40e58ce1c3
ar71xx: automatically find WLAN calibration data on TEW-673GRU
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:40 +00:00
020a46d895
ar71xx: automatically find WLAN calibration data on DIR-825-B1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:38 +00:00
2fce460e3b
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 18:45:56 +00:00
d5c1c3c4f3
ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:55 +00:00
821819c0fd
ar71xx: ar934x_nfc: increase DMA retry count
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:54 +00:00
9ffbc4ff02
ar71xx: ar934x_nfc: optimize READOOB operation on large page devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:53 +00:00
375b85687f
ar71xx: ar934x_nfc: fix RNDOUT operation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:51 +00:00
b31a6ffbb7
ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:50 +00:00
76e3187aa2
ar71xx: register the NAND controller device on the RB2011
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:26 +00:00
30da844351
ar71xx: add device registration code for the AR934x NAND flash controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:25 +00:00
83d96d137b
ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:22 +00:00
cb49889809
ar71xx: add initial support for RB2011UAS-2HnD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:32 +00:00
0ea5d33e08
ar71xx: use routerboot_find_tag to find wlan data offset on RB751
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:30 +00:00
2a30d5c072
ar71xx: add RouterBoot related helper routines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:28 +00:00
d90a416bf5
ar71xx: define MTD partitions for RB2011
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:24 +00:00
9b0f8cd250
ar71xx: add preliminary support for Mikrotik RB2011L
...
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:22 +00:00
26e1a6b953
ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:20 +00:00
773fa9a77f
ar71xx: add dynamic MDIO clock calculation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:17 +00:00
46d2e6a5b9
ar71xx: use the RLE library for RB751
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 17:51:56 +00:00
22fef4fdc7
Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
...
That was based on assumptions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:55 +00:00
bbf079b1d1
ar71xx: all0315n: fix ethernet according to vendor info
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:54 +00:00
baf5f4c4c9
ar71xx: Buffalo WZR-HP-AG300H LED support
...
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:11:55 +00:00
eedcda6a27
ar71xx: add support for the Allnet ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:31 +00:00
f4fbd75f87
ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:26 +00:00
8185640913
ar71xx: add support for the TRENDnet TEW-712BR board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 20:09:13 +00:00
4a272ceaea
ar71xx: fix comment style in mach-tl-wr2543n.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:42:59 +00:00
b7fd6b817f
ar71xx: add ALL0305 board alias
...
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33224 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:33:22 +00:00
0f8b30ebfb
ar71xx: add support for TP-Link TL-WDR3600
...
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:43:18 +00:00
38daca0070
add led defintion for the WR2543 5GHz WLAN LED
...
Signed-off-by: Andy Leiserson <andy@leiserson.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:10:24 +00:00
18315094a0
ar71xx: init switch hw_reset on the TL-WR1043ND board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:28 +00:00
4790652498
ar71xx: ew-dorin: added router firmware generation
...
[juhosg: remove dead code]
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:57 +00:00
dce7a40da2
ar71xx: Buffalo WLAE-AG300N initial support
...
The patch set for Buffalo WLAE-AG300N initial support.
There is another patch for wireless led support that
is posted separately.
Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.
[juhosg: fix coding style]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:52 +00:00
cdd38c0a64
ar71xx: make 2.4GHz wlan LED work on the WR2543N
...
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 16:25:26 +00:00
bb0fdf5209
ar71xx: add support for the OpenMesh OM2P-LC board
...
Patch-by: Marek Linder <marek@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:53 +00:00
85fc3d402c
ar71xx: add initial support for the QCA955X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:47 +00:00
a2954f12fb
ar71xx: improve MDIO busy wait code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 15:24:02 +00:00
7e8616d85a
ar71xx: remove the built-in MTD map of the ALL0258N
...
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 15:24:01 +00:00
b02b34668c
ar71xx: add support for the TL-WDR4300 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:17 +00:00
dd8a1c622f
ar71xx: remove superfluous include of asm/mach-ath79/pci.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:43 +00:00
224efc1850
ar71xx: add a common function to configure USB power GPIOs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:41 +00:00
dacb6839c0
ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 00:22:04 +00:00
df713331bf
ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13 12:54:22 +00:00
d591d58ff7
ar71xx: fix PHY setup on TL-MR3020 ( fixes #11572 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:12 +00:00
02b7e81b78
ar71xx: add a helper function for setting up PHY4 swapping on ar933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:09 +00:00
7bf6009fe6
ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 20:39:50 +00:00
55e7bd410c
ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 02:55:59 +00:00
026245749a
ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:41 +00:00
3412f35035
ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
...
Patch by Kamil Trzciński <ayufan@osk-net.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
f47ed77684
ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
f20d1938b5
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:19:14 +00:00
b373fefee9
ar71xx: add support for the TP-Link TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:35 +00:00
01bea635cb
ar71xx: allow to disable link polling on unused PHYs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:24 +00:00
7a2e03f5e3
ar71xx: enable MIB counters in the built-in switch of the AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 13:02:11 +00:00
fb5930b034
ar71xx: use ap91_pci_init for RB751{,G}
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:48 +00:00
00d3105923
ar71xx: move USB device registration directly into rb751{,g}_setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:43 +00:00
83531b059e
ar71xx: add ap9x_pci_get_wmac_data helper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:42 +00:00
7ad3da40d6
ar71xx: add sanity checks to decode_rle
...
Also use -EINVAL instead of -1.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:40 +00:00
ff6417252a
ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
...
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.
To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router
Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:07 +00:00
25cb8f3f4f
ar71xx: boost SPI flash read performance
...
mtd_speedtest results:
page read speed
old new delta
DB120 929 KiB/s 2597 KiB/s +179.55%
TL-WR1043ND v1 754 KiB/s 2166 KiB/s +187.27%
TL-WR703N v1 745 KiB/s 2176 KiB/s +192.08%
TL-MR3220 v1 752 KiB/s 2154 KiB/s +186.44%
TL-WR2543ND v1 564 KiB/s 2130 KiB/s +277.66%
TL-WR741ND v2 525 KiB/s 1767 KiB/s +236.57%
ALFA-AP96 702 KiB/s 1977 KiB/s +181.62%
WNDR3700 697 KiB/s 1965 KiB/s +181.92%
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:17 +00:00
bc6cbb5644
ar71xx: remove the built-in MTD map of the AP96 board
...
Pass the mtd_layout via the kernel command line instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:07 +00:00
35c72f864e
ar71xx: remove the built-in MTD map of the PB92 board
...
Pass the mtd_layout via the kernel command line instead
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:05 +00:00
1f4578115c
ar71xx: remove the built-in MTD map of the Zcomax devices
...
Pass the mtd_layout via the kernel command line instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:04 +00:00
ba06bbe662
ar71xx: remove the built-in MTD maps of several boards
...
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:
* AP113
* ALFA N2/N5
* DIR-600
* DIR-615
* DIR-825
* TEW-6{3,5}2BRP
* TEW-673GRU
* WHR-G301N
* WHR-HP-GN
* WHR-HP-G300N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:01 +00:00
c80db28b91
ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:51 +00:00
935d0cf7fe
ar71xx: add initial support for RB750GL
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:04 +00:00
fcb6507f7b
ar71xx: make rb750_latch_change 'static void'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:03 +00:00
dbf4111ad7
ar71xx: add latch_change field to rb750_led_platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:01 +00:00
c0a33c12b0
ar71xx: add platform data for the RB750 NAND driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:56:59 +00:00
c6fb886b40
ar71xx: add AR934x specific interface speed setup for ge0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:20 +00:00
b1fb73bd2f
ar71xx: add support for the jjPlus JA76PF2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:34 +00:00
a9e99d72ea
ar71xx: change LED name prefix on the jjplus boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:26 +00:00
6189648864
ar71xx: move micrel PHY driver to the generic linux target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 09:25:53 +00:00
8e0414c16a
ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:38 +00:00
90579991ee
ar71xx: ag71xx: start aneg on switch PHYs after reset
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:37 +00:00
16cf112d8c
ar71xx: ag71xx: poll PHY status of all available switch ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:36 +00:00
4e4e7aeec4
ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:34 +00:00
011e043746
ar71xx: reset the switch on AR934x before ethernet device registration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:33 +00:00
068199dde5
ar71xx: use a dummy callback for interfaces with fixed speed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 20:38:58 +00:00
caae34337e
ar71xx: merge ar934x_bo_ddr_flush patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 20:38:57 +00:00
b8d4f21691
ar71xx: fix WPS button polarity on TL-WR2543N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 19:50:53 +00:00
b079387bc5
ar71xx: ag71xx: fix get_port_link callback
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:35 +00:00
8040107a9c
ar71xx: ag71xx: use the generic get_port_link implementation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:34 +00:00
f265cbac9e
ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-01 19:49:05 +00:00
cca831fa63
ar71xx: ag71xx: add BQL support
...
