.. |
Kconfig
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
Makefile
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
ar71xx.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
dev-ap91-eth.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
dev-ap91-eth.h
|
ar71xx: allow overriding of the lan port names on AP91 based boards
|
2010-03-09 18:05:45 +00:00 |
dev-ap91-pci.c
|
ar71xx: update AR7240 PCI code
|
2009-12-20 13:46:23 +00:00 |
dev-ap91-pci.h
|
ar71xx: remove unnecessary includes
|
2009-12-25 13:09:00 +00:00 |
dev-ap94-pci.c
|
ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
|
2010-02-09 16:27:35 +00:00 |
dev-ap94-pci.h
|
ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
|
2010-02-09 16:27:35 +00:00 |
dev-ar913x-wmac.c
|
ar71xx: merge AR71XX_IRQ_CPU_{PCI,WMAC} into AR71XX_IRQ_CPU_IP2
|
2010-03-18 19:18:46 +00:00 |
dev-ar913x-wmac.h
|
ar71xx: pass eeprom and mac address location to the ar913x_add_device_wmac function
|
2009-12-27 20:59:50 +00:00 |
dev-dsa.c
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
dev-dsa.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
dev-gpio-buttons.c
|
ar71xx: move gpio-buttons support into a spearate file
|
2009-12-26 14:19:01 +00:00 |
dev-gpio-buttons.h
|
ar71xx: move gpio-buttons support into a spearate file
|
2009-12-26 14:19:01 +00:00 |
dev-leds-gpio.c
|
ar71xx: move leds-gpio device support into a spearate file
|
2009-12-26 14:18:54 +00:00 |
dev-leds-gpio.h
|
ar71xx: move leds-gpio device support into a spearate file
|
2009-12-26 14:18:54 +00:00 |
dev-m25p80.c
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
dev-m25p80.h
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
dev-pb9x-pci.c
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
dev-pb9x-pci.h
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
dev-pb42-pci.c
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
dev-pb42-pci.h
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
dev-usb.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
dev-usb.h
|
ar71xx: move USB host device support into a separate file
|
2009-12-26 14:19:13 +00:00 |
devices.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
devices.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
early_printk.c
|
move early_printk stuff into a separate file
|
2009-08-26 07:31:04 +00:00 |
gpio.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
irq.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
mach-ap81.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-ap83.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-aw-nr580.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-dir-600-a1.c
|
ar71xx: allow overriding of the lan port names on AP91 based boards
|
2010-03-09 18:05:45 +00:00 |
mach-dir-615-c1.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-dir-825-b1.c
|
rtl8366_smi: move RTL8366S driver into a separate file
|
2010-01-22 17:38:07 +00:00 |
mach-mzk-w04nu.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-mzk-w300nh.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-pb42.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-pb44.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-pb92.c
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
mach-rb4xx.c
|
ar71xx: use the RB411 setup for the RB411U
|
2010-03-21 18:16:24 +00:00 |
mach-rb750.c
|
ar71xx: override lan port names on the RB750
|
2010-03-09 18:05:48 +00:00 |
mach-tew-632brp.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-tl-wr741nd.c
|
ar71xx: allow overriding of the lan port names on AP91 based boards
|
2010-03-09 18:05:45 +00:00 |
mach-tl-wr841n.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-tl-wr941nd.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-tl-wr1043nd.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-ubnt.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-wndr3700.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-wnr2000.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-wp543.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
mach-wrt160nl.c
|
ar71xx: reduce button threshold values
|
2010-01-13 10:18:30 +00:00 |
mach-wrt400n.c
|
wrt400n: lan ports don't need the ar8216 workaround
|
2010-03-26 19:09:11 +00:00 |
mach-wzr-hp-g300nh.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
machtype.h
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
nvram.c
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
nvram.h
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
pci.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
prom.c
|
ar71xx: use COMMAND_LINE_SIZE
|
2010-03-02 13:36:04 +00:00 |
setup.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |