wifipineapple-openwrt/target/linux/generic/patches-2.6.37/630-phy_packets.patch

64 lines
1.9 KiB
Diff

--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -149,6 +149,18 @@ int phy_scan_fixups(struct phy_device *p
}
EXPORT_SYMBOL(phy_scan_fixups);
+static int generic_receive_skb(struct sk_buff *skb)
+{
+ skb->protocol = eth_type_trans(skb, skb->dev);
+ return netif_receive_skb(skb);
+}
+
+static int generic_rx(struct sk_buff *skb)
+{
+ skb->protocol = eth_type_trans(skb, skb->dev);
+ return netif_rx(skb);
+}
+
static struct phy_device* phy_device_create(struct mii_bus *bus,
int addr, int phy_id)
{
@@ -180,6 +192,8 @@ static struct phy_device* phy_device_cre
dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
dev->state = PHY_DOWN;
+ dev->netif_receive_skb = &generic_receive_skb;
+ dev->netif_rx = &generic_rx;
mutex_init(&dev->lock);
INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -332,6 +332,20 @@ struct phy_device {
void (*adjust_link)(struct net_device *dev);
void (*adjust_state)(struct net_device *dev);
+
+ /*
+ * By default these point to the original functions
+ * with the same name. adding them to the phy_device
+ * allows the phy driver to override them for packet
+ * mangling if the ethernet driver supports it
+ * This is required to support some really horrible
+ * switches such as the Marvell 88E6060
+ */
+ int (*netif_receive_skb)(struct sk_buff *skb);
+ int (*netif_rx)(struct sk_buff *skb);
+
+ /* alignment offset for packets */
+ int pkt_align;
};
#define to_phy_device(d) container_of(d, struct phy_device, dev)
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -957,6 +957,7 @@ struct net_device {
void *ax25_ptr; /* AX.25 specific data */
struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data,
assign before registering */
+ void *phy_ptr; /* PHY device specific data */
/*
* Cache lines mostly used on receive path (including eth_type_trans())