ec41ca3a47
kernel: make kmod-pcnet32 depend on kmod-mii
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38531
2013-10-25 01:47:45 +00:00
294a57822e
kernel: add mii library kernel module package
...
This package is required for network drivers such as pcnet32
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38530
2013-10-25 01:47:32 +00:00
537e301fab
ath9k: gather entropy from raw ADC I/Q samples (use the least significant bit only)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38486
2013-10-20 17:51:17 +00:00
bc3d7c2f1b
rt2800usb: merge a fix to slow down tx status polling ( #13523 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38452
2013-10-18 13:39:10 +00:00
d8311375eb
kernel: imx6: add modules needed for sgtl5000 audio codec
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38427
2013-10-16 03:25:59 +00:00
e90e74000a
rt2x00: fix rf id for rt3352 ( #14322 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38399
2013-10-14 19:40:30 +00:00
f1ea6d3c2d
ath9k: add some more pending fixes / optimizations
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38398
2013-10-14 19:38:42 +00:00
d21810a298
ath5k: fix tx status processing errors (causing packet loss and throughput issues)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38396
2013-10-14 19:20:05 +00:00
b907e95125
ath9k: reduce rx buffer allocation size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38395
2013-10-14 19:20:02 +00:00
e1523b5504
switch: remove old switch driver
...
The switch driver is not used by brcm47xx any more and can be removed,
instead of this switch driver b53 is used now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38387
2013-10-13 22:15:31 +00:00
59b362a204
mac80211: b43: fix prefix for config options
...
Config options in backports are starting with CPTCFG and not with CONFIG_.
CONFIG_B43_BCMA was never true.
This closes #13883 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38385
2013-10-13 20:25:12 +00:00
c240ee84e9
zd1201: fix url to zd1201 firmware
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38378
2013-10-12 22:36:08 +00:00
af32e63bae
lantiq: add some missing PKG_SOURCE_URLs
...
These URLs where missing and causes build failures.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38376
2013-10-12 22:33:55 +00:00
408af1f6c7
kernel: add kirkwood thermal module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38371
2013-10-12 16:26:55 +00:00
06f3f01b06
acx-mac80211: update to latest version
...
Fixes compilation for linux 3.10.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38367
2013-10-12 10:50:35 +00:00
8a240be62b
ar7-atm: fix compilation for linux 3.10
...
Update proc code to new proc_create to allow compilation with
linux 3.10+.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38366
2013-10-12 10:50:19 +00:00
a3cc10cba7
ath9k: fix rx issues introduced in my last commit ( fixes #14307 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38362
2013-10-10 21:10:45 +00:00
d45a1618eb
ath9k: add some cleanups and minor fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38354
2013-10-10 14:31:22 +00:00
b814661167
mac80211: rtlwifi: Align private space in rtl_priv struct
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38346
2013-10-09 09:13:41 +00:00
925f37a5a6
kernel: dont rely on library modules to be depended on
...
fixes https://dev.openwrt.org/ticket/14257
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38341
2013-10-08 15:08:33 +00:00
c8e742a080
mac80211: wl12xx: build them again
...
WL_TI is bool but was set to =m, which deactivated it. Now it is set to
=y and should be activated in the config so the wl12xx driver gets
build.
This closes #14212 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38333
2013-10-07 22:16:17 +00:00
16675de754
mac80211: brcmfmac: BRCMFMAC_USB was not set in config
...
Somehow BRCMFMAC_USB was not set in the build and brcmfmac.ko did not had usb support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38332
2013-10-07 21:49:28 +00:00
c1316c09a1
lantiq: fix ltq_ptm compile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38329
2013-10-07 20:13:32 +00:00
048fc8f0c1
ath9k: fix tx queueing issues after background scans
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38304
2013-10-05 12:12:21 +00:00
caff3b5aee
broadcom-diag: fix 'autoload' number of diag.ko
...
Change the autoload number from '5' to '05' so the module loads earlier (as intended).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38293
2013-10-02 23:14:08 +00:00
302d27f268
c80211: add iwldvm to iwlwifi, this is needed to support the old wifi card.
...
