3fb91bbae4
hostapd: add support for specifying the maximum number of clients
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:56:56 +00:00
e1225a7328
hostapd: fix appending the iapp_interface variable to the config
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:56:49 +00:00
474f13fbc8
ar71xx: enable ar7240 switch support on the UBNT NanoStation M
...
Fixes broadcast frames on the second ethernet MAC
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:56:42 +00:00
cc2240d92f
hostapd: Add CONFIG_FULL_DYNAMIC_VLAN=y to hostapd-full.config
...
This allows hostapd to make use of the config option
"vlan_tagged_interface" to automatically create bridge and
VLAN interfaces in a fully dynamic way.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:48:38 +00:00
21adab3df5
hostapd: Allow rsn_preauth configuration
...
Hostapd can allow preauthentication for WPA2-EAP networks when
the interfaces through which preauthentication is allowed are
configured.
Add a new param "rsn_preauth=0/1" to the configuration that enables
or disables preauthentication on the according bridge interface.
Preauthentication for unbridged networks is not considered in this
patch.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:48:31 +00:00
a22fbebb05
e2fsprogs: add two compile fixes.
...
Thank you Joe Roback for reporting and fixing compiling on Darwin.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:43:45 +00:00
722e340ec1
[package] iptables: fix layer7 patch to place the source in extensions/, I doubt it ever worked
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:16:46 +00:00
a1ee34ca6e
ar71xx: fix micrel phy patch (Patch from #8041.)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 10:05:55 +00:00
ca27ca77f6
[include] autotools.mk: like libintl, make all libtool fixup packages depend on the libiconv stub
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 04:41:18 +00:00
db48122fb3
[include] autotools.mk: add a (dummy) libintl build dependency to any package using the libtool fixup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 02:37:56 +00:00
b1ea33a4f8
tools: fix dependencies
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 00:05:17 +00:00
fcc75bd8e7
[include] download.mk: support https:// downloads
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 21:43:10 +00:00
4ccce484c2
[scripts] download.pl: pass --no-check-certificate to wget
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 20:54:53 +00:00
24fdafc304
[tools] the mpfr dependencies accidentally got broken up, fix it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 19:59:04 +00:00
8f28f4bf39
e2fsprogs: update to version 1.41.13
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 19:47:11 +00:00
18a4a92b1c
tools: add missing dependencies
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 19:46:39 +00:00
53561f6994
cloog: libtools has to be run
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 19:34:55 +00:00
7aa038b3c1
ppl: go back to version 0.10.2
...
GCC 4.5 needs ppl in version 0.10.2. The patch makes it compile with gmp 5.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 19:34:04 +00:00
56a99126c9
[package] opkg: remove stray HOST_BUILD_DEPENDS
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 19:16:03 +00:00
feb97bc955
mac80211: another optimization for tx performance
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 18:27:51 +00:00
50b5fa5988
[include] autotools.mk: remove HOST_BUILD_DEPENDS on libtool
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 18:14:25 +00:00
44ca9c7aca
[package] libtool: remove patches, they don't apply to libltdl
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 18:13:12 +00:00
7039a63af5
[package] libtool: remove host build and leave only libltdl in place
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 18:12:34 +00:00
39140aae07
[tools] make libtool a tool build and let autoconf depend on it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 18:07:53 +00:00
c4f53cf832
mac80211: fix a crash in the tx path
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 17:56:32 +00:00
09c7dbd560
mac80211: fix a missing return value
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 17:40:09 +00:00
17d7790890
mac80211: significantly reduce the cpu load caused by excessive skb header cloning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 17:23:38 +00:00
589062b2d0
[include] autotools.mk: set AUTOPOINT to "true", not all hosts have it install and it makes autoreconf fail if not present, it also needs cvs which isn't installed on all hosts either
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 13:19:59 +00:00
bd2731afb9
ath9k: do not force the chainmask to 1 for legacy mode - it makes no sense and it reduces txpower and unnecessarily disables MRC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 02:14:52 +00:00
80d7bfbdd0
mac80211: update to wireless-testing 2010-12-16
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-18 02:00:10 +00:00
82e2bf1f16
firmware-utils/mkzynfw: fix available flash space calculation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 20:34:31 +00:00
6a95a13b12
generic: fix min/max confusion in jffs2_sum_init on 2.6.32
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 20:34:26 +00:00
88b208c92e
ar71xx: remove stray semicolons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:57:20 +00:00
58792f7715
ar71xx: fix WLAN LEDs on the DIR-825 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:21 +00:00
f6cb39e467
ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:19 +00:00
5c4c0790fe
ar71xx: use usbdev trigger for USB LEDs by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:16 +00:00
688facd0f8
base-files: add support for the usbdev LED trigger
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:14 +00:00
21a4f56bc6
generic: add LED trigger for USB device presence/activity
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:11 +00:00
4d67ce0092
generic: add usb_find_device_by_name helper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:08 +00:00
60c7563a0a
generic: nuke 2.6.33 specific stuff, is not used by any platform
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:04 +00:00
cfef002928
ar71xx: UBNT Secondary MAC address duplicate fix
...
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.
Signed-off-by: Kestutis Barkauskas<keba@devint.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:01 +00:00
091b041480
ar71xx: populate LED configuration for WZR-HP-G300NH
...
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>
[nand-disk trigger has been removed - juhosg]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:09:57 +00:00
d4fe3146b7
[tools] build flex on the host, some pakcages need it in the newest version
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 02:41:16 +00:00
ef37347914
ath9k: update initvals for ar9003
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 23:55:32 +00:00
26e6627a39
ath9k: remove code for setting up gpio based baseband rfkill - it was never used, nor configured properly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 23:55:23 +00:00
7044125cf1
ath9k: use the number of pending aggregates instead of the queue depth to determine when it is time to form the next A-MPDU
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 23:55:12 +00:00
a7b7ba5ace
brcm47xx: add ssb debug option.
...
This fixes a problem with wrt350n.
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"
Thank you sn9 for fixing this problem.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 19:35:59 +00:00
0436bd78c7
brcm47xx: add some missing pci ID for tg3 driver
...
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676
Thank you sn9 for fixing this problem.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 19:31:05 +00:00
502ee787f9
brcm47xx: this patch went upstream
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 19:26:55 +00:00
9bcddfb8d2
[packages] libtool: I don't know what crackhead thought that relinking with /usr/lib during cross compilation is a good idea, so just remove this crap.
...
It should solve a few instances of "/usr/lib/libc.a: could not read symbols: File format not recognized" when building stuff.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 14:00:07 +00:00
Felix Fietkau
Hauke Mehrtens
Jo-Philipp Wich
Gabor Juhos