hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Add a driver for Atheros AR8216 switches 

Thanks to Vertical Communications, Inc. for providing access to the documentation

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Felix Fietkau 2009-04-29 13:02:41 +00:00
parent 60bbec4f78
commit 3400913521
8 changed files with 747 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/generic-2.6/config-2.6.28
View File

@ -19,6 +19,7 @@ CONFIG_AIO=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ANON_INODES=y
# CONFIG_APPLICOM is not set
# CONFIG_AR8216_PHY is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_ARCNET is not set
CONFIG_ARPD=y

1
target/linux/generic-2.6/config-2.6.29
View File

@ -20,6 +20,7 @@ CONFIG_AIO=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ANON_INODES=y
# CONFIG_APPLICOM is not set
# CONFIG_AR8216_PHY is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_ARCNET is not set
CONFIG_ARPD=y

1
target/linux/generic-2.6/config-2.6.30
View File

@ -20,6 +20,7 @@ CONFIG_AIO=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ANON_INODES=y
# CONFIG_APPLICOM is not set
# CONFIG_AR8216_PHY is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_ARCNET is not set
CONFIG_ARPD=y

528
target/linux/generic-2.6/files/drivers/net/phy/ar8216.c Normal file
View File

@ -0,0 +1,528 @@
/*
* ar8216.c: AR8216 switch driver
*
* Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/bitops.h>
#include <net/genetlink.h>
#include <linux/switch.h>
#include <linux/delay.h>
#include <linux/phy.h>
#include "ar8216.h"
#define AR8216_REG_PORT_RATE(_i) (AR8216_PORT_OFFSET(_i) + 0x000c)
#define AR8216_REG_PORT_PRIO(_i) (AR8216_PORT_OFFSET(_i) + 0x0010)
struct ar8216_priv {
struct switch_dev dev;
struct phy_device *phy;
u32 (*read)(struct ar8216_priv *priv, int reg);
void (*write)(struct ar8216_priv *priv, int reg, u32 val);
/* all fields below are cleared on reset */
bool vlan;
u8 vlan_id[AR8216_NUM_VLANS];
u8 vlan_table[AR8216_NUM_VLANS];
u8 vlan_tagged;
u16 pvid[AR8216_NUM_PORTS];
};
static struct switch_dev athdev;
#define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
static inline void
split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
{
regaddr >>= 1;
*r1 = regaddr & 0x1e;
regaddr >>= 5;
*r2 = regaddr & 0x7;
regaddr >>= 3;
*page = regaddr & 0x1ff;
}
static u32
ar8216_mii_read(struct ar8216_priv *priv, int reg)
{
struct phy_device *phy = priv->phy;
u16 r1, r2, page;
u16 lo, hi;
split_addr((u32) reg, &r1, &r2, &page);
phy->bus->write(phy->bus, 0x18, 0, page);
lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
return (hi << 16) | lo;
}
static void
ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
{
struct phy_device *phy = priv->phy;
u16 r1, r2, r3;
u16 lo, hi;
split_addr((u32) reg, &r1, &r2, &r3);
phy->bus->write(phy->bus, 0x18, 0, r3);
lo = val & 0xffff;
hi = (u16) (val >> 16);
phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
}
static u32
ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
{
u32 v;
v = priv->read(priv, reg);
v &= ~mask;
v |= val;
priv->write(priv, reg, v);
return v;
}
static int
ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
priv->vlan = !!val->value.i;
return 0;
}
static int
ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
val->value.i = priv->vlan;
return 0;
}
static int
ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
{
struct ar8216_priv *priv = to_ar8216(dev);
priv->pvid[port] = vlan;
return 0;
}
static int
ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
{
struct ar8216_priv *priv = to_ar8216(dev);
*vlan = priv->pvid[port];
return 0;
}
static int
ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
priv->vlan_id[val->port_vlan] = val->value.i;
return 0;
}
static int
ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
val->value.i = priv->vlan_id[val->port_vlan];
return 0;
}
static struct switch_attr ar8216_globals[] = {
{
.type = SWITCH_TYPE_INT,
.name = "vlan",
.description = "Enable VLAN mode",
.set = ar8216_set_vlan,
.get = ar8216_get_vlan,
.max = 1
},
};
static struct switch_attr ar8216_port[] = {
};
static struct switch_attr ar8216_vlan[] = {
{
.type = SWITCH_TYPE_INT,
.name = "pvid",
.description = "VLAN ID",
.set = ar8216_set_vid,
.get = ar8216_get_vid,
.max = 4095,
},
};
static int
ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
u8 ports = priv->vlan_table[val->port_vlan];
int i;
val->len = 0;
for (i = 0; i < AR8216_NUM_PORTS; i++) {
struct switch_port *p;
if (!(ports & (1 << i)))
continue;
p = &val->value.ports[val->len++];
p->id = i;
if (priv->vlan_tagged & (1 << i))
p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
else
p->flags = 0;
}
return 0;
}
static int
ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
{
struct ar8216_priv *priv = to_ar8216(dev);
u8 *vt = &priv->vlan_table[val->port_vlan];
int i, j;
*vt = 0;
for (i = 0; i < val->len; i++) {
struct switch_port *p = &val->value.ports[i];
if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
priv->vlan_tagged |= (1 << p->id);
else {
priv->vlan_tagged &= ~(1 << p->id);
priv->pvid[p->id] = val->port_vlan;
/* make sure that an untagged port does not
* appear in other vlans */
for (j = 0; j < AR8216_NUM_VLANS; j++) {
if (j == val->port_vlan)
continue;
priv->vlan_table[j] &= ~(1 << p->id);
}
}
*vt |= 1 << p->id;
}
return 0;
}
static int
ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
{
int timeout = 20;
while ((priv->read(priv, reg) & mask) != val) {
if (timeout-- <= 0) {
printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
return 1;
}
}
return 0;
}
static void
ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
{
if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
return;
if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
val &= AR8216_VTUDATA_MEMBER;
val |= AR8216_VTUDATA_VALID;
priv->write(priv, AR8216_REG_VTU_DATA, val);
}
op |= AR8216_VTU_ACTIVE;
priv->write(priv, AR8216_REG_VTU, op);
}
static int
ar8216_hw_apply(struct switch_dev *dev)
{
struct ar8216_priv *priv = to_ar8216(dev);
u8 portmask[AR8216_NUM_PORTS];
int i, j;
/* flush all vlan translation unit entries */
ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
memset(portmask, 0, sizeof(portmask));
if (priv->vlan) {
/* calculate the port destination masks and load vlans
* into the vlan translation unit */
for (j = 0; j < AR8216_NUM_VLANS; j++) {
u8 vp = priv->vlan_table[j];
if (!vp)
continue;
for (i = 0; i < AR8216_NUM_PORTS; i++) {
u8 mask = (1 << i);
if (vp & mask)
portmask[i] |= vp & ~mask;
}
if (!priv->vlan_table[j])
continue;
ar8216_vtu_op(priv,
AR8216_VTU_OP_LOAD |
(priv->vlan_id[j] << AR8216_VTU_VID_S),
priv->vlan_table[j]);
}
} else {
/* vlan disabled:
* isolate all ports, but connect them to the cpu port */
for (i = 0; i < AR8216_NUM_PORTS; i++) {
if (i == AR8216_PORT_CPU)
continue;
portmask[i] = 1 << AR8216_PORT_CPU;
portmask[AR8216_PORT_CPU] |= (1 << i);
}
}
/* update the port destination mask registers and tag settings */
for (i = 0; i < AR8216_NUM_PORTS; i++) {
int egress, ingress;
int pvid;
if (priv->vlan) {
pvid = priv->vlan_id[priv->pvid[i]];
} else {
pvid = i;
}
if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
egress = AR8216_OUT_ADD_VLAN;
ingress = AR8216_IN_PORT_FALLBACK;
} else {
egress = AR8216_OUT_STRIP_VLAN;
ingress = AR8216_IN_SECURE;
}
ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
AR8216_PORT_CTRL_LEARN |
(egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
(priv->vlan ? AR8216_PORT_CTRL_SINGLE_VLAN : 0) |
(AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
