- simplify masquerade rule setup
- remove various subshell invocations
- speedup fw() by not relying on xargs and pipes
- rework SNAT support - attach to dest zone, use src_dip/src_dport as snat source
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23024 3c298f89-4303-0410-b956-a3cf2f4a3e73
The CFE of the WRT54G3GV2 expects two firmware images, if one of them
produces a CRC error (which is the case after you installed OpenWrt, as
there is no second image), it writes one of three consecutive bytes to
the flash. (Look for "Image Status : IMG2_BAD" during boot.)
After the third boot with a CRC error, it stops and waits for a new
firmware image. To prevent this 'noset_try_flag' must be set to 1 on boot.
Tested with my own box.
Signed-off-by: Niclas Koeser <nks at informatik.uni-kiel.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23007 3c298f89-4303-0410-b956-a3cf2f4a3e73
- add a helper script to generate opkg.conf, attempt to detect package architecture from packages/
- fix package defaults when no package override is given, IB previously aggregated the defautls of all profiles
- introduce a repositories.conf, allows using remote opkg repositories in imagebuilder
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22978 3c298f89-4303-0410-b956-a3cf2f4a3e73
26 Makefile patches for enabling parallel builds. Tested on Linux (8-core) and Darwin (12-core), individually and from clean build_root. The first set is from trunk, the second is from feeds/packages.
Signed-off-by: Joe Roback <joe@roback.cc>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22965 3c298f89-4303-0410-b956-a3cf2f4a3e73
extracted firmware files were generated with an incorrect umask
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22957 3c298f89-4303-0410-b956-a3cf2f4a3e73
- speeds up rebuild operations
- aligns generated package list format with the one created by opkg on the target
- fixes broken dependency handling in imagebuilder
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22949 3c298f89-4303-0410-b956-a3cf2f4a3e73
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22945 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add a KVM guest subtarget to the x86 target. Since VirtIO is the
preferred I/O virtualization platform for kvm, this target expects it's
root device to be /dev/vda.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22944 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22943 3c298f89-4303-0410-b956-a3cf2f4a3e73
- fix possible endless loop when the family option is used for forwardings
- only generate forwarding rules in SNAT redirect sections if src_dip is specified
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22938 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch exposes the GPIO mask as a module option. This
makes it possible to limit the GPIO lines used by the b43 module.
Useful for those using the GPIO lines for other things like mmc over GPIO.
It is helpful to those not able / interested in recompiling OpenWRT themselves.
The default action is the same as before, that is 0xf gpiomask.
Signed-off-by: Simon Gaynor <openwrt@simong.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22927 3c298f89-4303-0410-b956-a3cf2f4a3e73
Michael Büsch
Jo-Philipp Wich
Florian Fainelli
John Crispin
Hamish Guthrie
Alexandros C. Couloumbis
Felix Fietkau