ae225124c6
lantiq: fix fritz image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38326
2013-10-07 15:02:52 +00:00
1398a5d849
lantiq: fix eva partition split for squashfs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38325
2013-10-07 15:02:48 +00:00
4f3797386f
lantiq: add support for VGV7519 KPN Experia box v8
...
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38266
2013-09-30 20:48:46 +00:00
bff3637d24
lantiq: add a default for CONFIG_MTD_NAND_XWAY to fix build errors
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38243
2013-09-27 21:12:08 +00:00
9c8a5ef115
kernel: update 3.10 to 3.10.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
a30681dff0
build: unify mips target cflags
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
0380904acb
kernel/3.10: refresh all target patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
482b5f34e5
lantiq/3.10: unbreak the mtd-split patch
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38180
2013-09-25 16:22:04 +00:00
7665c57a72
lantiq: fix usb on sx76x
...
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 38083
2013-09-20 14:24:30 +00:00
d2ad87885d
lantiq: style fixes
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38051
2013-09-19 00:50:49 +00:00
43f1a47430
lantiq: add initial support for Siemens GIGASX76X
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38050
2013-09-19 00:50:48 +00:00
3b33adeb99
lantiq: add support for ZyXEL P2601HNFX
...
SVN-Revision: 38049
2013-09-19 00:50:46 +00:00
7d2c5682b9
lantiq: add support for ZTE H201L
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38048
2013-09-19 00:50:44 +00:00
40ac8dd9df
lantiq: fix FRITZ7320 flash window size
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38042
2013-09-18 16:31:45 +00:00
f9f73ef2ec
lantiq: fix ath9k eeprom loading order bug
...
https://dev.openwrt.org/ticket/14131
http://patchwork.openwrt.org/patch/4038/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38041
2013-09-18 16:31:41 +00:00
8ff756cdc9
lantiq: fix up default firmware selection for spanish and italian routers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38039
2013-09-18 16:31:32 +00:00
1878a3d6ab
lantiq: add v3.10 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
cd668944ef
lantiq: add wifi eep to a803 dts file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38030
2013-09-17 21:46:04 +00:00
18b76c66fb
lantiq: add a subtarget for the xrx200 SoC family
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38029
2013-09-17 21:46:00 +00:00
0782501483
lantiq: update dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38027
2013-09-17 21:45:50 +00:00
a0d6cd4f49
kernel/3.10: add new Kconfig option for firmware partition split
...
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.
The patch is in preparation for multiple firmware format
support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38002
2013-09-15 17:03:29 +00:00
94666dad1c
lantiq: fix TD-W8970 image generation to work with the new tool
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37727
2013-08-06 16:25:45 +00:00
d13cbb04ad
lantiq: add support for tplink images to .../image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37722
2013-08-06 12:31:25 +00:00
5001afdc37
lantiq: make the split patch recognize the tplink header
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37721
2013-08-06 12:31:20 +00:00
7f2eaac407
lantiq: fix TDW8970.dts commandline and partition name
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37720
2013-08-06 12:31:16 +00:00
e993e0c2cf
lantiq: add tplink header id to sysupgrade and fix a comment
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37719
2013-08-06 12:31:10 +00:00
27fa640548
lantiq: add (incomplete) support for Aztech GR7000
...
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
288adb6634
lantiq: several a803 related fixes
...
based on work from Matti Laasko that he posted in the wiki
Signed-off-by: John Crispin <blogic@openwrt.or
SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
b4c722267e
lantiq: fix VG3503J ethernet/gphy led support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37634
2013-08-01 14:30:40 +00:00
336c94c32d
lantiq: setup gphy leds on TPlink TDW8970
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37612
2013-07-29 13:10:42 +00:00
c3b5ee96b9
lantiq: add gphy pinmux definitions
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37611
2013-07-29 13:10:37 +00:00
61e6be686f
lantiq: set sane default for phy leds
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37610
2013-07-29 13:10:32 +00:00
73c4d73d6d
build: unify target independent optimization options
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
bfe65eaf7a
lantiq: remove stale phy register setup properties from dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37544
2013-07-25 20:54:51 +00:00
54b4074074
lantiq: add TP-Link TDW8970 image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37543
2013-07-25 20:29:24 +00:00
a2c5540727
lantiq: add profile for TP-Link TDW8970
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37542
2013-07-25 20:29:20 +00:00
a99042c6a4
lantiq: add devicetree for TP-Link TDW8970
...
