c51e57d972
ramips: raeth: force link down in ramips_phy_stop
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:52 +00:00
846b753561
ramips: raeth: serialize ramips_link_adjust calls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:50 +00:00
d50d8e09a4
ramips: raeth: add PHYLIB support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 06:47:12 +00:00
da1a1a53cb
ramips: rt3883: enable PCI on the RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:44 +00:00
625c6573c7
ramips: rt3883: add PCI support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:42 +00:00
5b15128f66
ramips: use SoC specific irq.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:40 +00:00
4b03e2a14b
ramips: add preliminary support for the Asus RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:04 +00:00
be0de7b856
ramips: raeth: enable MDIO code for RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:03 +00:00
6ae4d22d3a
ramips: add preliminary support for the RT3662/RT3883 SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:17:59 +00:00
a01fc48535
ramips: include 'linux/module.h' in the ramips_spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:13 +00:00
ef90fcb865
ramips: rt288x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:12 +00:00
48d4c19885
ramips: rt305x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:10 +00:00
1ec7090374
ramips: remove yet another CONFIG_MTD_PARTITION ifdef
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 19:37:11 +00:00
0e7a5607b4
ramips: use gpio-keys-polled instead of gpio-buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 19:37:06 +00:00
a938ca31da
ramips: add MIPS platform file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 18:16:11 +00:00
59a817f8aa
ramips: add MDIO bus support for RT288X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 16:49:56 +00:00
bf98da9c80
ramips: raeth: make debugging messages configurable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:10 +00:00
69e3d1bbc4
ramips: raeth: use device pointer in DMA API calls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30449 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:08 +00:00
110d4ac69d
ramips: raeth: add netdev pointer to private structure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:06 +00:00
49ec435276
ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:05 +00:00
03f6e838c1
ramips: raeth: unmap rx DMA address in ramips_cleanup_dma
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:04 +00:00
edf1212d0f
ramips: raeth: add rx_dma array to store the DMA address of the rx packets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:02 +00:00
b527da9716
ramips: raeth: use dma_addr_t for the descriptors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:01 +00:00
527df10ce9
ramips: raeth: unmap DMA memory when a packet is received
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:56 +00:00
4ab419384e
ramips: raeth: add a temporary pktlen variable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:55 +00:00
8ecf5cdf0f
ramips: raeth: protect macro parameters
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:50 +00:00
9ab3461a35
ramips: raeth: indicate dropped packets in stats
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:49 +00:00
6653e13884
ramips: raeth: use the NUM_TX_DESC for the tx_skb array
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:47 +00:00
cba394b389
ramips: use uncached address in detect_mem_size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:45 +00:00
7c64e707bb
ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30437 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:43 +00:00
e26a25dade
ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:41 +00:00
f42d3fde3b
ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
...
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19 .
This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210
It's also worth noting that this board has a GPIO line to control the
power to the USB port.
[juhosg:
- fix checkpatch warnings,
- reorder Kconfig entry,
- merge the sysupgrade patch,
- add GPL header]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:36 +00:00
0822eb50cf
ramips: fix compiler warning in prom.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30424 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 17:38:46 +00:00
95d23e7497
ramips: change vlan_config for the ALFA W502U board
...
This change moves the WAN port into a separate VLAN.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:34:10 +00:00
ab13e563a8
ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
...
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.
Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt
[juhosg: reordered some parts in order to keep things sorted
alphabetically]
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 10:44:23 +00:00
523eae8c33
ramips: add kernel support for ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:45 +00:00
1bf0a3ebdf
ramips: scripts updates
...
In this patch:
* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
defined as usb led earlier, just in wrong place) - it should have
router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
default and the led is hidden also but if you are going to solder
the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 10:23:32 +00:00
b58ab60fff
ramips: Rework ramips_eth to not require irqsave locking anymore
...
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.
This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-17 11:23:11 +00:00
8c1f52f521
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
...
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:43 +00:00
6d8bc6597d
ramips: rt288x: change base address and window size of flash bank 0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:36 +00:00
51a587a8b0
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:32 +00:00
eef3b4c418
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:56:30 +00:00
c9bc227e9d
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:16 +00:00
20b3755c63
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:10 +00:00
f3f765817f
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:05 +00:00
8a07cba2b5
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:51:26 +00:00
0dd3da8e65
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-04 15:24:57 +00:00
33678d2d30
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:42 +00:00
f25326846b
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:41 +00:00
28f21bbb71
ramips: Support for NexAira BC2
...
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]
Signed-off-by: Adam Porter <porter.adam at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:36 +00:00
d0e52cf25f
ramips: fix switch-port assignment for HW550-3G
...