It will be usable only from linux-3.3.
Based on a patch by Dave Taht <dave.taht@bufferbloat.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 14:56:47 +00:00
1b97bcd3dc
ar71xx: add preliminary support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 11:53:56 +00:00
07c8ccf163
ar71xx: merge 3.2 fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:33 +00:00
0b6aaa98af
ar71xx: merge files-3.2 to files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:31 +00:00
f9e8748d57
ar71xx: use dynamically allocated partitions in wrt160nl_part
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:36:51 +00:00
2899e54bd7
ar71xx: move arch specific files to files-2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:38:11 +00:00
5a804a0710
ar71xx: wrt160nl_part: include module.h and fix compiler warnings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 17:55:38 +00:00
77681dfda2
ar71xx: tplinkpart: include module.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 17:55:36 +00:00
69c5ec5805
ar71xx: rename vsc7385 spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:57 +00:00
57182d0623
ar71xx: rename ap81 spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:56 +00:00
9c5fd0809f
ar71xx: rename rb4xx spi drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:54 +00:00
99e5d01717
ar71xx: rename the nxp_74hc153 driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:52 +00:00
c72cb530b3
ar71xx: change board id of the UniFi board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:50 +00:00
0ddf352708
ar71xx: include linux/module.h in the micrel phy driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:49 +00:00
cb544f1fd3
ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 18:00:50 +00:00
c7cf50257f
ar71xx: pb44_spi: add shutdown handler
...
This allows to access the flash from a kexec'd kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:18 +00:00
d4f8c16d01
ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:17 +00:00
a1de404466
ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:15 +00:00
aeeb859e58
ar71xx: ar71xx_spi: add shutdown handler
...
This allows to access the flash from a kexec'd kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:14 +00:00
ad96a5a37b
ar71xx: ar71xx_spi: save and restore regs from probe/remove
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:13 +00:00
55412d0e9e
ar71xx: ar71xx_wdt: add shutdown handler
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:11 +00:00
8782a469c8
ar71xx: add initial support for the TL-WR2543N/ND board
...
The WLAN LEDs are not working yet.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:35 +00:00
c64226d2ad
ar71xx: local mac support on the wndr3700
...
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.
This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.
Patch-by: Dave Taht <dave.taht@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 17:24:44 +00:00
a128548072
ar71xx: add support for Redwave RW2458N
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:59 +00:00
881581493f
ar71xx: fix sections mismatch warnings in the nand drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05 18:08:33 +00:00
2d696ce97e
ar71xx: add inital support for the ALFA Network AP96 board
...
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:54 +00:00
3eeb7b7a5b
ar71xx: allow to use the command line hack on compex devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:58 +00:00
97682e0944
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
...
These models are based on the AP99 reference board,
and uses the AR7241 SoC.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:57 +00:00
bf40a234de
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:50 +00:00
2526c08008
ar71xx: add support for TP-Link TL-MR3020
...
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.
I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
USB is working and has been tested with USB mass storage and USB UMTS
stick.
Wifi also seems to work.
