wifipineapple-openwrt/target/linux/generic
Gabor Juhos 8120006c05 generic: add rtl8366rb switch vlan fid support
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:21 +00:00
..
base-files rename target/linux/generic-2.6 to generic 2010-06-26 20:42:58 +00:00
files generic: add rtl8366rb switch vlan fid support 2010-11-24 10:01:21 +00:00
image rename target/linux/generic-2.6 to generic 2010-06-26 20:42:58 +00:00
patches-2.6.30 [kernel] ssb: give the PCI core more time to initialize, fixes PCI issues with Atheros cards on the Asus WL-500w and possibly others (#4710) 2010-08-13 00:18:16 +00:00
patches-2.6.31 kernel: backport ppoll to 2.6.31 to fix udev build 2010-08-19 12:49:33 +00:00
patches-2.6.32 add 2.6.32 patches to use ext4 for ext2/3 2010-11-22 12:03:23 +00:00
patches-2.6.33 generic: add support for the EON EN25F32 flash chip 2010-09-14 12:03:01 +00:00
patches-2.6.34 target/linux: Add support for cores with slow WDT clock like bcm5354. (thank you Aleksandar Radovanovic) 2010-10-12 15:59:35 +00:00
patches-2.6.35 linux/generic: add imq patches for linux kernels 2.6.35,36,37. (closes #8211) 2010-11-12 09:28:00 +00:00
patches-2.6.36 linux/generic: switch to userspace __aligned_u64 calls. 2010-11-16 08:00:07 +00:00
patches-2.6.37 linux/generic: add 2.6.37 support for the Cisco 7941/7945 IP phones: http://lkml.org/lkml/2010/11/21/219 (thank you Kevin Cernekee) 2010-11-23 14:36:15 +00:00
config-2.6.30 refresh generic kernel configs using kconfig.pl 2010-10-21 18:42:37 +00:00
config-2.6.31 refresh generic kernel configs using kconfig.pl 2010-10-21 18:42:37 +00:00
config-2.6.32 use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00
config-2.6.33 use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00
config-2.6.34 use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00
config-2.6.35 use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00
config-2.6.36 use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00
config-2.6.37 use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00