49fdd78bb1
mvebu: add a coherency fix which didn't make it to -stable, yet
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 13:52:21 +00:00
48705c7a15
mwlwifi: depend on TARGET_mvebu until it is fixed for non-OF platforms
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 13:17:46 +00:00
53ddd31f45
ralink: add default pinctrl node for mt7621 eval kit
...
fixes #19213
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 12:23:02 +00:00
4e105f4aea
ralink: mt7621 add ECHI OCHI XCHI support
...
The usb stroage not working since updated 3.18. Porting from MTK's source code.
Signed-off-by: wengbj <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:51 +00:00
0e2e675118
netifd: update to latest git HEAD
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:40 +00:00
5422bf412d
ralink: add FireWRT power button
...
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:36 +00:00
7e260b50f6
ralink: MT7621 add i2c controller driver
...
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:31 +00:00
d3d23a9f7b
kernel: add missing symbol
...
Signed-off-by: John Szakmeister <john@szakmeister.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:24 +00:00
0cce61e911
x86: add missing symbol to xen_domu
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:10 +00:00
29d9f6dc5c
toolchain: fix eglibc build when TOOLCHAINOPTS is not set
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:04 +00:00
d501aa20ff
cobalt: enable bridge
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:59 +00:00
4ac1d379b6
lua: fix eglibc reference
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:52 +00:00
438c19fc32
mdns: add jail and seccomp support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:44 +00:00
324ca9971e
dnsmasq: add jail support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:30 +00:00
beb93b24f7
procd: add jail support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:25 +00:00
5cbce8ae8b
base-files: add a init.d option that will start the syscall tracer
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:17 +00:00
36d9141412
base-files: create jail folder on boot
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:11 +00:00
2c93d1ab3d
kernel: extend seccomp with a LOG action
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:03 +00:00
3d898d1887
include: add a seccomp filter install wrapper
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:57:56 +00:00
15527f7f5a
kernel: cleanup seccomp symbol selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:57:51 +00:00
7238d37498
uclibc: add LD_PRELOAD support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:57:44 +00:00
b2188a6377
bcm53xx: use the correct kernel image
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:42:36 +00:00
b22936646d
drop 3.19 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 09:42:59 +00:00
90cd852f25
odhcp6c: various small fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 18:24:54 +00:00
99afb68ef8
ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:58:14 +00:00
a0f15a194b
ar71xx/image: add tplink device template for new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:58:10 +00:00
0b22d57e91
ar71xx/image: add Build/mktplinkfw as buildstep for new build code
...
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:58:05 +00:00
aac0c4d345
include/image.mk: define variable FILESYSTEM
...
Set it to the filesystem which is build. mktplinkfw need to know which filesystem
is used.
FILESYSTEM can be squashfs, jffs2-64k, ...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:58:00 +00:00
53aabb0a46
bcm53xx: convert to new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:57:44 +00:00
992c140f96
brcm63xx: use a lookup for bcmcia's ready gpio
...
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:37:38 +00:00
143ebec33f
brcm63xx: fix bcm96328avng board name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:26 +00:00
5e2e830a49
brcm63xx: fix bt v2500v dts based detection
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:15 +00:00
e6a628a95c
brcm63xx: move RTA770(B)W to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:12 +00:00
d8c4cc64ba
brcm63xx: move MAGIC to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:05 +00:00
d12962e510
brcm63xx: move CPVA502+ to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:57 +00:00
a83d3cc6b3
brcm63xx: move dg834g v4 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:43 +00:00
910fe9678c
brcm63xx: move dsl-2640u to dts
...
Also build image again(?).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:37 +00:00
a0c7ba2eae
brcm63xx: move bcm963268bu_p300 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:24 +00:00
0e09023c5f
brcm63xx: fix compilation on 3.14
...
Fixes the following issue:
drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:15 +00:00
5f59daeb04
brcm63xx: Add BT Home Hub 2A support.
...
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:12 +00:00
1e7bcd00a9
brcm63xx: move kernel load address to 8MiB
...
Fixes boot when uncompressed kernel is > 4 MiB (#19251 ).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:59 +00:00
ed7bef4f55
brcm63xx: hcsimage: respect load address
...
Respect the vmlinux load address when generating images.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:45 +00:00
3bc36b563e
brcm63xx: add Livebox 1 firmware image generation
...
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the bcm63xx images
builder makefile to generate the livebox 1 firmware.
I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.
Regards
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:40 +00:00
59c9cec787
brcm63xx: add a dummy image recipe for boards missing proper images
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:26 +00:00
2082201b9c
brcm63xx: drop non-dtb image recipe
...
All images generated contain dtbs, so it is now unused.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:23 +00:00
8db4079bb3
image.mk: allow image build code to run a per-filesystem prepare step
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 14:30:53 +00:00
e11b30a987
kernel: merge upstream bgmac driver improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 14:30:46 +00:00
a325d7259e
bcm53xx: enable the full-line-of-zero optimization in the cache controller
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 14:30:40 +00:00
360ae62034
toolchain/glibc: remove broken eglibc 2.15 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 14:29:23 +00:00
a97281ce19
toolchain: drop obsolete references to the coldfire target
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 14:29:17 +00:00
Imre Kaloz
Felix Fietkau
John Crispin
Steven Barth
Jonas Gorski