Felix Fietkau
e09bafca8c
trace-cmd: update to v2.4
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-16 11:39:14 +00:00
Felix Fietkau
06d97f8331
mac80211: fix VHT rate selection
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-16 11:39:07 +00:00
Felix Fietkau
ee7266d742
mac80211: backport list_last_entry
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-16 11:39:01 +00:00
Felix Fietkau
8a328e2d03
mac80211: backport devm_kmemdup
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-16 11:38:55 +00:00
John Crispin
ad6de5d915
ralink: few updates tot he sdhci probe code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-15 14:35:32 +00:00
John Crispin
30492476b8
ralink: make the sdhci module build again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 18:51:41 +00:00
John Crispin
87c8d59b13
ar8216: fix "unused variable" compiler warning
...
Most likely a copy & paste error when deriving ar8327_sw_set_ports
from ar8xxx_sw_set_ports.
Remove unused variable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 17:06:09 +00:00
John Crispin
fed1314b09
lantiq: Concatenate multiple flash chips for lantiq-flash
...
Signed-off-by: Maikel Bloemendal <openwrt@maikelenyvonne.nl>
Tested-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 17:06:04 +00:00
John Crispin
1e3d1eb003
ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
...
Sets the system LED on the EasyLink M150 and mini to lower-case "easylink"
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:58:29 +00:00
John Crispin
3368bcd2ba
ar71xx: adjust MR900 profile for the OpenMesh MR900v2 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:55:32 +00:00
John Crispin
95d7ac2e59
package/uboot-envtools: add OpenMesh MR900v2 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:55:26 +00:00
John Crispin
c1a23063dc
package/om-watchdog: add OpenMesh MR900v2 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:55:19 +00:00
John Crispin
f032d17b71
ar71xx: add sysupgrade support for OpenMesh MR900v2
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:55:14 +00:00
John Crispin
36c0a54462
ar71xx: add user-space support for OpenMesh MR900v2
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:55:04 +00:00
John Crispin
3af38b7f02
ar71xx: add kernel support for the OpenMesh MR900v2
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:58 +00:00
John Crispin
8c13c833fd
ar71xx: create profile and build image for the OpenMesh MR900 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:50 +00:00
John Crispin
a3125f4044
package/uboot-envtools: add OpenMesh MR900 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:45 +00:00
John Crispin
72593dd631
package/om-watchdog: add OpenMesh MR900 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:38 +00:00
John Crispin
a957d63796
ar71xx: enable sysupgrade for the OpenMesh MR900
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:28 +00:00
John Crispin
4fbb94f514
scripts/om-fwupgradecfg-gen.sh: add support for the MR900
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:23 +00:00
John Crispin
3fbd5a35e3
ar71xx: add user-space support for the OpenMesh MR900 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:15 +00:00
John Crispin
bc8ba2c3c2
ar71xx: add kernel support for the OpenMesh MR900 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:54:07 +00:00
John Crispin
8765fe6662
procd: update to latest git HEAD
...
make sure /sys/fs/cgroup is mounted on boot
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:58 +00:00
John Crispin
d95ba48831
lantiq: vgv7519 - set some defaults for leds
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:53 +00:00
John Crispin
890f77892e
lantiq: set default led configuration from /sys entry later, after per board settings
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:48 +00:00
John Crispin
546bd6e2d1
ralink: dont define pm_poweroff
...
this makes gpio-poweroff work
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:40 +00:00
John Crispin
13452fd432
ralink: fix bank detection in mt7621 gpio driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:34 +00:00
John Crispin
1449d55589
ralink: enable the proper drivers in the mt7621 config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:29 +00:00
John Crispin
13c89a7cb6
ralink: fix broken pinmux function naming inside mt7621.c
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:21 +00:00
John Crispin
7ded4f2d0b
ralink: update sdhci driver
...
the new driver handles newer SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:15 +00:00
John Crispin
aa77ecd2b7
ralink: update pcie driver to load ranges from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:07 +00:00
John Crispin
82d17fb64a
ralink: add a new global ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:53:01 +00:00
John Crispin
170c9f6bb6
ralink: update ethernet driver to use new ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:52:52 +00:00
John Crispin
2983053813
ralink: fix the 10mbit bug on mt7621
...
a missing "val =" caused the AN bit in the phy0 reg to be flushed.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:52:47 +00:00
John Crispin
7741062f9b
ralink: improve mt7530 support
...
the SDK does a bit of extra init that we did not do yet when using an external mt7530.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:52:42 +00:00
John Crispin
812305fe4f
ralink: add support for WSR-600/1166
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:52:36 +00:00
John Crispin
48fdd908ac
ralink: mt7621 has a different base addr for PVID
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:52:30 +00:00
John Crispin
a8ee7c422f
ralink: drop some unused code from pci-mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:52:25 +00:00
Matteo Croce
789aa2bf5c
pppd: add option to set custom host-uniq pppoe tag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:39:59 +00:00
Felix Fietkau
5748353e21
ath9k: fix crashes when using shared IRQs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-13 17:38:22 +00:00
John Crispin
8576ed988b
ralink: fix up dts for mt7621 eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-12 14:55:00 +00:00
John Crispin
addf7b958d
ralink: add support for mt7621 ethernet
...
somehow all switch ports still come up as 10mbit.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-12 14:54:50 +00:00
John Crispin
a54174dffa
ralink: more mt7530 fixes
...
make 1166 wan port work. this broke due to the esw_polling bug
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-11 11:46:16 +00:00
John Crispin
bec227fc64
ralink: fix mdio polling of external phys if only 1 phy exists
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-11 11:46:09 +00:00
John Crispin
dbac7e6034
ralink: remove IC plus phy driver
...
this driver confuses some boards
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-11 11:46:02 +00:00
Jo-Philipp Wich
3886bf6881
lldpd: allow discovery protocols to be disabled from menuconfig
...
Signed-off-by: Michel Stam <m.stam@fugro.nl>
[jow: fixed condition for CONFIG_LLDPD_WITH_JSON]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-11 09:49:20 +00:00
Luka Perkov
3c5a4358eb
ralink: DCS-930: enable sound
...
Camera has microphone; in order to use it by default enable sound support.
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-11 00:08:05 +00:00
Luka Perkov
359de534b9
ralink: update DCS-930 dts
...
* read MAC address from factory partition
* remove port defines since there is only one port (most likely C/P error)
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-11 00:05:14 +00:00
Luka Perkov
6c196e1ea7
kirkwood: add support for Linksys EA3500
...
http://wiki.openwrt.org/toh/linksys/ea3500
Signed-off-by: Dan Walters <dan@walters.io>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-10 23:55:10 +00:00
Hauke Mehrtens
c0fd27ae72
kernel: update kernel 3.18 to rc4
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-10 22:51:30 +00:00