This closes #14258
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38277
2013-10-01 22:41:46 +00:00
c57ac5fcb7
kernel: add industrialio-triggered-buffer.ko only when the config option is selected.
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38276
2013-10-01 22:40:32 +00:00
1158f22b02
ep93xx: fix sound dependencies for ep93xx
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38274
2013-10-01 22:38:40 +00:00
391ec155a0
kernel: lib-textsearch needs to be auto probed for amanda nat to work
...
https://dev.openwrt.org/ticket/14232
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38262
2013-09-30 20:48:12 +00:00
17be4e9d14
mac80211: add AP inactivity handling / probing fixes to improve stability
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38257
2013-09-29 19:42:00 +00:00
f07713f7cf
mac80211: really fix the long standing wds ap tx power regression ( #14153 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38255
2013-09-29 12:53:21 +00:00
2beabf6c11
ath9k: fix an AP mode powersave issue with aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38249
2013-09-29 11:07:58 +00:00
32d54de3b9
kernel: disable kmod-iio for linux 3.6 as well (to avoid build issues due to missing config symbol changes)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38247
2013-09-28 05:22:05 +00:00
e2420239ae
kernel: exclude regmap-spi.ko if SPI support cannot be selected
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38245
2013-09-27 21:12:15 +00:00
1f037b5248
kernel: make sound-soc-core depend on kmod-ac97
...
it has a conditional #ifdef based dependency on it, which trips up on
some targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38242
2013-09-27 21:12:04 +00:00
3c045e9933
kernel: remove old kernel compat code for pcmcia
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38239
2013-09-27 20:47:09 +00:00
e232a92c08
kernel: mark kmod-thermal menuconfig symbol as hidden to avoid building it on targets with no thermal drivers
...
Should fix build errors with Linux 3.3/3.6 targets, which use different
kconfig symbols
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38238
2013-09-27 20:44:11 +00:00
eb486aadb8
kernel: add thermal modules
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38230
2013-09-27 10:49:33 +00:00
7530971113
package/kernel: add support for industrial-io and AD799x
...
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38187
2013-09-25 18:00:35 +00:00
4fcc9ce9ff
package/kernel: add hwmon driver for ADT7410
...
Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38186
2013-09-25 18:00:34 +00:00
6ac0dfb280
package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
...
Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38185
2013-09-25 18:00:33 +00:00
9d24525b1d
kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38055
2013-09-19 06:33:53 +00:00
5799adc238
lantiq: fix bug in hcd gpio detetcion code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38043
2013-09-18 16:31:49 +00:00
4c52ed50d7
brcm47xx: update board detection patches
...
This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38036
2013-09-18 14:33:54 +00:00
50bc1a7593
ath9k: add missing tx locking
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38034
2013-09-18 13:24:55 +00:00
1878a3d6ab
lantiq: add v3.10 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
2b0cb17d42
lantiq: update packages for v3.10
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38028
2013-09-17 21:45:56 +00:00
f12f4074af
kernel: make most modules use AutoProbe
...
now that we have modprobe we can set more than half of the modules to AutoProbe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38021
2013-09-17 21:45:17 +00:00
b3ceaf834d
ath9k: merge a fix for PS-Poll responses + aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38017
2013-09-17 10:07:56 +00:00
5d8cdd84e8
kernel: fix config symbol for kmod-crypto-hash
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38015
2013-09-17 09:54:05 +00:00
fd44388bbf
mac80211: drop spoofed packets in ad-hoc mode ( fixes #12427 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38013
2013-09-17 09:17:40 +00:00
bf8cf89fc9
broadcom-diag: add GPIO configuration for Linksys E2000 V1
...
Thank you Javier Achirica for the patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38008
2013-09-16 19:52:23 +00:00
2b4e96fe09
broadcom-diag: Add WRT310N v1 gpio leds and buttons
...
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38007
2013-09-16 19:50:14 +00:00
86405f2c4c
brcm47xx: add detection code for Huawei E970
...
This is based on a patch by Mathias Adam.
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38001
2013-09-15 17:00:45 +00:00
7a704be4bb
ath9k: add another minor tx path fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37985
2013-09-14 15:30:13 +00:00
6eeb0261e6
ath9k: merge a fix for tx processing issues with aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37982
2013-09-14 14:46:39 +00:00
0c597a8f53
kernel: add missing config option
...