WAN is on swtich port 0 for Aztech HW550-3G.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:32 +00:00
f63c57a192
ramips: rt305x: add support for the ZyXEL NBG-419N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-22 20:41:49 +00:00
ebad03e72c
ramips: rt305x: remove unused defines from mach-nw718.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-22 20:41:48 +00:00
ef52c36894
ramips: sort Makefile entries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-22 20:41:47 +00:00
745fda16f9
ramips: sort RAMIPS_MACH_* defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-22 20:41:45 +00:00
a74010be92
ramips: remove 'default [yn]' keywords from machine Kconfig entries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-19 15:55:12 +00:00
8cfb546a31
ramips: rt305x: support for wr512-3gn-like routers
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-19 15:55:10 +00:00
b112f90667
ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-19 15:55:08 +00:00
5aa2ccc214
ramips: rt305x: make config and factory partitions read-only on the ATP-52B
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 18:55:48 +00:00
48128d4827
ramips: rt305x: add dwc_otg driver
...
Based on a patch by Layne Edwards <ledwards@astrumtech.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 14:11:55 +00:00
e9b4c3791f
ramips: rt305x: register the dwc_otg device on the relevant boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 14:11:52 +00:00
6286758d9f
ramips: rt305x: add dwc_otg platform device
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 14:11:51 +00:00
fa14f8d965
ramips: add support for Argus ATP-52B
...
[The ESW related changes has been removed - juhosg]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 14:11:45 +00:00
2fd3aff0ad
ramips: allow to specify port layout for the switch of the RT305x/RT3350
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 14:11:43 +00:00
70c7a660bf
ramips: rt305x: add support for the Netcore NW718 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:32 +00:00
b84decf4df
ramips: rt305x: add support for the Asus RT-G32 B1 board
...
Based on a patch by: Sergiy <piratfm@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:30 +00:00
ca953db190
ramips: rt305x: introduce rt305x_register_spi helper
...
Based on a patch by Sergiy <piratfm@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:27 +00:00
a5c4fa9526
ramips: add SPI controller driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:25 +00:00
5ce157d053
ramips: rt305x: add support for the DIR-600 B1,B2 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:24 +00:00
bbbe814948
ramips: rt305x: change machine id for DIR-300
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:22 +00:00
e35bcee9aa
ramips: rt305x: rename LEDs on the DIR-300-B1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:21 +00:00
92e8aa57bd
ramips: rt305x: sort Kconfig/Makefile entries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:19 +00:00
9e73b3969d
rtl8366: unify rtl8366s and rtl8366rb platform data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24 14:40:23 +00:00
73fb225fd0
ramips: merge 2.6.39 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:10 +00:00
e81daf7520
ramips: specify eeprom file name on RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:00 +00:00
ebbad38d27
ramips: specify eeprom file name on RT288X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:59 +00:00
40c6970c30
ramips: use lowercase partiion names on the WCR150GN board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:53 +00:00
420a1bc0f7
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:49 +00:00
8ac8cc88eb
ramips: consistently use 'firmware' name for sysupgrade partitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:48 +00:00
356abe23cf
ramips: fix a section mismatch warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:46 +00:00
e324614143
ramips: remove unused include from the common GPIO code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:44 +00:00
0e8f2c6cc6
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:41 +00:00
46cc717148
ramips: set cp0_perfcount_irq for RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:40 +00:00
ed7f15e6cf
ramips: initial board support for MOFI3500-3GN
...
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This
router is basically the NA version of the HW550-3G.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-04 08:43:07 +00:00
729eb335e4
ramips: UPF_FIXED_TYPE must be set for the serial ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:20:03 +00:00
8eb654c4ef
ramips: define GPIO chips separately for each SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:59 +00:00
2e1b24966f
ramips: move GPIO definitions into a separate header file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:57 +00:00
878f3adcc0
ramips: setup GPIO chip functions on the fly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:51 +00:00
c31af34adb
ramips: use separate register base for GPIO chips
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:48 +00:00
2775635f6a
ramips: fix dir-300 mtd layout
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:45 +00:00
337e5d8f01
ramips: enable MDIO on the HW550-3G board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:41 +00:00
3dbd1d3156
ramips: add sysupgrade and status LED support for HW550-3G
...
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:40 +00:00
f564424e07
ramips: initial board support for Aztech HW550-3G
...
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 16:34:52 +00:00
9ad6aac6db
ramips: register watchdog device on the rt288x boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:52 +00:00
7c1dfa1706
ramips: add watchdog device for RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:50 +00:00
777c494bef
ramips: register watchdog device on the rt305x boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:47 +00:00
51c418f726
ramips: add watchdog device for RT305x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:46 +00:00
f141ac688e
ramips: add watchdog driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:41 +00:00
044ba6d28f
ramips: implement clock API for RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:39 +00:00
0bd787a602
ramips: implement clock API for RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:35 +00:00
baa05587d0
ramips: remove extern and __init from function prototypes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:33 +00:00
f8f6fc147b
ramips: ramips_esw: fix typos
...
