06-16 12:13:30 +00:00
"statusbar_i2c_error": {
"message": "I2C error:"
},
"statusbar_cycle_time": {
"message": "Cycle Time:"
2014-05-06 14:45:26 +00:00
},
"please_grant_usb_permissions": {
"message": "Please click on <strong>\"Request Optional Permissions\"</strong> button to grant application <strong style=\"color: red\">required</strong> <strong>USB</strong> access"
},
"usb_permissions_granted": {
"message": "Optional <strong>USB</strong> permissions <strong style=\"color: green\">granted</strong>"
},
2014-05-06 14:45:26 +00:00
"eeprom_saved_ok": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
},
"default_optional_permissions_head": {
"message": "Optional USB Permissions"
},
"default_optional_permissions_text": {
"message": "Due to addition of <strong>Naze32PRO</strong> to the supported hardware family, Configurator <strong style=\"color: red\">requires</strong> USB access to allow firmware flashing via DFU"
},
"default_request_optional_permissions": {
"message": "Request Optional Permissions"
},
2014-05-06 14:45:26 +00:00
"defaultWelcomeText": {
"message": "Welcome to <strong>Cleanflight - Configurator</strong>, a utility designed to simplify updating, configuring and tuning of your flight controller.<br /><br />The application supports all hardware that can run cleanflight (sparky, cc3d, acro naze, naze, afromini, flip32, flip32+, cjmcu, chebuzz f3, stm32f3discovery, naze32pro, etc)<br /><br />The firmware source code can be downloaded from <a href=\"https://github.com/cleanflight/cleanflight\" title=\"www.github.com\" target=\"_blank\">here</a><br />The newest binary firmware image is available <a href=\"https://github.com/cleanflight/cleanflight/releases\" title=\"www.github.com\" target=\"_blank\">here</a><br /><br />Latest <strong>CP210x Drivers</strong> can be downloaded from <a href=\"http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx\" title=\"http://www.silabs.com/\" target=\"_blank\">here</a><br />"
2014-05-06 14:45:26 +00:00
},
"defaultChangelogHead": {
"message": "Configurator - Changelog"
},
"defaultButtonFirmwareFlasher": {
"message": "Firmware Flasher"
},
"defaultDonateHead": {
"message": "Open Source / Donation Notice"
},
"defaultDonateText": {
2014-06-01 19:43:03 +00:00
"message": "This utility is fully <strong>open source</strong> and is available free of charge to all <strong>cleanflight</strong> users.<br />If you found the cleanflight or cleanflight configurator useful, please consider <strong>supporting</strong> its development by donating."
},
"defaultSponsorsHead": {
"message": "Sponsors"
},
"defaultDocumentationHead": {
"message": "Documentation / Manual"
},
"defaultDocumentation": {
"message": "Cleanflight documentation is available in Markdown and PDF formats.<br /><br />The PDF manual appropriate to the firmware can be downloaded from the github releases page, <a href=\"https://github.com/cleanflight/cleanflight/releases\" target=\"_blank\">here</a>.<br />The Markdown latest online documentation is available <a href=\"https://github.com/cleanflight/cleanflight/tree/master/docs\" target=\"_blank\">here</a> - you can switch to the appropriate version of the documentation by selecting the tag."
},
"defaultSupportHead": {
"message": "Support"
},
"defaultSupport": {
2015-01-29 14:36:22 +00:00
"message": "For support please search the forums first or contact your vendor.<br /><br />RC Groups thread is <a href=\"http://www.rcgroups.com/forums/showthread.php?t=2249574&page=1\" target=\"_blank\">here</a>. MultiWii forums thread is <a href=\"http://www.multiwii.com/forum/viewtopic.php?f=23&t=5149\" target=\"_blank\">here</a>.<br /><br />Developers and users hang out in IRC channel on freenode<br /><a href=\"irc://irc.freenode.net/#cleanflight\" target=\"_blank\">irc://irc.freenode.net/#cleanflight</a> or <a href=\"http://webchat.freenode.net/?channels=cleanflight\" target=\"_blank\">Join via web client</a>."