SVN-Revision: 37978
2013-09-13 20:39:23 +00:00
b73b915c54
brcm47xx: board detection, GPIO for Linksys E1000 V2.1
...
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.
This fixes bug #14135 . Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.
Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37977
2013-09-13 19:24:08 +00:00
6c14f5f3a6
brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
...
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37970
2013-09-13 16:00:52 +00:00
15ea1a6d66
kernel: gsc depends on kmod-i2c-core
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37960
2013-09-12 23:38:54 +00:00
e4c837f6d6
kernel: fix imx sata module
...
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37950
2013-09-11 22:08:46 +00:00
a43c2d4e6f
kernel: add imx sata module
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37937
2013-09-10 22:26:37 +00:00
7d73153e86
kernel: allow hwmon GSC driver for all targets
...
- enable using hwmon GSC driver on all targets
- add a kmod package for it
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37933
2013-09-10 22:26:30 +00:00
247299bfa0
rt2x00: merge an rt2800 initialization order fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37922
2013-09-09 17:31:53 +00:00
768e6750d7
ath9k: clean up some patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37919
2013-09-08 09:38:38 +00:00
249c396583
mac80211: merge a big batch of upstream changes/improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37918
2013-09-08 09:38:32 +00:00
bdc04e379f
mac80211: kmod-rtl_pci: fix dependencies
...
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37905
2013-09-05 20:17:28 +00:00
f9b790bd55
kernel: kmod-libphy, kmod-tg3: fix load order
...
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
9af52f3a2c
kernel: kmod-ssb, kmod-b44: fix load order
...
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37903
2013-09-05 19:56:04 +00:00
fd561a47c5
kernel: kmod-firewire: fix dependencies
...
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37902
2013-09-05 19:53:21 +00:00
11ae55cc95
mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
...
linux-firemware contains the same version we loaded without this patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
14a65f1cfb
kernel: kmod-fs-xfs: fix dependencies
...
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37900
2013-09-05 19:41:00 +00:00
09a55136d7
kernel: kmod-usb-serial-keyspan: fix dependencies
...
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37899
2013-09-05 19:39:55 +00:00
82a2969100
ath10k: enable Atheros 802.11ac driver
...
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.
This goes build tested, not run time tested.
[Hauke: I did some minor changes]
Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37898
2013-09-05 19:35:14 +00:00
b85c090177
package/rotary-gpio-custom: fix checkpatch errors module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37875
2013-09-02 08:45:32 +00:00
1928106d0d
package/w1-gpio-custom: fix checkpatch errors in module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37874
2013-09-02 08:45:31 +00:00
f18a0d9547
package/i2c-gpio-custom: fix checkpatch errors in module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37873
2013-09-02 08:45:30 +00:00
6bb50e4df1
package/kernel: add spi-gpio-custom module
...
The package makes it possible to create custom SPI
buses via GPIO lines.
This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.
Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
- change subject,
- extend and reformat commit message,
- cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37872
2013-09-02 08:45:29 +00:00
0a85c59040
netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration
...
SVN-Revision: 37866
2013-09-01 17:59:48 +00:00
6c29525f42
mac80211: add a bunch of rt2x00 specific changes
...
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.
Also refresh the rt2x00 specific patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37843
2013-08-27 10:44:06 +00:00
eaa8cb7834
mac80211: merge a few ad-hoc mode fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37840
2013-08-26 17:31:23 +00:00
9cf157ac75
mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37839
2013-08-26 17:31:15 +00:00
b04baf0d0c
crypto: add missing depends for crypto-manager
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37817
2013-08-21 00:36:19 +00:00
2fc0c28345
broadcom-diag: remove BUFFALO_UNKNOWN
...
This was itriggered by to many non buffalo devices
This closes #14043 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37804
2013-08-17 13:43:07 +00:00
e12b5ec8df
broadcom-wl: Add 'N' mode support to broadcom-wl
...
