ce61f0150c
ar71xx: revert accidental kernel upgrade
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 20:54:12 +00:00
58d1cc210e
ar71xx: add wmac callback for reading soc revision on ar934x
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 20:52:05 +00:00
6887a5ee27
ar71xx: refresh 3.14 kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 20:51:49 +00:00
634e6c6b9a
brcm2708: switch to 3.14
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:11:55 +00:00
607f2bd2c7
brcm2708: add 3.14 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:11:37 +00:00
9200322d21
kernel: add missing CONFIG_BACKLIGHT_GPIO to 3.14
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:11:06 +00:00
c65ec1aa8f
brcm2708: update 3.10 patches with raspberrypi/rpi-3.10.y of 27 Apr. 2014
...
Update the 3.10 rasperry patches by rebasing raspberry/rpi-3.10-y
against linux-stable/v3.10.49.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:10:51 +00:00
63754762b1
kernel: merge two mtdpart.c patches
...
It does not make sense to add some code and remove is 4 patches later.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 09:44:24 +00:00
e05a6326e9
kernel: update bcma to the tag master-2014-09-26 (wireless-next)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 07:49:48 +00:00
c239c5f559
realview: add protocol argument to ucidef_set_interface_raw
...
Now that ucidef_set_interface_raw() has been updated to take a protocol
argument, use that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-25 19:09:17 +00:00
97fc855e6f
bcm53xx: add a patch that fixes booting problems
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-24 21:08:17 +00:00
200e1d786d
ar71xx: ar8216: tagged+untagged on ar8327 ( #12181 )
...
This allows tagged and untagged traffic together on the same port on ar8327
switch devices.
I looked at the first attempt to do this in r40777 (ar71xx: Fix tagged+untagged
operation on AR8327N (#12181 )). I also set the vlan and port egress policies
like that change. But I change vlan_tagged in an less intrusive way. The
tagged/untagged decision is now based on the following rules:
- if vid != pvid then traffic is always tagged
- if vid == pvid then vlan_tagged stores if the traffic should be tagged
Tested on TP-Link WDR-3600 (ar8327N).
Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 10:19:58 +00:00
849e774cd2
ar71xx: ar8216: move policies, pvid to setup_port
...
This moves ingress, egress policy and pvid decisions to setup_port methods.
They arenow device type dependent.
This allows policy changes on only one device type which is needed to allow
tagged + untagged operation on ar8327.
Tested on TP-LINK WDR-3600 (ar8327N).
Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 10:18:38 +00:00
b45b9e2f46
mxs: remove 3.13
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 06:42:29 +00:00
5097d4e459
mxs: disable mmc debugging
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 06:38:58 +00:00
880a3d2799
bcm53xx: image: use IMG_PREFIX for chk images
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 18:11:09 +00:00
cc56566e29
bcm53xx: image: make filesystem a suffix for TRX files
...
This makes TRX files more /compatible/ with firmware files (e.g. CHK).
This will allow us to put some TRX files in BIN_DIR if we need to.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 09:16:20 +00:00
85fbc8df3c
bcm53xx: image: document arguments of various functions
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 08:37:18 +00:00
fc42765c6b
bcm53xx: image: rework Makefile and merge some functions
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 08:04:26 +00:00
84f61f28e7
sunxi: enable GPIO_SYSFS
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 06:15:45 +00:00
829584f1a6
bcm53xx: activate vfpv3 support
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:58:29 +00:00
6c0d0e04ed
bcm53xx: add nand flash driver
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:58:02 +00:00
e04bca5315
bcm53xx: update patches adding bcma support
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:57:17 +00:00
d36def3f4e
bcm53xx: add fixtrx
...
Without running fixtrx the image will not boot at the second time,
because the CRC the boot loader check is invalid at that time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:56:31 +00:00
1683576ed0
bcm53xx: add support for GPIOs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:18:30 +00:00
93ba0ae51f
bcm53xx: rename console fixing patch
...
This squeezes BCM5301X patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:02:38 +00:00
cc5d855f30
sunxi: add AXP209 to pcDuino3
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 20:31:18 +00:00
10354ca6e7
sunxi: enable AXP209 on BananaPi as well
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 17:46:50 +00:00
95302a2e8e
sunxi: enable AXP209 regulator
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 17:45:20 +00:00
a28b6e0d96
sunxi: add sunxi-ir module
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 16:28:06 +00:00
101af46ba0
sunxi: add support for infra receiver on A20, along with IR-related backports from 3.15
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 16:25:45 +00:00
835de3d421
kernel: add missing symbols for 3.14
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 16:24:28 +00:00
dcbfc72a88
sunxi: remove 3.13 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 15:42:36 +00:00
9d4a086a64
ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds naming
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 11:07:08 +00:00
76b4032fe0
lantiq: set 3.14 as default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 10:52:47 +00:00
ea10c39f14
ralink: drop dwc_otg support. dwc2 seems stable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 10:52:37 +00:00
94f0028725
sunxi: update gmac with adding correct regulators on bananapi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 00:13:49 +00:00
914948ebaa
sunxi: backport late clock fixes from 3.15
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 00:12:53 +00:00
665f30a1df
sunxi: update dts for pcduino3 and bananapi with regulators
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:45:08 +00:00
04a55c31d2
sunxi: add usb ohci support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:34:10 +00:00
45cafa800f
sunxi: add default interface for bananaPi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:15:30 +00:00
a98d24e6e8
sunxi: add missing symbol for arch timer
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:12:50 +00:00
3421f4b3b6
kernel: fix backport of bcma init patch
...
Upstream bcma patch:
bcma: use separated function to initialize bus on SoC
was backported incompletely. I missed arch code change.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 21:25:36 +00:00
dfbf70b43d
sdk: predefine kernel version magic
...
Kernel modules which are built using the SDK do not have access
to the .vermagic file in the Linux build dir, therefore the
generated .ipk metadata depends on kernel versions like
'3.10.49-1-unknown' which are not satisfiable by the kernel
meta package in the image.
Fix this problem by substituting 'unknown' with the current
version magic in include/kernel.mk when packing the SDK.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 10:25:47 +00:00
06cbf4e0a3
sunxi: add arm arch timer support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 10:15:05 +00:00
f922e26c9e
kernel: add missing config option
...
This missing option was found by the build bots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-16 21:39:24 +00:00
e5d6c00e3b
Lantiq: fix build warning from dsl_fs script
...
fix inclusion of functions.sh in dsl_fs init script
without this, the following error is seen during build:
./etc/init.d/dsl_fs: line 4: /lib/functions.sh: No such file or directory
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-16 14:53:06 +00:00
78aaed5904
lantiq: move the lantiq,switch property into the interface node
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-16 14:53:01 +00:00
a0bbe0d6ce
postinst trigger: the new postinst trigger broke IB
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-16 11:56:19 +00:00
e2520eb771
sunxi: add new watchdog compats to reboot code in 3.14
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-15 21:05:00 +00:00
Felix Fietkau
Florian Fainelli
Rafał Miłecki
Zoltan HERPAI
Hauke Mehrtens
John Crispin
Jo-Philipp Wich