},
"initialSetupBackupAndRestoreApiVersion": {
"message": "<span style=\"color: red\">Backup and restore functionality disabled.</span> You have firmware with API version <span style=\"color: red\">$1</span>, backup and restore requires <span style=\"color: green\">$2</span>. Please backup your settings via the CLI, see Cleanflight documentation for procedure."
},
2014-05-06 16:07:32 +00:00
"initialSetupButtonCalibrateAccel": {
"message": "Calibrate Accelerometer"
},
"initialSetupCalibrateAccelText": {
"message": "Place board or frame on <strong>leveled</strong> surface, proceed with calibration, ensure platform is not moving during calibration period"
2014-05-06 16:07:32 +00:00
},
"initialSetupButtonCalibrateMag": {
"message": "Calibrate Magnetometer"
},
"initialSetupCalibrateMagText": {
"message": "Move multirotor atleast <strong>360</strong> degrees on all axis of rotation, you have 30 seconds to perform this task"
2014-05-06 16:07:32 +00:00
},
"initialSetupButtonReset": {
"message": "Reset Settings"
},
"initialSetupResetText": {
"message": "Restore settings to <strong>default</strong>"
2014-05-06 16:07:32 +00:00
},
"initialSetupButtonBackup": {
"message": "Backup"
},
"initialSetupButtonRestore": {
"message": "Restore"
},
"initialSetupBackupRestoreText": {
"message": "<strong>Backup</strong> your configuration in case of an accident, <strong>CLI</strong> settings are <span style=\"color: red\">not</span> included - See 'dump' cli command"
2014-05-06 16:07:32 +00:00
},
"initialSetupBackupSuccess": {
"message": "Backup saved <span style=\"color: green\">successfully</span>"
},
"initialSetupRestoreSuccess": {
"message": "Configuration restored <span style=\"color: green\">successfully</span>"
2014-05-06 16:07:32 +00:00
},
"initialSetupButtonResetZaxis": {
"message": "Reset Z axis, offset: 0 deg"
},
"initialSetupButtonResetZaxisValue": {
"message": "Reset Z axis, offset: $1 deg"
2014-05-06 16:07:32 +00:00
},
"initialSetupMixerHead": {
"message": "Mixer Type"
},
2014-05-06 16:07:32 +00:00
"initialSetupThrottleHead": {
"message": "Throttle Settings"
},
"initialSetupMinimum": {
"message": "Minimum:"
},
"initialSetupMaximum": {
"message": "Maximum:"
},
"initialSetupFailsafe": {
"message": "Failsafe:"
},
"initialSetupMinCommand": {
"message": "MinCommand:"
},
"initialSetupBatteryHead": {
"message": "Battery"
},
"initialSetupMinCellV": {
"message": "Min Cell Voltage:"
},
"initialSetupMaxCellV": {
"message": "Max Cell Voltage:"
},
"initialSetupVoltageScale": {
"message": "Voltage Scale:"
},
"initialSetupAccelTrimsHead": {
"message": "Accelerometer trims"
},
"initialSetupPitch": {
"message": "Pitch:"
},
"initialSetupRoll": {
"message": "Roll:"
},
"initialSetupMagHead": {
"message": "Magnetometer"
},
"initialSetupDeclination": {
"message": "Declination:"
},
"initialSetupInfoHead": {
"message": "Info"
},
"initialSetupBattery": {
"message": "Battery voltage:"
2014-05-06 16:07:32 +00:00
},
"initialSetupBatteryValue": {
"message": "$1 V"
},
"initialSetupDrawn": {
"message": "Capacity drawn:"
},
"initialSetupDrawing": {
"message": "Current draw:"
},
"initialSetupBatteryMahValue": {
"message": "$1 mAh"
},
2014-05-29 23:41:27 +00:00
"initialSetupBatteryAValue": {
"message": "$1 A"
},
2014-05-06 16:07:32 +00:00
"initialSetupRSSI": {
"message": "RSSI:"
},
"initialSetupRSSIValue": {
"message": "$1 %"
},
"initialSetupGPSHead": {
"message": "GPS"
},
2014-05-06 16:07:32 +00:00
"initialSetupButtonSave": {
"message": "Save"
},
"initialSetupModel": {
"message": "Model: $1"
},
"initialSetupHeading": {
"message": "Heading: $1 deg"
},
2014-05-06 16:07:32 +00:00
"initialSetupAccelCalibStarted": {
"message": "Accelerometer calibration started"
},
"initialSetupAccelCalibEnded": {
"message": "Accelerometer calibration finished"
},
"initialSetupMagCalibStarted": {