AR8216_PORT_VLAN_DEFAULT_ID,
(portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
(ingress << AR8216_PORT_VLAN_MODE_S) |
(pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
}
return 0;
}
static int
ar8216_reset_switch(struct switch_dev *dev)
{
struct ar8216_priv *priv = to_ar8216(dev);
int i;
memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
offsetof(struct ar8216_priv, vlan));
for (i = 0; i < AR8216_NUM_VLANS; i++) {
priv->vlan_id[i] = i;
}
for (i = 0; i < AR8216_NUM_PORTS; i++) {
/* Enable port learning and tx */
priv->write(priv, AR8216_REG_PORT_CTRL(i),
AR8216_PORT_CTRL_LEARN |
(4 << AR8216_PORT_CTRL_STATE_S));
priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
/* Configure all PHYs */
if (i == AR8216_PORT_CPU) {
priv->write(priv, AR8216_REG_PORT_STATUS(i),
AR8216_PORT_STATUS_LINK_UP |
AR8216_PORT_STATUS_SPEED |
AR8216_PORT_STATUS_TXMAC |
AR8216_PORT_STATUS_RXMAC |
AR8216_PORT_STATUS_DUPLEX);
} else {
priv->write(priv, AR8216_REG_PORT_STATUS(i),
AR8216_PORT_STATUS_LINK_AUTO);
}
}
/* XXX: undocumented magic from atheros, required! */
priv->write(priv, 0x38, 0xc000050e);
return ar8216_hw_apply(dev);
}
static int
ar8216_config_init(struct phy_device *pdev)
{
struct ar8216_priv *priv;
int ret;
printk("%s: AR8216 PHY driver attached.\n", pdev->attached_dev->name);
pdev->supported = ADVERTISED_100baseT_Full;
pdev->advertising = ADVERTISED_100baseT_Full;
priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
priv->phy = pdev;
priv->read = ar8216_mii_read;
priv->write = ar8216_mii_write;
memcpy(&priv->dev, &athdev, sizeof(struct switch_dev));
pdev->priv = priv;
if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
kfree(priv);
goto done;
}
ret = ar8216_reset_switch(&priv->dev);
done:
return ret;
}
static int
ar8216_read_status(struct phy_device *phydev)
{
struct ar8216_priv *priv = phydev->priv;
phydev->speed = SPEED_100;
phydev->duplex = DUPLEX_FULL;
phydev->state = PHY_UP;
/* flush the address translation unit */
if (ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0))
return -ETIMEDOUT;
priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
return 0;
}
static int
ar8216_config_aneg(struct phy_device *phydev)
{
return 0;
}
static int
ar8216_probe(struct phy_device *pdev)
{
struct ar8216_priv priv;
u8 id, rev;
u32 val;
priv.phy = pdev;
val = ar8216_mii_read(&priv, AR8216_REG_CTRL);
rev = val & 0xff;
id = (val >> 8) & 0xff;
if ((id != 1) || (rev != 1))
return -ENODEV;
return 0;
}
static void
ar8216_remove(struct phy_device *pdev)
{
struct ar8216_priv *priv = pdev->priv;
if (!priv)
return;
unregister_switch(&priv->dev);
kfree(priv);
}
/* template */
static struct switch_dev athdev = {
.name = "Atheros AR8216",
.cpu_port = AR8216_PORT_CPU,
.ports = AR8216_NUM_PORTS,
.vlans = AR8216_NUM_VLANS,
.attr_global = {
.attr = ar8216_globals,
.n_attr = ARRAY_SIZE(ar8216_globals),
},
.attr_port = {
.attr = ar8216_port,
.n_attr = ARRAY_SIZE(ar8216_port),
},
.attr_vlan = {
.attr = ar8216_vlan,
.n_attr = ARRAY_SIZE(ar8216_vlan),
},
.get_port_pvid = ar8216_get_pvid,
.set_port_pvid = ar8216_set_pvid,
.get_vlan_ports = ar8216_get_ports,
.set_vlan_ports = ar8216_set_ports,
.apply_config = ar8216_hw_apply,
.reset_switch = ar8216_reset_switch,
};
static struct phy_driver ar8216_driver = {
.name = "Atheros AR8216",
.features = PHY_BASIC_FEATURES,
.probe = ar8216_probe,
.remove = ar8216_remove,
.config_init = &ar8216_config_init,
.config_aneg = &ar8216_config_aneg,
.read_status = &ar8216_read_status,
.driver = { .owner = THIS_MODULE },
};
int __init
ar8216_init(void)
{
return phy_driver_register(&ar8216_driver);
}
void __exit
ar8216_exit(void)
{
phy_driver_unregister(&ar8216_driver);
}
module_init(ar8216_init);
module_exit(ar8216_exit);
MODULE_LICENSE("GPL");

