eaa3e9ec6e
brcm63xx: add support for BCM963269BHR board
...
Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39363
2014-01-21 18:50:11 +00:00
fed4b02a68
brcm63xx: improve BCM63268 support
...
Allow using the HSSPI controller since it works just fine, as well as
the integrated switch core, since that one works too.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39362
2014-01-21 18:49:50 +00:00
0b599c51cc
ar71xx: mynet-n750: define LEDs connected to the AR8327 switch
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4743/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39361
2014-01-21 17:17:42 +00:00
f3c07b8621
modules: swconfig.c: update the error path on 3.13, and behave nicely with return
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39360
2014-01-21 14:43:50 +00:00
4d26250db1
modules: update swconfig.c to compile on 3.13 (compile-tested)
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39359
2014-01-21 14:24:45 +00:00
a7a890d9e8
add missing symbols
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39358
2014-01-21 14:23:00 +00:00
d5b4292032
kernel: ocf: add missing dependency for hifn driver
...
The HIFN driver is a PCI driver, thus requires PCI support to be enabled
to compile. Therefore let it depend on PCI..
Should fix mvebu builds.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39357
2014-01-21 12:11:18 +00:00
384a662e05
lantiq: fix unaligned access in vdsl firmware extractor
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39356
2014-01-21 09:51:16 +00:00
7ee639a81c
add missing symbols
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39355
2014-01-21 07:53:11 +00:00
1f4e6394ed
b53: use drvdata to store driver data
...
we should not abuse the platform_data pointer.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39354
2014-01-20 20:01:22 +00:00
de266cd1c1
b53: make b53_switch_reset_gpio() static
...
SVN-Revision: 39353
2014-01-20 19:07:18 +00:00
58dc9f593b
procd: update to latest git head
...
Fixes OpenWrt bug #14832
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39352
2014-01-20 18:42:58 +00:00
229d186490
netifd: don't add unnecessary NOP policy rules
...
SVN-Revision: 39351
2014-01-20 18:23:02 +00:00
2cf8391b75
update ocf patches - as ENT_DEBUG is removed, move the messages into pr_notice
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39350
2014-01-20 15:23:27 +00:00
c89e789913
update/fixup overlayfs patch
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39349
2014-01-20 14:46:29 +00:00
6bd1a37001
add initial 3.13 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39348
2014-01-20 13:56:24 +00:00
c67ec51c85
6in4: fix typo in config variable ( fixes #14830 )
...
SVN-Revision: 39347
2014-01-20 12:53:15 +00:00
506b40b628
ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39346
2014-01-20 10:23:06 +00:00
c17cfab560
ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39345
2014-01-20 10:23:05 +00:00
db5f22a2d7
ar71xx: set default LED config for the RB2011* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39344
2014-01-20 10:23:04 +00:00
927809e59b
ar71xx: set status_led for the RB2011* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39343
2014-01-20 10:23:03 +00:00
07f76a164a
ar71xx: fix indentation in diag.sh
...
Replace the leading spaces with tabs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39342
2014-01-20 10:23:02 +00:00
4c54635106
ar71xx: rb2011: define LEDs connected to the AR8327 switch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39341
2014-01-20 10:23:01 +00:00
31d6ad289f
ar71xx: enable AR8327 LED support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39340
2014-01-20 10:23:00 +00:00
2d28a07df7
kernel/3.1[02]: add AR8216_PHY_LEDS option
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39339
2014-01-20 10:22:59 +00:00
0056ac55af
generic: ar8216: add custom LED support for the AR8327 switch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39338
2014-01-20 10:22:56 +00:00
15d41de1eb
generic: ar8216: allow to use chip specific cleanup callback
...
It will be used for AR8327.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39337
2014-01-20 10:22:55 +00:00
c7652f1f9e
generic: ar8216: add optimized rmw operation
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39336
2014-01-20 10:22:54 +00:00
b4dc45e07d
ar71xx: rb2011: fix eth5 LED
...