This is partly based on patches sent by Łukasz Kwestarz (See https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014356.html ).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37802
2013-08-17 13:38:30 +00:00
d03d3aa58c
mac80211: merge upstream change to fix mesh rssi thresholds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37793
2013-08-15 13:57:11 +00:00
bbf4412bee
ath9k: merge a few more cleanups/fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37767
2013-08-13 10:35:18 +00:00
253d2b511b
ath9k: reorganize patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37766
2013-08-13 10:35:14 +00:00
ead5aa354c
mac80211: merge upstream patch to suppress unnecessary ad-hoc mode scan with fixed-freq, fixed-bssid
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37764
2013-08-13 10:35:04 +00:00
acb9bc0f5e
kernel: remove imx-sdma-fw because of license issues
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37755
2013-08-12 10:48:05 +00:00
556e850dfd
kernel: add imx-sdma-fw package
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37753
2013-08-11 15:10:42 +00:00
fd586c0275
ath9k: fix an rx descriptor processing race condition
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37746
2013-08-10 14:00:33 +00:00
39ab281fae
mac80211: Handle concurrent AP/STA beaconing properly
...
Use the "start_disabled" option in hostapd that was added
in the earlier patch.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37732
2013-08-06 17:59:09 +00:00
bdb2859a48
ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37716
2013-08-06 10:31:10 +00:00
5bce86faa2
mac80211: refresh a patch that was using the wrong patch style
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37715
2013-08-06 10:31:06 +00:00
48b3b74da7
mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37714
2013-08-06 10:31:02 +00:00
592f2c6e2b
ath9k: add some more fixes for the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37713
2013-08-06 10:30:58 +00:00
3f351e2770
mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37711
2013-08-05 21:57:48 +00:00
9d4145efe5
kernel: fix DMA error when BCM4331 is connected to BCM4706
...
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37709
2013-08-05 16:17:05 +00:00
6743f2625b
gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37702
2013-08-05 10:32:13 +00:00
259c36358f
mac80211: fix rt2x00 dependency
...
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
2013-08-05 09:24:19 +00:00
885cf1f19f
mac80211: rt2x00: fix LED polarity patch
...
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
2013-08-05 09:09:41 +00:00
3573494b19
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
...
Closes #13951 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
2013-08-05 09:09:40 +00:00
c7976ae5f8
mac80211: add rtlwifi drivers
...
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
2013-08-04 15:32:36 +00:00
2fcaba306e
brcm47xx: change board detection for some Asus devices
...
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
2013-08-04 12:36:13 +00:00
0d9ecfa564
kernel: kmod-appletalk: fix dependencies
...
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.
This fixes the missing dependency of kmod-appletalk on psnap.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37673
2013-08-04 09:51:07 +00:00
7dea39fda2
broadcom-diag: show error message in case something goes wrong with gpio irq
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37668
2013-08-03 17:12:07 +00:00
309123bbfd
broadcom-diag: add gpio config for Asus RT-N66U
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37667
2013-08-03 17:10:37 +00:00
b1b3067a12
broadcom-diag: add gpio config for Linksys E4200v1
...
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37666
2013-08-03 17:09:39 +00:00
18e37d8caf
gpio-button-hotplug: cleanup, fix compiler warning
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37665
2013-08-03 11:56:27 +00:00
4281026dda
gpio-button-hotplug: fix active_low handling, possibly broken in r37643
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37664
2013-08-03 11:49:50 +00:00
d2ed54596d
kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is set
...
SVN-Revision: 37661
2013-08-03 10:10:16 +00:00
f43b6b2bea
kernel: add missing module to video-core for kernel < 3.6
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37659
2013-08-02 20:08:20 +00:00
65ef965e6e
kernel: fix usb-chipidea compilation with kernel <= 3.9
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37658
2013-08-02 20:07:11 +00:00
58274d68fb
broadcom-diag: add support for the ASUS RT-N12
...
This adds button and led info, which I determined
by manually poking the gpio values.
Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37655
2013-08-02 15:44:04 +00:00
af970e66bf
broadcom-diag: increase version number
...
There are some changes in there and this should be rebuild.
SVN-Revision: 37654
2013-08-02 15:06:14 +00:00
1972a131a0
mac80211: backport a few upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37653
2013-08-02 10:02:35 +00:00
0fe808d032
kernel: load libphy before tg3
...
