..
b53
generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN
2013-02-21 11:45:38 +00:00
adm6996.c
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
2011-05-09 15:21:58 +00:00
adm6996.h
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
2011-05-09 15:21:58 +00:00
ar8216.c
generic: ar8216: simplify and rename ar8327_config_port
2013-03-15 15:49:57 +00:00
ar8216.h
generic: ar8216: add defines for the AR8316 POSTRIP register
2013-02-10 13:18:48 +00:00
ip17xx.c
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
2010-10-12 20:49:35 +00:00
micrel.c
ar71xx: move micrel PHY driver to the generic linux target
2012-03-15 09:25:53 +00:00
mvswitch.c
generic: mvswitch: add detach callback
2013-02-07 15:18:34 +00:00
mvswitch.h
rename target/linux/generic-2.6 to generic
2010-06-26 20:42:58 +00:00
psb6970.c
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
2010-10-12 20:49:35 +00:00
rtl8306.c
rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches ( fixes #8911 )
2011-04-02 16:35:22 +00:00
rtl8366_smi.c
generic: rtl8366_smi: only assign pvid if no pvid was set yet
2013-01-18 15:19:11 +00:00
rtl8366_smi.h
linux: generic: rtl836*: fix compilation with !CONFIG_OF
2012-12-15 13:32:02 +00:00
rtl8366rb.c
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
2013-01-27 17:48:48 +00:00
rtl8366s.c
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
2013-01-27 17:48:48 +00:00
rtl8367.c
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
2013-01-27 17:48:48 +00:00
rtl8367b.c
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
2013-01-27 17:48:48 +00:00
swconfig.c
swconfig: make it compatible with 3.7
2012-11-21 17:38:11 +00:00
swconfig_leds.c
generic: swconfig: use led_set_brightness in LED control code
2012-10-26 18:58:18 +00:00