"message": "Magnetometer calibration started"
},
"initialSetupMagCalibEnded": {
"message": "Magnetometer calibration finished"
},
"initialSetupSettingsRestored": {
"message": "Settings restored to <strong>default</strong>"
},
"initialSetupEepromSaved": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
},
"configurationFeatureEnabled": {
"message": "Enabled"
},
"configurationFeatureName": {
2015-01-04 08:09:10 +00:00
"message": "Feature"
},
"configurationFeatureDescription": {
"message": "Description"
},
"configurationMixer": {
"message": "Mixer"
},
"configurationFeatures": {
2015-01-04 08:09:10 +00:00
"message": "Other Features"
},
"configurationReceiver": {
"message": "Receiver Mode"
},
2015-01-08 01:00:22 +00:00
"configurationFailsafe": {
"message": "Receiver failsafe"
},
2015-01-04 08:09:10 +00:00
"configurationRSSI": {
"message": "RSSI (Signal Strength)"
},
"configurationEscFeatures": {
"message": "ESC/Motor Features"
},
"configurationFeaturesHelp": {
2015-01-04 08:09:10 +00:00
"message": "<strong>Note:</strong> Not all combinations of features are valid. When the flight controller firmware detects invalid feature combinations conflicting features will be disabled.<br /><strong>Note:</strong> Configure serial ports <span style=\"color: red\">before</span> enabling the features that will use the ports."
},
"configurationBoardAlignment": {
"message": "Board Alignment"
},
"configurationBoardAlignmentRoll": {
"message": "Roll Adjustment [deg]"
},
"configurationBoardAlignmentPitch": {
"message": "Pitch Adjustment [deg]"
},
"configurationBoardAlignmentYaw": {
"message": "Yaw Adjustment [deg]"
},
2015-01-04 08:09:10 +00:00
"configurationAccelTrims": {
"message": "Accelerometer Trim"
},
"configurationAccelTrimRoll": {
"message": "Accelerometer Roll Trim"
},
"configurationAccelTrimPitch": {
"message": "Accelerometer Pitch Trim"
},
"configurationMagDeclination": {
"message": "Magnetometer Declination [deg]"
},
"configurationThrottleMinimum": {
"message": "Minimum Throttle"
},
"configurationThrottleMid": {
"message": "Middle Throttle [RC inputs center value]"
},
"configurationThrottleMaximum": {
"message": "Maximum Throttle"
},
"configurationThrottleFailsafe": {
"message": "Failsafe Throttle"
},
"configurationThrottleMinimumCommand": {
"message": "Minimum Command"
},
"configurationBatteryVoltage": {
"message": "Battery Voltage"
2014-09-17 12:22:16 +00:00
},
"configurationBatteryMinimum": {
"message": "Minimum Cell Voltage"
},
"configurationBatteryMaximum": {
"message": "Maximum Cell Voltage"
},
"configurationBatteryWarning": {
"message": "Warning Cell Voltage"
},
"configurationBatteryScale": {
"message": "Voltage Scale"
},
"configurationCurrent": {
"message": "Current Sensor"
},
"configurationCurrentScale": {
"message": "Scale the output voltage to milliamps [1/10th mV/A]"
},
"configurationCurrentOffset": {
"message": "Offset in millivolt steps"
},
"configurationBatteryMultiwiiCurrent": {
"message": "Enable support for legacy Multiwii MSP current output"
},
"configurationGPS": {
"message": "GPS"
},
2015-01-04 08:09:10 +00:00
"configurationGPSProtocol": {
"message": "Protocol"
2014-09-17 15:46:21 +00:00
},
"configurationGPSBaudrate": {
2014-09-17 15:46:21 +00:00
"message": "Baudrate"
},
"configurationGPSubxSbas": {
"message": "Ground Assistance Type"
},
"configurationSerialRX": {
2015-01-04 08:09:10 +00:00
"message": "Serial Receiver Provider"
},
"configurationEepromSaved": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
},
"configurationButtonSave": {
"message": "Save and Reboot"
},
"portsHelp": {
"message": "Configure serial ports. <strong>Note:</strong> that not all ports support all scenarios and not all combinations of scenarios are valid. When the flight controller firmware detects this the serial port configuration will be reset."
