Commit Graph

7895 Commits (da628121b079927c72191f6066dfa3fb70bd4163)

Author SHA1 Message Date
Michael Büsch b058e97af4 n810: Add xmodmap to profile
SVN-Revision: 29193
2011-11-16 19:01:19 +00:00
Florian Fainelli 8d66465b08 include bridge and 8021q modules by default
SVN-Revision: 29164
2011-11-15 22:24:22 +00:00
John Crispin bbe96f13a6 lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
John Crispin 79a4642b40 lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
2011-11-14 18:55:58 +00:00
Gabor Juhos f27548448b ar71xx: fix USB LED on the DB120 board
SVN-Revision: 29126
2011-11-14 17:43:15 +00:00
Gabor Juhos 6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin
SVN-Revision: 29125
2011-11-14 17:43:14 +00:00
Gabor Juhos 0c1d3617d7 ar71xx: fix GPIO function handling on AR934x
SVN-Revision: 29124
2011-11-14 17:43:13 +00:00
Gabor Juhos aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
SVN-Revision: 29123
2011-11-14 17:43:11 +00:00
Gabor Juhos 62a7795afd ar71xx: merge nand scan patch
SVN-Revision: 29122
2011-11-14 17:43:10 +00:00
Gabor Juhos 12dae96097 ar71xx: fix a compiler warning
SVN-Revision: 29110
2011-11-14 13:07:47 +00:00
Gabor Juhos 5ae0fd802c ar71xx: fix GPIO count for AR934x
SVN-Revision: 29109
2011-11-14 13:07:45 +00:00
Gabor Juhos e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
SVN-Revision: 29108
2011-11-14 11:49:53 +00:00
Gabor Juhos 3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
SVN-Revision: 29107
2011-11-14 11:49:51 +00:00
Gabor Juhos 42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
SVN-Revision: 29106
2011-11-14 11:49:49 +00:00
Gabor Juhos c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init
SVN-Revision: 29105
2011-11-14 11:49:47 +00:00
Gabor Juhos cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files
SVN-Revision: 29103
2011-11-14 07:38:09 +00:00
Gabor Juhos defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
SVN-Revision: 29102
2011-11-14 07:38:07 +00:00
Gabor Juhos 6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
SVN-Revision: 29101
2011-11-14 07:38:05 +00:00
Florian Fainelli 7f787707de build images for Pirelli A226M (#10409)
SVN-Revision: 29045
2011-11-13 19:19:22 +00:00
Florian Fainelli 5dc2098448 register uart0 on DWV-S0 boards (#10409)
SVN-Revision: 29044
2011-11-13 19:19:18 +00:00
Florian Fainelli 56a96ba876 refresh 3.0 patches
SVN-Revision: 29043
2011-11-13 19:19:14 +00:00
Florian Fainelli 54da5cf11f refresh 2.6.39 patches
SVN-Revision: 29042
2011-11-13 19:19:10 +00:00
Florian Fainelli 717a4391d7 rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
SVN-Revision: 29041
2011-11-13 19:19:05 +00:00
Florian Fainelli c093c9df34 fix typo, load ip17xx switch module
SVN-Revision: 29039
2011-11-13 18:41:26 +00:00
Gabor Juhos 368bbc510b ar71xx: enable has_gbit flag on AR724{0,1}
SVN-Revision: 29026
2011-11-13 17:36:36 +00:00
Gabor Juhos 15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board
SVN-Revision: 29022
2011-11-13 12:48:03 +00:00
Gabor Juhos f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
SVN-Revision: 29021
2011-11-13 12:48:01 +00:00
Gabor Juhos d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status
SVN-Revision: 29017
2011-11-13 11:27:04 +00:00
Gabor Juhos d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices
SVN-Revision: 29016
2011-11-13 11:27:03 +00:00
Gabor Juhos 34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
SVN-Revision: 29015
2011-11-13 11:27:01 +00:00
Gabor Juhos 2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines
SVN-Revision: 29014
2011-11-13 11:27:00 +00:00
Gabor Juhos 538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks
SVN-Revision: 29013
2011-11-13 11:26:59 +00:00
Gabor Juhos 93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.

SVN-Revision: 29012
2011-11-13 11:26:57 +00:00
Gabor Juhos 9579bb4267 ar71xx: ag71xx: remove MII interface setup code
SVN-Revision: 29011
2011-11-13 11:26:56 +00:00
Gabor Juhos da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
SVN-Revision: 29010
2011-11-13 11:26:54 +00:00
Gabor Juhos 0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
2011-11-13 11:26:52 +00:00
Gabor Juhos 1afc76ea13 ar71xx: refresh kernel patches
SVN-Revision: 29008
2011-11-13 11:26:51 +00:00
Jonas Gorski d8acb75009 linux: update 3.1 to 3.1.1
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
John Crispin a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin 832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin 5dcbbf0160 lantiq: rename leds
SVN-Revision: 29002
2011-11-12 23:40:12 +00:00
John Crispin d84b7596d9 lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
2011-11-12 23:40:07 +00:00
John Crispin 2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
John Crispin 3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
John Crispin 4248705108 lantiq: cleanup default package selection
SVN-Revision: 28998
2011-11-12 23:39:51 +00:00
John Crispin eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
SVN-Revision: 28994
2011-11-12 18:41:15 +00:00
Gabor Juhos bbfaaeffd6 kernel: ar8216: add support for the AR8236 switch
SVN-Revision: 28993
2011-11-12 14:09:52 +00:00
Gabor Juhos ecb3690d0a kernel: ar8216: move port vlan setup into a separate function
SVN-Revision: 28992
2011-11-12 14:09:50 +00:00
Gabor Juhos 5ad763075e ar71xx: use the button for WPS control on the DB120
SVN-Revision: 28990
2011-11-12 12:50:20 +00:00
Gabor Juhos 4555be2bec ar71xx: register the second ethernet interface on the DB120 board
SVN-Revision: 28989
2011-11-12 12:50:19 +00:00
Gabor Juhos 368c6605a0 ar71xx: implement SoC specific phy interface setup
SVN-Revision: 28988
2011-11-12 12:50:18 +00:00
Gabor Juhos 21d317b9cc ar71xx: move phy interface setup into a separate function
SVN-Revision: 28987
2011-11-12 12:50:16 +00:00
Gabor Juhos aff0c84ffa ar71xx: register both MDIO bus on the DB120 board
SVN-Revision: 28986
2011-11-12 12:09:59 +00:00
Gabor Juhos b144249108 ar71xx: add AR934X specific MDIO registration code
SVN-Revision: 28985
2011-11-12 12:09:56 +00:00
Gabor Juhos f835106c8c ar71xx: add a secondary mdio bus
SVN-Revision: 28984
2011-11-12 12:09:54 +00:00
Gabor Juhos 90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
SVN-Revision: 28983
2011-11-12 12:09:50 +00:00
Gabor Juhos 9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio
SVN-Revision: 28982
2011-11-12 12:09:48 +00:00
Gabor Juhos b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
SVN-Revision: 28981
2011-11-12 12:09:42 +00:00
Gabor Juhos a9216bb76e ar71xx: add AR934x specific USB setup
SVN-Revision: 28980
2011-11-12 10:54:20 +00:00
Gabor Juhos 346e44105a ar71xx: register the first ethernet interface on the DB120 board
SVN-Revision: 28979
2011-11-12 10:54:18 +00:00
Gabor Juhos b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X
SVN-Revision: 28978
2011-11-12 10:54:17 +00:00
Gabor Juhos 2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
SVN-Revision: 28977
2011-11-12 10:54:16 +00:00
Gabor Juhos e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits
SVN-Revision: 28976
2011-11-12 10:54:15 +00:00
Gabor Juhos d461fdd519 ar71xx: add diag support for the DB120 board
SVN-Revision: 28975
2011-11-12 10:54:10 +00:00
Gabor Juhos d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x
SVN-Revision: 28974
2011-11-12 10:54:09 +00:00
Gabor Juhos 43e993e5f5 ar71xx: fix AR934X clock frequency calculation
SVN-Revision: 28973
2011-11-12 10:54:08 +00:00
Gabor Juhos 8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
2011-11-12 10:54:04 +00:00
John Crispin fda4ee22a0 lantiq: improve falcon package selection
SVN-Revision: 28962
2011-11-11 21:59:11 +00:00
John Crispin e1dc73be90 lantiq: fix breakage introduced in 3.1 bump
SVN-Revision: 28961
2011-11-11 21:59:01 +00:00
Jo-Philipp Wich be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
Jonas Gorski f53128f79b target: linux: mtd: fix MTDREFRESH to an arbitrary high number
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

