mirror of https://github.com/hak5/openwrt.git
ramips: add support for Telco Electronics X1
Hardware: SoC: MT7621 DRAM: 256MB DDR3 Flash: 16MB SPI-NOR WiFi: 2.4GHz: MT7603 @ PCIe0 WiFi: 5.8GHz: MT7612 @ PCIe1 Modem: Sierra Wireless MC74xx Interfaces: GBE RJ45 x5 mPCIe x2 UART x1 I2C x1 JTAG x1 UIM x1 LEDs x6 Flash instructions: Flash from within the factory bootloader, firmware web interface or CLI using sysupgrade -F -n Signed-off-by: Nicholas Smith <mips171@icloud.com>openwrt-19.07
Nicholas Smith
Christian Lamparter
parent
f5d2c91415
commit
73e0f52b6e
|
|
@ -119,6 +119,7 @@ ramips_setup_interfaces()
|
|||
rt-n12p|\
|
||||
sap-g3200u3|\
|
||||
sk-wb8|\
|
||||
telco-electronics,x1|\
|
||||
unielec,u7621-06-256m-16m|\
|
||||
unielec,u7621-06-512m-64m|\
|
||||
vr500|\
|
||||
|
|
|
|||
|
|
@ -22,6 +22,9 @@ head-weblink,hdrm200)
|
|||
mikrotik,rb750gr3)
|
||||
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
|
||||
;;
|
||||
telco-electronics,x1)
|
||||
ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16"
|
||||
;;
|
||||
ubnt-erx)
|
||||
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,172 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "telco-electronics,x1", "mediatek,mt7621-soc";
|
||||
model = "Telco Electronics X1";
|
||||
|
||||
aliases {
|
||||
led-boot = &system_led;
|
||||
led-failsafe = &system_led;
|
||||
led-running = &system_led;
|
||||
led-upgrade = &system_led;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
system_led: system {
|
||||
label = "x1:green:system";
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_offline {
|
||||
label = "x1:red:modem-offline";
|
||||
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
modem_4g {
|
||||
label = "x1:blue:modem-4g";
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_3g {
|
||||
label = "x1:green:modem-3g";
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_rssi_lowest {
|
||||
label = "x1:green:modem-rssi-lowest";
|
||||
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_rssi_low {
|
||||
label = "x1:green:modem-rssi-low";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_rssi_medium {
|
||||
label = "x1:green:modem-rssi-medium";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_rssi_high {
|
||||
label = "x1:green:modem-rssi-high";
|
||||
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_rssi_highest {
|
||||
label = "x1:green:modem-rssi-highest";
|
||||
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <14000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bootloader";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware: partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe006>;
|
||||
mediatek,portmap = "llllw";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "jtag", "uart2", "wdt", "rgmii2";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "pci14c3,7603";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "pci14c3,7662";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
led {
|
||||
led-sources = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -435,6 +435,14 @@ define Device/sk-wb8
|
|||
endef
|
||||
TARGET_DEVICES += sk-wb8
|
||||
|
||||
define Device/telco-electronics_x1
|
||||
DTS := Telco-Electronics-X1
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_TITLE := Telco Electronics X1
|
||||
DEVICE_PACKAGES := kmod-usb3 kmod-mt76 wpad-basic
|
||||
endef
|
||||
TARGET_DEVICES += telco-electronics_x1
|
||||
|
||||
define Device/timecloud
|
||||
DTS := Timecloud
|
||||
DEVICE_TITLE := Thunder Timecloud
|
||||
|
|
|
|||
Loading…
Reference in New Issue