147
target/linux/generic-2.6/files/drivers/net/phy/ar8216.h Normal file
View File

@ -0,0 +1,147 @@
/*
* ar8216.h: AR8216 switch driver
*
* Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __AR8216_H
#define __AR8216_H
#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s)
#define AR8216_PORT_CPU 0
#define AR8216_NUM_PORTS 6
#define AR8216_NUM_VLANS 16
#define AR8216_REG_CTRL 0x0000
#define AR8216_CTRL_RESET BIT(31)
#define AR8216_REG_VTU 0x0040
#define AR8216_VTU_OP BITS(0, 3)
#define AR8216_VTU_OP_NOOP 0x0
#define AR8216_VTU_OP_FLUSH 0x1
#define AR8216_VTU_OP_LOAD 0x2
#define AR8216_VTU_OP_PURGE 0x3
#define AR8216_VTU_OP_REMOVE_PORT 0x4
#define AR8216_VTU_ACTIVE BIT(3)
#define AR8216_VTU_FULL BIT(4)
#define AR8216_VTU_PORT BITS(8, 4)
#define AR8216_VTU_PORT_S 8
#define AR8216_VTU_VID BITS(16, 12)
#define AR8216_VTU_VID_S 16
#define AR8216_VTU_PRIO BITS(28, 3)
#define AR8216_VTU_PRIO_S 28
#define AR8216_VTU_PRIO_EN BIT(31)
#define AR8216_REG_VTU_DATA 0x0044
#define AR8216_VTUDATA_MEMBER BITS(0, 10)
#define AR8216_VTUDATA_VALID BIT(11)
#define AR8216_REG_ATU 0x0050
#define AR8216_ATU_OP BITS(0, 3)
#define AR8216_ATU_OP_NOOP 0x0
#define AR8216_ATU_OP_FLUSH 0x1
#define AR8216_ATU_OP_LOAD 0x2
#define AR8216_ATU_OP_PURGE 0x3
#define AR8216_ATU_OP_FLUSH_LOCKED 0x4
#define AR8216_ATU_OP_FLUSH_UNICAST 0x5
#define AR8216_ATU_OP_GET_NEXT 0x6
#define AR8216_ATU_ACTIVE BIT(3)
#define AR8216_ATU_PORT_NUM BITS(8, 4)
#define AR8216_ATU_FULL_VIO BIT(12)
#define AR8216_ATU_ADDR4 BIT(16, 8)
#define AR8216_ATU_ADDR5 BIT(24, 8)
#define AR8216_REG_ATU_DATA 0x0054
#define AR8216_ATU_ADDR3 BIT(0, 8)
#define AR8216_ATU_ADDR2 BIT(8, 8)
#define AR8216_ATU_ADDR1 BIT(16, 8)
#define AR8216_ATU_ADDR0 BIT(24, 8)
#define AR8216_PORT_OFFSET(_i) (0x0100 * (i + 1))
#define AR8216_REG_PORT_STATUS(_i) (AR8216_PORT_OFFSET(_i) + 0x0000)
#define AR8216_PORT_STATUS_SPEED BIT(0)
#define AR8216_PORT_STATUS_SPEED_ERR BIT(1)
#define AR8216_PORT_STATUS_TXMAC BIT(2)
#define AR8216_PORT_STATUS_RXMAC BIT(3)
#define AR8216_PORT_STATUS_TXFLOW BIT(4)
#define AR8216_PORT_STATUS_RXFLOW BIT(5)
#define AR8216_PORT_STATUS_DUPLEX BIT(6)
#define AR8216_PORT_STATUS_LINK_UP BIT(8)
#define AR8216_PORT_STATUS_LINK_AUTO BIT(9)
#define AR8216_PORT_STATUS_LINK_PAUSE BIT(10)
#define AR8216_REG_PORT_CTRL(_i) (AR8216_PORT_OFFSET(_i) + 0x0004)
/* port forwarding state */
#define AR8216_PORT_CTRL_STATE BITS(0, 3)
#define AR8216_PORT_CTRL_STATE_S 0
#define AR8216_PORT_CTRL_LEARN_LOCK BIT(7)
/* egress 802.1q mode */
#define AR8216_PORT_CTRL_VLAN_MODE BITS(8, 2)
#define AR8216_PORT_CTRL_VLAN_MODE_S 8
#define AR8216_PORT_CTRL_IGMP_SNOOP BIT(10)
