Nicholas Smith 73e0f52b6e ramips: add support for Telco Electronics X1 ... Hardware: SoC: MT7621 DRAM: 256MB DDR3 Flash: 16MB SPI-NOR WiFi: 2.4GHz: MT7603 @ PCIe0 WiFi: 5.8GHz: MT7612 @ PCIe1 Modem: Sierra Wireless MC74xx Interfaces: GBE RJ45 x5 mPCIe x2 UART x1 I2C x1 JTAG x1 UIM x1 LEDs x6 Flash instructions: Flash from within the factory bootloader, firmware web interface or CLI using sysupgrade -F -n Signed-off-by: Nicholas Smith <mips171@icloud.com>		2019-05-18 17:59:49 +02:00
..
base-files	ramips: add support for Telco Electronics X1	2019-05-18 17:59:49 +02:00
dts	ramips: add support for Telco Electronics X1	2019-05-18 17:59:49 +02:00
files-4.14/drivers	ramips: implement vlan rx offload on MT7621	2019-04-03 10:40:09 +02:00
image	ramips: add support for Telco Electronics X1	2019-05-18 17:59:49 +02:00
mt76x8	ramips: enable R6120 USB power	2019-04-06 19:14:06 +02:00
mt7620	ramips: Add support for Head Weblink HDRM200	2019-05-17 21:41:43 +02:00
mt7621	ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE	2018-12-13 13:39:56 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.118	2019-05-13 19:17:41 +02:00
rt288x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
rt305x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
rt3883	ramips: rt3883: drop jimage support	2019-01-26 21:46:33 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00