Signed-of-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37541
2013-07-25 20:29:15 +00:00
313636c1e4
lantiq: fix initramfs image generation for lzmaloader based images
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37540
2013-07-25 20:29:10 +00:00
a4d31c0353
lantiq: make macs loadable from mtd partitions
...
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37539
2013-07-25 20:29:05 +00:00
32f7ae4ce6
lantiq: add a hook to make leds work on the secondary usb bus
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37538
2013-07-25 20:29:01 +00:00
4036be4408
lantiq: update pcie driver
...
This is an intermediate commit until the new OF driver is functional.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37537
2013-07-25 20:28:56 +00:00
6a5b4ec7dc
kernel: update 3.9 to 3.9.11
...
Also refresh 3.9 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37501
2013-07-22 15:30:56 +00:00
fc96e8e4b0
lantiq: update ralink wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37334
2013-07-15 11:06:07 +00:00
955662ec47
lantiq: apply [37258] also to the 3.9 kernel patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37317
2013-07-14 18:28:02 +00:00
93c4359512
lantiq: revert 36778 as it breaks irq assignment to pci devices
...
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37258
2013-07-11 21:16:34 +00:00
9de461f202
lantiq: etop enable gbit port0
...
Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37191
2013-07-08 07:11:59 +00:00
1a3ad5a037
lantiq: add device tree support for arv4519pw
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37178
2013-07-05 07:44:42 +00:00
14b6674b39
lantiq: fix initramfs
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37143
2013-07-03 09:17:15 +00:00
fdfbac75c2
lantiq: xrx200_net compile fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37126
2013-07-02 09:34:45 +00:00
0d9f760f27
kernel: update linux 3.9 to 3.9.8
...
Includes memory allocation fixes as well as several networking fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
124ef95f5f
lantiq: add v3.9 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37089
2013-06-29 18:16:56 +00:00
bfc7007226
lantiq: Add support for loading athxk eeproms through mtd
...
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 37087
2013-06-29 16:33:46 +00:00
fe8ecbd972
lantiq: fix kernel config for DEU support
...
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 37086
2013-06-29 16:33:37 +00:00
b4f36358ff
lantiq: make xrx200 network driver use a tasklet for rx housekeeping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37085
2013-06-29 16:33:28 +00:00
aff84655f5
lantiq: remove 3.7 kernel patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37084
2013-06-29 16:33:18 +00:00
44b1688e6c
lantiq: Tune the XWAY subtarget cflags
...
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 37006
2013-06-21 16:54:15 +00:00
5d441ae7ea
lantiq: set mips16 support.
...
Set mips16 support in XWAY subtarget.
This patch is based in changeset #36600
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37005
2013-06-21 16:54:07 +00:00
81c57ec131
lantiq: Fix ARV7518 DTS definitions
...
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 37004
2013-06-21 16:54:03 +00:00
76c79f50d7
lantiq: Fixes to athxk EEPROM loading
...
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36901
2013-06-10 08:25:12 +00:00
7638caf35d
lantiq: make kernel_oldconfig
...
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36900
2013-06-10 08:25:07 +00:00
f7daed8b9a
lantiq: diag.sh with both red and green power LEDs
...
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36899
2013-06-10 08:25:02 +00:00
da7590cd21
lantiq: fix formating in .dts files
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36882
2013-06-08 11:36:07 +00:00
1beaf031d1
target: don't build jffs2 nor images by default
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
e9ef65175d
lantiq: revert [36779] as it caused a regression
...
submitter was informed of a endinaess swap regression and replied with "works on my board"
revert the patch and make arv7518 wifi work again
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36807
2013-05-31 13:25:07 +00:00
e60cb01c45
lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
...
