c28528a913
mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-28 19:17:19 +00:00
6ee5434d24
[lantiq] ar9 did not load atm driver properly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 10:16:52 +00:00
a52f5c57e3
[lantiq] dont use input layer for gpio buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:04:20 +00:00
5a6b12149a
[lantiq] default switch setup for WBMR
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:04:12 +00:00
c2951f7a26
[lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143 )
...
Tested only on the wbmr-hp-g300h, could affect/break other devices.
Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:04:04 +00:00
6a50405768
[lantiq] adds script to set wps info on boards with a wps button
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:03:59 +00:00
9e6f0ec839
[lantiq] minor tweaks to WBMR image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:03:54 +00:00
99a3a72f11
[lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 14:41:35 +00:00
f0eac14112
[lantiq] fix typo inside fritz3370 devicetree file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 14:41:30 +00:00
e975fbe3fb
[lantiq] more devicetree fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:55 +00:00
3973731301
[lantiq] improve button handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:50 +00:00
2a00066a53
[lantiq] add phy-reset gpio handling to xrx200-net
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:44 +00:00
270bb4fee4
[lantiq] add more lantiq phy ids based on daniels uboot code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:40 +00:00
f4d889b9be
[lantiq] refresh patch and install v1.1 gphy blobs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:35 +00:00
2187917371
[lantiq] adds a fix for ar8216 mii detection on etop driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:20:24 +00:00
f1b359fecb
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:50 +00:00
ffe3325930
[lantiq] minor basefiles fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 15:17:42 +00:00
bfed5c6801
[lantiq] fix gptu clocks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 15:17:31 +00:00
cb8fc67686
[lantiq] more board file fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 15:17:11 +00:00
422825b495
[lantiq] fix gptu patch - tapi should now load
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-18 20:12:57 +00:00
018816333c
[lantiq] update to 3.7.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-18 19:32:01 +00:00
9383f6fa7d
[lantiq] make pinctrl-falcon honour status="disbaled";
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16 10:03:28 +00:00
10ddaf7cbc
[lantiq] fix falcon profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16 10:03:23 +00:00
bcb1d9c43b
[lantiq] fix i2c-lantiq module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16 10:03:18 +00:00
84b15c5385
[lantiq] add falcon devicetree files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16 10:03:11 +00:00
a7f6281e29
[lantiq] select hcd as a default package for the dgn3500
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15 11:01:16 +00:00
ab0787e58f
[lantiq] EASY80920 has 2 usb ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15 11:01:11 +00:00
4257df4d28
[lantiq] remove 3.3 and 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15 02:01:08 +00:00
dc4a41291d
[lantiq] cleanup basefiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15 02:01:00 +00:00
8bfb4ab15b
[lantiq] clean up modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15 02:00:55 +00:00
62e5c9fddf
[lantiq] add devicetrees
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15 02:00:20 +00:00
48db0765a6
[lantiq] add linux-v3.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15 01:59:45 +00:00
2c0ebd76cf
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-11 20:14:39 +00:00
77279cff10
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34578 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-08 15:01:33 +00:00
6e6c016e80
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29 15:21:41 +00:00
b8f87e36f2
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29 15:21:35 +00:00
56e999eaf3
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29 07:42:19 +00:00
811c89a11d
[lantiq] adds proper package selection for dgn3500
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-21 06:06:48 +00:00
a0e5999983
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 08:41:31 +00:00
1d0ec1e960
[lantiq] fixes ar9 / dgn3500 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 08:54:14 +00:00
5c300b9f41
[lantiq] add more profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:58 +00:00
3a08b05184
[lantiq] a few more dts files (WIP)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:43 +00:00
c27f32609a
[lantiq] add mtd split and atm patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:30 +00:00
ce0ec8cf6f
[lantiq] add OWRTDTB marker patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 10:39:43 +00:00
8dd03e55f9
[lantiq] add support for arv7525
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 07:38:24 +00:00
d7e7749443
kernel: update linux 3.6 to 3.6.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:22:09 +00:00
434f5edbf7
[lantiq] 3.6 is not the default yet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-03 13:29:44 +00:00
403bf784c9
[lantiq] adds dts files and make devicetree images buildable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:47 +00:00
2b11c5869f
[lantiq] update ase target for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:41 +00:00
613f20baba
[lantiq] add subtarget, as of 3.6 we dont seperate xway SoC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:36 +00:00
3c3f1ddfbd
[lantiq] adds 3.6 files, patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:26 +00:00
5a5e4b2782
[lantiq] move files/ -> files-3.3/
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:02 +00:00
bd7dc4e3ea
[lantiq] prepare Makefile for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:06:51 +00:00
e036077e9e
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 10:11:05 +00:00
fb47a917c2
drop GPIODEV platform code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 21:53:37 +00:00
e179b44f1d
[lantiq] tapi was not registeredproperly for most arcadyan boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 20:57:06 +00:00
df1e2bf058
generic: move GENERIC_PWM symbol into the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 06:38:31 +00:00
aeec5aa62f
lantiq: fix sx76x default uci network configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06 00:09:46 +00:00
00f2d18224
[lantiq] pci gpio mapping
...