},
"portsButtonSave": {
"message": "Save and Reboot"
},
"pidTuningUpgradeFirmwareToChangePidController": {
"message": "<span style=\"color: red\">Changing PID controller disabled - you can change it via the CLI.</span> You have firmware with API version <span style=\"color: red\">$1</span>, but this functionality requires requires <span style=\"color: green\">$2</span>."
},
2014-05-06 15:34:59 +00:00
"pidTuningName": {
"message": "Name"
},
"pidTuningProportional": {
"message": "Proportional"
},
"pidTuningIntegral": {
"message": "Integral"
},
"pidTuningDerivative": {
"message": "Derivative"
},
"pidTuningRollPitchRate": {
"message": "ROLL &amp; PITCH rate"
},
"pidTuningYawRate": {
"message": "YAW rate"
},
"pidTuningTPA": {
"message": "TPA"
},
"pidTuningButtonSave": {
"message": "Save"
},
"pidTuningButtonRefresh": {
"message": "Refresh"
},
"pidTuningProfileHead": {
"message": "Profile"
},
"pidTuningControllerHead": {
"message": "PID Controller"
},
2014-05-06 15:34:59 +00:00
"pidTuningLoadedProfile": {
"message": "Loaded Profile: <strong>$1</strong>"
},
"pidTuningDataRefreshed": {
"message": "PID data <strong>refreshed</strong>"
},
"pidTuningEepromSaved": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
2014-05-06 21:33:47 +00:00
},
"receiverThrottleMid": {
"message": "Throttle MID"
},
"receiverThrottleExpo": {
"message": "Throttle EXPO"
},
"receiverRcRate": {
"message": "RC Rate"
},
"receiverRcExpo": {
"message": "RC Expo"
},
"receiverChannelMap": {
"message": "Channel Map"
},
"receiverChannelMapTitle": {
"message": "You can define your own channel map by clicking inside the box"
},
2015-01-07 13:50:24 +00:00
"receiverRssiChannel": {
"message": "RSSI Channel"
},
2014-05-16 08:13:30 +00:00
"receiverRefreshRateTitle": {
"message": "Graph refresh rate"
},
2014-05-06 21:33:47 +00:00
"receiverButtonSave": {
"message": "Save"
},
"receiverButtonRefresh": {
"message": "Refresh"
},
"receiverDataRefreshed": {
"message": "RC Tuning data <strong>refreshed</strong>"
},
"receiverEepromSaved": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
2014-05-06 21:39:37 +00:00
},
2014-10-13 17:59:26 +00:00
"auxiliaryHelp": {
"message": "Use ranges to define the switches on your transmitter and corresponding mode assignments. A receiver channel that gives a reading between a range min/max will activate the mode. Remember to save your settings using the Save button."
2014-05-06 21:39:37 +00:00
},
2014-10-13 17:59:26 +00:00
"auxiliaryMin": {
"message": "Min"
2014-05-06 21:39:37 +00:00
},
2014-10-13 17:59:26 +00:00
"auxiliaryMax": {
"message": "Max"
2014-05-06 21:39:37 +00:00
},
2014-10-13 17:59:26 +00:00
"auxiliaryAddRange": {
"message": "Add Range"
2014-05-06 21:39:37 +00:00
},
"auxiliaryButtonSave": {
"message": "Save"
},
"auxiliaryEepromSaved": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
2014-05-06 21:57:57 +00:00
},
"adjustmentsHelp": {
"message": "Configure adjustment switches. See the 'in-flight adjustments' section of the manual for details. The changes that adjustment functions make are not saved automatically. There are 4 slots. Each switch used to concurrently make adjustments requires exclusive use of a slot."
},
"adjustmentsExamples": {
"message": "Examples"
},
"adjustmentsExample1": {
"message": "Use Slot 1 and a 3POS switch on AUX1 to select between Pitch/Roll P, I and D and another 3POS switch on AUX2 to increase or decrease the value when held up or down."