SVN-Revision: 28893
2011-11-09 21:16:36 +00:00
Felix Fietkau 7a2efd8c28 ar71xx: remove dead code
SVN-Revision: 28851
2011-11-08 00:33:20 +00:00
Felix Fietkau 94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask
SVN-Revision: 28850
2011-11-08 00:33:15 +00:00
Felix Fietkau b06efd636a kernel: add a top level menuconfig option for enabling lockdep
SVN-Revision: 28848
2011-11-08 00:32:57 +00:00
Gabor Juhos 87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults
SVN-Revision: 28833
2011-11-07 21:44:24 +00:00
Gabor Juhos 09fdfa444f ar71xx: create ALL0258N network config from uci-defaults
SVN-Revision: 28832
2011-11-07 21:44:23 +00:00
Gabor Juhos 63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults
SVN-Revision: 28831
2011-11-07 21:44:20 +00:00
Gabor Juhos c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults
SVN-Revision: 28830
2011-11-07 21:44:17 +00:00
Gabor Juhos ee1a07a11d ar71xx: create RB-493G network config from uci-defaults
SVN-Revision: 28829
2011-11-07 21:44:12 +00:00
Gabor Juhos d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults
SVN-Revision: 28828
2011-11-07 21:44:11 +00:00
Gabor Juhos 68be590894 ar71xx: create WRT160NL network config from uci-defaults
SVN-Revision: 28827
2011-11-07 21:44:09 +00:00
Gabor Juhos 83901e47c9 ar71xx: create PB92 network config from uci-defaults
SVN-Revision: 28826
2011-11-07 21:44:08 +00:00
Gabor Juhos 22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults
SVN-Revision: 28825
2011-11-07 21:44:07 +00:00
Gabor Juhos e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults
SVN-Revision: 28824
2011-11-07 21:44:03 +00:00
Gabor Juhos 9298c7afe5 ar71xx: create RB-450 network config from uci-defaults
SVN-Revision: 28823
2011-11-07 21:44:02 +00:00
Gabor Juhos ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults
SVN-Revision: 28822
2011-11-07 21:44:01 +00:00
Gabor Juhos 944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults
SVN-Revision: 28821
2011-11-07 21:43:58 +00:00
Gabor Juhos 6e8390ae6c ar71xx: create even more network configs from the uci-defaults script
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
2011-11-07 21:43:56 +00:00
Gabor Juhos b62560413a ar71xx: create more network configs from the uci-defaults script
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
2011-11-07 21:43:54 +00:00
Gabor Juhos 6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
2011-11-07 21:43:52 +00:00
Gabor Juhos 0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script
SVN-Revision: 28817
2011-11-07 21:43:51 +00:00
Gabor Juhos 54c034ae7a ar71xx: remove AP81 defconfig, it is the same as the generic config
SVN-Revision: 28816
2011-11-07 21:34:33 +00:00
Gabor Juhos 5b6cc3eb9f ar71xx: change generated Buffalo firmware versions
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

SVN-Revision: 28815
2011-11-07 21:34:32 +00:00
Imre Kaloz cc2cf8f3d5 update 3.1 patches
SVN-Revision: 28814
2011-11-07 21:13:13 +00:00
Imre Kaloz c4bc2552a3 update arm mach-types
SVN-Revision: 28813
2011-11-07 21:12:26 +00:00
Gabor Juhos eb9ef60e2d ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards
SVN-Revision: 28812
2011-11-07 20:25:00 +00:00
Gabor Juhos 8456840d82 ar71xx: wrap long lines in the upgrade script
SVN-Revision: 28811
2011-11-07 20:24:59 +00:00
Gabor Juhos c60baf78ce ar71xx: fix WHR-HP-G300N firmware partition offset
SVN-Revision: 28810
2011-11-07 20:24:57 +00:00
Gabor Juhos b27254a2c5 ar71xx: add default network configuration for the WHR-HP-GN
SVN-Revision: 28807
2011-11-07 13:32:43 +00:00
Gabor Juhos 034b2b7cde ar71xx: build image for the Buffalo WHR-HP-GN
SVN-Revision: 28806
2011-11-07 12:59:11 +00:00
Gabor Juhos a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board
SVN-Revision: 28805
2011-11-07 12:59:10 +00:00
Gabor Juhos 0d9ae0a036 ar71xx: build image for the Buffalo WHR-G301N
SVN-Revision: 28804
2011-11-07 12:59:08 +00:00
Gabor Juhos 4509af17ed ar71xx: add support for the Buffalo WHR-G301N board
SVN-Revision: 28803
2011-11-07 12:59:07 +00:00
Gabor Juhos 63784ea2bc ar71xx: fix WHR-HP-G300N image generation
SVN-Revision: 28802
2011-11-07 12:59:05 +00:00
Gabor Juhos b3b21cb3bf ar71xx: enable WHR-HP-G300N support in kernel config
SVN-Revision: 28801
2011-11-07 12:59:04 +00:00
Gabor Juhos 4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions
SVN-Revision: 28800
2011-11-07 12:59:03 +00:00
Michael Büsch 05ce57c005 omap24xx: Add cbus tahvo locking fix.
SVN-Revision: 28767
2011-11-05 16:10:18 +00:00
Michael Büsch 6288ac7ed4 omap24xx: Fix n810bm compilation
SVN-Revision: 28766
2011-11-05 16:01:53 +00:00
Gabor Juhos 297ac9a7f1 kernel: swconfig: add a missing unlock in error path
SVN-Revision: 28753
2011-11-04 14:38:31 +00:00
Jo-Philipp Wich d6f02b62d4 add timeserver config to target specific system configs as well
SVN-Revision: 28750
2011-11-04 12:53:35 +00:00
Felix Fietkau 82bd0a43f1 kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar)
SVN-Revision: 28734
2011-11-03 20:02:31 +00:00
John Crispin 95d36d3efe lantiq: remove obseleted folder. we use 3.1 now
SVN-Revision: 28728
2011-11-03 16:33:27 +00:00
John Crispin ea36ad76bc lantiq: bump to 3.1
SVN-Revision: 28721
2011-11-03 15:15:52 +00:00
Gabor Juhos 4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4
SVN-Revision: 28709
2011-11-01 14:38:12 +00:00
Gabor Juhos fc8adbb854 ar71xx: build image for the TL-WR741ND v4 board
SVN-Revision: 28708
2011-11-01 11:20:55 +00:00
Gabor Juhos 91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
2011-11-01 11:20:52 +00:00
Gabor Juhos 21e651c9a1 ar71xx: add AR933X GMAC register defines
SVN-Revision: 28705
2011-11-01 11:20:50 +00:00
Gabor Juhos 43e2e2e4ef ar71xx: combine LEDs setup in one file
SVN-Revision: 28704
2011-11-01 11:20:49 +00:00
Gabor Juhos f372620ffa ar71xx: unify LED names on Planex boards
SVN-Revision: 28703
2011-11-01 11:20:47 +00:00
Gabor Juhos 66ab406d5a ar71xx: unify LED names on Buffalo boards
SVN-Revision: 28702
2011-11-01 11:20:46 +00:00
Gabor Juhos e7586959df ar71xx: unify LED names on TP-Link boards
SVN-Revision: 28701
2011-11-01 11:20:44 +00:00
Gabor Juhos 3a7b12a27d ar71xx/all0258n: sysupgrade support
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28700
2011-11-01 09:23:32 +00:00
Gabor Juhos f40557a692 ar71xx/all0258n: add default config
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28699
2011-11-01 09:23:31 +00:00
Gabor Juhos 06d9653b36 ar71xx: remove default network config of the mzk-w04nu board as well
It works with the generic config.

SVN-Revision: 28695
2011-11-01 09:23:25 +00:00
Gabor Juhos 693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750
SVN-Revision: 28693
2011-10-31 14:26:56 +00:00
Gabor Juhos 2bcd612e72 ar71xx: remove default network config of the wnr2000 board
It is the same as the generic configuration.

SVN-Revision: 28692
2011-10-31 14:26:51 +00:00
Vasilis Tsiligiannis 17ccd4aec4 rt305x: Create factory image for Fonera 2.0n
SVN-Revision: 28689
2011-10-31 09:23:44 +00:00
Michael Büsch 29958120a2 omap24xx: Default to linux-3.1
SVN-Revision: 28687
2011-10-30 22:42:00 +00:00
Michael Büsch c00fd42353 omap24xx: Fix n810 LCD initialization
SVN-Revision: 28685
2011-10-30 20:31:45 +00:00
Michael Büsch f37c24d35f omap24xx: Fix n810 boot
SVN-Revision: 28683
2011-10-30 18:46:45 +00:00
Gabor Juhos 39b3bfcf6a ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28678
2011-10-30 13:06:30 +00:00
Michael Büsch fd0e6e1452 omap24xx: Refresh 3.1 config
SVN-Revision: 28677
2011-10-29 22:52:44 +00:00
Michael Büsch ba9ee13744 omap24xx: Refresh 3.1 patches
SVN-Revision: 28676
2011-10-29 22:52:07 +00:00
Michael Büsch e184bfe6f0 Fix tusb patch
SVN-Revision: 28675
2011-10-29 22:33:59 +00:00
Michael Büsch a3db2f2055 omap24xx: Fix MUSB compile
SVN-Revision: 28674
2011-10-29 22:26:27 +00:00
Michael Büsch 5dde93038f omap24xx: Add n800 touchscreen and keypad drivers. Thanks to Marat Radchenko.
SVN-Revision: 28673
2011-10-29 20:35:36 +00:00
Michael Büsch 7d123a86e3 omap24xx: Add 3.1 patchset.
SVN-Revision: 28672
2011-10-29 19:02:50 +00:00
Gabor Juhos 415814f051 ar71xx: fix typos in image/Makefile
SVN-Revision: 28618
2011-10-27 07:54:52 +00:00
Gabor Juhos 1646346798 ar71xx: add initial support for the OpenMesh OM2P board
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
2011-10-27 07:54:51 +00:00
Gabor Juhos d02f22fea1 ar71xx/all0258n: fix partition layout
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
2011-10-27 07:54:47 +00:00
Michael Büsch f15f6bc76f Update my email address
SVN-Revision: 28603
2011-10-26 14:54:26 +00:00
Felix Fietkau b17bfe4f68 x86: disable crashlog, ioremap of RAM does not work properly here
SVN-Revision: 28599
2011-10-26 11:49:25 +00:00
Gabor Juhos 4a70cace09 ar71xx: create image for the WNDR3800
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 28597
2011-10-26 06:12:47 +00:00
Jo-Philipp Wich 3d1d93cb0c target: remove CONFIG_IDE_PROC_FS support as well
SVN-Revision: 28586
2011-10-25 16:40:06 +00:00
Jo-Philipp Wich de7cae82e9 brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit
SVN-Revision: 28585
2011-10-25 16:19:52 +00:00
Jo-Philipp Wich a9e64493d8 target: globally disable BSD process accounting
SVN-Revision: 28584
2011-10-25 16:18:36 +00:00
Gabor Juhos ee8077f0fe ramips: Support for NexAira BC2
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
Gabor Juhos 18452a753b ramips: fix switch-port assignment for HW550-3G
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
Gabor Juhos 68a01c0180 ramips: combine led setup for all boards in one file
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
Gabor Juhos c8b9086ac5 ar71xx: build image for the Buffalo WHR-HP-G300N
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28568
2011-10-24 21:49:29 +00:00
Gabor Juhos 9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
2011-10-24 21:49:26 +00:00
Gabor Juhos 0ab6be2ba3 ar71xx: build image for the Allnet ALL0258N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28565
2011-10-24 21:49:23 +00:00
Gabor Juhos d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
2011-10-24 21:49:21 +00:00
Gabor Juhos ef41e0a61c ar71xx: don't override CONFIG_FSNOTIFY
SVN-Revision: 28563
2011-10-24 21:49:18 +00:00
Jo-Philipp Wich b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275)
SVN-Revision: 28562
2011-10-24 21:35:43 +00:00
Nicolas Thill b0d9bccafc x86: allow VDI & VMDK images for all subtargets (closes: #10255)
SVN-Revision: 28518
2011-10-22 13:09:15 +00:00
Jonas Gorski 40d088446f linux: generic: refresh patches for 3.1-rc10
Hopefully the last one and identical to final.