Ethernet is working too.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
674aa34176
ar71xx: add support for the ALFA Network N2/N5 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:25 +00:00
859e59397b
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:46 +00:00
9bf3904856
ar71xx: ag71xx: implement get_port_{link,stats} callbacks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:26 +00:00
be7cbae844
ar71xx: fix LEDs on the WRT400N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 13:54:11 +00:00
5f97cea3f0
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22 05:43:53 +00:00
26415b5f86
[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id ( #10649 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 01:27:48 +00:00
7e96983fe1
ar71xx: add missing wireless led changes for wzr-hp-g300nh2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 09:04:15 +00:00
b809bbc100
ar71xx: add support for the wzr-hp-g300nh2
...
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:20:17 +00:00
e5d5ffcbc2
ar71xx: connect GMAC0 to the internal switch on DB120
...
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:38 +00:00
10a219ed66
ar71xx: add defines for the AR934X GMAC interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:36 +00:00
2b1b2e492f
ar71xx: fix GMAC1 interface speed on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:35 +00:00
56a02cffed
ar71xx: ag71xx: fix switch port setup for AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:32 +00:00
5039a01b61
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:30 +00:00
59e650a276
ar71xx: ag71xx: setup switch interface mode on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:29 +00:00
3f45ffd8f2
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:28 +00:00
01036f2eae
ar71xx: allow to attach the internal switch for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:22 +00:00
691b20bcaf
ar71xx: introduce ar71xx_switch_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:11 +00:00
c0f856759b
ar71xx: tplinkpart: allow to detect JFFS2 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:40 +00:00
bc40f1dc75
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:23 +00:00
b480583892
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:21 +00:00
58bcc09552
ar71xx: ag71xx: nuke ar7240sw_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:20 +00:00
c1ff55ab84
ar71xx: fix mac addresses on jjPlus devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:18 +00:00
1b89ef9b2c
ar71xx: add support for ALFA Network's Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:10 +00:00
9d5225b963
ar71xx: add GPIO function bit defines for AR933X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:07 +00:00
df79552a2b
ar71xx: fix gpio count for ar7241/ar7242
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:47:24 +00:00
f3906a190c
ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:21:42 +00:00
af9ac63fda
kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 15:14:59 +00:00
f5ed3d653f
ar71xx: fix wireless led on wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 15:00:43 +00:00
2329eaffac
ar71xx: enable AR9341 support at setup.c
...
Patch-by: dyq <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:43 +00:00
041a6265f8
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
...
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:40 +00:00
9db5641019
ar71xx: add gpios and usb for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 13:33:44 +00:00
c9fcfa6fba
ar71xx: use RedBoot parser on PB44
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-11 15:52:47 +00:00
10ebaf63a7
ar71xx: use correct mac on the lan interface on several TP-LINK devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:10:58 +00:00
9501b2cf37
ar71xx: allow to pass negative offset values for ar71xx_init_mac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:10:55 +00:00
8caa31435f
ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 18:21:15 +00:00
bb48c3c03e
ar71xx: check squashfs signature in TP-Link mtd parser
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:33 +00:00
037fc54211
ar71xx: add preliminary support for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:51 +00:00
0eb86d9380
ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:44 +00:00
a86d2fb99b
ar71xx: rewrite WNDR3700/3800 handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 13:03:54 +00:00
e4bdc2f753
ar71xx: use the tp-link parser on the tp-link boards
...
Also remove static partition maps.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:31 +00:00
dc7ac75841
ar71xx: add mtd partition parser for the TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:27 +00:00
f91daa7486
ar71xx: run the RedBoot parser only on the RedBoot based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:25 +00:00
c4126790b7
ar71xx: run the MyLoader parser only on the WP543 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:23 +00:00
2216dd22b0
ar71xx: run the wrt160nl parser only on the WRT160NL board
...
Also remove static mtd partition definitions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:20 +00:00
897691c597
ar71xx: add support for Ubiquiti AirRouter
...
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:02 +00:00
dcab0017e4
ar71xx: modify phy mask of the WP543 board
...
This fixes ethernet on newer boards. Based on a patch from #9702 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:43 +00:00
dc19d51869
ar71xx: fix wndr3800 machine name
...
