Commit Graph

24920 Commits (37b69da0ca297e3f6dc61320cb1f88f3de348b34)

Author SHA1 Message Date
Luka Perkov 37b69da0ca cns3xxx: convert dwc_otg patches to files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:03:58 +00:00
Luka Perkov 80a28570bd cns3xxx: convert ethernet patches to files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:03:56 +00:00
Jonas Gorski 76d85346b0 bcm63xx: switch to 3.6.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:57:17 +00:00
Jonas Gorski 7367c272b8 kernel: modules: ext4 depends on crypto-hash on 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:42:35 +00:00
Imre Kaloz 202626daa1 [ixp4xx]: move fixed mapping of internal devices into vmalloc region
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:29:27 +00:00
Florian Fainelli ddf27142f4 [au1000] advertise squashfs feature
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:54 +00:00
Florian Fainelli 8a9badd8a3 [au1000] add support for Linux 3.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:50 +00:00
Florian Fainelli 1ff596e058 [au1000] split kernel config between generic, au1500 and au1550
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:44 +00:00
Florian Fainelli dbaa47e43b [ar7] add support for Linux 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34154 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 18:41:09 +00:00
Florian Fainelli 30b73257e7 [ar7] move files directory to files-3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 18:40:48 +00:00
Florian Fainelli cf559d0283 [package] i2c-gpio-mux: fix build for 3.6+ kernels
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 18:40:43 +00:00
Hauke Mehrtens c5f6531ab2 brcm47xx: remove ssb-gige package
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 17:30:33 +00:00
Florian Fainelli 697dd7d82f [ar7] generate image for AC49x
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:39 +00:00
Florian Fainelli 2e8c9209e9 [ar7] create AC49x subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:34 +00:00
Florian Fainelli ce15640628 [ar7] create generic subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:29 +00:00
Florian Fainelli b1482bba00 [ar7] detect AC49x flash partitions
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:22 +00:00
Florian Fainelli f8cd51f497 [ar7] support AC49x bootloader environment
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:14 +00:00
Florian Fainelli aafaeed5d5 [ar7] add AudioCodes AC49x platform support to kernel
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:09 +00:00
Florian Fainelli 575fa64966 [ar7] free memory below kernel offset
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:00 +00:00
Florian Fainelli 2b4803f28c [toolchain] uClibc: backport a fix for dlsym(RTLD_NEXT, ...) use
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:10:50 +00:00
Imre Kaloz 3cacce55ae [ixp4xx]: fix machtype handling above 4096
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 11:07:59 +00:00
Jo-Philipp Wich f0bff1a81a x86/generic: don't disable usbfs (#12452)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 23:28:58 +00:00
Jonas Gorski 851e20d9e4 bcm63xx: fix compilation with kmod-ohci enabled with 3.6
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 22:10:47 +00:00
Jonas Gorski d3d1f114b4 bcm63xx: add two missing usb patches to 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:16 +00:00
Jonas Gorski bf619e597c bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:07 +00:00
Felix Fietkau ac7d1d747a mac80211: add more tx skb free fixes (hopefully final fix to #11894)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 02:47:33 +00:00
Imre Kaloz 4c2e3be25a cns3xxx: clean up pcie patches
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 21:37:54 +00:00
John Crispin 5c300b9f41 [lantiq] add more profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:58 +00:00
John Crispin 3a08b05184 [lantiq] a few more dts files (WIP)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:43 +00:00
John Crispin c27f32609a [lantiq] add mtd split and atm patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:30 +00:00
Felix Fietkau 114523d5b7 x86: use $(strip) for the at_keyboard check
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:53:36 +00:00
Felix Fietkau ce5e0d1df8 x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:19:51 +00:00
Gabor Juhos 703033b343 generic: sanitize deps_initramfs list
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:

/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
make[5]: *** [usr] Error 2

Fix it by removing such filenames from the
deps_initramfs list.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 09:07:29 +00:00
Felix Fietkau c1aff23c3e build: remove remaining references to TOOLCHAIN_JOBS (thx, Sedat Dilek)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 15:08:31 +00:00
Luka Perkov 1a18927dcf cns3xxx: exit from laguna late_initcall if not running on laguna board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 11:31:56 +00:00
Jo-Philipp Wich 4e02c3b90a scripts: fix remote-gdb script to cope with _eabi suffix in uClibc version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 11:22:09 +00:00
Jo-Philipp Wich 18a6820243 resolveip: fix endless getopt() loop when compiled for arm (#12290)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 10:48:08 +00:00
Imre Kaloz 2a19fe9d2f cns3xxx: add PPS support for laguna
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support.  This patch adds kernel support (statically) and adds
the platform data in laguna board support.
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:42:31 +00:00
Imre Kaloz 72ece984b9 [cns3xxx]: fixup symbol selection
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:40:34 +00:00
Luka Perkov 7afe9fb306 cns3xxx: fix coding style in board script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 23:12:06 +00:00
John Crispin 12d41e1668 [ramips] adds fon20n profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:31 +00:00
John Crispin f06334f812 ramips: use kernel 3.6.6
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:21 +00:00
John Crispin 30627c7870 ramips: add HAVE_CLK to Kconfig on all ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:04 +00:00
John Crispin 532c332441 ramips: add linux-3.6 configuration for ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:55 +00:00
John Crispin 8b5e21cf9c ramips: port patches to linux-3.6
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:34 +00:00
John Crispin 4ca51f2e67 [kernel] Load schedule modules
They were missing the AUTOLOAD directive.

Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 19:36:56 +00:00
Jo-Philipp Wich ee76e2804a buildroot: isolate the .install stamp files for build variants (#12279)
This fixes missing embedded packages if multiple build variants are selected in
the build config, e.g. missing ppp if CONFIG_PACKAGE_ppp=y and
CONFIG_PACKAGE_ppp-multilink=m .

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 16:15:22 +00:00
Jonas Gorski 704a78d6b6 bcm63xx: Enable endian check support for ath9k pci fixup.
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 09:01:03 +00:00
Imre Kaloz f1302ff02d [ixp4xx]: fixup typos in the compex patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 07:51:24 +00:00
Jonas Gorski b8e5c3fb59 linux: export bcm963xx_tag.h to userspace
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 15:21:46 +00:00