SVN-Revision: 28492
2011-10-20 10:32:44 +00:00
Jonas Gorski a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G
SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
Jonas Gorski 03f91068d1 ar71xx: add a workaround for ar8316 not always driving the TA bit to low
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

SVN-Revision: 28422
2011-10-11 23:05:13 +00:00
Jonas Gorski b7a2a74823 ar8216: use mdiobus_{read,write} to ensure proper locking
SVN-Revision: 28421
2011-10-11 23:05:10 +00:00
John Crispin 0a866293bd * update patches to 3.0
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

SVN-Revision: 28405
2011-10-10 15:13:46 +00:00
Jonas Gorski c674c874b7 ag71xx: close a race between the phy state machine and link state
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
2011-10-08 11:37:14 +00:00
Jo-Philipp Wich ce5e1abbb7 add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver
SVN-Revision: 28376
2011-10-06 18:23:16 +00:00
Florian Fainelli 829ae01f16 add missing kernel config symbols
SVN-Revision: 28363
2011-10-04 09:15:37 +00:00
Daniel Dickinson b0345ef184 Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17
SVN-Revision: 28357
2011-10-03 04:39:54 +00:00
Daniel Dickinson c0a625ffbf Add patch for linux-3.0 as well.
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

SVN-Revision: 28356
2011-10-03 03:09:20 +00:00
Daniel Dickinson 7e372b6dcf New x86 platform specific symbol needed for 3.1-rc3. 2011-10-03 03:06:29 +00:00
Daniel Dickinson 541aa8e38e A lot of these options get set automatically when Geode is selected.
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

SVN-Revision: 28353
2011-10-03 03:02:42 +00:00
Florian Fainelli 3802769ea1 add vlan definitions for Siemens SE505v2
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

SVN-Revision: 28336
2011-09-30 12:55:33 +00:00
John Crispin aecc73de77 The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code.
SVN-Revision: 28310
2011-09-26 10:35:51 +00:00
John Crispin 1ef8066bff * remove obseleted m25p80 patch
SVN-Revision: 28309
2011-09-26 09:36:02 +00:00
John Crispin cf59e7255d * rebase 3.0 patches * fold some fixes into existing patches
SVN-Revision: 28308
2011-09-26 09:35:02 +00:00
Gabor Juhos 6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board
Patch-by: Lukas Kuna

SVN-Revision: 28295
2011-09-23 19:56:39 +00:00
Gabor Juhos e45d7d7006 ar71xx: enable login only on the system console by default
SVN-Revision: 28294
2011-09-23 19:56:38 +00:00
Alexandros C. Couloumbis 5fc14dfb87 linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure)
SVN-Revision: 28293
2011-09-23 10:00:13 +00:00
Gabor Juhos 49ac36e818 ar71xx: build images for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28279
2011-09-21 11:47:56 +00:00
Gabor Juhos 733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
Gabor Juhos d3617ac7d3 ar71xx: add AR933x specific USB setup function
SVN-Revision: 28276
2011-09-21 11:47:51 +00:00
Gabor Juhos 91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper
SVN-Revision: 28275
2011-09-21 11:47:50 +00:00
Gabor Juhos 9fa51d5c38 ar71xx: fix copy&paste bug in WZRHPAG300H profile description
SVN-Revision: 28274
2011-09-21 11:47:48 +00:00
Gabor Juhos 079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries
SVN-Revision: 28273
2011-09-21 11:47:47 +00:00
Gabor Juhos 73dac07c44 ar71xx: sort AR71XX_MACH_* entries
SVN-Revision: 28272
2011-09-21 11:47:45 +00:00
Gabor Juhos ef2431c8d9 ar71xx: create image for the TP-Link TL-WR743ND v1
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 28271
2011-09-21 11:47:44 +00:00
Gabor Juhos 76d0d1a837 ar71xx: create image for the TP-Link TL-WR740N v3
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

SVN-Revision: 28269
2011-09-21 11:47:40 +00:00
Gabor Juhos 93c093057d generic: jumbo frames support for rtl8366s
This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.

I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.

Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>

SVN-Revision: 28267
2011-09-21 11:47:38 +00:00
Jo-Philipp Wich 34f2cfc657 fix generation for arm platforms Based on patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28225
2011-09-13 07:39:14 +00:00
Felix Fietkau 1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)
SVN-Revision: 28213
2011-09-11 17:44:12 +00:00
Jo-Philipp Wich 1e24383ae6 Various enhancements from Manuel Munz <freifunk@somakoma.de> - don't regenerate Package index unless the packagedir changes - remove opkg lists from rootfs, saves > 1MB uncompressed - don't direct errors on index creation into packagelist
SVN-Revision: 28205
2011-09-09 17:25:20 +00:00
Jo-Philipp Wich ba46c7b3c6 Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz
SVN-Revision: 28197
2011-09-08 22:18:26 +00:00
Felix Fietkau 65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037)
SVN-Revision: 28182
2011-09-06 05:38:23 +00:00
Felix Fietkau de8cabe839 ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954)
SVN-Revision: 28173
2011-09-05 18:37:48 +00:00
Imre Kaloz ed2c8bdc92 upgrade testing kernel support to 3.1
SVN-Revision: 28165
2011-09-04 15:06:05 +00:00
Imre Kaloz 4f0b1a6602 cleanup config
SVN-Revision: 28164
2011-09-04 15:02:37 +00:00
Imre Kaloz 0569cff6e1 refresh patches
SVN-Revision: 28163
2011-09-04 15:01:56 +00:00
Imre Kaloz 6d17e13cde add missing symbols
SVN-Revision: 28162
2011-09-04 15:01:25 +00:00
Felix Fietkau 24dfe525c2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default
SVN-Revision: 28125
2011-08-29 21:23:51 +00:00
Felix Fietkau cd2c68501c ar71xx: fix ethernet PLL setting on ar7242
SVN-Revision: 28124
2011-08-29 21:23:46 +00:00
Hamish Guthrie cc037a5e27 Remove subpage align patch
SVN-Revision: 28086
2011-08-25 11:49:55 +00:00
Hamish Guthrie 21f7943561 Re-order patches, add nand sub-page alignment
SVN-Revision: 28084
2011-08-25 10:37:30 +00:00
Florian Fainelli cbd28ad0ec bump to 2.6.39.4
Since linux gets developed on x86 more than all other hardware,
hardly makes sense to have our default x86 version be trailing
by over a year.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28082
2011-08-25 09:35:51 +00:00
Florian Fainelli d2652dee9d update alix2 platform driver
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28081
2011-08-25 09:35:45 +00:00
Jonas Gorski 71adaae258 kernel: add two missing config symbols for 3.1
SVN-Revision: 28080
2011-08-24 11:43:25 +00:00
Gabor Juhos 72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
Gabor Juhos 4b96d3af2a ramips: rt305x: remove unused defines from mach-nw718.c
SVN-Revision: 28077
2011-08-22 20:41:48 +00:00
Gabor Juhos 462ca22e9c ramips: sort Makefile entries
SVN-Revision: 28076
2011-08-22 20:41:47 +00:00
Gabor Juhos d50494f3bb ramips: sort RAMIPS_MACH_* defines
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
Gabor Juhos 90686691ce ramips: fix wireless firmware extraction for wr512-3gn
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28073
2011-08-22 18:08:45 +00:00
Gabor Juhos f0049824b9 ramips: remove 'default [yn]' keywords from machine Kconfig entries
SVN-Revision: 28054
2011-08-19 15:55:12 +00:00
Gabor Juhos 6720025497 ramips: rt305x: fix wr512n image generation
SVN-Revision: 28053
2011-08-19 15:55:11 +00:00
Gabor Juhos 9085b05d9e ramips: rt305x: support for wr512-3gn-like routers
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
Gabor Juhos 46b101ad0a ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28051
2011-08-19 15:55:08 +00:00
Gabor Juhos 05209860da ramips: fix wireless on Belkin F5D8235 v2
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28050
2011-08-19 15:55:07 +00:00
Gabor Juhos f8ab604eb6 ramips: fix typo in default packages
Fix fivebytepypo - there is no such kernel module wpad-mini :)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28049
2011-08-19 15:55:05 +00:00
Hamish Guthrie 048d4aca76 omap35xx: Add 3.0.3 kernel support for Gumstix
SVN-Revision: 28047
2011-08-19 12:00:08 +00:00
Hauke Mehrtens 464539b074 kernel: update to version 3.0.3
SVN-Revision: 28043
2011-08-18 12:54:12 +00:00
Jo-Philipp Wich ebb152295b fix the default network configuration for the ASUS WL-330gE (#8751)
SVN-Revision: 28024
2011-08-17 03:16:59 +00:00
Hauke Mehrtens 09b1073f9b kernel: update kernel to version 2.6.39.4
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
Jonas Gorski 3e94ee9642 kernel: generic: refresh patches for 3.1-rc2
SVN-Revision: 28021
2011-08-16 21:42:15 +00:00
Gabor Juhos ace8ce0845 ramips: use maccalc instead of hexdump + sed
SVN-Revision: 28007
2011-08-15 19:00:23 +00:00
Gabor Juhos bfc47ffead ramips: rt305x: fix mac addresses on the Netcore NW718 board
SVN-Revision: 28006
2011-08-15 18:55:53 +00:00
Gabor Juhos 17c041cd0b ramips: add maccalc to the default package list
SVN-Revision: 28005
2011-08-15 18:55:52 +00:00
Gabor Juhos 67e480971c ramips: add input drivers to the default package list
SVN-Revision: 28003
2011-08-15 18:55:50 +00:00
Gabor Juhos 35ecf12059 ramips: rt305x: make config and factory partitions read-only on the ATP-52B
SVN-Revision: 28002
2011-08-15 18:55:48 +00:00
Gabor Juhos 75e2360ab3 ramips: add uci-defaults scripts to preconfigure USB LEDs
SVN-Revision: 28000
2011-08-15 14:12:00 +00:00
Gabor Juhos e1b176de82 ramips: rt305x: add some USB modules to the default profile
SVN-Revision: 27999
2011-08-15 14:11:58 +00:00
Gabor Juhos 169d68c98c ramips: rt305x: add dwc_otg driver
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
2011-08-15 14:11:55 +00:00
Gabor Juhos 0ca16a4600 ramips: rt305x: register the dwc_otg device on the relevant boards
SVN-Revision: 27996
2011-08-15 14:11:52 +00:00
Gabor Juhos addc86fdbd ramips: rt305x: add dwc_otg platform device
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 27995
2011-08-15 14:11:51 +00:00
Gabor Juhos 6ef87ff5e6 ramips: sync kernel config
SVN-Revision: 27993
2011-08-15 14:11:48 +00:00
Gabor Juhos 4ee4fc9725 ramips: load the input drivers during preinit
SVN-Revision: 27992
2011-08-15 14:11:47 +00:00
Gabor Juhos a3c7e71ae1 ramips: add support for Argus ATP-52B
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
Gabor Juhos 1ebcf03789 ramips: allow to specify port layout for the switch of the RT305x/RT3350
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27990
2011-08-15 14:11:43 +00:00
Gabor Juhos bb64fb2e58 generic: ar8216: add support for get link status
SVN-Revision: 27989
2011-08-15 14:11:41 +00:00
Felix Fietkau 50817f6afe kernel: disable cfi cmdset 0002 erase suspend
on some platforms, erase suspend leads to data corruption and lockups when write
ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
simply disable erase suspend, as it will usually not produce any useful gain on
the small filesystems used on embedded hardware.

