Asus devices use TRX format with some extra data at the end.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45773 3c298f89-4303-0410-b956-a3cf2f4a3e73
Change the IB packaging to only embed libc, kernel and kmod packages by default
and generate repositories.conf to refer to the remote package repositories.
Introduce a new config option CONFIG_IB_STANDALONE which restores the old
behaviour of building self contained IB archives.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45772 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Rework hostapd and wpa_supplicant status parsing code
* Add support for querying available HT rates
* Relax definition of restricted channels
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45766 3c298f89-4303-0410-b956-a3cf2f4a3e73
When CONFIG_PER_FEED_REPO_ADD_DISABLED is set, trigger index creation for
any available feed, regardless of whether there where binaries built or not.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45765 3c298f89-4303-0410-b956-a3cf2f4a3e73
Use shared libipt{,4,6}ext.so libraries instead of statically linking
the userspace matches into the fw3 executable.
As a side effect the match initialization is extremely simplified
compared to the weak function pointer juggling performed before.
This also fixes the initialization of the multiport match.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45764 3c298f89-4303-0410-b956-a3cf2f4a3e73
Update kernel sources and refresh some patches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45761 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is required to allow packages to ship libraries with a different API.
Previously the linker would favor the old shared libraries in STAGING_DIR
instead of the just compiled ones in PKG_BUILD_DIR.
Avoid that problem by clearing the package staging files right after
prepare.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45759 3c298f89-4303-0410-b956-a3cf2f4a3e73
* drop unused lenient restore patch
* instead of statically linking core extensions, build shared libraries
for reuse in fw3
* strip outdated match revisions and aliases to trim down library size
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45758 3c298f89-4303-0410-b956-a3cf2f4a3e73
Patch to 2015-05-25 to fix ldso related regressions on PPC and MIPS.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45754 3c298f89-4303-0410-b956-a3cf2f4a3e73
Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.
This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45749 3c298f89-4303-0410-b956-a3cf2f4a3e73
This introduces a new config parameter "no-proto-task" useful for
xl2tpd.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45748 3c298f89-4303-0410-b956-a3cf2f4a3e73
Fix an upstream regression on 3.18+ that causes rt305x based devices
to hang on boot.
Fixes#19715.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45747 3c298f89-4303-0410-b956-a3cf2f4a3e73
Output warnings through stderr to allow them to be easilier spotted
when building with V=w.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45746 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix build failure when gdb is build after liblzma
* bump release number
Signed-off-by: Nicolas Thill <nico@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45745 3c298f89-4303-0410-b956-a3cf2f4a3e73
Hello,
if you run:
./scripts/feeds clean
It removes ./feeds folder but not ./package/feeds/ which is full of dangling links then. This patch fixes it.
Best Regards,
Martin Strbačka
Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45738 3c298f89-4303-0410-b956-a3cf2f4a3e73
Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean
Openwrt's top level Makefile uses STAGING_DIR_TOOLCHAIN in the make dirclean
statement.
https://dev.openwrt.org/browser/trunk/Makefile#L55
rm -rf $(STAGING_DIR) $(STAGING_DIR_HOST) $(STAGING_DIR_TOOLCHAIN)
$(TOOLCHAIN_DIR) $(BUILD_DIR_HOST) $(BUILD_DIR_TOOLCHAIN)
As far as I can determine, no such variable has been defined. I made a search
in Openwrt source repository and the one line in Makefile's dirclean command
is the only place where that variable exists.
The item has been introduced to Makefile by r8362, but even at that time
neither Makefile nor rules.mk defined such a variable. Most likely the goal
has been to set both staging_dir/toolchain and build_dir/toolchain to be
cleaned, but one of the variables has been erroneous. The correct variable
for build_dir/toolchain has been then added by r13494.
References:
https://dev.openwrt.org/changeset/8362/https://dev.openwrt.org/browser/trunk/Makefile?rev=8362https://dev.openwrt.org/browser/trunk/rules.mk?rev=8362https://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.htmlhttps://dev.openwrt.org/changeset/13494
In current code,
TOOLCHAIN_DIR = $(TOPDIR)/staging_dir/$(TOOLCHAIN_DIR_NAME)
BUILD_DIR_TOOLCHAIN = $(TOPDIR)/build_dir/$(TOOLCHAIN_DIR_NAME)
so the item STAGING_DIR_TOOLCHAIN in the rm command is unnecessary.
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45736 3c298f89-4303-0410-b956-a3cf2f4a3e73
modules relating to CONFIG_USB_AUDIO
Kernel <2.6.35 is not supported in trunk
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45734 3c298f89-4303-0410-b956-a3cf2f4a3e73
This change set enables frequency scaling on ipq806x, which speeds-up
the CPU and allows it to achieve its max frequency.
These patches are cherry-picked & backported from the following location:
*130-132: linux-next
*133-143: LKML - https://lkml.org/lkml/2015/3/21/15
*144: derived from other qcom similar dts
*145: derived from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/drivers/cpufreq/cpufreq-krait.c
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45730 3c298f89-4303-0410-b956-a3cf2f4a3e73
Jo-Philipp Wich
Felix Fietkau
Rafał Miłecki
Steven Barth
Imre Kaloz
Jonas Gorski
Nicolas Thill
John Crispin