betaflight-configurator/_locales/en/messages.json

{
    "translation_version": {
        "message": "0"
    },

    "options_title": {
        "message": "Application Options"
    },
    "options_receive_app_notifications": {
        "message": "Receive desktop <strong>notification</strong> when application updates"
    },
    "options_improve_configurator": {
        "message": "Send anonymous usage data to the developer team"
    },

    "connect": {
        "message": "Connect"
    },
    "connecting": {
        "message": "Connecting"
    },
    "disconnect": {
        "message": "Disconnect"
    },
    "autoConnect": {
        "message": "Auto-Connect"
    },
    "autoConnectEnabled": {
        "message": "Auto-Connect: Enabled - Configurator automatically tries to connect when new port is detected"
    },
    "autoConnectDisabled": {
        "message": "Auto-Connect: Disabled - User needs to select the correct serial port and click \"Connect\" button on its own"
    },
    "deviceRebooting": {
        "message": "Device - <span style=\"color: red\">Rebooting</span>"
    },
    "deviceReady": {
        "message": "Device - <span style=\"color: green\">Ready</span>"
    },


    "tabSetup": {
        "message": "Setup"
    },
    "tabConfiguration": {
        "message": "Configuration"
    },
    "tabPidTuning": {
        "message": "PID Tuning"
    },
    "tabReceiver": {
        "message": "Receiver"
    },
    "tabModeSelection": {
        "message": "Mode Selection"
    },
    "tabServos": {
        "message": "Servos"
    },
    "tabGPS": {
        "message": "GPS"
    },
    "tabMotorTesting": {
        "message": "Motor Testing"
    },
    "tabRawSensorData": {
        "message": "Raw Sensor Data"
    },
    "tabCLI": {
        "message": "CLI"
    },
    "tabLogging": {
        "message": "Logging"
    },

    "serialPortOpened": {
        "message": "Serial port <span style=\"color: green\">successfully</span> opened with ID: $1"
    },
    "serialPortOpenFail": {
        "message": "<span style=\"color: red\">Failed</span> to open serial port"
    },
    "serialPortClosedOk": {
        "message": "Serial port <span style=\"color: green\">successfully</span> closed"
    },
    "serialPortClosedFail": {
        "message": "<span style=\"color: red\">Failed</span> to close serial port"
    },

    "noConfigurationReceived": {
        "message": "No configuration received within <span style=\"color: red\">10 seconds</span>, communication <span style=\"color: red\">failed</span>"
    },
    "firmwareVersionNotSupported": {
        "message": "This firmware version is <span style=\"color: red\">not supported</span>. Please upgrade to version <strong>$1</strong> or higher"
    },
    "firmwareVersion": {
        "message": "Firmware Version: <strong>$1</strong>"
    },
    "uniqueDeviceIdReceived": {
        "message": "Unique device ID <span style=\"color: green\">received</span> - <strong>0x$1</strong>"
    },

    "notifications_app_just_updated_to_version": {
        "message": "Application just updated to version: $1"
    },
    "notifications_click_here_to_start_app": {
        "message": "Click here to start the application"
    },

    "statusbar_port_utilization": {
        "message": "Port utilization:"
    },
    "statusbar_usage_download": {
        "message": "D: $1%"
    },
    "statusbar_usage_upload": {
        "message": "U: $1%"
    },
    "statusbar_packet_error": {
        "message": "Packet error:"
    },
    "statusbar_i2c_error": {
        "message": "I2C error:"
    },
    "statusbar_cycle_time": {
        "message": "Cycle Time:"
    },

    "please_grant_usb_permissions": {
        "message": "Please click on <strong>\"Request Optional Permissions\"</strong> button to grant application <strong style=\"color: red\">required</strong> <strong>USB</strong> access"
    },
    "usb_permissions_granted": {
        "message": "Optional <strong>USB</strong> permissions <strong style=\"color: green\">granted</strong>"
    },