SVN-Revision: 27984
2011-08-15 00:15:36 +00:00
Felix Fietkau 12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240
SVN-Revision: 27975
2011-08-13 22:30:14 +00:00
Felix Fietkau 85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues
SVN-Revision: 27973
2011-08-13 21:49:46 +00:00
Hauke Mehrtens 77218b0338 brcm47xx: fix flash detection on chipcommon less devices.
This closes #9906
Thank you for the report Kim

SVN-Revision: 27967
2011-08-12 16:37:22 +00:00
Felix Fietkau 82a05d1a19 initramfs: allow preinit to enable switching from initramfs to tmpfs to allow overlayfs to be mounted on top of it
SVN-Revision: 27960
2011-08-11 20:32:57 +00:00
Felix Fietkau d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922)
SVN-Revision: 27959
2011-08-11 13:52:40 +00:00
Florian Fainelli ce2ced7311 package more board specific modules:
- keyboard matrix driver
- SoC sound support

based on patch by KanjiMonster

SVN-Revision: 27957
2011-08-11 11:18:44 +00:00
Florian Fainelli f7dbf2ef04 add more missing touchscren symbols (3.0+)
SVN-Revision: 27956
2011-08-11 11:18:41 +00:00
Florian Fainelli 11b1f687d4 disable hardware perf support to work in qemu
SVN-Revision: 27955
2011-08-11 11:18:37 +00:00
Hauke Mehrtens 20de21593b kernel: revert r27953
KanjiMonster did the right patch, I was just confused because of linux-3.0 and linux-2.6.30

SVN-Revision: 27954
2011-08-11 09:54:02 +00:00
Hauke Mehrtens 409f8211e1 kernel: fix ocf patch for kernel 2.6.30
find_task_by_vpid is already exported by the kernel without any patches needed.

SVN-Revision: 27953
2011-08-11 09:47:36 +00:00
Jonas Gorski 7304dcad2a kernel: 2.6.30: remove bogus additional find_task_by_vpid export from OCF
find_task_by_vpid is already exported, thus breaking builds.

SVN-Revision: 27952
2011-08-11 09:46:30 +00:00
Jonas Gorski def60e2918 ar71xx: make ehci patch apply again
SVN-Revision: 27951
2011-08-10 23:02:56 +00:00
Felix Fietkau 9e5ead9a51 ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918)
SVN-Revision: 27950
2011-08-10 22:24:56 +00:00
Florian Fainelli b59ab7d13b fix ehci build on 3.0+
SVN-Revision: 27946
2011-08-10 11:37:25 +00:00
Florian Fainelli 0e40c19b45 add ignore_oc in struct ehci_hcd
SVN-Revision: 27945
2011-08-10 11:37:21 +00:00
Florian Fainelli 458716389c update to 3.0.1
SVN-Revision: 27943
2011-08-09 13:13:22 +00:00
Florian Fainelli f124358722 add CONFIG_EARLY_PRINTK
SVN-Revision: 27942
2011-08-09 13:13:16 +00:00
Jonas Gorski 6b5f483efa bcm63xx: add support for linux 3.1-rc1
SVN-Revision: 27941
2011-08-09 12:19:49 +00:00
Jonas Gorski cf2070bd5b linux: generic: add support for 3.1-rc1
SVN-Revision: 27940
2011-08-09 12:19:43 +00:00
Daniel Dickinson 7ef004a144 Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"

SVN-Revision: 27929
2011-08-08 02:33:18 +00:00
Felix Fietkau ba9e7889dd kernel: fix another typo in the netfilter optimization patches
SVN-Revision: 27927
2011-08-07 21:17:18 +00:00
Hauke Mehrtens 6f4151b7f0 kernel: add missing option
SVN-Revision: 27925
2011-08-06 16:46:04 +00:00
Felix Fietkau ac96ae6731 kernel: add missing checks in the netfilter optimization patch which broke some rules containing only source/destination address checks
SVN-Revision: 27923
2011-08-06 12:39:31 +00:00
Hauke Mehrtens a1d5ad7655 uml: add some missing options
SVN-Revision: 27921
2011-08-06 11:23:45 +00:00
Hauke Mehrtens d447cb5164 kernel: add some missing config options
These options where found by buildbot

SVN-Revision: 27920
2011-08-06 10:41:15 +00:00
Hauke Mehrtens 51be984655 kernel: update to kernel version 3.0.1
SVN-Revision: 27918
2011-08-06 09:51:55 +00:00
Florian Fainelli 55e020cd14 update to kernel 3.0
SVN-Revision: 27912
2011-08-05 13:48:42 +00:00
Florian Fainelli 698c1b4952 add more missing config symbols
SVN-Revision: 27911
2011-08-05 13:48:38 +00:00
Florian Fainelli 48af2495b4 update to kernel 3.0
SVN-Revision: 27910
2011-08-05 13:48:35 +00:00
Florian Fainelli a8e79cbdf8 add 101-perf_arm_uclibc.patch to 3.0 patches
SVN-Revision: 27909
2011-08-05 13:48:31 +00:00
Florian Fainelli c99d08f050 add missing config symbol
SVN-Revision: 27908
2011-08-05 13:48:28 +00:00
Gabor Juhos 7e5a1bc1d0 ar71xx: fix image generation
SVN-Revision: 27907
2011-08-05 10:31:52 +00:00
Hauke Mehrtens 77966b81d8 brcm47xx: use kernel 3.0
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.