},
"adjustmentsExample2": {
"message": "Use Slot 2 and a 3POS switch on AUX4 to select enable Rate Profile Selection via the same 3POS switch on the same channel."
},
"adjustmentsColumnEnable": {
"message": "If enabled"
},
"adjustmentsColumnUsingSlot": {
"message": "using slot"
},
"adjustmentsColumnWhenChannel": {
"message": "when channel"
},
"adjustmentsColumnIsInRange": {
"message": "is in range"
},
"adjustmentsColumnThenApplyFunction": {
"message": "then apply"
},
"adjustmentsColumnViaChannel": {
"message": "via channel"
},
"adjustmentsSlot0": {
"message": "Slot 1"
},
"adjustmentsSlot1": {
"message": "Slot 2"
},
"adjustmentsSlot2": {
"message": "Slot 3"
},
"adjustmentsSlot3": {
"message": "Slot 4"
},
"adjustmentsMin": {
"message": "Min"
},
"adjustmentsMax": {
"message": "Max"
},
"adjustmentsFunction0": {
"message": "No changes"
},
"adjustmentsFunction1": {
"message": "RC Rate Adjustment"
},
"adjustmentsFunction2": {
"message": "RC Expo Adjustment"
},
"adjustmentsFunction3": {
"message": "Throttle Expo Adjustment"
},
"adjustmentsFunction4": {
"message": "Pitch & Roll Rate Adjustment"
},
"adjustmentsFunction5": {
"message": "Yaw Rate Adjustment"
},
"adjustmentsFunction6": {
"message": "Pitch & Roll P Adjustment"
},
"adjustmentsFunction7": {
"message": "Pitch & Roll I Adjustment"
},
"adjustmentsFunction8": {
"message": "Pitch & Roll D Adjustment"
},
"adjustmentsFunction9": {
"message": "Yaw P Adjustment"
},
"adjustmentsFunction10": {
"message": "Yaw I Adjustment"
},
"adjustmentsFunction11": {
"message": "Yaw D Adjustment"
},
"adjustmentsFunction12": {
"message": "Rate Profile Selection"
},
"adjustmentsSave": {
"message": "Save"
},
"adjustmentsEepromSaved": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
},
2014-05-06 21:57:57 +00:00
"servosModel": {
"message": "Model:"
},
"servosChangeDirection": {
"message": "Change Direction in TX To Match"
},
"servosGyroAccelDirection": {
"message": "Gyroscope / Accelerometer Direction"
},
"servosName": {
"message": "Name"
},
"servosMid": {
"message": "MID"
},
"servosMin": {
"message": "MIN"
},
"servosMax": {
"message": "MAX"
},
"servosDirection": {
"message": "Direction"
},
"servosLiveMode": {
"message": "Enable Live mode:"
},
"servosButtonSave": {
"message": "Save"
},
"servosModelNoSupport": {
"message": "This model doesn't support servos"
},
"servosNormal": {
"message": "Normal"
},
"servosReverse": {
"message": "Reverse"
},
"servosEepromSave": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
2014-05-08 08:56:41 +00:00
},
"gpsHead": {
"message": "GPS"
},
"gps3dFix": {
"message": "3D Fix:"
},
"gpsFixTrue": {
"message": "<span style=\"color: green\">True</span>"
},
"gpsFixFalse": {
"message": "<span style=\"color: red\">False</span>"
},
"gpsAltitude": {
"message": "Altitude:"
},
"gpsLat": {
"message": "Latitude:"
},
"gpsLon": {
"message": "Longitude:"
},
"gpsSpeed": {
"message": "Speed:"
},
"gpsSats": {
"message": "Sats:"
},
"gpsDistToHome": {
"message": "Dist to Home:"
},
"gpsSignalStrHead": {
"message": "GPS Signal Strength"
},
"gpsSignalStr": {
"message": "Signal Strength"
2014-05-08 09:02:58 +00:00
},
"motorsMaster": {
"message": "Master"
},
"motorsNotice": {
2014-08-18 17:28:06 +00:00
"message": "<strong>Motor Test Mode Notice:</strong><br />Moving the sliders will cause the motors to <strong>spin up</strong>.<br />In order to prevent injury <strong style=\"color: red\">remove ALL propellers</strong> before using this feature.<br />If you understand these instructions check the <strong>box</strong> below to <strong style=\"color: green\">enable</strong> motor test.<br /><br /><label><input type=\"checkbox\" /> Check</label>"
2014-05-08 09:09:23 +00:00
},
"sensorsInfo": {
"message": "Keep in mind that using fast update periods and rendering multiple graphs at the same time is resource heavy and will burn your battery quicker if you use a laptop.<br />We recommend to only render graphs for sensors you are interested in while using reasonable update periods."
