sunxi: update gmac with adding correct regulators on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42616 3c298f89-4303-0410-b956-a3cf2f4a3e73master
parent
914948ebaa
commit
94f0028725
|
@ -0,0 +1,47 @@
|
|||
diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapi.dts new/arch/arm/boot/dts/sun7i-a20-bananapi.dts
|
||||
--- old/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2014-09-19 01:08:58.000000000 +0200
|
||||
+++ new/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2014-09-19 01:05:02.000000000 +0200
|
||||
@@ -86,6 +86,13 @@
|
||||
allwinner,drive = <0>;
|
||||
allwinner,pull = <1>;
|
||||
};
|
||||
+
|
||||
+ gmac_power_pin_bananapi: gmac_power_pin@0 {
|
||||
+ allwinner,pins = "PH23";
|
||||
+ allwinner,function = "gpio_out";
|
||||
+ allwinner,drive = <0>;
|
||||
+ allwinner,pull = <0>;
|
||||
+ };
|
||||
};
|
||||
|
||||
lradc: lradc@01c22800 {
|
||||
@@ -134,9 +141,10 @@
|
||||
|
||||
gmac: ethernet@01c50000 {
|
||||
pinctrl-names = "default";
|
||||
- pinctrl-0 = <&gmac_pins_mii_a>;
|
||||
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
|
||||
phy = <&phy1>;
|
||||
- phy-mode = "mii";
|
||||
+ phy-mode = "rgmii";
|
||||
+ phy-supply = <®_gmac_3v3>;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
@@ -169,4 +177,16 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
+ reg_gmac_3v3: gmac-3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gmac_power_pin_bananapi>;
|
||||
+ regulator-name = "gmac-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ startup-delay-us = <50000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&pio 7 23 0>;
|
||||
+ status = "okay";
|
||||
+ };
|
||||
};
|
Loading…
Reference in New Issue