SVN-Revision: 27906
2011-08-04 20:10:24 +00:00
Hauke Mehrtens 8428ebd8e8 brcm47xx: update patches
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates

SVN-Revision: 27902
2011-08-04 20:04:54 +00:00
Gabor Juhos 85b858fae6 ar71xx: enable sysupgrade on the AP96 and DB120 boards
SVN-Revision: 27901
2011-08-04 19:41:18 +00:00
Gabor Juhos fb77134596 ar71xx: use the same test for AP121 and Zcomax sysupgrade images
SVN-Revision: 27900
2011-08-04 19:41:17 +00:00
Gabor Juhos fd3a5f64f2 ar71xx: cleanup image generation Makefile
SVN-Revision: 27899
2011-08-04 19:41:16 +00:00
Felix Fietkau 4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
2011-08-04 17:36:31 +00:00
Felix Fietkau d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
2011-08-04 17:36:27 +00:00
Felix Fietkau 500c3a1475 ar71xx: fix MAC/MDIO reset mask handling
SVN-Revision: 27894
2011-08-04 17:36:23 +00:00
Jonas Gorski 3b36e83a29 generic: Add missing config symbol
SVN-Revision: 27887
2011-08-03 23:28:00 +00:00
Florian Fainelli 4543f6d659 remove 8*1-usb_serial_endpoint_size.patch
This is breaking some devices out there such as Winchiphead CH341 adapters (#9601)

SVN-Revision: 27885
2011-08-03 13:23:21 +00:00
Florian Fainelli c37a9544bf add support for BCM6345 Ethernet DMA engine
SVN-Revision: 27881
2011-08-02 18:55:55 +00:00
Florian Fainelli 11c4128770 improve BCM6345 support
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control

SVN-Revision: 27880
2011-08-02 18:55:46 +00:00
Florian Fainelli c4af036ec7 refresh 3.0 patches
SVN-Revision: 27879
2011-08-02 18:55:38 +00:00
Felix Fietkau 54d97e6782 ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55%
SVN-Revision: 27878
2011-08-02 15:12:08 +00:00
Florian Fainelli a0ce3668a6 fix r6040 multicast patch, thanks nicolas le falher
SVN-Revision: 27876
2011-08-02 14:13:00 +00:00
Jonas Gorski ed2b7cd342 linux/generic: remove obsolete kernel options from 3.0
Also fix one typo.

SVN-Revision: 27875
2011-08-02 09:58:16 +00:00
Jonas Gorski 61e2e03311 kernel: Fix firewire for 2.6.37+
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.

SVN-Revision: 27874
2011-08-02 09:53:19 +00:00
Felix Fietkau e5e17a1ce8 imagebuilder: clean opkg files if requested (patch from #9866)
SVN-Revision: 27872
2011-08-01 23:58:11 +00:00
Felix Fietkau 62b8cba9c0 kernel: enable inotify by default (#8055)
SVN-Revision: 27853
2011-07-31 18:12:23 +00:00
Felix Fietkau 19eaf1c5f7 kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
SVN-Revision: 27840
2011-07-30 15:39:52 +00:00
Imre Kaloz e4b6839fd3 upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...)
SVN-Revision: 27826
2011-07-29 10:16:48 +00:00
Jonas Gorski e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
Gabor Juhos ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
Gabor Juhos 437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
Gabor Juhos 7193f29d96 ramips: rt305x: enable M25P80 driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
2011-07-28 10:56:28 +00:00
Gabor Juhos c6db514de8 ramips: rt305x: introduce rt305x_register_spi helper
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
Gabor Juhos 57122e7ccc ramips: add SPI controller driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
Gabor Juhos 3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
Gabor Juhos 857c1028ac ramips: rt305x: change machine id for DIR-300
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
Gabor Juhos 42d3a55347 ramips: rt305x: rename LEDs on the DIR-300-B1
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
Gabor Juhos 39689b648f ramips: rt305x: sort Kconfig/Makefile entries
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
Gabor Juhos 32c0534516 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

SVN-Revision: 27804
2011-07-28 10:56:18 +00:00
Gabor Juhos 57663ce25b ramips: fix PWH2004 image generation
SVN-Revision: 27803
2011-07-28 10:56:15 +00:00
Jonas Gorski eaa935658b swconfig: Add generic switch identifiers
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.

SVN-Revision: 27800
2011-07-27 18:00:18 +00:00
Felix Fietkau 4da138d899 x86/alix2: include WAN interface by default
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27787
2011-07-26 16:37:48 +00:00
Felix Fietkau 41db64f8e0 x86/alix2: fix typo in target makefile
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27786
2011-07-26 16:37:44 +00:00
Hauke Mehrtens 80956276a7 x86: add missing config symbols
This adds some config symbols for kernel 3.0.

Thank you realopty for the patch.

This is from #9719.

SVN-Revision: 27775
2011-07-25 21:21:01 +00:00
Jonas Gorski 4e6c93bef1 bcm63xx: Fix SPI commands and register offsets for BCM6348
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.

Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>

SVN-Revision: 27774
2011-07-25 19:52:47 +00:00
Imre Kaloz f0f10fa599 add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch
SVN-Revision: 27762
2011-07-24 22:04:08 +00:00
Jo-Philipp Wich f66871e836 From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua>
SVN-Revision: 27760
2011-07-24 15:37:00 +00:00
Jo-Philipp Wich 6eb9e39bc4 refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final
SVN-Revision: 27759
2011-07-24 15:36:33 +00:00
Hauke Mehrtens 4815eaa4c3 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.

SVN-Revision: 27758
2011-07-24 15:18:29 +00:00
Felix Fietkau 9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh
SVN-Revision: 27756
2011-07-24 14:40:35 +00:00
Felix Fietkau 5b32d62fcf rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB
SVN-Revision: 27755
2011-07-24 14:40:31 +00:00
Felix Fietkau 1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
Hauke Mehrtens 00dd85d8f6 ocf-linux: version bump to 20110720
Fixes problem with TFM allocation in cryptosoft.c

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

Hauke:
 * remove ubsec_ssb package and take it from ocf-linux
 * use patches from ocf-linux package
 * refresh all patches
 * readd some build fixes for OpenWrt.
 * readd CRYPTO_MANAGER dependency

SVN-Revision: 27753
2011-07-24 14:17:58 +00:00
Felix Fietkau b5e3f6cd81 x86: 2.6.39 requires additional symbol
Sysfs support for DMI BIOS was added in 2.6.39.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27749
2011-07-24 09:41:07 +00:00
Felix Fietkau a6f7e72cf7 atheros: fix mii phy read/write ioctl
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 27747
2011-07-24 09:11:10 +00:00
Felix Fietkau 6d3bddb056 geos: include pppstats and pppdump in default packaging
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27743
2011-07-24 08:41:58 +00:00
Felix Fietkau 9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684)
SVN-Revision: 27739
2011-07-24 08:02:20 +00:00
Imre Kaloz 193845ce7a upgrade to 3.0
SVN-Revision: 27738
2011-07-23 20:44:08 +00:00
Imre Kaloz 5e29e14795 upgrade to 3.0
SVN-Revision: 27737
2011-07-23 20:43:53 +00:00
Imre Kaloz 0cb1b5d775 3.0 is out
SVN-Revision: 27736
2011-07-23 20:42:58 +00:00
Hauke Mehrtens 49f4d4217e brcm47xx: build bcma into the kernel
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
2011-07-23 11:19:58 +00:00
Hauke Mehrtens 5169b72c8a kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing
SVN-Revision: 27731
2011-07-23 11:17:00 +00:00
Hauke Mehrtens b07b5fc7b6 brcm47xx: remove old kernel versions
SVN-Revision: 27724
2011-07-22 18:41:24 +00:00
Hauke Mehrtens b988168906 brcm47xx: update bcma and ssb to master-2011-07-21
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
2011-07-22 16:30:42 +00:00
Hauke Mehrtens 39f491e479 kernel: update to linux-3.0 and refresh patches.
Thank you Peter Wagner for the patch

