ramips: add support for Argus ATP-52B
[The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27991 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Gabor Juhos
parent
2fd3aff0ad
commit
fa14f8d965
|
|
@ -41,6 +41,7 @@ case "$FIRMWARE" in
|
|||
rt2x00_eeprom_extract "devconf" 0 272
|
||||
;;
|
||||
|
||||
argus-atp52b | \
|
||||
f5d8235v2 | \
|
||||
fonera20n | \
|
||||
hw550-3g | \
|
||||
|
|
|
|||
|
|
@ -10,6 +10,9 @@ ramips_board_name() {
|
|||
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
|
||||
|
||||
case "$machine" in
|
||||
*"Argus ATP-52B")
|
||||
name="argus-atp52b"
|
||||
;;
|
||||
*"Aztech HW550-3G")
|
||||
name="hw550-3g"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -25,6 +25,7 @@ enum ramips_mach_type {
|
|||
RAMIPS_MACH_NW718, /* Netcore NW718 */
|
||||
|
||||
/* RT3052 based machines */
|
||||
RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */
|
||||
RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
|
||||
RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
|
||||
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */
|
||||
|
|
|
|||
|
|
@ -2,6 +2,12 @@ if RALINK_RT305X
|
|||
|
||||
menu "Ralink RT350x machine selection"
|
||||
|
||||
config RT305X_MACH_ARGUS_ATP52B
|
||||
bool "Argus ATP-52B support"
|
||||
default y
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
select RALINK_DEV_GPIO_LEDS
|
||||
|
||||
config RT305X_MACH_RT_G32_REVB
|
||||
bool "Asus RT-G32 revB board support"
|
||||
default y
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o clock.o
|
|||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
||||
obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
|
||||
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
|
||||
obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
|
||||
obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,114 @@
|
|||
/*
|
||||
* Argus ATP-52B router support
|
||||
* http://www.argus-co.com/english/productsview.php?id=70&cid=81
|
||||
*
|
||||
* Copyright (C) 2011 Roman Yeryomin <roman@advem.lv>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
|
||||
#include <asm/mach-ralink/machine.h>
|
||||
#include <asm/mach-ralink/dev-gpio-buttons.h>
|
||||
#include <asm/mach-ralink/dev-gpio-leds.h>
|
||||
#include <asm/mach-ralink/rt305x.h>
|
||||
#include <asm/mach-ralink/rt305x_regs.h>
|
||||
|
||||
#include "devices.h"
|
||||
|
||||
#define ARGUS_ATP52B_GPIO_LED_RUN 9
|
||||
#define ARGUS_ATP52B_GPIO_LED_NET 13
|
||||
#define ARGUS_ATP52B_GPIO_BUTTON_WPS 0
|
||||
#define ARGUS_ATP52B_GPIO_BUTTON_RESET 10
|
||||
#define ARGUS_ATP52B_BUTTONS_POLL_INTERVAL 20
|
||||
|
||||
static struct gpio_led argus_atp52b_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "argus_atp52b:green:run",
|
||||
.gpio = ARGUS_ATP52B_GPIO_LED_RUN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "argus_atp52b:amber:net",
|
||||
.gpio = ARGUS_ATP52B_GPIO_LED_NET,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_button argus_atp52b_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "wps",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.threshold = 3,
|
||||
.gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.threshold = 10,
|
||||
.gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition argus_atp52b_partitions[] = {
|
||||
{
|
||||
.name = "bootloader",
|
||||
.offset = 0,
|
||||
.size = 0x030000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "config",
|
||||
.offset = 0x030000,
|
||||
.size = 0x010000,
|
||||
}, {
|
||||
.name = "factory",
|
||||
.offset = 0x040000,
|
||||
.size = 0x010000,
|
||||
}, {
|
||||
.name = "kernel",
|
||||
.offset = 0x050000,
|
||||
.size = 0x120000,
|
||||
}, {
|
||||
.name = "rootfs",
|
||||
.offset = 0x170000,
|
||||
.size = 0x680000,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
static struct physmap_flash_data argus_atp52b_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.nr_parts = ARRAY_SIZE(argus_atp52b_partitions),
|
||||
.parts = argus_atp52b_partitions,
|
||||
#endif
|
||||
};
|
||||
|
||||
static void __init argus_atp52b_init(void)
|
||||
{
|
||||
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
|
||||
rt305x_register_flash(0, &argus_atp52b_flash_data);
|
||||
ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio),
|
||||
argus_atp52b_leds_gpio);
|
||||
ramips_register_gpio_buttons(-1, ARGUS_ATP52B_BUTTONS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(argus_atp52b_gpio_buttons),
|
||||
argus_atp52b_gpio_buttons);
|
||||
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
|
||||
rt305x_register_ethernet();
|
||||
rt305x_register_wifi();
|
||||
rt305x_register_wdt();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B",
|
||||
argus_atp52b_init);
|
||||
|
|
@ -199,6 +199,18 @@ define Image/Build/Profile/WCR150GN
|
|||
endef
|
||||
|
||||
|
||||
mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
|
||||
mtd_argus_atp52b_kernel_part_size=1179648
|
||||
mtd_argus_atp52b_rootfs_part_size=6815744
|
||||
define Image/Build/Template/ARGUS_ATP52B
|
||||
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/ARGUS_ATP52B
|
||||
$(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
|
||||
endef
|
||||
|
||||
|
||||
mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
|
||||
mtd_f5d8235_kernel_part_size=1572864
|
||||
mtd_f5d8235_rootfs_part_size=6356992
|
||||
|
|
@ -213,6 +225,7 @@ endef
|
|||
|
||||
ifeq ($(CONFIG_RALINK_RT305X),y)
|
||||
define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
|
||||
$(call Image/Build/Profile/DIR300B1,$(1))
|
||||
$(call Image/Build/Profile/RTG32B1,$(1))
|
||||
$(call Image/Build/Profile/FONERA20N,$(1))
|
||||
|
|
|
|||
|
|
@ -91,6 +91,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
|
|||
# CONFIG_RALINK_RT288X is not set
|
||||
CONFIG_RALINK_RT305X=y
|
||||
CONFIG_RAMIPS_WDT=y
|
||||
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
|
||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
||||
CONFIG_RT305X_MACH_F5D8235_V2=y
|
||||
CONFIG_RT305X_MACH_FONERA20N=y
|
||||
|
|
|
|||
Loading…
Reference in New Issue