},
"sensorsRefresh": {
"message": "Refresh:"
},
"sensorsScale": {
"message": "Scale:"
2014-05-08 09:15:35 +00:00
},
"cliInfo": {
"message": "<span style=\"color: red\">Note</span>: Leaving CLI tab or pressing Disconnect will <strong>automatically</strong> send \"<strong>exit</strong>\" to the board. With the latest firmware this will make the controller <span style=\"color: red\">restart</span> and unsaved changes will be <span style=\"color: red\">lost</span>."
2014-05-08 09:15:35 +00:00
},
"cliInputPlaceholder": {
"message": "Write your command here"
2014-05-08 10:01:07 +00:00
},
2014-05-22 14:42:34 +00:00
"loggingNote": {
"message": "Data will be logged in this tab <span style=\"color: red\">only</span>, leaving the tab will <span style=\"color: red\">cancel</span> logging and application will return to its normal <strong>\"configurator\"</strong> state.<br /> You are free to select the global update period, data will be written into the log file every <strong>1</strong> second for performance reasons."
},
"loggingSamplesSaved": {
"message": "Samples Saved:"
},
"loggingLogSize": {
"message": "Log Size:"
},
"loggingButtonLogFile": {
"message": "Select Log File"
},
"loggingStart": {
"message": "Start Logging"
},
"loggingStop": {
"message": "Stop Logging"
},
"loggingBack": {
"message": "Leave Logging / Disconnect"
},
"loggingErrorNotConnected": {
"message": "You need to <strong>connect</strong> first"
},
2014-05-22 14:42:34 +00:00
"loggingErrorLogFile": {
"message": "Please select log file"
},
"loggingErrorOneProperty": {
"message": "Please select at least one property to log"
},
"loggingAutomaticallyRetained": {
"message": "Automatically loaded previous log file: <strong>$1</strong>"
},
2014-05-22 14:42:34 +00:00
"firmwareFlasherReleaseSummaryHead": {
"message": "Release info"
},
2014-12-19 19:48:19 +00:00
"firmwareFlasherReleaseName": {
"message": "Name/Version:"
},
"firmwareFlasherReleaseVersionUrl": {
"message": "Visit release page."
},
"firmwareFlasherReleaseNotes": {
"message": "Release notes:"
},
"firmwareFlasherReleaseDate": {
"message": "Date:"
},
2015-01-08 11:38:10 +00:00
"firmwareFlasherReleaseStatus": {
"message": "State:"
},
"firmwareFlasherReleaseTarget": {
"message": "Target:"
},
"firmwareFlasherReleaseFile": {
"message": "Binary:"
},
2015-01-08 11:38:10 +00:00
"firmwareFlasherReleaseStatusReleaseCandidate": {
"message": "<span style=\"color: red\">IMPORTANT: This firmware release is currently marked as a release candidate. Please report any issues immediately.</span>"
},
"firmwareFlasherReleaseFileUrl": {
"message": "Download manually."
},
"firmwareFlasherTargetWarning": {
"message": "<span style=\"color: red\">IMPORTANT</span>: Ensure you flash a file appropriate for your target. Flashing a binary for the wrong target can cause <span style=\"color: red\">bad</span> things to happen."
},
2014-05-08 10:01:07 +00:00
"firmwareFlasherPath": {
"message": "Path:"
},
"firmwareFlasherSize": {
"message": "Size:"
},
"firmwareFlasherStatus": {
"message": "Status:"
},
"firmwareFlasherProgress": {
"message": "Progress:"
},
"firmwareFlasherLoadFirmwareFile": {
"message": "Please load firmware file"
2014-05-08 10:01:07 +00:00
},
"firmwareFlasherNoReboot": {
"message": "No reboot sequence"
},
"firmwareFlasherOnlineReleasesDescription": {
2014-12-26 18:20:45 +00:00
"message": "Available online firmware releases - Select the correct firmware appropriate for your board."