SVN-Revision: 27722
2011-07-22 16:04:25 +00:00
Felix Fietkau c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240
SVN-Revision: 27705
2011-07-20 14:39:47 +00:00
Felix Fietkau ca473833c4 ar71xx: configure address aging on ar7240
SVN-Revision: 27704
2011-07-20 14:39:42 +00:00
Felix Fietkau fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x
SVN-Revision: 27703
2011-07-20 12:04:34 +00:00
Felix Fietkau 005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset
SVN-Revision: 27702
2011-07-20 12:04:29 +00:00
Felix Fietkau e7ab000008 ar71xx: increase the delay after the ethernet MAC reset
SVN-Revision: 27701
2011-07-20 12:04:25 +00:00
Felix Fietkau 255dcaa3a6 ar71xx: fix an unused variable warning
SVN-Revision: 27700
2011-07-20 12:04:20 +00:00
John Crispin 8acc276692 sync default kernel config for lantiq danube/ar9
SVN-Revision: 27697
2011-07-19 18:08:09 +00:00
John Crispin 500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE
SVN-Revision: 27696
2011-07-19 18:06:52 +00:00
John Crispin 78a9b1a2ad fixes pci on lantiq AR9 SoC
SVN-Revision: 27695
2011-07-19 18:06:42 +00:00
John Crispin 3833b7be24 add support for more lantiq AR9 boards
SVN-Revision: 27694
2011-07-19 18:06:33 +00:00
Felix Fietkau fee32761f3 kernel: backport and enable tmpfs xattr support for 2.6.39
SVN-Revision: 27691
2011-07-19 09:00:55 +00:00
John Crispin 6b8c119b41 * fix external interrupts
SVN-Revision: 27687
2011-07-18 16:27:11 +00:00
John Crispin 5906377332 * add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
2011-07-17 19:27:44 +00:00
Florian Fainelli 3994a2d1f9 add additionnal debug symbols when kernel debugging is enabled
SVN-Revision: 27637
2011-07-17 12:30:04 +00:00
Florian Fainelli 9c7294f7c7 add ehci support to DWV-S0 board (#9059)
SVN-Revision: 27622
2011-07-16 08:39:04 +00:00
Florian Fainelli 930485561c fix GEN_SPI_RSET_BASE macro (#9697)
SVN-Revision: 27604
2011-07-13 09:33:11 +00:00
Imre Kaloz ab5fd3c1cb upgrade to 3.0-rc7
SVN-Revision: 27600
2011-07-12 13:44:16 +00:00
Imre Kaloz 0321740a62 upgrade to 3.0-rc6 and optimize for armv5te again
SVN-Revision: 27592
2011-07-11 20:35:16 +00:00
Felix Fietkau f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
SVN-Revision: 27568
2011-07-09 06:30:13 +00:00
Felix Fietkau 2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
SVN-Revision: 27567
2011-07-09 06:29:46 +00:00
Imre Kaloz 8788b97e65 use the new upstream l2cache and wdt code, smaller changes, refresh patches
SVN-Revision: 27558
2011-07-08 09:41:07 +00:00
Imre Kaloz b3b0f0e49a add mpcore_wdt fixes
SVN-Revision: 27557
2011-07-08 09:33:13 +00:00
John Crispin 7f548d379f fix generation of falcon images for profiles
SVN-Revision: 27550
2011-07-07 20:20:51 +00:00
John Crispin d7732885ed adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
2011-07-07 20:20:46 +00:00
John Crispin b75a8fb532 fix up falcon kernel config
SVN-Revision: 27542
2011-07-07 18:20:56 +00:00
John Crispin 036df9f088 fix i2c-falcon kmod package selection
SVN-Revision: 27541
2011-07-07 18:20:51 +00:00
John Crispin a463daa818 replace all references to xway with danube
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
John Crispin dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube
SVN-Revision: 27537
2011-07-07 18:20:31 +00:00
John Crispin 3c1079a7a7 add ar9 specific profile
SVN-Revision: 27536
2011-07-07 18:20:27 +00:00
John Crispin 09d547eae4 rename xway profile to danube and remove ar9 specifics
SVN-Revision: 27535
2011-07-07 18:20:21 +00:00
John Crispin f177052c9d remove ar9 board from xway profiles
SVN-Revision: 27534
2011-07-07 18:20:16 +00:00
John Crispin dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
SVN-Revision: 27532
2011-07-07 18:20:07 +00:00
Imre Kaloz 79fa6c693a refresh patches
SVN-Revision: 27528
2011-07-07 17:18:50 +00:00
Imre Kaloz b8227050fb refresh patches
SVN-Revision: 27527
2011-07-07 17:18:06 +00:00
Imre Kaloz 92981b6bb3 enable smp support
SVN-Revision: 27526
2011-07-07 17:17:44 +00:00
Imre Kaloz 94055a90a7 make smp code more similar to upstream
SVN-Revision: 27525
2011-07-07 17:17:06 +00:00
Imre Kaloz 42df203852 3.0 is at rc6 now
SVN-Revision: 27524
2011-07-07 13:30:41 +00:00
Gabor Juhos 5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash
SVN-Revision: 27523
2011-07-07 13:01:50 +00:00
Gabor Juhos cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards
SVN-Revision: 27522
2011-07-07 13:01:48 +00:00
Imre Kaloz b15f8f765a add support for and switch to XZ compressed kernels on ARM
SVN-Revision: 27518
2011-07-07 10:26:16 +00:00
Imre Kaloz d148dcce05 select the right cpu
SVN-Revision: 27517
2011-07-07 10:24:37 +00:00
Florian Fainelli a3e343b722 fix building of perf for arm on uclibc
SVN-Revision: 27514
2011-07-07 09:43:00 +00:00
Florian Fainelli a4d69536ea enable support for perf events
SVN-Revision: 27512
2011-07-07 09:42:53 +00:00
Florian Fainelli 0cb42cf9a4 enable perf counter support
SVN-Revision: 27511
2011-07-07 09:42:50 +00:00
Daniel Dickinson 0d8b0e937d base-files: diag.sh: added failsafe led definition
SVN-Revision: 27502
2011-07-07 03:09:20 +00:00
John Crispin a674aabe54 get ready for 3.0
SVN-Revision: 27496
2011-07-06 17:27:17 +00:00
Gabor Juhos abb1ca01a7 ramips: fix buffalo image generation
SVN-Revision: 27495
2011-07-06 16:46:33 +00:00
Imre Kaloz a832965eff add 3.0 support
SVN-Revision: 27493
2011-07-06 13:03:38 +00:00
Imre Kaloz a00596924b refresh patches
SVN-Revision: 27492
2011-07-06 12:57:51 +00:00
Imre Kaloz 90bd74dd8b fixup mtd refresh and co.
SVN-Revision: 27491
2011-07-06 12:55:21 +00:00
Imre Kaloz f24764a372 fix myloader patch, thanks KanjiMonster
SVN-Revision: 27490
2011-07-06 12:48:17 +00:00
John Crispin d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
SVN-Revision: 27489
2011-07-06 10:36:56 +00:00
Imre Kaloz c93b5653bc we have an up-to-date mach-type file now
SVN-Revision: 27486
2011-07-06 10:12:50 +00:00
Imre Kaloz 05790d9cba replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff
SVN-Revision: 27485
2011-07-06 10:09:15 +00:00
Florian Fainelli 00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block
SVN-Revision: 27484
2011-07-06 10:00:39 +00:00
Florian Fainelli 965567a320 refresh 2.6.39 geode patches
SVN-Revision: 27483
2011-07-06 10:00:05 +00:00
Gabor Juhos 1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.

SVN-Revision: 27478
2011-07-06 08:05:00 +00:00
Gabor Juhos d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board
SVN-Revision: 27477
2011-07-06 08:04:55 +00:00
Gabor Juhos 2cc346b8e0 ramips: create tftp image for the WHR-G300N board
SVN-Revision: 27476
2011-07-06 08:04:54 +00:00
Gabor Juhos 0dc18d8586 ramips: create factory image for the WHR-G300N board
SVN-Revision: 27474
2011-07-06 08:04:52 +00:00
Daniel Dickinson 1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
SVN-Revision: 27471
2011-07-06 06:35:24 +00:00
Daniel Dickinson 9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
SVN-Revision: 27470
2011-07-06 06:35:22 +00:00
Imre Kaloz 612a1fcbc4 add some symbols
SVN-Revision: 27464
2011-07-05 21:19:57 +00:00
Florian Fainelli d24fc7ef56 sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423)
SVN-Revision: 27457
2011-07-05 12:40:50 +00:00
Imre Kaloz c52560302d add missing symbols
SVN-Revision: 27454
2011-07-05 11:55:31 +00:00
Florian Fainelli 7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533)
SVN-Revision: 27448
2011-07-04 15:04:58 +00:00
Gabor Juhos 89f6b29feb ar71xx: fix building of squashfs images
SVN-Revision: 27446
2011-07-04 12:10:03 +00:00
John Crispin 29653782a9 set DEFAULT_SUBTARGET for lantiq/
SVN-Revision: 27445
2011-07-04 11:21:47 +00:00
John Crispin 04fefa4a28 fix broken falcon patches from last night
SVN-Revision: 27441
2011-07-04 07:50:34 +00:00
Gabor Juhos e9c8218375 ramips: create factory image for DIR-300-B1
SVN-Revision: 27439
2011-07-04 06:48:45 +00:00
Felix Fietkau 7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650)
SVN-Revision: 27434
2011-07-04 03:03:34 +00:00
John Crispin cd8166f3fd AT91: flexibity: add system uci file
SVN-Revision: 27413
2011-07-03 18:55:57 +00:00
John Crispin 349e97f879 AT91: Add flexibity board support
The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

SVN-Revision: 27412
2011-07-03 18:51:59 +00:00
John Crispin 2975f0aaf1 alix2: add/subtract features as needed
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
2011-07-03 17:39:24 +00:00
John Crispin 0a8430bfab use netif_receive_skb on lantiq
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
2011-07-03 17:39:05 +00:00
John Crispin 058eca0b3b automatic subtarget enumaration
SVN-Revision: 27407
2011-07-03 17:38:23 +00:00
John Crispin 43771202d3 update lantiq/falcon patches
SVN-Revision: 27406
2011-07-03 17:38:11 +00:00
John Crispin d43cbe24a5 fix description for lantiq target
SVN-Revision: 27405
2011-07-03 17:37:57 +00:00
Gabor Juhos 6e7b802297 ramips: merge 2.6.39 patches
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
Gabor Juhos 646f64d389 ramips: remove 2.6.37 stuff
SVN-Revision: 27398
2011-07-03 15:02:09 +00:00
Gabor Juhos 2fc6be00f4 ramips: switch to 2.6.39.2
SVN-Revision: 27397
2011-07-03 15:02:07 +00:00
Gabor Juhos 0fde070cf9 ramips: add 2.6.39 support
Based on the patches from #9625

SVN-Revision: 27396
2011-07-03 15:02:06 +00:00
Gabor Juhos c8010517d5 ramips: add hotplug script to extract eeprom for the rt2x00 driver
SVN-Revision: 27393
2011-07-03 15:02:01 +00:00
Gabor Juhos 3334d0604e ramips: specify eeprom file name on RT305X
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
Gabor Juhos f53cc4c439 ramips: specify eeprom file name on RT288X
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
Gabor Juhos 129217e127 generic: add rt2x00_platform.h
SVN-Revision: 27390
2011-07-03 15:01:57 +00:00
Gabor Juhos 521e495f4b ramips: add all supported boards to lib/ramips.sh
SVN-Revision: 27389
2011-07-03 15:01:56 +00:00
Gabor Juhos 6f54df889a ramips: check the size of the uImage in image generation
SVN-Revision: 27388
2011-07-03 15:01:55 +00:00
Gabor Juhos 575a5286c8 ramips: use lowercase partiion names on the WCR150GN board
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
Gabor Juhos 31facf0b75 ramips: use different partition names in the DIR-300-B1 image
SVN-Revision: 27386
2011-07-03 15:01:52 +00:00
Gabor Juhos dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252)
SVN-Revision: 27385
2011-07-03 15:01:51 +00:00
Gabor Juhos f1cf43d468 ramips: update partition map for DIR-300-B1
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
Gabor Juhos 641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
Gabor Juhos 381d7f05af ramips: fix a section mismatch warning
SVN-Revision: 27382
2011-07-03 15:01:46 +00:00
Gabor Juhos 16ad91d69f ramips: remove unused include from the common GPIO code
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
Gabor Juhos c9f3e7082f ramips: disable watchdog on sysupgrade
SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
Gabor Juhos e70e6f6848 ramips: swap target check in image generation
SVN-Revision: 27379
2011-07-03 15:01:42 +00:00
Gabor Juhos affb57ee27 ramips: update HW550-3G mtd partitions
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
Gabor Juhos 3099ffe414 ramips: set cp0_perfcount_irq for RT305X
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
Daniel Dickinson f9f3ddebe8 target/patches: This has been sent upstream, but might not appear for a couple of weeks.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27373
2011-07-03 03:20:04 +00:00
Daniel Dickinson b0cc0067f9 target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27371
2011-07-03 03:14:53 +00:00
Daniel Dickinson f2d749ee15 Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