#define AR8216_PORT_CTRL_HEADER BIT(11)
#define AR8216_PORT_CTRL_MAC_LOOP BIT(12)
#define AR8216_PORT_CTRL_SINGLE_VLAN BIT(13)
#define AR8216_PORT_CTRL_LEARN BIT(14)
#define AR8216_PORT_CTRL_MIRROR_TX BIT(16)
#define AR8216_PORT_CTRL_MIRROR_RX BIT(17)
#define AR8216_REG_PORT_VLAN(_i) (AR8216_PORT_OFFSET(_i) + 0x0008)
#define AR8216_PORT_VLAN_DEFAULT_ID BITS(0, 12)
#define AR8216_PORT_VLAN_DEFAULT_ID_S 0
#define AR8216_PORT_VLAN_DEST_PORTS BITS(16, 9)
#define AR8216_PORT_VLAN_DEST_PORTS_S 16
/* bit0 added to the priority field of egress frames */
#define AR8216_PORT_VLAN_TX_PRIO BIT(27)
/* port default priority */
#define AR8216_PORT_VLAN_PRIORITY BITS(28, 2)
#define AR8216_PORT_VLAN_PRIORITY_S 28
/* ingress 802.1q mode */
#define AR8216_PORT_VLAN_MODE BITS(30, 2)
#define AR8216_PORT_VLAN_MODE_S 30
/* ingress 802.1q mode */
enum {
AR8216_IN_PORT_ONLY = 0,
AR8216_IN_PORT_FALLBACK = 1,
AR8216_IN_VLAN_ONLY = 2,
AR8216_IN_SECURE = 3
};
/* egress 802.1q mode */
enum {
AR8216_OUT_KEEP = 0,
AR8216_OUT_STRIP_VLAN = 1,
AR8216_OUT_ADD_VLAN = 2
};
/* port forwarding state */
enum {
AR8216_PORT_STATE_DISABLED = 0,
AR8216_PORT_STATE_BLOCK = 1,
AR8216_PORT_STATE_LISTEN = 2,
AR8216_PORT_STATE_LEARN = 3,
AR8216_PORT_STATE_FORWARD = 4
};
#endif

23
target/linux/generic-2.6/patches-2.6.28/680-phy_ar8216.patch Normal file
View File

@ -0,0 +1,23 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -84,6 +84,10 @@ config IP175C_PHY
tristate "Driver for IC+ IP175C/IP178C switches"
select SWCONFIG
+config AR8216_PHY
+ tristate "Driver for Atheros AR8216 switches"
+ select SWCONFIG
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP175C_PHY) += ip175c.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

23
target/linux/generic-2.6/patches-2.6.29/680-phy_ar8216.patch Normal file
View File

@ -0,0 +1,23 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -84,6 +84,10 @@ config IP175C_PHY
tristate "Driver for IC+ IP175C/IP178C switches"
select SWCONFIG
+config AR8216_PHY
+ tristate "Driver for Atheros AR8216 switches"
+ select SWCONFIG
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP175C_PHY) += ip175c.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

23
target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch Normal file
View File

@ -0,0 +1,23 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -84,6 +84,10 @@ config IP175C_PHY
tristate "Driver for IC+ IP175C/IP178C switches"
select SWCONFIG
+config AR8216_PHY
+ tristate "Driver for Atheros AR8216 switches"
+ select SWCONFIG
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP175C_PHY) += ip175c.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o