hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions....

993 lines
22 KiB
Diff
Raw Permalink Blame History

--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
#address-cells = <1>;
@@ -28,6 +30,16 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2a>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
cpu1: cpu@1 {
@@ -38,11 +50,458 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2b>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+ };
+
+ qcom,l2 {
+ qcom,l2-rates = <384000000 1000000000 1200000000>;
+ qcom,l2-cpufreq = <384000000 600000000 1200000000>;
+ qcom,l2-volt = <1100000 1100000 1150000>;
+ qcom,l2-supply = <&smb208_s1a>;
+ };
+
+ idle-states {
+ CPU_SPC: spc {
+ compatible = "qcom,idle-state-spc", "arm,idle-state";
+ status = "disabled";
+ entry-latency-us = <400>;
+ exit-latency-us = <900>;
+ min-residency-us = <3000>;
+ };
+ };
+ };
+
+ opp_table0: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1000000>;
+ opp-microvolt-speed0-pvs1-v0 = <925000>;
+ opp-microvolt-speed0-pvs2-v0 = <875000>;
+ opp-microvolt-speed0-pvs3-v0 = <800000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <975000>;
+ opp-microvolt-speed0-pvs2-v0 = <925000>;
+ opp-microvolt-speed0-pvs3-v0 = <850000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1100000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000>;
+ opp-microvolt-speed0-pvs2-v0 = <995000>;
+ opp-microvolt-speed0-pvs3-v0 = <900000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1150000>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000>;
+ opp-microvolt-speed0-pvs3-v0 = <950000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1200000>;
+ opp-microvolt-speed0-pvs1-v0 = <1125000>;
+ opp-microvolt-speed0-pvs2-v0 = <1075000>;
+ opp-microvolt-speed0-pvs3-v0 = <1000000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1250000>;
+ opp-microvolt-speed0-pvs1-v0 = <1175000>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000>;
+ opp-microvolt-speed0-pvs3-v0 = <1050000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+ };
+
+ thermal-zones {
+ tsens_tz_sensor0 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor3 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor4 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor5 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor6 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor7 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor8 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor9 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor10 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
};
};
@@ -93,6 +552,15 @@
};
};
+ fab-scaling {
+ compatible = "qcom,fab-scaling";
+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
+ clock-names = "apps-fab-clk", "ddr-fab-clk";
+ fab_freq_high = <533000000>;
+ fab_freq_nominal = <400000000>;
+ cpu_freq_threshold = <1000000000>;
+ };
+
firmware {
scm {
compatible = "qcom,scm-ipq806x", "qcom,scm";
@@ -120,6 +588,84 @@
reg-names = "lpass-lpaif";
};
+ qfprom: qfprom@700000 {
+ compatible = "qcom,qfprom", "syscon";
+ reg = <0x700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+ tsens_calib: calib@400 {
+ reg = <0x400 0xb>;
+ };
+ tsens_backup: backup@410 {
+ reg = <0x410 0xb>;
+ };
+ speedbin_efuse: speedbin@0c0 {
+ reg = <0x0c0 0x4>;
+ };
+ };
+
+ rpm: rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+ clock-names = "ram";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+
+ smb208_s1a: s1a {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s1b: s1b {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2a: s2a {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2b: s2b {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+ };
+ };
+
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+
qcom_pinmux: pinmux@800000 {
compatible = "qcom,ipq8064-pinctrl";
reg = <0x800000 0x4000>;
@@ -159,6 +705,15 @@
};
};
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
@@ -168,6 +723,53 @@
};
};
+ nand_pins: nand_pins {
+ disable {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ pullups {
+ pins = "gpio39";
+ function = "nand";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-bus-hold;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
leds_pins: leds_pins {
mux {
pins = "gpio7", "gpio8", "gpio9",
@@ -229,6 +831,17 @@
clock-output-names = "acpu1_aux";
};
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clock-output-names = "acpu_l2_aux";
+ };
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ #clock-cells = <1>;
+ };
+
saw0: regulator@2089000 {
compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
@@ -241,6 +854,17 @@
regulator;
};
+ saw_l2: regulator@02012000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
+
+ sic_non_secure: sic-non-secure@12100000 {
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
@@ -436,6 +1060,15 @@
#power-domain-cells = <1>;
};
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,ipq8064-tsens";
+ reg = <0x900000 0x3680>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-ipq8064", "syscon";
reg = <0x1a400000 0x100>;
@@ -448,6 +1081,95 @@
#reset-cells = <1>;
};
+ sfpb_mutex_block: syscon@1200600 {
+ compatible = "syscon";
+ reg = <0x01200600 0x100>;
+ };
+
+ hs_phy_0: hs_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_0: ss_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_0: usb3@110f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x110f8800 0x8000>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_0_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_0: dwc3@11000000 {
+ compatible = "snps,dwc3";
+ reg = <0x11000000 0xcd00>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ hs_phy_1: hs_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_1: ss_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_1: usb3@100f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x100f8800 0x8000>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_1_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_1: dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
pcie0: pci@1b500000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b500000 0x1000
@@ -601,6 +1323,167 @@
perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
};
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
+ nand_controller: nand-controller@1ac00000 {
+ compatible = "qcom,ipq806x-nand";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
+
+ qsgmii_csr: syscon@1bb00000 {
+ compatible = "syscon";
+ reg = <0x1bb00000 0x000001FF>;
+ };
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <7>;
+ snps,rd_osr_lmt = <7>;
+ snps,blen = <16 0 0 0 0 0 0>;
+ };
+
+ mdio0: mdio@37000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qcom,ipq8064-mdio", "syscon";
+ reg = <0x37000000 0x200000>;
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE2_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE2_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE3_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE3_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE4_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE4_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
@@ -676,4 +1559,17 @@
};
};
};
+
+ sfpb_mutex: sfpb-mutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_block 4 4>;
+
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
};
Reference in New Issue View Git Blame Copy Permalink