    "eeprom_saved_ok": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "default_optional_permissions_head": {
        "message": "Optional USB Permissions"
    },
    "default_optional_permissions_text": {
        "message": "Due to addition of <strong>Naze32PRO</strong> to the supported hardware family, Configurator <strong style=\"color: red\">requires</strong> USB access to allow firmware flashing via DFU"
    },
    "default_request_optional_permissions": {
        "message": "Request Optional Permissions"
    },
    "defaultWelcomeText": {
        "message": "Welcome to <strong>Baseflight - Configurator</strong>, utility designed to simplify updating, configuring and tuning of your flight controller.<br />Application supports complete family of Baseflight hardware (acro naze, naze32, naze32pro and afromini).<br /><br />&bull; Latest <strong>CP210x Drivers</strong> can be downloaded from <a href=\"http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx\" title=\"http://www.silabs.com/\" target=\"_blank\">here</a><br />"
    },
    "defaultChangelogHead": {
        "message": "Configurator - Changelog"
    },
    "defaultButtonFirmwareFlasher": {
        "message": "Firmware Flasher"
    },
    "defaultDonateHead": {
        "message": "Open Source / Donation Notice"
    },
    "defaultDonateText": {
        "message": "This utility is fully <strong>open source</strong> and is available free of charge to all <strong>baseflight</strong> users.<br />If you found the utility useful, please consider <strong>supporting</strong> its development by donating."
    },