This fixes the machine name in /proc/cpuinfo and luci status page machine name.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:38 +00:00
4c134d64ea
ar71xx: set GE0 phy_mask for AR933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-20 11:30:10 +00:00
0ec8a8b387
ar71xx: fix USB LED on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:15 +00:00
a8b9399527
ar71xx: add a function for selecting output signal on a given GPIO pin
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:14 +00:00
cee3153f01
ar71xx: fix GPIO function handling on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:13 +00:00
2db6e74505
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:11 +00:00
de3ee69258
ar71xx: merge nand scan patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:10 +00:00
1fdbb4fcbd
ar71xx: fix a compiler warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:47 +00:00
33c5c80fa5
ar71xx: fix GPIO count for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:45 +00:00
54d08f41c9
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:53 +00:00
546895e938
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:51 +00:00
a921ab0827
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:49 +00:00
ed73833a62
ar71xx: add an irq parameter for ar724x_pcibios_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:47 +00:00
6e87fe5dc5
ar71xx: remove hardwired interface parameters from mach-* files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:09 +00:00
6f6b552473
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:07 +00:00
75a8898840
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:05 +00:00
562bd7628c
ar71xx: enable has_gbit flag on AR724{0,1}
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 17:36:36 +00:00
81359fd675
ar71xx: fixup onboard PCIe chip registration on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:03 +00:00
23823d7a65
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:01 +00:00
8e7450e3c2
ar71xx: ag71xx: add support for getting switch port link status
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:04 +00:00
25722074a3
ar71xx: remove mii_ctrl resources of the ethernet devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:03 +00:00
0e2b6d0d25
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:01 +00:00
f0a3d94dff
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:00 +00:00
51b1d36e03
ar71xx: set MII interface speed from the set_speed callbacks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:59 +00:00
0839b18e6f
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
...
Also rename the corresponding callback functions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:57 +00:00
7e0c585208
ar71xx: ag71xx: remove MII interface setup code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:56 +00:00
b28f1d9516
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:54 +00:00
96e3c5d0b8
ar71xx: use the button for WPS control on the DB120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:20 +00:00
0b8f0e8e22
ar71xx: register the second ethernet interface on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:19 +00:00
547b567ada
ar71xx: implement SoC specific phy interface setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:18 +00:00
2d684997e3
ar71xx: move phy interface setup into a separate function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:16 +00:00
a680542669
ar71xx: register both MDIO bus on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:59 +00:00
aee435407b
ar71xx: add AR934X specific MDIO registration code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:56 +00:00
61471eaa03
ar71xx: add a secondary mdio bus
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:54 +00:00
008f0239fb
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:50 +00:00
cf263134a7
ar71xx: add an id argument to ar71xx_add_device_mdio
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:48 +00:00
ff698943a3
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:42 +00:00
c3d1b40766
ar71xx: add AR934x specific USB setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:20 +00:00
86beed68ca
ar71xx: register the first ethernet interface on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:18 +00:00
aa72cd1c08
ar71xx: allow to register ethernet interfaces for AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:17 +00:00
44a0cc9d1b
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:16 +00:00
4faf62a121
ar71xx: add AR934X specific bootstrap and reset register bits
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:15 +00:00
856b67cb13
ar71xx: fix GPIO direction setup for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:09 +00:00
4bafa258d8
ar71xx: fix AR934X clock frequency calculation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:08 +00:00
a31e4087d1
ar71xx: remove dead code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-08 00:33:20 +00:00
ebb2f0d93b
ar71xx: on ar7240, exclude ports from their own port vlan destination mask
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-08 00:33:15 +00:00
10c12741af
ar71xx: add support for the Buffalo WHR-HP-GN board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:10 +00:00
affce809d6
ar71xx: add support for the Buffalo WHR-G301N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:07 +00:00
9e10ecd5d2
ar71xx: fix WHR-HP-G300N MTD partitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:03 +00:00
8aedee89d2
ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 14:38:12 +00:00
18d762e403
ar71xx: add initial support for the TL-WR741ND v4 board
...
