Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47963
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47964 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47892
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47895 3c298f89-4303-0410-b956-a3cf2f4a3e73
there was an incorrect usage of tx path helpers in the rx path causing the code to
run into endless sleep states
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47812 3c298f89-4303-0410-b956-a3cf2f4a3e73
This replaces old bcm53xx patch for scanning whole flash and makes
bcm47xxpart compatible with NAND.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r47800
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47803 3c298f89-4303-0410-b956-a3cf2f4a3e73
The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor
changes, it contains a newer revision of the QCA9533 SoC and the CPU clock
is significantly higher.
Backport of r47263
Signed-off-by: Matteo Valentini <matteo.valentini@wiman.me>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47788 3c298f89-4303-0410-b956-a3cf2f4a3e73
ath9k expects to get revision id 2 for the QCA9531 ver. 2 rev. 0. This
fixes the very low TX power on some devices like the TP-LINK
TL-WR841ND v10
As ath79_soc_rev is only used to get the revision number to ath9k on the
QCA9533, just set it to the expected value on the ver. 2.
Backport of r47262
Signed-off-by: Matteo Valentini <matteo.valentini@wiman.me>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47787 3c298f89-4303-0410-b956-a3cf2f4a3e73
In backport commit r47605 the LED was named wrongly in a userspace
script.
Also remove reference to undefined pinmux group "wdt rst" causing
logline
rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio"
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47773 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r47351
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47605 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also create .gz images if configured to do so.
This is equivalent, but different to what we have in trunk, as the image
creation has been rewritten there.
Signed-off-by: Bruno Randolf <br1@einfach.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47604 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47388
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47390 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47373
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47374 3c298f89-4303-0410-b956-a3cf2f4a3e73
this unbreaks glibc builds
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47266
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47268 3c298f89-4303-0410-b956-a3cf2f4a3e73
Antminers using the stock bootloader will not hash without this GPIO set.
Applies to DD and CC
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r47261
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47267 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch is adding the missing board detection of WIZnet WizFi630A board.
ramips.sh was not submitted with the former patch.
This belongs to to the backport of patch r46921
Signed-off-by: Tobias Welz <tw@wiznet.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47243 3c298f89-4303-0410-b956-a3cf2f4a3e73
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.
Other corrections such as the Machine Name and HWIDs
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47242 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47238
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47239 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch supersedes the v1 from September 17th.
Bumping the patch version - the MiniBox profile showed up under M, but
since it's called 'Gainstrong MiniBox v1.0' now it looks out of place.
Renamed the profile to gs-minibox-v1.mk to fix that.
The following patch adds support for the Gainstrong MiniBox to 15.05
Chaos Calmer.
Fixed items:
- Inverted LED polarity (OOLITE seems to suffer from the same problem).
- Changed uppercase MINIBOX_V1_ prefix as requested.
- Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor).
- Mention the vendor (Gainstrong) in code headers.
Compiles fine, has been confirmed working by owners.
Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c,
the MiniBox images build fine without, so I'm wondering: do I need to add
it in there as well? Any added benefit?
Thank you
Signed-off by: Stijn Segers <francesco.borromini@inventati.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47235 3c298f89-4303-0410-b956-a3cf2f4a3e73
Support for WeIO board (http://we-io.net),
backported from Designated Driver trunk.
Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com>
Backport of r47110
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47232 3c298f89-4303-0410-b956-a3cf2f4a3e73
add the alsa driver from the latest RTSDK
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47205
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47230 3c298f89-4303-0410-b956-a3cf2f4a3e73
When talking to an atmel controller we need 9600 or 250000 baud.
as 250000 does not exist we use 2500000.
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47204
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47228 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47203
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47227 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47203
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47226 3c298f89-4303-0410-b956-a3cf2f4a3e73
This contains only the fixes from the 4.3-rc4 kernel.
Additional improvements are going into 4.4 which will fix and enable
hardware checksum/TSO offload, but backporting those to older kernels
is non-trivial.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47195 3c298f89-4303-0410-b956-a3cf2f4a3e73
to avoid editing the dts every time the kernel size changes.
uImage is now bigger than 1MB. Pad uImage to 64k erase block size.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
Backport of r46648
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47194 3c298f89-4303-0410-b956-a3cf2f4a3e73
Switch to generich chip irqs/irq domains.
Interrupts were broken since kernel 3.14. dLAN USB extender is now
booting again.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
Backport of r46647
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47193 3c298f89-4303-0410-b956-a3cf2f4a3e73
Switch to new 8250 debug uart code because the old
mach-mcs814x/include/mach/debug-macro.S tries to include
asm/hardware/debug-8250.S which no longer exists since kernel 3.14
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
Backport of r46646
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47192 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46248.
Signed-off-by: Jaehoon You <teslamint@gmail.com>
rebased on r46767.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47191 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r47164.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47165 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46474
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47101 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47076
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47100 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47074
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47099 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46475
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47098 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47073
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47097 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46659
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47096 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46959
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47095 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46958
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47094 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46957
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47093 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46956
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47092 3c298f89-4303-0410-b956-a3cf2f4a3e73
Felix Fietkau
John Crispin
Rafał Miłecki
Jo-Philipp Wich
Hauke Mehrtens
Imre Kaloz