    "initialSetupButtonCalibrateAccel": {
        "message": "Calibrate Accelerometer"
    },
    "initialSetupCalibrateAccelText": {
        "message": "Place board or frame on <strong style=\"color: green\">leveled</strong> surface, proceed with calibration, ensure platform is <strong style=\"color: red\">not</strong> moving during calibration period."
    },
    "initialSetupButtonCalibrateMag": {
        "message": "Calibrate Magnetometer"
    },
    "initialSetupCalibrateMagText": {
        "message": "Move multirotor atleast <strong>360</strong> degrees on all axis of rotation. You have <strong style=\"color: red\">30 seconds</strong> to perform this task."
    },
    "initialSetupButtonReset": {
        "message": "Reset Settings"
    },
    "initialSetupResetText": {
        "message": "Restore <span style=\"color: red\">all</span> settings to <strong>default</strong>."
    },
    "initialSetupButtonBackup": {
        "message": "Backup"
    },
    "initialSetupButtonRestore": {
        "message": "Restore"
    },
    "initialSetupBackupRestoreText": {
        "message": "<strong>Backup</strong> your configuration in case of an accident. (<strong>CLI</strong> settings are <strong style=\"color: red\">not</strong> included)."
    },
    "initialSetupButtonResetZaxis": {
        "message": "Reset Z axis, offset: 0 deg"
    },
    "initialSetupButtonResetZaxisValue": {
        "message": "Reset Z axis, offset: $1 deg"
    },
    "initialSetupMixerHead": {
        "message": "Mixer Type"
    },
    "initialSetupThrottleHead": {
        "message": "Throttle Settings"
    },
    "initialSetupMinimum": {
        "message": "Minimum:"
    },
    "initialSetupMaximum": {
        "message": "Maximum:"
    },
    "initialSetupFailsafe": {
        "message": "Failsafe:"
    },
    "initialSetupMinCommand": {
        "message": "MinCommand:"
    },
    "initialSetupBatteryHead": {
        "message": "Battery"
    },
    "initialSetupMinCellV": {
        "message": "Min Cell Voltage:"
    },
    "initialSetupMaxCellV": {
        "message": "Max Cell Voltage:"
    },
    "initialSetupVoltageScale": {
        "message": "Voltage Scale:"
    },
    "initialSetupAccelTrimsHead": {
        "message": "Accelerometer trims"
    },
    "initialSetupPitch": {
        "message": "Pitch:"
    },
    "initialSetupRoll": {
        "message": "Roll:"
    },
    "initialSetupMagHead": {
        "message": "Magnetometer"
    },
    "initialSetupDeclination": {
        "message": "Declination:"
    },
    "initialSetupInfoHead": {
        "message": "Info"
    },
    "initialSetupBattery": {
        "message": "Battery voltage:"
    },
    "initialSetupBatteryValue": {
        "message": "$1 V"
    },
    "initialSetupDrawn": {
        "message": "Capacity drawn:"
    },
    "initialSetupDrawing": {
        "message": "Current draw:"
    },
    "initialSetupBatteryMahValue": {
        "message": "$1 mAh"
    },
    "initialSetupBatteryAValue": {
        "message": "$1 A"
    },
    "initialSetupRSSI": {
        "message": "RSSI:"
    },
    "initialSetupRSSIValue": {
        "message": "$1 %"
    },
    "initialSetupButtonSave": {
        "message": "Save"
    },
    "initialSetupModel": {
        "message": "Model: $1"
    },
    "initialSetupHeading": {
        "message": "Heading: $1 deg"
    },
    "initialSetupAccelCalibStarted": {
        "message": "Accelerometer calibration started"
    },
    "initialSetupAccelCalibEnded": {
        "message": "Accelerometer calibration finished"
    },
    "initialSetupMagCalibStarted": {
        "message": "Magnetometer calibration started"
    },
    "initialSetupMagCalibEnded": {
        "message": "Magnetometer calibration finished"
    },
    "initialSetupSettingsRestored": {
        "message": "Settings restored to <strong>default</strong>"
    },
    "initialSetupEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "configurationMixer": {
        "message": "Mixer"
    },
    "configurationFeatures": {
        "message": "Features"
    },
    "configurationBoardAlignment": {
        "message": "Board Alignment"
    },
    "configurationBoardAlignmentRoll": {
        "message": "Roll Adjustment [deg]"
    },
    "configurationBoardAlignmentPitch": {
        "message": "Pitch Adjustment [deg]"
    },
    "configurationBoardAlignmentYaw": {
        "message": "Yaw Adjustment [deg]"
    },
    "configurationAccelTrimMagDec": {
        "message": "Accelerometer & Magnetometer"
    },
    "configurationAccelTrimRoll": {
        "message": "Accelerometer Roll Trim"
    },
    "configurationAccelTrimPitch": {
        "message": "Accelerometer Pitch Trim"
    },
    "configurationMagDeclination": {
        "message": "Magnetometer Declination [deg]"
    },
    "configurationThrottle": {
        "message": "Throttle"
    },
    "configurationThrottleMinimum": {
        "message": "Minimum Throttle"
    },
    "configurationThrottleMid": {
        "message": "Middle Throttle [RC inputs center value]"
    },
    "configurationThrottleMaximum": {
        "message": "Maximum Throttle"
    },
    "configurationThrottleFailsafe": {
        "message": "Failsafe Throttle"
    },
    "configurationThrottleMinimumCommand": {
        "message": "Minimum Command"
    },
    "configurationBatteryCurrent": {
        "message": "Battery & Current"
    },
    "configurationBatteryMinimum": {
        "message": "Minimum Cell Voltage"
    },
    "configurationBatteryMaximum": {
        "message": "Maximum Cell Voltage"
    },
    "configurationBatteryScale": {
        "message": "Voltage Scale"
    },
    "configurationBatteryMultiwiiCurrent": {
        "message": "Enable support for legacy Multiwii MSP current output"
    },
    "configurationGPS": {
        "message": "GPS"
    },
    "configurationGPStype": {
        "message": "Type"
    },
    "configurationGPSbaudrate": {
        "message": "Baudrate"
    },
    "configurationGPSubxSbas": {
        "message": "Ground Assistance Type"
    },
    "configurationSerialRX": {
        "message": "Serial Receiver"
    },
    "configurationEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },
    "configurationButtonSave": {
        "message": "Save"
    },