Patch from #8577 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-04 13:44:05 +00:00
91714565c1
ramips: handle OTG interrupt on the RT305x SoC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 08:00:25 +00:00
ecee65d7f6
ramips: ramips_esw: add more definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:33 +00:00
c1bae026dc
ramips: ramips_esw: add helper function to set pvid
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24339 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:28 +00:00
dc512ca5aa
ramips: ramips_esw: add helper function to set vlan members
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:25 +00:00
858c6453a0
ramips: ramips_esw: add helper function to set VLAN id
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:22 +00:00
34c6ad037a
ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:16 +00:00
344bbc134e
ramips: ramips_esw: use rt305x_esw prefix in function names
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:14 +00:00
476af593dd
ramips: ramips_esw: coding style cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:12 +00:00
420f65d3d6
ramips: ramips_esw: add defines for switch register offsets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:07 +00:00
5647401655
ramips: ramips_esw: don't touch GPIO_PURPOSE register
...
It must have been set by the board initialization code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:04 +00:00
418e052c05
ramips: ramips_esw: convert it to be a platform driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:00 +00:00
a0e968135a
ramips: ramips_esw: move hardware initialization into a separate function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:14:58 +00:00
cf67d0b29a
ramips: ramips_esw: use a private structure for the functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:14:54 +00:00
582dad46c0
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05 20:14:30 +00:00
231f17d61e
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:23 +00:00
404b68fcd2
ramips: Use NET_IP_ALIGN instead of hardcoding 2
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:18 +00:00
00bd3f47c4
ramips: DMA map the correct RX skb size
...
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:16 +00:00
77a769e423
ramips: Don't trigger BUG_ON due to skb allocation failure
...
Instead just drop the rx'ed frame silently and reuse the already
available buffer.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:12 +00:00
be87c0dac9
ramips: Remove unnecessary skb_put
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:08 +00:00
e3647801e9
ramips: Allow ethernet interface to be taken down and up again
...
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-05 14:10:34 +00:00
966de4fbd4
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:43:34 +00:00
d572e1483f
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15 09:43:07 +00:00
62d8c17df5
ramips: register ethernet device on the RT-N15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:46 +00:00
5c7c1c3dba
ramips: add generic ethernet device for the RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:43 +00:00
69e79c381f
ramips: add mdio_cfg configuration for the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:40 +00:00
5cce2b0a05
ramips: Fix bridging in ramips ethernet driver
...
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.
The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.
Fix this by using skb_put to correctly set skb->len and skb->tail.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:07 +00:00
33eba7e060
ramips: protect GPIO register access with a spinlock
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:04 +00:00
c463512391
Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
...
Signed-off-by: Helmut Schaa
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-31 11:57:32 +00:00
464c781c2b
ramips: merge slab patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:28 +00:00
5430b616f4
ramips: use COMMAND_LINE_SIZE directly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:24 +00:00
0baf6687af
ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 09:25:37 +00:00
0b03ed8938
ramips: annotate device register function prototypes with __init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:28 +00:00
21a793245c
ramips: register wifi device for the RT2880 based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:23 +00:00
d06a46616e
ramips: add wifi device for the RT2880 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:20 +00:00
7e95b7a597
ramips: register wifi device on the rt305x based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 21:24:10 +00:00
b58b53b236
The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 12:04:05 +00:00
cfafa18012
[ramips] Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 10:06:05 +00:00
7b441cdc46
ramips_eth: cleanup mac_address changing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 17:56:36 +00:00
f549d2c926
ramips_eth: update register offsets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 17:56:33 +00:00
a6165a962c
ramips_eth: pass sys_clk via platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 17:56:30 +00:00
a0de90ddb3
ramips_eth: add helper functions to {ed,dis}able interrupts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:53 +00:00
162e987f39
ramips_eth: remove unnecessary typecasts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:51 +00:00
b84db9ddc3
ramips_eth: simplify tx_next computation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:48 +00:00
150f80a0ed
ramips_eth: simplify tx descriptor initialization
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:46 +00:00
6a51bbb104
ramips_eth: pass 'raeth_priv' struct directly to dma specific functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:43 +00:00
58e0c44256
ramips_eth: convert to use netdev_ops
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:38 +00:00
bf61c26b5f
ramips_eth: fix invalid register writes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:26:02 +00:00
8f1e2c9fdc
ramips_eth: move memset call out from the loop
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:59 +00:00
aed7757589
ramips_eth: header file cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:57 +00:00