The ethernet port LEDs are not working yet.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:52 +00:00
a8f9979c55
ar71xx: add AR933X GMAC register defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:50 +00:00
2fdf9ce8cb
ar71xx: unify LED names on Planex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:47 +00:00
2c27f3365b
ar71xx: unify LED names on Buffalo boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:46 +00:00
f17abe1ff3
ar71xx: unify LED names on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:44 +00:00
ddc9918fc1
ar71xx: add initial support for the OpenMesh OM2P board
...
Based on a patch by Marek Lindner <marek@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 07:54:51 +00:00
8750c52ceb
ar71xx/all0258n: fix partition layout
...
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 07:54:47 +00:00
7344100219
ar71xx: Buffalo WHR-HP-G300N kernel support
...
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.
Known problem: iw phy phy0 info shows:
Coverage class: 0 (up to 0m)
Available Antennas: TX 0 RX 0
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:26 +00:00
5333794b36
ar71xx: add kernel support for the Allnet ALL0258N board
...
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:21 +00:00
b987bdd364
linux: ar71xx: add support for Mikrotik Routerboard RB493G
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11 23:05:16 +00:00
bf2012d91a
ag71xx: close a race between the phy state machine and link state
...
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.
Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-08 11:37:14 +00:00
dd728ca937
ar71xx: fix MAC addresses on the DIR-825-B1 board
...
Patch-by: Lukas Kuna
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23 19:56:39 +00:00
3e6c09cc01
ar71xx: add support for the TP-Link TL-WR703N v1 board
...
Based on a patch by dongyuqi <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:53 +00:00
6cc6fb3124
ar71xx: add AR933x specific USB setup function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:51 +00:00
8c46da4f79
ar71xx: add ar71xx_device_reset_rmw helper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:50 +00:00
9b9085c0e3
ar71xx: remove 'default [yn]' from machine Kconfig entries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:47 +00:00
bc30c97cd9
ar71xx: sort AR71XX_MACH_* entries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:45 +00:00
8d0d9487dc
ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-11 17:44:12 +00:00
70b83bb1ef
ar71xx: do not count normal interrupts as spurious ( fixes #10037 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-06 05:38:23 +00:00
952ae86062
ar71xx: fix ethernet PLL setting on ar7242
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-29 21:23:46 +00:00
56093f4fdb
ar71xx: add some code to detect DMA stuck conditions on ar7240
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-13 22:30:14 +00:00
02c8410ffd
ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-13 21:49:46 +00:00
c300dae78b
ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout ( fixes #9922 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-11 13:52:40 +00:00
d715b0851d
ar71xx: fix ethernet FIFO state corruption on ar7240
...
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689 , #9405
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 17:36:31 +00:00
8268bc95d1
ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop
...
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 17:36:27 +00:00
d04b90839d
ar71xx: fix MAC/MDIO reset mask handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 17:36:23 +00:00
8ac7c93036
ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
...
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 11:57:51 +00:00
db015a3673
ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24 14:40:35 +00:00
9e73b3969d
rtl8366: unify rtl8366s and rtl8366rb platform data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24 14:40:23 +00:00
4417ab46f2
ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 ( #9684 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27739 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24 08:02:20 +00:00
5ee62f2cf9
ar71xx: reinitialize global switch settings after reset on ar7240
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 14:39:47 +00:00
366b622fda
ar71xx: configure address aging on ar7240
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 14:39:42 +00:00
5ce15fed68
ar71xx: reset the phy in the ethernet init on ar724x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:34 +00:00
8b276baecf
ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:29 +00:00
1cd2aa24fb
ar71xx: increase the delay after the ethernet MAC reset
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:25 +00:00
46e19e0fbb
ar71xx: fix an unused variable warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:20 +00:00
cc059267c7
ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-09 06:30:13 +00:00
7e972c38f2
ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-09 06:29:46 +00:00
2e69406167
ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
...
The config option has been removed in 2.6.39.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-30 12:15:33 +00:00
5af777bdf1
ar71xx: merge 2.6.39 patches
...
Also remove the old UART driver for ar933x.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:37 +00:00
f15a427a56
ar71xx: add 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:32 +00:00
Gabor Juhos
John Crispin
Felix Fietkau
Jo-Philipp Wich
Jonas Gorski