    "pidTuningName": {
        "message": "Name"
    },
    "pidTuningProportional": {
        "message": "Proportional"
    },
    "pidTuningIntegral": {
        "message": "Integral"
    },
    "pidTuningDerivative": {
        "message": "Derivative"
    },
    "pidTuningRollPitchRate": {
        "message": "ROLL &amp; PITCH rate"
    },
    "pidTuningYawRate": {
        "message": "YAW rate"
    },
    "pidTuningTPA": {
        "message": "TPA"
    },
    "pidTuningButtonSave": {
        "message": "Save"
    },
    "pidTuningButtonRefresh": {
        "message": "Refresh"
    },
    "pidTuningProfileHead": {
        "message": "Profile"
    },
    "pidTuningLoadedProfile": {
        "message": "Loaded Profile: <strong>$1</strong>"
    },
    "pidTuningDataRefreshed": {
        "message": "PID data <strong>refreshed</strong>"
    },
    "pidTuningEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "receiverThrottleMid": {
        "message": "Throttle MID"
    },
    "receiverThrottleExpo": {
        "message": "Throttle EXPO"
    },
    "receiverRcRate": {
        "message": "RC Rate"
    },
    "receiverRcExpo": {
        "message": "RC Expo"
    },
    "receiverRefreshRateTitle": {
        "message": "Graph refresh rate"
    },
    "receiverButtonSave": {
        "message": "Save"
    },
    "receiverButtonRefresh": {
        "message": "Refresh"
    },
    "receiverDataRefreshed": {
        "message": "RC Tuning data <strong>refreshed</strong>"
    },
    "receiverEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "auxiliaryName": {
        "message": "Name"
    },
    "auxiliaryLow": {
        "message": "LOW"
    },
    "auxiliaryMed": {
        "message": "MED"
    },
    "auxiliaryHigh": {
        "message": "HIGH"
    },
    "auxiliaryButtonSave": {
        "message": "Save"
    },
    "auxiliaryEepromSaved": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "servosModel": {
        "message": "Model:"
    },
    "servosChangeDirection": {
        "message": "Change Direction in TX To Match"
    },
    "servosGyroAccelDirection": {
        "message": "Gyroscope / Accelerometer Direction"
    },
    "servosName": {
        "message": "Name"
    },
    "servosMid": {
        "message": "MID"
    },
    "servosMin": {
        "message": "MIN"
    },
    "servosMax": {
        "message": "MAX"
    },
    "servosDirection": {
        "message": "Direction"
    },
    "servosLiveMode": {
        "message": "Enable Live mode:"
    },
    "servosButtonSave": {
        "message": "Save"
    },
    "servosModelNoSupport": {
        "message": "This model doesn't support servos"
    },
    "servosNormal": {
        "message": "Normal"
    },
    "servosReverse": {
        "message": "Reverse"
    },
    "servosEepromSave": {
        "message": "EEPROM <span style=\"color: green\">saved</span>"
    },

    "gpsHead": {
        "message": "GPS"
    },
    "gps3dFix": {
        "message": "3D Fix:"
    },
    "gpsFixTrue": {
        "message": "<span style=\"color: green\">True</span>"
    },
    "gpsFixFalse": {
        "message": "<span style=\"color: red\">False</span>"
    },
    "gpsAltitude": {
        "message": "Altitude:"
    },
    "gpsLat": {
        "message": "Latitude:"
    },
    "gpsLon": {
        "message": "Longitude:"
    },
    "gpsSpeed": {
        "message": "Speed:"
    },
    "gpsSats": {
        "message": "Sats:"
    },
    "gpsDistToHome": {
        "message": "Dist to Home:"
    },
    "gpsSignalStrHead": {
        "message": "GPS Signal Strength"
    },
    "gpsSignalStr": {
        "message": "Signal Strength"
    },

    "motorsMaster": {
        "message": "Master"
    },
    "motorsNotice": {
        "message": "<strong>Motor Test Mode Notice:</strong><br />Moving the sliders will cause the motors to <strong>spin up</strong>.<br />In order to prevent injury <strong style=\"color: red\">remove ALL propellers</strong> before using this feature.<br />If you understand these instructions check the <strong>box</strong> below to <strong style=\"color: green\">enable</strong> motor test.<br /><br /><label><input type=\"checkbox\" /> Check</label>"
    },

    "sensorsInfo": {
        "message": "Keep in mind that using fast update periods and rendering multiple graphs at the same time is resource heavy and will burn your battery quicker if you use a laptop.<br />We recommend to only render graphs for sensors you are interested in while using reasonable update periods."
    },
    "sensorsRefresh": {
        "message": "Refresh:"
    },
    "sensorsScale": {
        "message": "Scale:"
    },

    "cliInfo": {
        "message": "<span style=\"color: red\">Note</span>: Leaving CLI tab or pressing Disconnect will <strong>automatically</strong> send \"<strong>exit</strong>\" to the board, which will make the controller save all the changes and <span style=\"color: red\">restart</span>."
    },
    "cliInputPlaceholder": {
        "message": "Write your command here"
    },