The eth5 LED on the RB2011 is not working because the
LED control rule is missing. Fix it.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39335
2014-01-20 10:22:49 +00:00
1de0eac947
ubox: update to latest git head
...
adds option to set internal buffer size
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39333
2014-01-19 19:10:09 +00:00
fac5e62abd
firewall: don't reload if there were no address or data changes
...
This fixes packet loss due to reloading firewall every minute with IPv6
implementation of certain ISPs.
SVN-Revision: 39332
2014-01-19 17:35:33 +00:00
33dc3f2488
kernel: add usb3 module definitions
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39331
2014-01-19 17:27:40 +00:00
ebaa3817a7
ralink: activate xhci config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39330
2014-01-19 17:27:31 +00:00
a818a3cf8f
ralink: backport various fixes from linux-mti
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39329
2014-01-19 17:27:22 +00:00
a75b692557
ralink: add xhci driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39328
2014-01-19 17:27:13 +00:00
2f5f498969
scripts/kconfig.pl: Indicate which file we couldn't open
...
Signed-off-by: Daniel Colascione <dancol@dancol.org>
SVN-Revision: 39327
2014-01-19 17:27:04 +00:00
d513c07d2f
brcm63xx: fix typo breaking build in r39325
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39326
2014-01-19 14:00:18 +00:00
66ec204935
brcm63xx: set usb host port number for some devices
...
Update a few devices with their actual port numbers, especially those
with two ports.
Should allow properly using the second port on the Neufboxen and HW553
and HW556.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39325
2014-01-19 13:46:25 +00:00
ef81c6a268
brcm63xx: allow setting the number of usb host ports for boards
...
Allow setting the number of available usb host ports for boards with
additional sanity checks to allow using the second port on devices
where it is available.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39324
2014-01-19 13:46:14 +00:00
6b3e1c8de6
brcm63xx: add USB support for BCM63268
...
Add and enable USB support for the BCM63268 family of SoCs.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39323
2014-01-19 13:46:05 +00:00
33f426c795
brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI too
...
USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI
and BCM63XX_HAS_OHCI are not selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39322
2014-01-19 13:45:55 +00:00
52b7f55cb3
brcm63xx: prevent usb clock state inconsistency on BCM6318
...
Return the same clock for usbh and usbd on BCM6318 to prevent the clock
getting disabled despite being supposed to be enabled, e.g. by the
following sequence:
clk_enable(usbh); <- usbh->usage = 1, enabled
clk_enable(usbd); <- usbd->usage = 1, enabled (no effect)
clk_disable(usbd); <- usbd->usage = 0, -> disabled!
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
b6e1cbd8dd
generate images for the On Networks N150 (rebranded Netgear WNR612v2)
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39320
2014-01-18 19:44:40 +00:00
471095f869
odhcpd: Fix a memory corruption when static leases are used
...
SVN-Revision: 39319
2014-01-18 10:11:03 +00:00
f18112883f
sysupgrade: do not kill any processes in failsafe
...
sysugrade killed the lock causing failsafe to stop
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39318
2014-01-17 22:12:05 +00:00
63a4342568
usbmode: update usb-modeswitch-data version to 20131113
...
https://dev.openwrt.org/ticket/14762
Signed-off-by: Alif M. Ahmad <ama_alif@yahoo.co.id>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39317
2014-01-17 21:45:55 +00:00
cd90b6242c
ubox: update to latest git
...
- fix duplicate device wildcard
- fix elf 64bit elf parsing
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39316
2014-01-17 21:35:32 +00:00
24ba434185
odhcpd: be even less verbose and don't start unnecessary relays
...
SVN-Revision: 39315
2014-01-17 19:05:54 +00:00
2c9d868900
odhcpd: fix logspam
...
SVN-Revision: 39314
2014-01-17 15:53:43 +00:00
17b0d874eb
odhcpd: use hybrid management mode by default
...
SVN-Revision: 39313
2014-01-17 15:48:02 +00:00
Florian Fainelli
Gabor Juhos
Zoltan Herpai
Jonas Gorski
John Crispin
Hauke Mehrtens
Steven Barth
Imre Kaloz