This commit fixes build breakage in package/kernel leading to missing
subsequent kmods like kmod-usb-serial, this should fix the missing
packages in ar71xx builds.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31477 3c298f89-4303-0410-b956-a3cf2f4a3e73
Any modifications in target/linux/*/modules.mk would not come into effect for
subsequent "make menuconfig" unless we delete ./tmp.
Signed-off-by: kalyan <kalyanatejaswi@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31442 3c298f89-4303-0410-b956-a3cf2f4a3e73
It has been added at the end of other.mk as i couldn't find a better place
for it.
Signed-off-by: Christian Gagneraud <chris@techworks.ie>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30989 3c298f89-4303-0410-b956-a3cf2f4a3e73
This kmod has been certainly added by copy/paste but the title and
description were not updated. Fix that.
The DS2433 is a 1 wire 4kb eeprom with CRC capability.
Signed-off-by: Christian Gagneraud <chris@techworks.ie>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30988 3c298f89-4303-0410-b956-a3cf2f4a3e73
The DS2431 is a 1 wire 1kb eeprom.
Signed-off-by: Christian Gagneraud <chris@techworks.ie>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30987 3c298f89-4303-0410-b956-a3cf2f4a3e73
brcmsmac does not work on bcm47xx based devices or has AP mode support for now.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30643 3c298f89-4303-0410-b956-a3cf2f4a3e73
Currently the btrfs module (and other fs modules) is loaded before other modules to provide early extroot compatibility. This will fail for btrfs however, because the dependencies crypto-core and crypto-hash are missing. This patch makes them available for early loading too.
Signed-off-by: Jan Willies <jan@willies.info>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30542 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for a kernel module package for SLIP. We needed it forusing tunslip6 from Contiki OS for 6LoWPAN communications.
Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30538 3c298f89-4303-0410-b956-a3cf2f4a3e73
These are now supported by platform drivers in arch/x86/platform/geode.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30020 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73
The aim of this change is to invalidate kmods which are built against a different kernel config on the opkg metadata level. Manual copying and insmod of custom
*.ko files, e.g. for development purpose, is still possible.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29686 3c298f89-4303-0410-b956-a3cf2f4a3e73
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
This allows to enable rtl8366 switches family support, which are
optional (present on few boards).
Based on a patch by Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29388 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is a patch that adds kernel drivers for TI's USB 3410/5052
devices to the `make menuconfig` GUI during setup.
Signed-off-by: Nemanja Stefanovic <nemik@nemik.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29366 3c298f89-4303-0410-b956-a3cf2f4a3e73
Useful for kirkwood and probably other Marvell SoCs.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29364 3c298f89-4303-0410-b956-a3cf2f4a3e73
* move AddDepends/nls to 001-depends.mk for proper use by other packages (closes: #7639)
* make kmod-usb-core use it
* fix deps generated from its arguments (as used in kmod-fs-hfsplus)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28668 3c298f89-4303-0410-b956-a3cf2f4a3e73
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28356 3c298f89-4303-0410-b956-a3cf2f4a3e73
this module was missing from [28334]
buildbots timed out as the symbol was not defined
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28352 3c298f89-4303-0410-b956-a3cf2f4a3e73
This allows building the module for the national lm95241 i2c temperature sensor.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28335 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch should bring support for several kernel modules related to
I2C to openwrt, which are existing for several years now. Namely there
is the i2c-tiny-usb bus driver, to hook up an I2C bus on any device with
usb support (prevent voiding warranty when opening and soldering).
Second, there is support for the i2c-mux driver and pca954x as a I2C
switch driver.
Finally there is support for common I2C gpio expander driver modules
pca953x and pcf857x. They work without providing platform data recently
(can be instantiated at runtime).
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28334 3c298f89-4303-0410-b956-a3cf2f4a3e73
Not all x86 profiles have CONFIG_INPUT=y in their configuration. Just remove kmod-input-core for them.
Thank you Philip Prindeville for pointing out this problem.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27988 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since the SetDepends macro does a:
DEPENDS:= ...
it can't be used after setting DEPENDS:= explicitly, or it will clobber the previous value.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27983 3c298f89-4303-0410-b956-a3cf2f4a3e73
The module definitions depend on 001-depends.mk being the first included,
but make 3.82 does not sort the results of wildcards anymore, so do an
explicit sort of the includes.
Found by Philip Prindeville, thanks!
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27982 3c298f89-4303-0410-b956-a3cf2f4a3e73
Instead of depending on new kernel versions, depend on not having one
of the older ones (or vice versa for modules removed in current kernels).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27934 3c298f89-4303-0410-b956-a3cf2f4a3e73
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27874 3c298f89-4303-0410-b956-a3cf2f4a3e73
mbcache is only needed if xattr support is enabled, but this is only true
for ext4 on 2.6.37+, so just bundle it with ext4 when needed.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27849 3c298f89-4303-0410-b956-a3cf2f4a3e73
Fixes problem with TFM allocation in cryptosoft.c
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Hauke:
* remove ubsec_ssb package and take it from ocf-linux
* use patches from ocf-linux package
* refresh all patches
* readd some build fixes for OpenWrt.
* readd CRYPTO_MANAGER dependency
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27753 3c298f89-4303-0410-b956-a3cf2f4a3e73
* SiS 190 Fast/Gigabit Ethernet support
* SysKonnect Yukon support
* Atheros L2 Fast Ethernet support
* Atheros L1 Gigabit Ethernet support
* Atheros L1C
* Atheros L1E
Patch by Lauri Võsandi<lauri.vosandi@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27242 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also disable rtc-core for now since this changed to a bool, now directly
used in the kernel if enabled.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27186 3c298f89-4303-0410-b956-a3cf2f4a3e73
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27037 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add missing config symbols
* Update package/kernel for 2.6.39
CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.
Thank you Jonas Gorski for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27010 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add a missing dependency to kmod-crypto-iv. chainiv.ko and eseqiv.ko
from kmod-crypto-iv depend on crypto_blkcipher.ko from
kmod-crypto-manager.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26984 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since the oldest kernel in trunk is 2.6.30 the modules always use the
newer names, so we can just use the _generic prefix directly.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26903 3c298f89-4303-0410-b956-a3cf2f4a3e73
There's only 2.6, so it doesn't make sense to mention modules that are
2.4 only or for modules that they are available only for 2.6.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26902 3c298f89-4303-0410-b956-a3cf2f4a3e73
With no 2.4 support in trunk, we can safely remove any 2.4 definitions for
kmods and merge the 2.6 definitions into the generic ones.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26901 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since there's only 2.6 in trunk $(KMOD_SUFFIX) can be safely replaced with
ko for all mainline kernel modules.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26900 3c298f89-4303-0410-b956-a3cf2f4a3e73
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26868 3c298f89-4303-0410-b956-a3cf2f4a3e73
kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto
modules that are useful for IPSEC. This is an alternative to breaking
these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng
(rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26814 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the
extraneous kmod-crypto-core dependency to eliminate recursion.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26813 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv
packages. These packages provide some missing kernel crypto modules
which are required for IPSEC. The strongswan4, ipsec-tools, and possibly
other IPSEC packages do not work properly without these modules.
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26812 3c298f89-4303-0410-b956-a3cf2f4a3e73
For kernel versions newer then 2.6.31 the ext4 module can be used to mount
ext2/3 filesystems.
Building ext2/3 as modules on the other hand breaks using ext4 for mounting ext2
or ext3, which breaks booting from ext2/3 on machines where the ext4 module is
built into the kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26645 3c298f89-4303-0410-b956-a3cf2f4a3e73
btrfs needs zlib_deflate, which was built but not included
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26632 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Some module should be loaded later to load them after the modules they are depending on
* add some more missing config symbols
* make CS5535 build again
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26570 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add a bundle for including commonly useful modules for IPtables debugging and development.
For now, it just contains xt_TRACE.ko
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26567 3c298f89-4303-0410-b956-a3cf2f4a3e73
This enables support for Realtek 8169 based network cards for other
platforms than x86. I have a mini-PCI card on ixp4xxx running here.
Maybe for the other cards in netdevices.mk a @DEPENDS change from
@TARGET_x86 to @PCI_SUPPORT makes also sense.
Signed-off-by: Christoph König <christoph.koenig@ikt.uni-hannover.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26529 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since r26296 mppe.ko could not be loaded, kernel gives "device missing" error.
According to KConfig cypther-ecb is required.
Signed-off-by: Sven Roederer <mailinglists.sven_at_roederer.dhs.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26507 3c298f89-4303-0410-b956-a3cf2f4a3e73
Changed:
- Support added for mISDN card driver for Cologne AG's HFC pci cards (single port)
- Title texts and help texts for some other isdn drivers adjusted for clarification
Signed-off by: Arnold Schulz <arnysch@gmx.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26452 3c298f89-4303-0410-b956-a3cf2f4a3e73
Netfilter LED target triggers blinkenlichten when a network packet hits
a rule.
LED target requires iptables 1.4.9 or higher
Signed-off-by: Łukasz Stelmach <stlman@poczta.fm>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26451 3c298f89-4303-0410-b956-a3cf2f4a3e73
Jo-Philipp Wich
Jonas Gorski
John Crispin
Travis Kemen
Gabor Juhos
Hauke Mehrtens
Florian Fainelli
Michael Büsch
Nicolas Thill
Daniel Dickinson
Felix Fietkau
Vasilis Tsiligiannis
Imre Kaloz
Rod Whitby
Lars-Peter Clausen