f004690f1a
[mcs814x] more convertions to {read,write}_relaxed I/O accessors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-03 16:10:47 +00:00
975bfc4188
cns3xxx: add missing kernel config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 15:31:34 +00:00
a7b580a310
[kernel] refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:45:53 +00:00
b2385c1538
[brcm47xx]: bcma: use fallback sprom if sprom on card was not valid
...
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:45:31 +00:00
0056094a98
[brcm47xx]: bcma: initialize sprom earlier
...
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:44:44 +00:00
a65fa180cd
[brcm47xx]: run make kernel_oldconfig
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:44:04 +00:00
7d525bd21f
[brcm47xx]: ignore the last page on bcma based SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:43:40 +00:00
3d85f4a79f
[brcm47xx]: Fix reading sprom from nvram without a prefix
...
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:43:13 +00:00
08ef69592e
[brcm47xx]: improve the check for the memory size
...
This will hopefully fix bug #9360 and #9097 in trunk.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:42:16 +00:00
0654c2a0e6
netifd: update to latest version, should fix clearing ipv6 routes on interface bringup ( #12184 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 23:12:34 +00:00
b38701d91e
[ltq-dsl] remove dependency for pkill
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 22:37:04 +00:00
293dd74caa
[kernel] dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 21:54:31 +00:00
7728944c0b
[atheros] add support for adm6996 phy
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 21:38:02 +00:00
e179b44f1d
[lantiq] tapi was not registeredproperly for most arcadyan boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 20:57:06 +00:00
e1396c49c0
AR71xx/9xxx based routers are the most common these days, select that as the default target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 20:54:35 +00:00
942ee241a8
mac80211: add uci support for configuring antenna gain
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:22 +00:00
6eb0e37631
iw: update to 3.6 and add support for configuring antenna gain
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:16 +00:00
36349413b7
mac80211: fix antenna gain and add support for user-defined antenna gain configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:09 +00:00
198408b924
mac80211: rework the current tx power display patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:02 +00:00
6d37c9e99a
mac80211: fix beacon IE power constraint handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:28:54 +00:00
0a0e654963
build: turn on package parallel builds by default and fix descriptions.
...
By default, this is only used when building with make -j.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:09:41 +00:00
dad87f7f50
Add FIQ support for cns3xxx
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:35:35 +00:00
55b1f50e03
Update board support for Gateworks Laguna Product family
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:34:18 +00:00
c0a60594a8
USB iso mode fixes
...
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:31:22 +00:00
a583b6129e
cmake: update to version 2.8.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 00:07:28 +00:00
f2c23625e1
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:42 +00:00
0af4307860
generic: enable CONFIG_USB_EHCI_TT_NEWSCHED
...
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.
See: http://www.spinics.net/lists/linux-usb/msg31993.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:39 +00:00
98d77709be
[package] 6to4: properly setup Base6to4Interface ( #12251 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 18:30:07 +00:00
3c2b27da2f
ath5k: add a spur mitigation fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 11:12:13 +00:00
b4ae759bbb
ramips: add memory detection code for RT5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 10:18:15 +00:00
ae436c404b
ramips: allow to use custom code for memory size detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 10:18:14 +00:00
0d211243f7
[uml] include sys/resource.h in arch/um/os-Linux/start_up.c ( #12155 )
...
Required for recent (e)glibc systems
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 09:21:01 +00:00
335b61f11a
[cns3xxx]: fix ncores for single-core systems.
...
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:07:17 +00:00
eec34ef032
[cns3xxx]: add i2c retries
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:06:13 +00:00
4f0ecc3ff5
[cns3xxx]: fix pcie abort handling
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:05:19 +00:00
77deb37604
[brcm63xx] remove kmod-spi-bitbang
...
This is no longer a dependency of kmod-spi-bcm63xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 20:11:37 +00:00
0fe0b149fa
generic: add upstream commit id to codel patches and refresh those
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 14:17:17 +00:00
e2356de36b
[kernel] backport the upstream entropy changes ( #11951 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:54:01 +00:00
fa31c1ff06
[targets] get rid of the IRQF_SAMPLE_RANDOM flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:53:58 +00:00
dcae68fe91
[package] mac80211: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:53:54 +00:00
1b0eab1729
[mcs814x] add wmbus-repeater to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:56:50 +00:00
1cd6db74ac
[mcs814x] enable multicast and advanced ip routers configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:53:34 +00:00
c0a7d5c938
[mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:50:20 +00:00
7e02f20eb0
mac80211: avoid sending useless delBA frames on client disassoc
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 16:20:30 +00:00
c85bbac847
ath9k: fix rx filtering for older chipsets, helps with multi-bssid and mesh mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 16:17:18 +00:00
4bae4b20b2
[ramips] make uci-defaults switch detection work on rt5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:47:18 +00:00
d27303e486
[ramips] add ethernet support for rt5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:47:08 +00:00
f00a987a69
[ramips] make ramips ethernet use a register mapping table
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:46:58 +00:00
55fc9a401d
[brcm47xx]: activate failsafe on all ports of the switch and not just port 0.
...
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:04:59 +00:00
cd7d6a23f7
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:41 +00:00
Florian Fainelli
Felix Fietkau
Hauke Mehrtens
John Crispin
Imre Kaloz
Gabor Juhos
Jo-Philipp Wich