ar71xx: move gpio-buttons support into a spearate file

SVN-Revision: 18937
lede-17.01
Gabor Juhos 2009-12-26 14:19:01 +00:00
parent 3687b4fb26
commit c0993046d6
30 changed files with 137 additions and 74 deletions

View File

@ -6,6 +6,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
CONFIG_AR71XX_DEV_AP91_PCI=y
CONFIG_AR71XX_DEV_AP94_PCI=y
CONFIG_AR71XX_DEV_AR913X_WMAC=y
CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
CONFIG_AR71XX_DEV_LEDS_GPIO=y
CONFIG_AR71XX_DEV_M25P80=y
CONFIG_AR71XX_DEV_PB42_PCI=y

View File

@ -8,6 +8,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
CONFIG_AR71XX_DEV_AP91_PCI=y
CONFIG_AR71XX_DEV_AP94_PCI=y
CONFIG_AR71XX_DEV_AR913X_WMAC=y
CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
CONFIG_AR71XX_DEV_LEDS_GPIO=y
CONFIG_AR71XX_DEV_M25P80=y
CONFIG_AR71XX_DEV_PB42_PCI=y

View File

@ -8,6 +8,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
CONFIG_AR71XX_DEV_AP91_PCI=y
CONFIG_AR71XX_DEV_AP94_PCI=y
CONFIG_AR71XX_DEV_AR913X_WMAC=y
CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
CONFIG_AR71XX_DEV_LEDS_GPIO=y
CONFIG_AR71XX_DEV_M25P80=y
CONFIG_AR71XX_DEV_PB42_PCI=y

View File

@ -6,12 +6,14 @@ config AR71XX_MACH_AP81
bool "Atheros AP81 board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
config AR71XX_MACH_AP83
bool "Atheros AP83 board support"
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -19,6 +21,7 @@ config AR71XX_MACH_DIR_615_C1
bool "D-Link DIR-615 rev. C1 support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -26,17 +29,20 @@ config AR71XX_MACH_DIR_825_B1
bool "D-Link DIR-825 rev. B1 board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AP94_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
config AR71XX_MACH_PB42
bool "Atheros PB42 board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_PB42_PCI if PCI
default y
config AR71XX_MACH_PB44
bool "Atheros PB44 board support"
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_PB42_PCI if PCI
select AR71XX_DEV_LEDS_GPIO
default y
@ -44,6 +50,7 @@ config AR71XX_MACH_PB44
config AR71XX_MACH_AW_NR580
bool "AzureWave AW-NR580 board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_PB42_PCI if PCI
select AR71XX_DEV_LEDS_GPIO
default y
@ -56,6 +63,7 @@ config AR71XX_MACH_WP543
bool "Compex WP543/WPJ543 board support"
select MYLOADER
select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_PB42_PCI if PCI
select AR71XX_DEV_LEDS_GPIO
default y
@ -64,17 +72,20 @@ config AR71XX_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
config AR71XX_MACH_WRT400N
bool "Linksys WRT400N board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
config AR71XX_MACH_RB_4XX
bool "MikroTik RouterBOARD 4xx series support"
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -82,6 +93,7 @@ config AR71XX_MACH_WNDR3700
bool "NETGEAR WNDR3700 board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AP94_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -89,6 +101,7 @@ config AR71XX_MACH_WNR2000
bool "NETGEAR WNR2000 board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -96,6 +109,7 @@ config AR71XX_MACH_MZK_W04NU
bool "Planex MZK-W04NU board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -103,6 +117,7 @@ config AR71XX_MACH_MZK_W300NH
bool "Planex MZK-W300NH board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -110,6 +125,7 @@ config AR71XX_MACH_TL_WR741ND
bool "TP-LINK TL-WR741ND support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -117,6 +133,7 @@ config AR71XX_MACH_TL_WR841N_V1
bool "TP-LINK TL-WR841N v1 support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_PB42_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -124,6 +141,7 @@ config AR71XX_MACH_TL_WR941ND
bool "TP-LINK TL-WR941ND support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -131,6 +149,7 @@ config AR71XX_MACH_TL_WR1043ND
bool "TP-LINK TL-WR1043ND support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -138,6 +157,7 @@ config AR71XX_MACH_TEW_632BRP
bool "TRENDnet TEW-632BRP support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default y
@ -145,6 +165,7 @@ config AR71XX_MACH_UBNT
bool "Ubiquiti AR71xx based boards support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_PB42_PCI if PCI
default y
@ -163,6 +184,9 @@ config AR71XX_DEV_AP94_PCI
config AR71XX_DEV_AR913X_WMAC
def_bool n
config AR71XX_DEV_GPIO_BUTTONS
def_bool n
config AR71XX_DEV_LEDS_GPIO
def_bool n

View File

@ -16,6 +16,7 @@ obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o
obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o
obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC) += dev-ar913x-wmac.o
obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o
obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o

View File

@ -0,0 +1,58 @@
/*
* Atheros AR71xx GPIO button support
*
* Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "linux/init.h"
#include <linux/platform_device.h>
#include "dev-gpio-buttons.h"
void __init ar71xx_add_device_gpio_buttons(int id,
unsigned poll_interval,
unsigned nbuttons,
struct gpio_button *buttons)
{
struct platform_device *pdev;
struct gpio_buttons_platform_data pdata;
struct gpio_button *p;
int err;
p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
if (!p)
return;
memcpy(p, buttons, nbuttons * sizeof(*p));
pdev = platform_device_alloc("gpio-buttons", id);
if (!pdev)
goto err_free_buttons;
memset(&pdata, 0, sizeof(pdata));
pdata.poll_interval = poll_interval;
pdata.nbuttons = nbuttons;
pdata.buttons = p;
err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
if (err)
goto err_put_pdev;
err = platform_device_add(pdev);
if (err)
goto err_put_pdev;
return;
err_put_pdev:
platform_device_put(pdev);
err_free_buttons:
kfree(p);
}