2f687349c6
ramips_eth: coding style cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:55 +00:00
64604acf17
ramips: register gpio buttons on the Fonera 2.0N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:52 +00:00
5bf32a94ca
ramips: register gpio buttons on the WHR-G300N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:49 +00:00
c5436e9b6d
ramips: register gpio buttons on the V22RW-2x2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:47 +00:00
d6e8454581
ramips: register gpio buttons on the DIR-300 revB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:44 +00:00
af219a1496
ramips: fix wrong base addresses for the RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:41 +00:00
76a944fdca
ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:36 +00:00
0114fbb17b
ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:33 +00:00
3ee7842268
ramips: cleanup WZR-AGL300NH board support file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:29 +00:00
6081d8167f
ramips: register gpio-buttons on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:25 +00:00
70c02eb229
ramips: add common gpio-buttons device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:20 +00:00
055f8363db
ramips: register rtl8366s device on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:16 +00:00
7a147bbabd
ramips: sanitize return value of ramips_gpio_get
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:08 +00:00
9f3818d5e0
ramips: update mips multi-machine stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:03 +00:00
ab82f72a29
[ramips] add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-24 23:31:49 +00:00
2cf10bd0e6
ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 15:15:41 +00:00
78fb561524
[ramips] missing header file changes, and fix mtu value
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 09:18:40 +00:00
99e448a10a
[ramips] fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 21:08:11 +00:00
100904760d
[ramips] hopefully fixes dma issues seen on ethernet driver when under high load
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18203 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 12:51:45 +00:00
763125a873
ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:51 +00:00
1ec1193c4f
ramips: use definitions from rt305x_regs, and nuke the duplicated ones
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:48 +00:00
888efa12d8
ramips: move ramips_eth_platform_data into a separate file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:45 +00:00
84327abca9
ramips: request_irq prior to dma allocation, and handle the case if it fails
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:42 +00:00
5015ba2730
ramips: add error handling to ramips_alloc_dma
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:39 +00:00
b227b3e3df
ramips: free allocated skbs in ramips_cleanup_dma
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:37 +00:00
73e450cced
ramips: add ramips_setup_dma helper to the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:34 +00:00
87b8fa8353
ramips: add ramips_cleanup_dma helper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:29 +00:00
44cff07470
ramips: remove unnecessary includes in the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:26 +00:00
e450aca1ee
ramips: fix dma api usage in the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:22 +00:00
9f663a5fc9
ramips: use resource to pass irq and base address to the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:18 +00:00
335e77a81c
ramips: add error-path handling to the ramips_eth_plat_probe
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:13 +00:00
c9ec1904ac
[ramips] fixes licenses
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 17:41:01 +00:00
87faf4bfcc
[ramips] clean up dma api of ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 16:58:00 +00:00
caede0a0ac
[ramips] fixes dma bug in eth driver, that was caused under high net load. the dma ring was not initialized on time
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 14:34:55 +00:00
a48af4fc64
ramips: nuke net_device stats from the private data of the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 09:37:30 +00:00
7e4f38482d
ramips: remove unnecessary type-castings in the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 09:37:27 +00:00
cb237e1264
ramips: change debug message levels, and add missing LFs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 09:37:24 +00:00
4757ce1519
ramips: make ethernet fuctions static
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 09:37:21 +00:00
a4409e091d
ramips: register ethernet device on the DIR-300 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 09:37:17 +00:00
fda1a60882
ramips: change prom code to accept 'board=FOOBAR' from the command line
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 07:10:16 +00:00
08ab8b3070
ramips: modify {read,write}_config helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 07:10:14 +00:00
ce7f6a8083
ramips: nuke config_access helper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 07:10:11 +00:00
9914ec2666
[ramips] fixes dma hangups in eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 00:11:08 +00:00
d87fd1b74f
[ramips] make ethernet a platform device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18135 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-24 20:58:41 +00:00
e52ca012a7
[ramips] missing define to make mach for fonera20n work
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18134 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-24 20:57:59 +00:00
5178e58cb9
[ramips] make default llll/w vlan setup in esw
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-24 20:56:31 +00:00
749f1515a4
[ramips] adds mach type for fonera20n
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-24 20:55:36 +00:00
d363b3d5d7
[ramips] adds ethernet driver, esw needs to be moved to swconfig, driver is missing rt288x support, not a platform device yet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-23 16:51:51 +00:00
2e6af22dfc
ramips: add preliminary support for the DIR-300 revB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-18 08:48:07 +00:00
Gabor Juhos
John Crispin
Felix Fietkau
Jo-Philipp Wich