| .. |
|
b53
|
generic: b53: fix reverted error check in probe
|
2013-02-10 12:31:36 +00:00 |
|
adm6996.c
|
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
adm6996.h
|
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
ar8216.c
|
ar8216: remove superfluous code from ar8216_config_init
|
2013-02-11 16:57:31 +00:00 |
|
ar8216.h
|
generic: ar8216: add defines for the AR8316 POSTRIP register
|
2013-02-10 13:18:48 +00:00 |
|
ip17xx.c
|
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
|
2010-10-12 20:49:35 +00:00 |
|
micrel.c
|
ar71xx: move micrel PHY driver to the generic linux target
|
2012-03-15 09:25:53 +00:00 |
|
mvswitch.c
|
generic: mvswitch: add detach callback
|
2013-02-07 15:18:34 +00:00 |
|
mvswitch.h
|
rename target/linux/generic-2.6 to generic
|
2010-06-26 20:42:58 +00:00 |
|
psb6970.c
|
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
|
2010-10-12 20:49:35 +00:00 |
|
rtl8306.c
|
rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches (fixes #8911)
|
2011-04-02 16:35:22 +00:00 |
|
rtl8366_smi.c
|
generic: rtl8366_smi: only assign pvid if no pvid was set yet
|
2013-01-18 15:19:11 +00:00 |
|
rtl8366_smi.h
|
linux: generic: rtl836*: fix compilation with !CONFIG_OF
|
2012-12-15 13:32:02 +00:00 |
|
rtl8366rb.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
rtl8366s.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
rtl8367.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
rtl8367b.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
swconfig.c
|
swconfig: make it compatible with 3.7
|
2012-11-21 17:38:11 +00:00 |
|
swconfig_leds.c
|
generic: swconfig: use led_set_brightness in LED control code
|
2012-10-26 18:58:18 +00:00 |
9525a075c1