View File

@ -0,0 +1,25 @@
/*
* Atheros AR71xx GPIO button support
*
* Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef _AR71XX_DEV_GPIO_BUTTONS_H
#define _AR71XX_DEV_GPIO_BUTTONS_H
#include <linux/input.h>
#include <linux/gpio_buttons.h>
#include <asm/mach-ar71xx/platform.h>
void ar71xx_add_device_gpio_buttons(int id,
unsigned poll_interval,
unsigned nbuttons,
struct gpio_button *buttons) __init;
#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */

View File

@ -665,49 +665,6 @@ void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
platform_device_register(&ar71xx_spi_device);
}
void __init ar71xx_add_device_gpio_buttons(int id,
unsigned poll_interval,
unsigned nbuttons,
struct gpio_button *buttons)
{
struct platform_device *pdev;
struct gpio_buttons_platform_data pdata;
struct gpio_button *p;
int err;
p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
if (!p)
return;
memcpy(p, buttons, nbuttons * sizeof(*p));
pdev = platform_device_alloc("gpio-buttons", id);
if (!pdev)
goto err_free_buttons;
memset(&pdata, 0, sizeof(pdata));
pdata.poll_interval = poll_interval;
pdata.nbuttons = nbuttons;
pdata.buttons = p;
err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
if (err)
goto err_put_pdev;
err = platform_device_add(pdev);
if (err)
goto err_put_pdev;
return;
err_put_pdev:
platform_device_put(pdev);
err_free_buttons:
kfree(p);
}
void __init ar71xx_add_device_wdt(void)
{
platform_device_register_simple("ar71xx-wdt", -1, NULL, 0);

View File

@ -14,7 +14,6 @@
#include <asm/mach-ar71xx/platform.h>
#include <linux/gpio_buttons.h>
#include <net/dsa.h>
void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
@ -39,11 +38,6 @@ void ar71xx_add_device_eth(unsigned int id) __init;
void ar71xx_add_device_mdio(u32 phy_mask) __init;
void ar71xx_add_device_gpio_buttons(int id,
unsigned poll_interval,
unsigned nbuttons,
struct gpio_button *buttons) __init;
void ar71xx_add_device_usb(void) __init;
void ar71xx_add_device_uart(void) __init;

View File

@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -20,6 +19,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define AP81_GPIO_LED_STATUS 1

View File

@ -11,7 +11,6 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
@ -24,6 +23,7 @@
#include "devices.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define AP83_GPIO_LED_WLAN 6
@ -37,6 +37,8 @@
#define AP83_050_GPIO_VSC7385_MOSI 16
#define AP83_050_GPIO_VSC7385_SCK 17
#define AP83_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition ap83_flash_partitions[] = {
{
@ -214,7 +216,8 @@ static void __init ap83_generic_setup(void)
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
ap83_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(ap83_gpio_buttons),
ap83_gpio_buttons);
ar71xx_add_device_usb();

View File

@ -12,13 +12,13 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-gpio-buttons.h"
#include "dev-pb42-pci.h"
#include "dev-leds-gpio.h"

View File

@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -20,6 +19,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */

View File

@ -13,7 +13,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/rtl8366_smi.h>
@ -23,6 +22,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap94-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define DIR825B1_GPIO_LED_BLUE_USB 0

View File

@ -13,13 +13,13 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define MZK_W04NU_GPIO_LED_USB 0

View File

@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -20,6 +19,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define MZK_W300NH_GPIO_LED_STATUS 1

View File

@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <asm/mips_machine.h>
@ -19,6 +18,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-gpio-buttons.h"
#include "dev-pb42-pci.h"
#define PB42_BUTTONS_POLL_INTERVAL 20

View File

@ -10,7 +10,6 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
@ -25,6 +24,7 @@
#include "devices.h"
#include "dev-pb42-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define PB44_PCF8757_VSC7395_CS 0

View File

@ -15,13 +15,13 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/pci.h>
#include "devices.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define RB4XX_GPIO_USER_LED 4

View File

@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -20,6 +19,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define TEW_632BRP_GPIO_LED_STATUS 1

View File

@ -11,15 +11,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define TL_WR1043ND_GPIO_LED_USB 1

View File

@ -11,15 +11,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define TL_WR741ND_GPIO_LED_QSS 0

View File

@ -11,13 +11,13 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-gpio-buttons.h"
#include "dev-pb42-pci.h"
#include "dev-leds-gpio.h"

View File

@ -11,7 +11,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -19,6 +18,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define TL_WR941ND_GPIO_LED_SYSTEM 2

View File

@ -12,7 +12,6 @@
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -20,6 +19,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-pb42-pci.h"
#include "dev-leds-gpio.h"

View File

@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/rtl8366_smi.h>
@ -22,6 +21,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap94-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define WNDR3700_GPIO_LED_WPS_ORANGE 0

View File

@ -13,15 +13,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define WNR2000_GPIO_LED_PWR_GREEN 14

View File

@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -21,6 +20,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-pb42-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define WP543_GPIO_SW6 2

View File

@ -11,7 +11,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -19,6 +18,7 @@
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define WRT160NL_GPIO_LED_POWER 14

View File

@ -12,13 +12,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-gpio-buttons.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define WRT400N_GPIO_LED_ORANGE 5