SVN-Revision: 37651
2013-08-01 22:19:19 +00:00
2b55968f5d
brcm47xx: improve detection of Linksys WRTSL54GS
...
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37647
2013-08-01 19:33:59 +00:00
1eabf431df
gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.
...
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions. At leat 1 button is in pressed state
in any of those positions. Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37643
2013-08-01 14:31:28 +00:00
ef96422920
gpio-button-hotplug: use gpio_button_get_value() to fetch state.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37642
2013-08-01 14:31:24 +00:00
2c19af6ac5
gpio-button-hotplug: add inline function gpio_button_get_value().
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37641
2013-08-01 14:31:20 +00:00
e77339b9e2
broadcom-wl: fix compile error with kernel 3.10
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37626
2013-07-31 17:42:55 +00:00
5bd3f8b164
mac80211: rt2x00: add missing of.h header
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37618
2013-07-29 22:45:57 +00:00
36e6d4ca53
ath9k: fix several issues in the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37616
2013-07-29 19:44:05 +00:00
2b906791be
mac80211: rt2x00: fix default register settings for rt5350
...
Comparing the RTSDK driver and mac80211 revealed, that this register needs
to have a special setup on rt5350.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37608
2013-07-29 13:10:12 +00:00
7f895c6776
mac80211: rt2x00: enable setting wifi led polarity from OF
...
This patch enables setting the wifi led polarity from OF.
It can be used in a DTS' wmac section like this:
ralink,led-polarity = <1>;
Valid values are 0 or 1.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37607
2013-07-29 13:09:16 +00:00
1ff304e5f5
rt2x00: merge fix for queue stopping
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37603
2013-07-29 12:49:01 +00:00
c67a12711d
mac80211: add support for verbose builds using V=sc
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37597
2013-07-29 09:38:08 +00:00
181cb9f3fa
kernel: add usb-mxs-phy package
...
SVN-Revision: 37580
2013-07-28 20:34:18 +00:00
cc4bda8d67
kernel: update usb-chipidea package
...
SVN-Revision: 37579
2013-07-28 20:34:17 +00:00
769f986d9a
kernel: update usb2 package
...
SVN-Revision: 37578
2013-07-28 20:34:09 +00:00
4176b6fdd3
strict_strtoul is obsolete, use kstrtoul instead
...
based on http://patchwork.openwrt.org/patch/3827/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37562
2013-07-27 09:23:18 +00:00
4478c69b86
authsae: adapt uci scripts to use authsae
...
This patch modifies the uci scripts to be able to
start meshd-nl80211 for encrypted mesh networks,
therefor a new script (authsae.sh) is inserted.
Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
[etienne.champetier@free.fr: just update mac80211.sh path]
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 37554
2013-07-26 10:02:59 +00:00
aa81b9ed5f
kernel: be consistent with formatting style
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37545
2013-07-26 01:09:50 +00:00
3251cddf31
mac8021: add ath9k pcie id for AR9381
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37536
2013-07-25 20:28:45 +00:00
b037b0011e
kernel: ebtables depends on bridge
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37520
2013-07-23 19:53:08 +00:00
06a27059bd
lantiq: dont build ar10 drivers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37500
2013-07-22 13:53:01 +00:00
94439c2b5d
kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37491
2013-07-21 11:55:30 +00:00
11c5730695
kernel: fix config breakage from removing the de4x5 tulip driver
...
Properly define the config symbol to n so it doesn't break build for
targets which do have it available (e.g. mostly everything except arm).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37489
2013-07-21 11:08:38 +00:00
c493e45058
kernel: fix kmod-crypto-hw-ppc4xx dependencies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37488
2013-07-21 08:20:01 +00:00
2ea287816c
kernel: add missing config symbol for the chipidea usb driver
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37487
2013-07-21 08:19:58 +00:00
4332b7fce5
kernel: remove an exotic ethernet driver from the tulip package which does not build on some platforms
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37486
2013-07-21 08:06:56 +00:00
0494ec45f1
kernel: fix crypto-hw-talitos dependencies
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37485
2013-07-20 20:44:40 +00:00
a0129dfd8e
ath9k: add initial tx queueing rework patches
...
