ddb0ee9c96
[package] allow building 8021q and bridge as modules
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 22:24:18 +00:00
5a4211170a
[package] kmod-r6040 depends on kmod-libphy
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 19:15:42 +00:00
c8c032629a
lantiq: add runtime generation of /etc/config/network
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 18:21:00 +00:00
e5101a852c
[package] busybox: revert accidentally committed debugging flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 17:54:02 +00:00
7be583d9f4
[package] busybox: fix hexdump segmentation fault with an empty leading format unit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 17:38:55 +00:00
5891c99757
ath9k: reorganize patches, reset hardware after full sleep ( fixes #10349 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 14:53:21 +00:00
e05e38cbda
[package] uhttpd: prevent linking uhttpd binary against crypto libraries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 10:17:59 +00:00
f87c8c3733
[package] broadcom-wl: align RADIUS options with r26482, patch by Etienne Champetier <etienne.champetier@free.fr>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 21:37:53 +00:00
73c7e70a0b
ath9k: do not put the hardware to full-sleep while tx is pending
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 21:21:24 +00:00
5d835b8c1a
ath9k: rework radio stop/start cleanup, avoid duplicate rx/tx stop, avoid early phy stop
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 21:21:03 +00:00
a0481cfb26
[package] base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly.
...
Solves broken key based dropbear login with empty password after r28935.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 19:02:01 +00:00
8f83f4a62f
lantiq: fix falcon build breakage
...
dev-wifi-rt2x00 fails to build on falcon due to missing pci
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 18:55:58 +00:00
0ec8a8b387
ar71xx: fix USB LED on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:15 +00:00
a8b9399527
ar71xx: add a function for selecting output signal on a given GPIO pin
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:14 +00:00
cee3153f01
ar71xx: fix GPIO function handling on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:13 +00:00
2db6e74505
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:11 +00:00
de3ee69258
ar71xx: merge nand scan patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:10 +00:00
6f8941554b
mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
...
The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 14:06:37 +00:00
232c7e73ff
netifd: update to latest version, fixes tcp connection loss issues on dhcp rekey
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 14:06:32 +00:00
b55128a63e
[package] uci: update to latest git rev 7289b2d69aaffa9299b47aaaa0da1e9969ace6c1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:18:09 +00:00
1fdbb4fcbd
ar71xx: fix a compiler warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:47 +00:00
33c5c80fa5
ar71xx: fix GPIO count for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:45 +00:00
54d08f41c9
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:53 +00:00
546895e938
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:51 +00:00
a921ab0827
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:49 +00:00
ed73833a62
ar71xx: add an irq parameter for ar724x_pcibios_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:47 +00:00
6e87fe5dc5
ar71xx: remove hardwired interface parameters from mach-* files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:09 +00:00
6f6b552473
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:07 +00:00
75a8898840
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:05 +00:00
fb3e9ac6b0
[brcm63xx] build images for Pirelli A226M ( #10409 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:22 +00:00
150feffb3b
[brcm63xx] register uart0 on DWV-S0 boards ( #10409 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:18 +00:00
dea0392387
[kernel] refresh 3.0 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:14 +00:00
9efe7cdbb7
[kernel] refresh 2.6.39 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:10 +00:00
f849b5a225
[brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:05 +00:00
351f04672c
[rdc] fix typo, load ip17xx switch module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 18:41:26 +00:00
562bd7628c
ar71xx: enable has_gbit flag on AR724{0,1}
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 17:36:36 +00:00
81359fd675
ar71xx: fixup onboard PCIe chip registration on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:03 +00:00
23823d7a65
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:01 +00:00
8902490d28
madwifi: rename patch from ifxmips -> lantiq
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:10:52 +00:00
c517d3fe7f
uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image
...
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:09:34 +00:00
3e8f76c6c1
include/kernel.mk: don't check for modules.builtin on 2.6.32-
...
modules.builtin is only available in 2.6.33 and later, so fall back to
assuming it's built-in for older kernels.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:45:09 +00:00
8e7450e3c2
ar71xx: ag71xx: add support for getting switch port link status
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:04 +00:00
25722074a3
ar71xx: remove mii_ctrl resources of the ethernet devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:03 +00:00
0e2b6d0d25
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:01 +00:00
f0a3d94dff
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:00 +00:00
51b1d36e03
ar71xx: set MII interface speed from the set_speed callbacks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:59 +00:00
0839b18e6f
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
...
Also rename the corresponding callback functions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:57 +00:00
7e0c585208
ar71xx: ag71xx: remove MII interface setup code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:56 +00:00
b28f1d9516
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:54 +00:00
819f6df245
ar71xx: fix occasional kernel hangs during boot on AR934x
...
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:52 +00:00
Florian Fainelli
John Crispin
Jo-Philipp Wich
Felix Fietkau
Gabor Juhos
Jonas Gorski