    "loggingNote": {
        "message": "Data will be logged in this tab <span style=\"color: red\">only</span>, leaving the tab will <span style=\"color: red\">cancel</span> logging and application will return to its normal <strong>\"configurator\"</strong> state.<br /> You are free to select the global update period, data will be written into the log file every <strong>1</strong> second for performance reasons."
    },
    "loggingSamplesSaved": {
        "message": "Samples Saved:"
    },
    "loggingLogSize": {
        "message": "Log Size:"
    },
    "loggingButtonLogFile": {
        "message": "Select Log File"
    },
    "loggingStart": {
        "message": "Start Logging"
    },
    "loggingStop": {
        "message": "Stop Logging"
    },
    "loggingBack": {
        "message": "Leave Logging / Disconnect"
    },
    "loggingErrorNotConnected": {
        "message": "You need to <strong>connect</strong> first"
    },
    "loggingErrorLogFile": {
        "message": "Please select log file"
    },
    "loggingErrorOneProperty": {
        "message": "Please select at least one property to log"
    },
    "loggingAutomaticallyRetained": {
        "message": "Automatically loaded previous log file: <strong>$1</strong>"
    },

    "firmwareFlasherPath": {
        "message": "Path:"
    },
    "firmwareFlasherSize": {
        "message": "Size:"
    },
    "firmwareFlasherStatus": {
        "message": "Status:"
    },
    "firmwareFlasherProgress": {
        "message": "Progress:"
    },
    "firmwareFlasherNote": {
        "message": "If you are flashing board with bootloader pins <strong>shorted/connected</strong>, check <strong>No reboot sequence</strong>.<br />If you want configuration data to be wiped, check <strong>Full Chip Erase</strong><br />If you are flashing via bluetooth adapter or using external usb to serial adapter, check <strong>Flash slowly</strong><br />"
    },
    "firmwareFlasherNoReboot": {
        "message": "No reboot sequence"
    },
    "firmwareFlasherFlashOnConnect": {
        "message": "Flash on connect"
    },
    "firmwareFlasherFullChipErase": {
        "message": "Full Chip Erase"
    },
    "firmwareFlasherFlashSlowly": {
        "message": "Flash slowly"
    },
    "firmwareFlasherFlashSlowlyTitle": {
        "message": "Use 115200 baudrate for flashing"
    },
    "firmwareFlasherButtonLoadLocal": {
        "message": "Load Firmware [Local]"
    },
    "firmwareFlasherButtonLoadOnline": {
        "message": "Load Firmware [Online]"
    },
    "firmwareFlasherFlashFirmware": {
        "message": "Flash Firmware"
    },
    "firmwareFlasherGithubInfoHead": {
        "message": "Github Firmware Info"
    },
    "firmwareFlasherCommiter": {
        "message": "Committer:"
    },
    "firmwareFlasherDate": {
        "message": "Date:"
    },
    "firmwareFlasherMessage": {
        "message": "Message:"
    },
    "firmwareFlasherWarninghead": {
        "message": "Warning"
    },
    "firmwareFlasherWarningText": {
        "message": "Please do not try to flash <strong>non-baseflight</strong> hardware with this firmware flasher (it wont work).<br />Do not <strong>disconnect</strong> the board or <strong>turn off</strong> your computer while flashing.<br /><br />Note: <strong>STM32</strong> bootloader is stored in <strong>ROM</strong>, it cannot be bricked.<br />Note: <strong>Auto-Connect</strong> is always disabled while you are inside firmware flasher.<br />"
    },
    "firmwareFlasherButtonLeave": {
        "message": "Leave Firmware Flasher"
    },
    "firmwareFlasherFirmwareNotLoaded": {
        "message": "Firmware not loaded"
    },
    "firmwareFlasherHexCorrupted": {
        "message": "HEX file appears to be corrupted"
    },
    "firmwareFlasherRemoteFirmwareLoaded": {
        "message": "<span style=\"color: green\">Remote Firmware loaded, ready for flashing</span>"
    },
    "firmwareFlasherFailedToLoadOnlineFirmware": {
        "message": "Failed to load remote firmware"
    },
    "firmwareFlasherWaitForFinish": {
        "message": "You <span style=\"color: red\">can't</span> do this right now, please wait for current operation to finish ..."
    }
}