This forces all packets (even for un-aggregated traffic) through
software queues to improve fairness and stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37483
2013-07-20 16:37:50 +00:00
9ba76039d6
kernel: fix kmod-fs-btrfs dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37466
2013-07-19 23:10:40 +00:00
28752830c7
kernel: add fbdev.ko to kmod-fb on x86 dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37460
2013-07-19 22:30:35 +00:00
251b414641
kernel: fix kmod-rtc-pcf8563 dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37459
2013-07-19 22:27:31 +00:00
221ddfa19b
kernel: package the usbmon module
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37458
2013-07-19 22:19:26 +00:00
ddb0804479
kernel: simplify kmod-crypto-misc dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37448
2013-07-19 15:01:22 +00:00
4dbc5c64fa
kernel: fix kmod-et131x dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37446
2013-07-19 14:53:29 +00:00
5920feafda
kernel: fix usb-net-asix dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37445
2013-07-19 14:51:15 +00:00
0cb97db4be
kernel: fix crypto-hw-geode dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37443
2013-07-19 14:46:02 +00:00
0256b82631
kernel: fix crypto-hw-padlock dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37442
2013-07-19 14:44:12 +00:00
4a9adf4300
kernel: fix syntax error in kmod-crypto-misc
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37441
2013-07-19 14:41:33 +00:00
7642a4eeaa
kernel: add missing module for mmc-spi
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37440
2013-07-19 14:13:45 +00:00
85fb0fb29e
ltq-deu: add missing dependency
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37439
2013-07-19 14:10:18 +00:00
d6e9934924
kernel: fix kmod-usb-chipideai syntax
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37438
2013-07-19 13:35:28 +00:00
c12085a578
kernel: fix kmod-usb-chipideai dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37437
2013-07-19 13:23:47 +00:00
29954b9ffc
kernel: remove gpio_buttons
...
It hasn't been buildable for a long time, and there are no users of it
anymore left as all of them have been switched to the upstream accepted
version.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37436
2013-07-19 13:20:41 +00:00
1b5aa23ca2
button-hotplug: add missing dependency on kmod-input-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37429
2013-07-19 10:38:48 +00:00
f71d47e58e
linux: fix platform dependency of kmod-usb2-fsl
...
SVN-Revision: 37428
2013-07-19 10:34:40 +00:00
dd61797e96
linux: kmod-ipt-filter depends on kmod-ipt-conntrack
...
SVN-Revision: 37427
2013-07-19 10:08:26 +00:00
1f59f8ed40
kernel: change ipt depends to a select
...
Fixes recursive dependencies with kmod-ipt-core.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37426
2013-07-19 09:59:34 +00:00
108b880748
mac80211: add missing dependencies
...
Add missing dependencies for rt2800-lib and lib80211.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37422
2013-07-19 09:49:04 +00:00
85cf95b73a
kernel: video-core depends on i2c-core if i2c-core is selected
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37421
2013-07-18 20:40:17 +00:00
fe1a84ad71
kernel: kmod-gpio-mcp23s08 depends on i2c-core
...
