Gabor Juhos
97682e0944
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
...
These models are based on the AP99 reference board,
and uses the AR7241 SoC.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:57 +00:00
Gabor Juhos
d18016e1c8
ar71xx: fix network configuration for the TL-WA901N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:52 +00:00
Gabor Juhos
bf40a234de
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:50 +00:00
Gabor Juhos
0baf809de3
ar71xx: add default LED configuration for the TL-MR3020
...
Also use the system LED for diagnostic.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:49 +00:00
Gabor Juhos
2526c08008
ar71xx: add support for TP-Link TL-MR3020
...
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.
I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
USB is working and has been tested with USB mass storage and USB UMTS
stick.
Wifi also seems to work.
Ethernet is working too.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
Gabor Juhos
674aa34176
ar71xx: add support for the ALFA Network N2/N5 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:25 +00:00
Gabor Juhos
859e59397b
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:46 +00:00
Jonas Gorski
a5fdbc09b3
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
...
Thanks netprince for reporting and testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 19:32:40 +00:00
Gabor Juhos
e5d5ffcbc2
ar71xx: connect GMAC0 to the internal switch on DB120
...
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:38 +00:00
Gabor Juhos
1b89ef9b2c
ar71xx: add support for ALFA Network's Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:10 +00:00
Gabor Juhos
a86d2fb99b
ar71xx: rewrite WNDR3700/3800 handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 13:03:54 +00:00
Jo-Philipp Wich
40cbea9b54
[ar71xx] add some missing wndr3800 base-files definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:56:21 +00:00
Gabor Juhos
897691c597
ar71xx: add support for Ubiquiti AirRouter
...
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:02 +00:00
Gabor Juhos
64834fd3a6
ar71xx: configure default led behavior for the OM2P
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:59 +00:00
Gabor Juhos
c2898515e9
ar71xx: use /lib/functions/uci-defaults.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:47 +00:00
Gabor Juhos
3e6d0203d3
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
...
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:04 +00:00
Gabor Juhos
f324cde661
ar71xx: create TL-WA901ND network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:24 +00:00
Gabor Juhos
7fa7bf413a
ar71xx: create ALL0258N network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:23 +00:00
Gabor Juhos
ce845599cf
ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:20 +00:00
Gabor Juhos
0282878582
ar71xx: create WZR-HP-G300NH network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:17 +00:00
Gabor Juhos
c5759b1fb1
ar71xx: create RB-493G network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:12 +00:00
Gabor Juhos
e9214fa4f2
ar71xx: create TL-WR1043ND network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:11 +00:00
Gabor Juhos
ffab58baa6
ar71xx: create WRT160NL network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:09 +00:00
Gabor Juhos
0a1c3b4bb1
ar71xx: create PB92 network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:08 +00:00
Gabor Juhos
bcb5dba8ba
ar71xx: create DIR-825-B1 network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:07 +00:00
Gabor Juhos
cf735fe893
ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:03 +00:00
Gabor Juhos
71d946496e
ar71xx: create RB-450 network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:02 +00:00
Gabor Juhos
d72b269a99
ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:01 +00:00
Gabor Juhos
986666a07d
ar71xx: create RB-433{,U} network config from uci defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:58 +00:00
Gabor Juhos
3b52c3653c
ar71xx: create even more network configs from the uci-defaults script
...
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:56 +00:00
Gabor Juhos
5f5bb28ad3
ar71xx: create more network configs from the uci-defaults script
...
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:54 +00:00
Gabor Juhos
2037793081
ar71xx: create a bunch of network configs from the uci-defaults script
...
Create the default network configuration dynamically for the boards with
a single ethernet interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:52 +00:00
Gabor Juhos
23e7014185
ar71xx: create generic network config from an uci-defaults script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:51 +00:00
Gabor Juhos
18d762e403
ar71xx: add initial support for the TL-WR741ND v4 board
...
The ethernet port LEDs are not working yet.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:52 +00:00
Gabor Juhos
0ed6243ba7
ar71xx: combine LEDs setup in one file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:49 +00:00
Gabor Juhos
2fdf9ce8cb
ar71xx: unify LED names on Planex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:47 +00:00
Gabor Juhos
2c27f3365b
ar71xx: unify LED names on Buffalo boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:46 +00:00
Gabor Juhos
f17abe1ff3
ar71xx: unify LED names on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:44 +00:00
Gabor Juhos
3ef0b9c188
ar71xx: remove LED setup of nonexistent interfaces on RB750
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-31 14:26:56 +00:00
Jo-Philipp Wich
704be5a0f9
[ar71xx] base-files: make sure inittab-console-fixup returns with success ( #10275 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:35:43 +00:00
Gabor Juhos
df6ad73e38
ar71xx: enable login only on the system console by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23 19:56:38 +00:00
Jonas Gorski
8ac7c93036
ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
...
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 11:57:51 +00:00
Gabor Juhos
f6cccf1487
ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:12 +00:00
Gabor Juhos
8dd1a353b7
ar71xx: add uci config for the WLAN LED on the WRT160NL
...
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:49 +00:00
Gabor Juhos
9ebade84cf
ar71xx: use phy0tpt trigger for the WLAN LEDs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:48 +00:00
Gabor Juhos
fa7cdb26c4
ar71xx: Add support for WZR-HP-G301NH
...
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.
While we are at it, also rename the profile to reflect that it now is for
more than one device.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:10 +00:00
Gabor Juhos
1a425b01c1
ar71xx: add support for the WNDR3700v2 board
...
Based on a patch by Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:35:42 +00:00
Gabor Juhos
cb1f0201ee
ar71xx: make uci-default scripts executable
...
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-04 13:44:01 +00:00
Gabor Juhos
5c4c0790fe
ar71xx: use usbdev trigger for USB LEDs by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:16 +00:00
Gabor Juhos
091b041480
ar71xx: populate LED configuration for WZR-HP-G300NH
...
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>
[nand-disk trigger has been removed - juhosg]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:09:57 +00:00
Gabor Juhos
5529e6f9b3
ar71xx: add wlan led for the TL-WR941ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-15 19:55:50 +00:00
Gabor Juhos
b0c01de62d
ar71xx: add nbg460n image generation
...
This adds image generation for NBG460N/550N/550NH boards.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 15:17:03 +00:00
Felix Fietkau
10709def6d
Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )" on submitter's request
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:53:18 +00:00
Felix Fietkau
fa6072d377
ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )
...
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:48:22 +00:00
Gabor Juhos
cf15bf1c2b
ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03 18:14:37 +00:00
Jo-Philipp Wich
8f501d19cd
[ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-13 19:29:51 +00:00
Gabor Juhos
7c36cc3e6e
ar71xx: fix RB750 LED configuration
...
Patch-by: Ray Bellis
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-17 09:24:26 +00:00
Gabor Juhos
05f3bb99df
ar71xx: add uci defaults to fix trx header on the WRT160NL boards
...
* patch by Otto Solares
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 17:38:40 +00:00
Gabor Juhos
8e17bf613a
ar71xx: Add basic WLAN LED control to TL-WR1043ND
...
* thanks to KillaB
* closes #6834
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-25 07:31:17 +00:00
Gabor Juhos
eba10e101f
ar71xx: add uci-defaults for the RB750 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:51 +00:00
Gabor Juhos
c4bc4eaa02
ar71xx: add uci configuration for the WAN LED on the WNDR3700
...
Based on a patch by Scott Dudley <spmsink@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19 11:52:25 +00:00