The GPIO buttons of ARV752DPW are active low.
Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.
This fixes: https://dev.openwrt.org/ticket/12642
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
SVN-Revision: 36783
2013-05-30 16:01:06 +00:00
c2b1e9eeef
lantiq: Fix ar8216 switch configuration
...
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36782
2013-05-30 16:00:59 +00:00
090a75447b
lantiq: DGN3500 support
...
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
d1f3751d05
lantiq: wifi calibration from MTD
...
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36779
2013-05-30 16:00:32 +00:00
83c3cd4ed9
lantiq: postpone PCI and wifi init
...
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36778
2013-05-30 16:00:24 +00:00
b585923cc9
lantiq: fix LED-handling oversights
...
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
eb10f052ce
lantiq: enable portmaps again and set max port to 2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36573
2013-05-07 10:58:52 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
b42a173664
lantiq: make leds and network work on VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
520bf46375
lantiq: fix board detection helpers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36444
2013-04-25 19:03:37 +00:00
157c86371f
lantiq: move dts files to thir own folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
9ae3adbe3c
lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36441
2013-04-25 19:03:25 +00:00
d3d18ae812
lantiq: make lzma-loader based images for VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
a46acc80e4
lantiq: update VG3503J.dts to match new partition layout
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
46306c2e47
lantiq: add lzma-loader source
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
d5f87e193c
add VG3503J support
...
this adds basic support. the bootloader on these units is locked down.
until we have a replacement we can do basic testing with these env variables in uboot.
set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000
unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.
please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
fbc1e3732b
add FE phy firmware
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36314
2013-04-11 19:17:48 +00:00
0d32469457
add missing pinmux patch
...
Fix lantiq pinmux which affected PCI and USB.
Known affected boards are: ARV4518 and ARV7518.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36312
2013-04-11 07:12:37 +00:00
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
d9bb7ff7a5
Migrate lantiq platform to common led helper functions
...
http://patchwork.openwrt.org/patch/3316/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
a4c745ee74
add a missing patch that makes board detection work again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
07532dca7f
kernel: update linux 3.8 to 3.8.3
...
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
4d5860cdd6
ACMP252: fix USB-enable GPIO and use default PCI configuration for now
...
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 36030
2013-03-14 18:43:54 +00:00
0dbe4f502d
fix buttons on vr9 eval kit
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36029
2013-03-14 18:43:49 +00:00
9b4a8c6d1e
select vdsl packages on vr9 boards
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36028
2013-03-14 18:43:44 +00:00
0f7f1f3347
fix fritzbox 3370 partitions/memory/cmdline
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36027
2013-03-14 18:43:39 +00:00
5452dbad61
build jffs images for nand based fritzbox
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36026
2013-03-14 18:43:34 +00:00
b98ae2b149
bump to v3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36014
2013-03-14 18:42:29 +00:00
3ab75692f3
move GPHY FW blobs to non versioned folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36013
2013-03-14 18:42:21 +00:00
48a4b3a0cd
fixes NO_XIP on CFI0001 flash
...
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 35992
2013-03-12 13:53:08 +00:00
e3a6ea65e1
add support for AudioCodes AC-252
...
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
0b881eea72
unbreak dgn3500 spi-gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35989
2013-03-12 13:52:47 +00:00
23b3b3a194
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
3f749d1e8e
kernel: update linux 3.7 to 3.7.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
162b8e23a5
kernel: update linux 3.7 to 3.7.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
bae4bfe3f8
kernel: update linux 3.7 to 3.7.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
08ff976720
kernel: update linux 3.7 to 3.7.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
562ba537fc
kernel: update linux 3.7 to 3.7.5
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
a0f7a3c214
dont load gptu on ase
...
fixes #12792
SVN-Revision: 35357
2013-01-28 17:46:07 +00:00
0de0955931
refresh patches
...
SVN-Revision: 35355
2013-01-28 17:44:20 +00:00
0183df8ed9
Fix ARV7518 USB
...
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/ ).
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
3534757bb9
Add ath9k eeprom and pci fixup support
...
Add ath9k eeprom and pci fixup support (again) for linux 3.7.
On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
5eb43d4cf8
Add support for ARV4518PW R01 and rename R01A.
...
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.
This fixes: https://dev.openwrt.org/ticket/12884
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
ed7ca5d44e
kernel: clean up crypto related kconfig options
...
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
15be1c9ee7
kernel: update linux 3.7 to 3.7.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
0de21d9747
kernel: update linux 3.7 to 3.7.3
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
c19c30cefd
kernel: update linux 3.7 to 3.7.2
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35100
2013-01-12 11:43:08 +00:00
64910f4490
fixes USB reset on ARV7518
...
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
4834d09a3f
fixes none-pci build
...
SVN-Revision: 35062
2013-01-09 09:04:09 +00:00
624eb36fff
adds missing symbol
...
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
ce57efa3ea
fixes usb port on arv 4518
...
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
41a039f464
mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
...
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
efe3225e2b
ar9 did not load atm driver properly
...
SVN-Revision: 34840
2012-12-22 10:16:52 +00:00
379cd6e25e
dont use input layer for gpio buttons
...
SVN-Revision: 34839
2012-12-21 20:04:20 +00:00
90a3761b0b
default switch setup for WBMR
...
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
ae0b9ff1ce
Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143 )
...
Tested only on the wbmr-hp-g300h, could affect/break other devices.
Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>
SVN-Revision: 34837
2012-12-21 20:04:04 +00:00
9818a1f00b
adds script to set wps info on boards with a wps button
...
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
3134205dfd
minor tweaks to WBMR image
...
SVN-Revision: 34835
2012-12-21 20:03:54 +00:00
f4b2439554
add missing PHY_BASIC_FEATURES to 100mbit phys
...
SVN-Revision: 34826
2012-12-21 14:41:35 +00:00
861bf6af49
fix typo inside fritz3370 devicetree file
...
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
54c096527a
more devicetree fixes
...
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
59cc6d9ddd
improve button handling
...
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
7ce4c81647
add phy-reset gpio handling to xrx200-net
...
SVN-Revision: 34822
2012-12-21 13:47:44 +00:00
42d668174e
add more lantiq phy ids based on daniels uboot code
...
SVN-Revision: 34821
2012-12-21 13:47:40 +00:00
16c5946f8b
refresh patch and install v1.1 gphy blobs
...
SVN-Revision: 34820
2012-12-21 13:47:35 +00:00
1b0aaff246
adds a fix for ar8216 mii detection on etop driver
...
SVN-Revision: 34795
2012-12-19 16:20:24 +00:00
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
687920ba3e
minor basefiles fixes
...
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
e472671bde
fix gptu clocks
...
SVN-Revision: 34789
2012-12-19 15:17:31 +00:00
5495ffbfdf
more board file fixes
...
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
4aa8272c8b
fix gptu patch - tapi should now load
...
SVN-Revision: 34777
2012-12-18 20:12:57 +00:00
af48676b28
update to 3.7.1
...
SVN-Revision: 34771
2012-12-18 19:32:01 +00:00
7bcb6b5479
make pinctrl-falcon honour status="disbaled";
...
SVN-Revision: 34714
2012-12-16 10:03:28 +00:00
573cf13419
fix falcon profile
...
SVN-Revision: 34713
2012-12-16 10:03:23 +00:00
33d3433d75
fix i2c-lantiq module
...
SVN-Revision: 34712
2012-12-16 10:03:18 +00:00
b637eb598d
add falcon devicetree files
...
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
3ca51b5399
select hcd as a default package for the dgn3500
...
SVN-Revision: 34702
2012-12-15 11:01:16 +00:00
John Crispin
Felix Fietkau
Gabor Juhos
Luka Perkov
Jonas Gorski
Steven Barth
Jo-Philipp Wich
Mirko Vogt