But only if it is selected, so make it a conditionl dependency.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37420
2013-07-18 20:40:15 +00:00
5e239a0fa4
kernel: kmod-pcmcia-serial requires kmod-serial-8250
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37419
2013-07-18 20:40:13 +00:00
f3755ec53c
kernel: kmod-e1000e depends on pip for 3.8+
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37418
2013-07-18 20:40:10 +00:00
eee81c5fbf
kernel: net-zd1201 depends on usb-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37416
2013-07-18 17:26:43 +00:00
3b985bae1b
kernel: fix usb-net-cdc-mbim dependencies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37415
2013-07-18 17:26:39 +00:00
b30b62619c
kernel: usb-serial-qualcomm depends on usb-serial-wwan
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37414
2013-07-18 17:26:36 +00:00
6fc24f7768
kernel: usb-serial-keyspan needs to include ezusb.ko
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37413
2013-07-18 17:26:32 +00:00
2bc5b4a02a
kernel: usb-serial-ipw depends on usb-serial-wwan
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37412
2013-07-18 17:26:28 +00:00
225cb7a3d7
kernel: mtdtests depends on nand
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37411
2013-07-18 17:26:24 +00:00
ec5f8304b2
kernel: bluetooth depends on crypto-hash
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37410
2013-07-18 17:26:21 +00:00
3dfe4bc893
kernel: rfkill depends on input-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37409
2013-07-18 17:26:17 +00:00
9ea4b73748
kernel: split slhc into a separate package and make slip depend on it
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37408
2013-07-18 17:26:13 +00:00
b4a847be93
kernel: fix accidental depends line duplication
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37407
2013-07-18 16:49:55 +00:00
f766aa2dee
kernel: sctp depends on ipv6 if ipv6 is enabled
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37406
2013-07-18 16:46:11 +00:00
58f50a7dbd
kernel: make kmod-sched depend on kmod-ipt-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37404
2013-07-18 16:32:12 +00:00
5308e258da
kernel: reduce spurious rebuilds of simple kmod-* packages
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37403
2013-07-18 16:32:07 +00:00
32d810e75a
linux: introduce new kmod-iptunnel for Linux 3.10+, add missing dependencies to netsupport packages
...
SVN-Revision: 37402
2013-07-18 15:47:13 +00:00
44fd7d9626
linux: add missing netfilter dependencies
...
SVN-Revision: 37401
2013-07-18 15:47:08 +00:00
a5f93fad9d
linux: add missing dependency to kmod-i2c-tiny-usb
...
SVN-Revision: 37399
2013-07-18 13:57:40 +00:00
8500a3fea4
linux: add missing dependencies to kmod-fs-msdos and kmod-fs-xfs
...
SVN-Revision: 37398
2013-07-18 13:57:36 +00:00
a842efc8cd
kernel: btrfs supports raid6 in 3.10, thus depends on lib-raid6
...
btrfs now supports raid5/6 and added appropriate depenendcies for 3.10.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37396
2013-07-18 13:08:35 +00:00
eaadc5c4f9
kernel: move xor into its own package
...
xor.ko is needed by btrfs in 3.10+, so split it out into its own
package. Make it hidden as it does not provide any functionality on its
own.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37395
2013-07-18 13:08:33 +00:00
050061a565
kernel: split out lib-raid6
...
raid_pq.ko is needed by btrfs in 3.10+, so split it out into its own
package. Make it hidden as it does not provide any functionality on its
own.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37394
2013-07-18 13:08:31 +00:00
69de869b0f
kernel: kmod-dm depends on crypto
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37393
2013-07-18 13:08:29 +00:00
9a38971a3e
kernel: crypto: add missing dependencies and files
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37392
2013-07-18 13:08:27 +00:00
5b931b9ec0
kernel: drop kmod-ata-sis
...
it was broken since 2.6.21, evidently nobody uses it and we can just
remove it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37391
2013-07-18 13:08:23 +00:00
b44ece50d4
linux: add missing dependencies to kmod-ip6tables
...
SVN-Revision: 37389
2013-07-18 11:57:19 +00:00
6640b83a3e
build: add kernel modules to package provides info (along with shared libs)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37385
2013-07-18 10:47:00 +00:00
8aa106cf43
imx23: ChipIdea changes
...
- move ci_hdrc into generic modules
- add separate package for imx-specific modules
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37384
2013-07-17 22:49:16 +00:00
eb8d23819f
ath5k: fix AHB support dependency ( #13896 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37377
2013-07-17 13:58:15 +00:00
d530ad0732
kernel: add sound-soc-imx-sgtl5000
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37360
2013-07-15 23:18:34 +00:00
b3ec189cdb
kernel: add sound-soc-imx
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37359
2013-07-15 23:18:33 +00:00
a5e70c13f8
mac80211: fix a crash in legacy minstrel when no STA exists
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37342
2013-07-15 12:35:23 +00:00
3cfa187818
kernel: add usb-dwc2 kmod
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37338
2013-07-15 11:08:04 +00:00
Florian Fainelli
Felix Fietkau
Luka Perkov
Hauke Mehrtens
Jonas Gorski
John Crispin
Gabor Juhos
Steven Barth
Jo-Philipp Wich
Zoltan Herpai