SVN-Revision: 27370
2011-07-03 03:14:51 +00:00
Daniel Dickinson 209a776f22 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27369
2011-07-03 03:14:48 +00:00
Daniel Dickinson 88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers.
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
2011-07-03 02:59:00 +00:00
Gabor Juhos b3a89652a5 ar71xx: use 4k image only for the AP121 board
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

SVN-Revision: 27357
2011-07-02 08:37:59 +00:00
Imre Kaloz ea8440f4c3 cns21xx belongs to the Econa family, too
SVN-Revision: 27354
2011-07-02 08:31:25 +00:00
Imre Kaloz 535cae8393 mark it broken
SVN-Revision: 27349
2011-07-02 07:26:04 +00:00
Jo-Philipp Wich 701543d3ef revert r27043 (#9513)
SVN-Revision: 27343
2011-07-01 19:52:57 +00:00
Jo-Philipp Wich 1edef5ec98 revert r27341, it introduce wrong behaviour for other models
SVN-Revision: 27342
2011-07-01 19:15:45 +00:00
Jo-Philipp Wich 3b3103b2f1 turn status LED off if device finished initializing
SVN-Revision: 27341
2011-07-01 18:39:53 +00:00
Imre Kaloz 0ba94475c9 upgrade avr32 u-boot to 2011.06
SVN-Revision: 27330
2011-07-01 11:32:01 +00:00
Imre Kaloz 84c89fb02d upgrade to 2.6.39.2
SVN-Revision: 27329
2011-07-01 11:31:08 +00:00
Imre Kaloz b655c7c85a preliminary 3.0 support
SVN-Revision: 27328
2011-07-01 08:15:48 +00:00
Imre Kaloz 8222c7bb24 add missing kernel symbols
SVN-Revision: 27327
2011-07-01 08:11:16 +00:00
Felix Fietkau a41f80bca1 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198)
SVN-Revision: 27322
2011-07-01 03:20:13 +00:00
Gabor Juhos f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
The config option has been removed in 2.6.39.

SVN-Revision: 27320
2011-06-30 12:15:33 +00:00
Hauke Mehrtens 8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot
SVN-Revision: 27316
2011-06-29 17:42:34 +00:00
Gabor Juhos d98476c6bd ar71xx: merge 2.6.39 patches
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
2011-06-29 08:57:37 +00:00
Gabor Juhos 74a88749f3 ar71xx: remove 2.6.37 support as well
SVN-Revision: 27313
2011-06-29 08:57:36 +00:00
Gabor Juhos 1d5378f588 ar71xx: remove 2.6.38 support
SVN-Revision: 27312
2011-06-29 08:57:34 +00:00
Gabor Juhos 36e7a8b33e ar71xx: switch to 2.6.39
SVN-Revision: 27311
2011-06-29 08:57:33 +00:00
Gabor Juhos 6627574e57 ar71xx: add 2.6.39 support
SVN-Revision: 27310
2011-06-29 08:57:32 +00:00
Gabor Juhos 1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type
SVN-Revision: 27309
2011-06-29 08:57:30 +00:00
Gabor Juhos 055e317ed8 ar71xx: add separate handlers for IP3 interrupts
SVN-Revision: 27308
2011-06-29 08:57:29 +00:00
Gabor Juhos 59bff8bf18 ar71xx: use separate handlers for IP2 interrupts
SVN-Revision: 27307
2011-06-29 08:57:28 +00:00
Gabor Juhos 9d6af600e1 ar71xx: remove useless irq_desc.status initializations
SVN-Revision: 27306
2011-06-29 08:57:27 +00:00
Gabor Juhos 01ac07c9b3 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0
SVN-Revision: 27305
2011-06-29 08:57:25 +00:00
Hauke Mehrtens 8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400.
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
2011-06-28 22:23:21 +00:00
Hauke Mehrtens 4c18da3df6 brcm47xx: add initial support for devices with bcma bus.
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
Hauke Mehrtens 3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5
SVN-Revision: 27300
2011-06-28 20:25:39 +00:00
Hauke Mehrtens 2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628
SVN-Revision: 27299
2011-06-28 19:33:50 +00:00
Hauke Mehrtens c5821c1a3a kernel: update kernel to 2.6.39.2
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
Imre Kaloz e80ebb769f ethernet cleanup and sata fix - thanks, Chris
SVN-Revision: 27297
2011-06-28 06:54:20 +00:00
Hauke Mehrtens 4c392185a6 brcm47xx: update kernel to version 2.6.39
SVN-Revision: 27296
2011-06-27 21:29:20 +00:00
Hauke Mehrtens ca979845cc kernel: update ssb and bcma to linux-next next-20110627
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
Hauke Mehrtens e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection.
SVN-Revision: 27294
2011-06-27 20:20:11 +00:00
Hauke Mehrtens c1873c46b8 kernel: update ssb and bcma to linux-next next-20110627
SVN-Revision: 27293
2011-06-27 20:18:49 +00:00
Jo-Philipp Wich 2c6bd71767 remove remaining uci-defaults
SVN-Revision: 27291
2011-06-27 01:42:31 +00:00
Florian Fainelli 9f63b7326f geos: deprecate uci-defaults files
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27287
2011-06-25 22:05:10 +00:00
Florian Fainelli 1f6047496e alix2: add config files for bridging
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27286
2011-06-25 22:05:05 +00:00
Florian Fainelli 3f40c0f7df remove gpiodev, prefer sysfs gpio
SVN-Revision: 27284
2011-06-25 19:26:17 +00:00
Felix Fietkau cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607)
SVN-Revision: 27283
2011-06-25 13:54:42 +00:00
Felix Fietkau ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608)
SVN-Revision: 27282
2011-06-25 13:48:47 +00:00
Florian Fainelli 85d29f3cd0 add missing linux-3.0 config symbol
SVN-Revision: 27269
2011-06-24 11:43:30 +00:00
Florian Fainelli f6e4eb15bc register SSB sprom after ethernet devices
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

SVN-Revision: 27258
2011-06-22 12:32:03 +00:00
Florian Fainelli 5a76c6bdd7 fix tab damage in 141-led_count.patch
SVN-Revision: 27254
2011-06-21 20:52:58 +00:00
Florian Fainelli 3f0f8d9c87 fix and make usable kmod-pcmcia-rsrc
This module is also needed for e.g: kmod-bcm63xx-pcmcia

SVN-Revision: 27253
2011-06-21 20:52:53 +00:00
Hauke Mehrtens 1c0d5f5ae2 kernel: refresh patches for kernel 3.0-rc4
SVN-Revision: 27247
2011-06-21 18:39:47 +00:00
Florian Fainelli 9bdf6abb9d use macros to generate SPI registers table and switches
SVN-Revision: 27246
2011-06-21 10:05:51 +00:00
Florian Fainelli 6cb3195b40 fix usb mis-cleanup after r27162 (#9581)
SVN-Revision: 27243
2011-06-20 10:04:53 +00:00
Jo-Philipp Wich 70fb318a90 Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27241
2011-06-19 23:05:21 +00:00
Jo-Philipp Wich 9cd64fa754 generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish).
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27237
2011-06-19 22:48:53 +00:00
Florian Fainelli ab74628c10 dev-spi.c checks for running CPU, not board code
SVN-Revision: 27236
2011-06-19 20:46:00 +00:00
Florian Fainelli 4dd4cbeb43 fixup patches after r27234
SVN-Revision: 27235
2011-06-19 20:28:38 +00:00
Florian Fainelli 7819b530da remove accidental bcm6345 related patches
SVN-Revision: 27234
2011-06-19 20:16:59 +00:00
Florian Fainelli 12db3df666 remove support for 2.6.37 and 2.6.38
SVN-Revision: 27233
2011-06-19 20:14:22 +00:00
Florian Fainelli 6bb0a608dc switch to 2.6.39
SVN-Revision: 27232
2011-06-19 20:12:45 +00:00
Florian Fainelli bcada2640b remove 2.6.35 and 2.6.32 support
SVN-Revision: 27230
2011-06-19 20:09:40 +00:00
Florian Fainelli 67d0ca0b4b remove pre 2.6.39 patches and config
SVN-Revision: 27229
2011-06-19 20:09:00 +00:00
Florian Fainelli 34db3f9f86 remove 2.6.37 patches and config
SVN-Revision: 27228
2011-06-19 20:07:26 +00:00
Gabor Juhos e6af77a1c8 ar71xx: cleanup AR933X UART driver
SVN-Revision: 27222
2011-06-19 13:17:51 +00:00
Gabor Juhos 066e04d497 ar71xx: fix uart clock frequency for AR933X
SVN-Revision: 27221
2011-06-19 13:17:50 +00:00
Hauke Mehrtens 47e218c426 brcm47xx: refresh patches
SVN-Revision: 27219
2011-06-18 15:53:14 +00:00
Hauke Mehrtens 79a7343560 kernel: update to kernel 2.6.38.8
SVN-Revision: 27218
2011-06-18 15:52:15 +00:00
Hauke Mehrtens 75f9e0c615 brcm47xx: add support for kernel 3.0
SVN-Revision: 27217
2011-06-18 15:24:44 +00:00
Rod Whitby 710409740e ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box.
SVN-Revision: 27202
2011-06-17 11:22:22 +00:00
Florian Fainelli b97459eb88 add missing USBIP_CORE item in config-3.0
SVN-Revision: 27195
2011-06-16 14:34:50 +00:00
Florian Fainelli 540b838998 allow any console to be used
SVN-Revision: 27193
2011-06-16 14:34:44 +00:00
Florian Fainelli 426dccd019 bcm63xx: Add support for Linux 3.0-rc3
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27192
2011-06-16 14:34:40 +00:00
Hauke Mehrtens 235e331987 linux/generic: Add support for 3.0-rc3
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27191
2011-06-15 21:31:01 +00:00
Hauke Mehrtens bf64ac730a bcm47xx: Remove kernel checks from image Makefile
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
2011-06-15 21:11:49 +00:00
Jo-Philipp Wich 5752efdadd 2.6.39.1: missing kernel symbols If you turn on I2C, you'll need this symbol defined.
Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27182
2011-06-15 18:18:32 +00:00
Felix Fietkau dcddcfca24 add missing kernel config symbols for usb on powerpc
SVN-Revision: 27181
2011-06-15 18:07:26 +00:00
Jo-Philipp Wich d39379296c backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code)
SVN-Revision: 27179
2011-06-15 14:11:33 +00:00
Jo-Philipp Wich 14913ab8b0 revert r26997, it does not apply against 2.6.36.4
SVN-Revision: 27178
2011-06-15 13:51:57 +00:00
Florian Fainelli 685a61eb6c switch to 2.6.39
SVN-Revision: 27175
2011-06-14 20:05:13 +00:00
Florian Fainelli 0fb8884efe fix diag.sh with qube2 front led
SVN-Revision: 27174
2011-06-14 20:05:09 +00:00
Florian Fainelli dee0010ae2 resync kernel config
SVN-Revision: 27173
2011-06-14 20:05:03 +00:00
John Crispin 0732b2db78 Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>

