fdcbeac21e
fix a crash in ip175c attribute enumeration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 13:57:22 +00:00
3400913521
Add a driver for Atheros AR8216 switches
...
Thanks to Vertical Communications, Inc. for providing access to the documentation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-29 13:02:41 +00:00
f8e84c4e39
swconfig: add a generic switch reset call
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-28 19:16:17 +00:00
b5b7da862a
clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 21:26:44 +00:00
091c38c934
swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 21:26:39 +00:00
01c16ed09b
add IC+ IP175C driver (based on Patrick Horn's driver, see #4050 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:55 +00:00
351fbfd0e2
swconfig: treat struct switch_attr as constant
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:36 +00:00
7b1ce92313
swconfig: remove old debugging stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:30 +00:00
bbdb00cc4e
mvswitch: re-enable header mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-10 11:33:49 +00:00
f08abee438
atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22 20:19:23 +00:00
23eca1d576
mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22 20:18:36 +00:00
36adad2ac2
[kernel] generic-2.6: make MyLoader parser compatible with the old partition tables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-23 11:54:44 +00:00
30b9e9a0c2
[adm5120] move MyLoader partition parser into generic files, will be used on ar71xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17 10:14:58 +00:00
7fc9c0b5e4
improve routing/nat performance for devices using the marvell 88e6060 switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28 17:54:22 +00:00
af835ce516
change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18 21:43:30 +00:00
c4cda8c48a
[kernel] make gpio_dev compatible with GPIOLIB & GPIO_SYSFS ( closes #4016 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-05 13:08:12 +00:00
e930bd912d
[kernel] modules/gpio_dev: move to drivers/char/ on older kernels as well, and create a package for it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-05 09:52:23 +00:00
c85677ecc1
makes ledtrignetdev work on .26 and fix whitespaces
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-04 14:05:04 +00:00
5325f94712
add missing defines for mvswitch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 18:12:38 +00:00
85b0fa9262
some more mvswitch fixes:
...
- initialize the vlan destination map properly
- workaround for moving node bug: clear the ATU database on every PHY poll
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19 23:09:56 +00:00
947a74570d
add extra safety for the packet mangling in the mvswitch driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19 23:09:43 +00:00
a790561538
set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09 10:31:46 +00:00
ff4567f7fe
Remove bogus zero-length ohci-ssb.c in generic-2.6/files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:55:06 +00:00
653cf2c078
enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-29 12:55:44 +00:00
4bfaf896cb
allow bigger packets in the marvell switch (does not fix the mtu problems yet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28 21:59:06 +00:00
cc8a466cb1
fix vlan mapping for cpu port on the marvell switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-24 01:09:47 +00:00
c29df87d31
clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-23 16:28:05 +00:00
e62fdae016
Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 08:29:01 +00:00
3c2c1b1b69
Add stub driver for ADM6996F switches (configured through MII)
...
The driver currently uses a hardcoded VLAN mapping and has no configuration yet
Tested on Accton MR3202a
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 02:53:04 +00:00
04b8b09c2f
[package] move spi_gpio driver into the kernel, clean-up SPI modules
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-15 07:33:43 +00:00
a257340a3e
[kernel] modules/gpio-buttons: fix build error on older kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08 11:49:22 +00:00
9ac8ae9d85
ssb-mips: Fix IRQ routing on the MIPS core.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08 09:15:53 +00:00
546725acb2
[kernel] add a polled GPIO buttons input driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-07 19:54:44 +00:00
c7393b9e65
GPIODEV: Fix open-count race condition.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-19 11:32:08 +00:00
f1e06a1597
add new led trigger for network traffic, fixes #2776
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-07 21:25:02 +00:00
a5c9687c1f
ssb: Update to latest upstream version of ssb.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 01:24:18 +00:00
d3bbaf965b
b43: Make probing of NPHY devices possible.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-18 22:21:29 +00:00
f165889337
"default-on" LED Trigger
...
The current LED subsystem always initialises LEDs in the OFF state. This is fine for most LEDs but some should be on right from boot (e.g. POWER LED). Following some discussion with the LED subsystem maintainers, a trigger was recommended as the best way to implement this functionality.
Here is a patch to add a new trigger "default-on" which will initialise an LED in the ON state. It is not compiled by default.
Particular thanks to Rod Whitby for all his help with this.
Signed-off-by: Nick Forbes <nick.forbes@incepta.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-02 01:21:54 +00:00
b6ed86f4c2
add userspace tool for gpio_dev
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 04:24:05 +00:00
f346e7a030
remove binary file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:17:35 +00:00
bfa7d43bee
add generic gpio char dev for CONFIG_GENERIC_GPIO archs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:16:11 +00:00
613ab757a3
LED driver for PCEngines ALIX boards
...
This patch adds a driver for the three LEDs that exists on the
PCEngines ALIX 2 and 3 series boards.
The driver is also added to the Alix profile.
Signed-off-by: Petr Liebman <petrliebman@gmail.com>
--
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-14 00:52:15 +00:00
851416db8a
Forgot removing that file while applying patch from #2757
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 17:52:27 +00:00
d2354353d1
make morse LED trigger available as a package, and fix it to compile with 2.6.23
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-20 14:32:13 +00:00
939d828c8f
sync ssb with upstream
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-14 02:47:36 +00:00
74840fb58d
back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch for 2.6.23
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13 02:21:24 +00:00
0634c9c679
add patches for 2.6.23 on brcm47xx (not enabled yet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13 02:04:37 +00:00
eb77c1aa6e
add missing file from [9055]
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-28 20:08:55 +00:00
12aa23e200
Move SSB out of brcm47xx target into generic-2.6 target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-01 22:44:05 +00:00
Felix Fietkau
Gabor Juhos
John Crispin
Peter Denison
Michael Büsch
Florian Fainelli