0b4c80a1c4
uclibc: make powerpc e500 support independent of the target name, always use it if the spe_fpu feature flag is set
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-26 14:22:55 +00:00
08f272b049
[package] busybox: update to 1.18.5, patch from Peter Wagner
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 22:05:14 +00:00
7df7c99364
[x86] geos: deprecate uci-defaults files
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 22:05:10 +00:00
af4c306ce6
[x86] alix2: add config files for bridging
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 22:05:05 +00:00
ab79004895
mac80211: force b44 and atl* to be disabled, even if they are enabled in the kernel tree
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 19:31:12 +00:00
fa61065873
[brcm63xx] remove gpiodev, prefer sysfs gpio
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 19:26:17 +00:00
42b46dbbd5
ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 13:54:42 +00:00
1ce73d5bde
ar71xx: bring up secondary radio on wzr-hp-ag300h ( fixes #9608 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 13:48:47 +00:00
bc1ddab9e9
mac80211: configure HT IBSS through uci
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 19:53:31 +00:00
fedfa311c2
iw: add support for configuring HT IBSS
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 19:53:27 +00:00
9a1ca00d39
mac80211: add the work-in-progress IBSS HT patch, with some minor fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 19:53:22 +00:00
753d0657bb
ath9k: add some more pending fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 19:53:18 +00:00
2686ccd16d
mac80211: update to wireless-testing 2011-06-22
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 19:53:13 +00:00
fdc2c49a18
kernel: fix wrong line for the +@DRIVER_WEXT_SUPPORT dependency in kmod-net-zd1201
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 19:53:09 +00:00
b5fe1e014f
mac80211: enable cfg80211 debugfs support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 19:53:05 +00:00
3958942342
[kernel] add missing linux-3.0 config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 11:43:30 +00:00
70f62578d9
[scripts] metadata.pl: fix handling of multiple conditional depends that reference the same package (exposed by previous hotplug2 changes), also kill duplicate dependency specs while we're at it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23 19:28:16 +00:00
ad0af97fc1
[package] hotplug2: make libbsd depend on "not uclibc" for now, the conditional depdendency handling needs fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23 18:49:24 +00:00
5de173d634
[package/hotplug2] fix conditional dependencies to libbsd
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23 14:38:29 +00:00
83e981ca76
[toolchain/eglibc] manual/Makefile: Don't mix pattern rules with normal rules.
...
This change got committed into the official eglibc repository in commit 11461.
Thanks to Philip Prindeville for pointing this out.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23 14:38:26 +00:00
5945c8a227
[toolchain] add gfortran compiler support ( #9600 , patch from Xiangfu Liu via Qi hardware)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23 11:46:24 +00:00
481279fb32
[toolchain] introduce option to enable setjump()/longjump() based C++ exceptions ( #9185 , patch from David Kuehling via Qi hardware)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23 11:37:39 +00:00
d72a90ee7b
[brcm63xx] register SSB sprom after ethernet devices
...
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-22 12:32:03 +00:00
2bc81b5e4a
[include] cmake.mk: fix bogus values for FIND_ROOT_PATH_MODE_*; kept plplot from compiling ( #9573 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-22 11:02:00 +00:00
1f71cdebe0
firmware-utils: fix build on big endian systems
...
This closes #9446
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 21:13:58 +00:00
16a2b890cf
[brcm63xx] fix tab damage in 141-led_count.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:58 +00:00
a104f95d05
[kernel] fix and make usable kmod-pcmcia-rsrc
...
This module is also needed for e.g: kmod-bcm63xx-pcmcia
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:53 +00:00
7a30429b72
mac80211: use firmware from linux-firmware git
...
Use the firmware from linux-firmware git where possible.
Update some firmware files in that process and check for missing firmware files for some modules.
* update Ralink firmwares
* update ath9k_htc firmware
* add firmware for mwl8k
* add more firmware files for libertas-sd and libertas-usb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:50:10 +00:00
d5a7db6dc1
mac80211: fix debugfs for ath9k_htc
...
if debugfs was enabled ath9k_htc did not load.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:44:50 +00:00
f07e599bf1
mac80211: remove rests of ar9170 driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:43:50 +00:00
ef4775df74
kernel: refresh patches for kernel 3.0-rc4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 18:39:47 +00:00
46c6ee1ca7
[brcm63xx] use macros to generate SPI registers table and switches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 10:05:51 +00:00
b8fad49ff3
Revert "[toolchain/eglibc} eglibc in fact can be built with -Os"
...
Compiling with -Os results in: "error: #error "glibc cannot be compiled without optimization"
Still, building with -Os is listed as feature in
<http://www.eglibc.org/features >:
""
Building with -Os
EGLIBC supports building the library with compiler optimizing for size -Os instead of for speed -O2.
""
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-20 11:12:46 +00:00
aa3bc1d684
[PATCH] scripts/config/.gitignore omits source files
...
scripts/config/.gitignore aims to avoid checking binaries in to git.
Unfortunately it also omits conf.c, confdata.c, and all source files
in lxdialog. An OpenWRT tree pulled from a git repository will not
build, and I suspect this was not the intention.
Signed-off-by: Denton Gentry <denny@geekhold.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-20 10:41:02 +00:00
585c56bd1a
[adm5120] fix usb mis-cleanup after r27162 ( #9581 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-20 10:04:53 +00:00
c738aae911
[package] kernel: package more NIC drivers:
...
* SiS 190 Fast/Gigabit Ethernet support
* SysKonnect Yukon support
* Atheros L2 Fast Ethernet support
* Atheros L1 Gigabit Ethernet support
* Atheros L1C
* Atheros L1E
Patch by Lauri Võsandi<lauri.vosandi@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-20 09:41:03 +00:00
545cdca68e
[x86] Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 23:05:21 +00:00
6f3abd061e
[PATCH] generic: Remove IPv6 depependency of bridge in 2.6.38+
...
Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is
enabled. Since the IPv6 module isn't exactly lightweight and bridge also
only needs a single function from IPv6, it's rather easy to create a
common "lib" module with a RCU pointer to the actual implementation, if
the IPv6 module is loaded (although slightly hackish).
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 22:48:53 +00:00
d2e81efd80
[brcm63xx] dev-spi.c checks for running CPU, not board code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:46:00 +00:00
35faebfc51
[brcm63xx] fixup patches after r27234
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:28:38 +00:00
333e68fdfd
[brcm63xx] remove accidental bcm6345 related patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:16:59 +00:00
f41477ce57
[brcm63xx] remove support for 2.6.37 and 2.6.38
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:14:22 +00:00
0103e97008
[brcm63xx] switch to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:12:45 +00:00
c344ac7cbf
[ar7] cleanup empty directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:10:36 +00:00
d55db8855e
[cobalt] remove 2.6.35 and 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:09:40 +00:00
4a130bc193
[ep93xx] remove pre 2.6.39 patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:09:00 +00:00
a057bc3de3
[au1000] remove 2.6.37 patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:07:26 +00:00
b6cbcf42cb
[package] block-mount: remove explicit lock waits, solves some potential race conditions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 18:15:14 +00:00
191ba94ca2
ar71xx: cleanup AR933X UART driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 13:17:51 +00:00
3436ce6c87
ar71xx: fix uart clock frequency for AR933X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 13:17:50 +00:00
Felix Fietkau
Florian Fainelli
Jo-Philipp Wich
Mirko Vogt
Hauke Mehrtens
Gabor Juhos