},
"firmwareFlasherNoRebootDescription": {
2014-12-26 18:20:45 +00:00
"message": "Enable if you are flashing board with bootloader pins shorted"
},
2014-05-08 10:01:07 +00:00
"firmwareFlasherFlashOnConnect": {
"message": "Flash on connect"
},
"firmwareFlasherFlashOnConnectDescription": {
"message": "Attempt to flash the board automatically (triggered by newly detected serial port)"
},
2014-05-08 10:01:07 +00:00
"firmwareFlasherFullChipErase": {
"message": "Full Chip Erase"
},
"firmwareFlasherFullChipEraseDescription": {
"message": "Wipes all configuration data currently stored on the board"
},
"firmwareFlasherFlashDevelopmentFirmware": {
"message": "Use Development Firmware"
},
"firmwareFlasherFlashDevelopmentFirmwareDescription": {
"message": "Flash most recent (untested) development firmware"
},
"firmwareFlasherFlashSlowly": {
"message": "Flash slowly"
},
"firmwareFlasherFlashSlowlyDescription": {
"message": "Use 115200 baudrate for flashing (useful for flashing via bluetooth)"
},
"firmwareFlasherOptionLabelSelectFirmware": {
"message": "Choose a Firmware / Board"
},
2014-05-08 10:01:07 +00:00
"firmwareFlasherButtonLoadLocal": {
"message": "Load Firmware [Local]"
},
"firmwareFlasherButtonLoadOnline": {
"message": "Load Firmware [Online]"
},
"firmwareFlasherFlashFirmware": {
"message": "Flash Firmware"
},
"firmwareFlasherGithubInfoHead": {
"message": "Github Firmware Info"
},
"firmwareFlasherCommiter": {
"message": "Committer:"
},
"firmwareFlasherDate": {
"message": "Date:"
},
"firmwareFlasherHash": {
"message": "Hash:"
},
"firmwareFlasherUrl": {
"message": "Go to GitHub to review this commit..."
},
2014-05-08 10:01:07 +00:00
"firmwareFlasherMessage": {
"message": "Message:"
},
"firmwareFlasherWarninghead": {
"message": "Warning"
},
"firmwareFlasherWarningText": {
"message": "Please do not try to flash <strong>non-cleanflight</strong> hardware with this firmware flasher (it wont work).<br />Do not <strong>disconnect</strong> the board or <strong>turn off</strong> your computer while flashing.<br /><br />Note: <strong>STM32</strong> bootloader is stored in <strong>ROM</strong>, it cannot be bricked.<br />Note: <strong>Auto-Connect</strong> is always disabled while you are inside firmware flasher.<br />Note: This can wipe your configuration including but not limited to PIDs, Auxiliary, and FEATURES. Make sure you have a backup.<br />"
2014-05-08 10:01:07 +00:00
},
"firmwareFlasherButtonLeave": {
"message": "Leave Firmware Flasher"
},
"firmwareFlasherFirmwareNotLoaded": {
2014-08-30 08:30:28 +00:00
"message": "Firmware not loaded"
2014-05-08 10:01:07 +00:00
},
"firmwareFlasherHexCorrupted": {
2014-08-30 08:30:28 +00:00
"message": "HEX file appears to be corrupted"
2014-05-08 10:01:07 +00:00
},
"firmwareFlasherRemoteFirmwareLoaded": {
"message": "<span style=\"color: green\">Remote Firmware loaded, ready for flashing</span>"
},
"firmwareFlasherFailedToLoadOnlineFirmware": {
2014-08-30 08:30:28 +00:00
"message": "Failed to load remote firmware"
2014-05-08 10:01:07 +00:00
},
"ledStripHelp": {
"message": "The flight controller can control colors and effects of individual LEDs on a strip.<br />Configure LEDs on the grid, configure wiring order then attach LEDs on your aircraft according to grid positions."
},
"ledStripButtonSave": {
"message": "Save"
},
"ledStripEepromSaved": {
"message": "EEPROM <span style=\"color: green\">saved</span>"
}
}