SVN-Revision: 27172
2011-06-13 22:37:23 +00:00
Florian Fainelli 7a96525a6f replace unfortify patch with a better one
Thanks to Richard Weinberger for providing this patch

SVN-Revision: 27168
2011-06-13 12:45:12 +00:00
Gabor Juhos b7e016ba42 ar71xx: use ar933x_uart.h in the AR933X serial driver
SVN-Revision: 27166
2011-06-13 08:12:40 +00:00
Gabor Juhos b58ede16a5 ar71xx: update early_printk code
SVN-Revision: 27165
2011-06-13 08:12:38 +00:00
Florian Fainelli 6a5112a750 cleanup files using checkpatch.pl
SVN-Revision: 27162
2011-06-12 19:17:57 +00:00
John Crispin fa59bb0958 * move patches around * add basic support for gigaset sx76x
SVN-Revision: 27158
2011-06-12 08:56:26 +00:00
Vasilis Tsiligiannis 70106f153d Remove trailing spaces, convert spaces to tabs
SVN-Revision: 27153
2011-06-09 19:30:50 +00:00
John Crispin e3e2a170cd we dont need 1024 bytes buffer. 128 bytes is enough.
SVN-Revision: 27143
2011-06-09 07:08:54 +00:00
John Crispin 8329ecf92c * revert accidental config change
SVN-Revision: 27142
2011-06-09 05:10:18 +00:00
John Crispin ed0e649a5b * fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)

SVN-Revision: 27137
2011-06-08 17:57:55 +00:00
Felix Fietkau 9160e06af5 ar71xx: override inittab to enable login on ttyATH0
SVN-Revision: 27128
2011-06-07 17:07:10 +00:00
Florian Fainelli e7b6721f4e update to 2.6.39.1
SVN-Revision: 27114
2011-06-04 18:27:14 +00:00
Florian Fainelli d97f50b69b define UIMAGE for various rootfs targets
SVN-Revision: 27113
2011-06-04 18:27:09 +00:00
Florian Fainelli 429745edd6 use IMG_PREFIX for image name
SVN-Revision: 27112
2011-06-04 18:27:04 +00:00
Florian Fainelli 4aaf590909 add more config symbols to 2.6.39
SVN-Revision: 27111
2011-06-04 18:27:00 +00:00
Florian Fainelli 89dd8aed1f update to 2.6.39.1
SVN-Revision: 27110
2011-06-04 18:26:54 +00:00
Florian Fainelli 72996d2dcb update to 2.6.39.1
SVN-Revision: 27107
2011-06-04 13:36:09 +00:00
Florian Fainelli 20c0427132 update to 2.6.39.1
SVN-Revision: 27106
2011-06-04 13:36:05 +00:00
Florian Fainelli de2e05b6f2 add some missing 2.6.39 config symbols
SVN-Revision: 27105
2011-06-04 13:36:00 +00:00
Florian Fainelli 763b58c30c update to 2.6.39.1
patch from Peter Wagner

SVN-Revision: 27104
2011-06-04 13:35:55 +00:00
Gabor Juhos 13363d9129 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27102
2011-06-04 12:30:10 +00:00
Gabor Juhos ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards
SVN-Revision: 27101
2011-06-04 12:30:09 +00:00
Florian Fainelli 0de25d1263 update to 2.6.39
SVN-Revision: 27090
2011-06-02 13:45:20 +00:00
Felix Fietkau 31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..."
It messes up the DMA state when the link goes down

SVN-Revision: 27088
2011-06-01 18:15:43 +00:00
Gabor Juhos 750af1522b ar71xx: init external_reset for AR933X
SVN-Revision: 27083
2011-06-01 13:12:30 +00:00
Gabor Juhos af4cae4498 ar71xx: add external_reset field to ath9k_platform_data
SVN-Revision: 27082
2011-06-01 13:12:28 +00:00
Gabor Juhos f0c7b93e5d ar71xx: init get_mac_revision on AR9330 rev 1
SVN-Revision: 27081
2011-06-01 13:12:27 +00:00
Gabor Juhos 1a54e33c17 ar71xx: add get_mac_revision to ath9k_platform_data
SVN-Revision: 27080
2011-06-01 13:12:26 +00:00
Gabor Juhos 34ff32a6eb ar71xx: export SoC revision
SVN-Revision: 27079
2011-06-01 13:12:24 +00:00
Imre Kaloz 2440175978 refresh patches
SVN-Revision: 27078
2011-06-01 07:24:41 +00:00
Imre Kaloz aafa838d77 fixup second led, patch from Chris
SVN-Revision: 27077
2011-06-01 07:21:25 +00:00
Felix Fietkau 86dbc3a02d ar71xx: add profile and image building code for wzr-hp-ag300h
SVN-Revision: 27076
2011-06-01 02:23:30 +00:00
Felix Fietkau 4f06b8263a ar71xx: add kernel support for the buffalo wzr-hp-ag300h
SVN-Revision: 27075
2011-06-01 02:23:26 +00:00
Felix Fietkau 56dd5c4388 fix a crash in mtd_concat when the .sync op is not implemented
SVN-Revision: 27074
2011-06-01 02:23:22 +00:00
Felix Fietkau 628cb35179 m25p80: add the chip id for the winbond w25q128 chip
SVN-Revision: 27073
2011-06-01 02:23:18 +00:00
Imre Kaloz acbb2db5e2 fixup pcie clock, thanks Chris
SVN-Revision: 27072
2011-05-31 23:55:33 +00:00
Gabor Juhos 33fdc21d40 ar71xx: build images for the AP121 boards
SVN-Revision: 27070
2011-05-31 22:53:47 +00:00
Gabor Juhos 9e435c03e0 ar71xx: add sysupgrade support for the AP121 boards
SVN-Revision: 27069
2011-05-31 22:53:45 +00:00
Gabor Juhos 646937135f ar71xx: add default network config for the AP121 boards
SVN-Revision: 27068
2011-05-31 22:53:44 +00:00
Gabor Juhos f332dbd7be ar71xx: add support for the AP121/AP121-MINI reference boards
SVN-Revision: 27067
2011-05-31 22:53:43 +00:00
Gabor Juhos 8beff081eb ar71xx: register UART for the AR933X SoCs
SVN-Revision: 27066
2011-05-31 22:53:42 +00:00
Gabor Juhos b460bc6f12 ar71xx: add serial driver for the AR933X UART
SVN-Revision: 27065
2011-05-31 22:53:40 +00:00
Gabor Juhos c34e0cbc4c ar71xx: add WMAC initialization code for the AR933X SoCs
SVN-Revision: 27064
2011-05-31 22:53:39 +00:00
Gabor Juhos e8a0aaf9a2 ar71xx: add ethernet initialization for the AR933X SoCs
SVN-Revision: 27063
2011-05-31 22:53:37 +00:00
Gabor Juhos e0a0f3796a ar71xx: enable USB support for the AR933x SoCs
SVN-Revision: 27062
2011-05-31 22:53:36 +00:00
Gabor Juhos 677c80ee17 ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
SVN-Revision: 27061
2011-05-31 22:53:35 +00:00
Gabor Juhos 88c45e3130 ar71xx: the watchdog uses the reference clock on the AR933x SoCs
SVN-Revision: 27060
2011-05-31 22:53:34 +00:00
Gabor Juhos 7acbacab8c ar71xx: add AR933x specific glue code for IRQ initialization
SVN-Revision: 27059
2011-05-31 22:53:32 +00:00