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 12:14:43 +00:00
2307592764
[lantiq] W502V/ARV4525 wireless mac bugfix
...
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-04 20:14:52 +00:00
ce06d1cf7b
[lantiq] cleanup patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-03 08:53:02 +00:00
894d03b715
[lantiq] fixes i2c clock enable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 13:29:49 +00:00
f3513b1b9b
[lantiq] add lantiq svip support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 18:49:54 +00:00
c5b2a22982
[lantiq] rebase config-3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 17:28:25 +00:00
33b2ded9b9
[lantiq] move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
...
This broke falcon builds
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 15:33:01 +00:00
ff53498dd2
[lantiq] clean up generic image building
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 17:49:42 +00:00
266c70cdf4
[kernel] bump to 3.3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 06:57:51 +00:00
1a03c75de1
uboot-envtools: update to 2012.04.01
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-04 21:55:49 +00:00
8cf477bc73
[lantiq] adds unset Kbuild symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 14:03:32 +00:00
c7942cd68f
[kernel] adds patch to make Tantos (psb6970) switch buildable again
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 17:41:28 +00:00
66fca35779
lantiq: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:21 +00:00
c9b641b53d
[lantiq] move files-3.3 -> files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:13:02 +00:00
78bf2cbd71
[lantiq] 3.2 R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:12:59 +00:00
7ee1e4f822
[lantiq] dgn3500 support with eeprom loading from sysfs
...
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules. I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.
SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.
Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.
Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:22 +00:00
f2dfa4d3a4
[lantiq] fixes zyxel p2601hnfx
...
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:20 +00:00
9669f7a243
[lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:16 +00:00
e100214e23
kernel: update linux 3.3 to 3.3.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
192dbdd2f5
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
cb4c118e50
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
e6d50dae72
[lantiq] code style cleanup of the mach files
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
499d5b1ca6
[lantiq] adds zyxel p2601hnfx support
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
d92ae2699f
[lantiq] set 3.3.6 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
27cb15eccd
[lantiq] set 3.3.5 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
cc87185921
kernel: update linux 3.3 to 3.3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
5c60980c61
[lantiq] Add 3.3 config files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:24 +00:00
be7f324d5e
[lantiq] Add missing 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:21 +00:00
f18079cbc3
[lantiq] Drop 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:19 +00:00
3303e79b79
kernel: update linux 3.3 to 3.3.5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 20:11:43 +00:00
f20d1938b5
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:19:14 +00:00
465b2a024c
kernel: update linux 3.3 to 3.3.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30 08:38:11 +00:00
5520ed39bf
kernel: update linux 3.2 to 3.2.16
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:35 +00:00
22d856df2d
[lantiq] Adding wifi eeprom extract for ARV752DPW - Easybox 802
...
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 09:40:37 +00:00
ac435b7daf
[target/linux/lantiq] change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
...
The VLAN mapping on the ARV4520PW board is the following:
port on Router: | VLAN in software:
LAN 1 | 3
LAN 2 | 2
LAN 3 | 1
LAN 4 | 0
DSL | 4
So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 08:07:21 +00:00
7865291832
kernel: also update the targets to use 3.2.15
...
Thanks Gabor for spotting it.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 13:12:14 +00:00
afbf3d994e
kernel: update linux 3.3 to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 12:51:02 +00:00
23578461a9
kernel: update linux 3.2 to 3.2.15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 12:50:54 +00:00
b9f03a5a14
[lantiq] adds 3.3 patches and files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 12:31:48 +00:00
37a565ab65
[lantiq] update 3.2 patches
...
sync with lantiq kernel series
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 12:33:56 +00:00
fe073513d5
kernel: update linux 3.2 to 3.2.14
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:51 +00:00
b01dd0668d
[lantiq] add Easybox 802 - ARV752DPW
...
Implements the ARV752DPW architecture in mach-arv.c
Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05 20:03:21 +00:00
Felix Fietkau
John Crispin
Mirko Vogt
Gabor Juhos
Luka Perkov
Jonas Gorski