Commit Graph

153 Commits (d8722fac7046020715c41106df28371f3f521132)

Author SHA1 Message Date
Gabor Juhos 91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
2011-11-01 11:20:52 +00:00
Gabor Juhos 43e2e2e4ef ar71xx: combine LEDs setup in one file
SVN-Revision: 28704
2011-11-01 11:20:49 +00:00
Gabor Juhos f372620ffa ar71xx: unify LED names on Planex boards
SVN-Revision: 28703
2011-11-01 11:20:47 +00:00
Gabor Juhos 66ab406d5a ar71xx: unify LED names on Buffalo boards
SVN-Revision: 28702
2011-11-01 11:20:46 +00:00
Gabor Juhos e7586959df ar71xx: unify LED names on TP-Link boards
SVN-Revision: 28701
2011-11-01 11:20:44 +00:00
Gabor Juhos 3a7b12a27d ar71xx/all0258n: sysupgrade support
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28700
2011-11-01 09:23:32 +00:00
Gabor Juhos f40557a692 ar71xx/all0258n: add default config
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28699
2011-11-01 09:23:31 +00:00
Gabor Juhos 06d9653b36 ar71xx: remove default network config of the mzk-w04nu board as well
It works with the generic config.

SVN-Revision: 28695
2011-11-01 09:23:25 +00:00
Gabor Juhos 693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750
SVN-Revision: 28693
2011-10-31 14:26:56 +00:00
Gabor Juhos 2bcd612e72 ar71xx: remove default network config of the wnr2000 board
It is the same as the generic configuration.

SVN-Revision: 28692
2011-10-31 14:26:51 +00:00
Gabor Juhos 39b3bfcf6a ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28678
2011-10-30 13:06:30 +00:00
Gabor Juhos 1646346798 ar71xx: add initial support for the OpenMesh OM2P board
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
2011-10-27 07:54:51 +00:00
Gabor Juhos 9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
2011-10-24 21:49:26 +00:00
Gabor Juhos d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
2011-10-24 21:49:21 +00:00
Jo-Philipp Wich b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275)
SVN-Revision: 28562
2011-10-24 21:35:43 +00:00
Jonas Gorski a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G
SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
Gabor Juhos e45d7d7006 ar71xx: enable login only on the system console by default
SVN-Revision: 28294
2011-09-23 19:56:38 +00:00
Gabor Juhos 733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
Gabor Juhos 85b858fae6 ar71xx: enable sysupgrade on the AP96 and DB120 boards
SVN-Revision: 27901
2011-08-04 19:41:18 +00:00
Gabor Juhos fb77134596 ar71xx: use the same test for AP121 and Zcomax sysupgrade images
SVN-Revision: 27900
2011-08-04 19:41:17 +00:00
Jonas Gorski e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
Felix Fietkau 7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650)
SVN-Revision: 27434
2011-07-04 03:03:34 +00:00
Jo-Philipp Wich 701543d3ef revert r27043 (#9513)
SVN-Revision: 27343
2011-07-01 19:52:57 +00:00
Jo-Philipp Wich 1edef5ec98 revert r27341, it introduce wrong behaviour for other models
SVN-Revision: 27342
2011-07-01 19:15:45 +00:00
Jo-Philipp Wich 3b3103b2f1 turn status LED off if device finished initializing
SVN-Revision: 27341
2011-07-01 18:39:53 +00:00
Felix Fietkau cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607)
SVN-Revision: 27283
2011-06-25 13:54:42 +00:00
Vasilis Tsiligiannis 70106f153d Remove trailing spaces, convert spaces to tabs
SVN-Revision: 27153
2011-06-09 19:30:50 +00:00
Felix Fietkau 9160e06af5 ar71xx: override inittab to enable login on ttyATH0
SVN-Revision: 27128
2011-06-07 17:07:10 +00:00
Gabor Juhos 9e435c03e0 ar71xx: add sysupgrade support for the AP121 boards
SVN-Revision: 27069
2011-05-31 22:53:45 +00:00
Gabor Juhos 646937135f ar71xx: add default network config for the AP121 boards
SVN-Revision: 27068
2011-05-31 22:53:44 +00:00
Gabor Juhos 650c7cc2fd ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
SVN-Revision: 27043
2011-05-31 22:53:13 +00:00
Gabor Juhos 4834fdaccd ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
SVN-Revision: 27042
2011-05-31 22:53:12 +00:00
Gabor Juhos b39eebdf1e ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861
2011-05-08 21:38:49 +00:00
Gabor Juhos 858e2e719b ar71xx: use phy0tpt trigger for the WLAN LEDs
SVN-Revision: 26860
2011-05-08 21:38:48 +00:00
Felix Fietkau cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
SVN-Revision: 26779
2011-04-28 21:27:42 +00:00
Alexandros C. Couloumbis f13581eedb linux/ar71xx: update wget2nand script
SVN-Revision: 26747
2011-04-21 12:38:25 +00:00
Gabor Juhos e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
SVN-Revision: 26603
2011-04-12 09:29:21 +00:00
Gabor Juhos 54ede24829 ar71xx: Add support for WZR-HP-G301NH
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
2011-04-12 09:29:10 +00:00
Felix Fietkau 784d808d07 ar71xx: add default configuration for the switch on AP96
Enables forwarding of frames between the switch ports (eth0).
Patch by Jouni Malinen

SVN-Revision: 26180
2011-03-15 19:51:42 +00:00
Gabor Juhos 8eb616de82 ar71xx: add support for the TP-Link TL-WA901ND v2 board
Patch-by: Jonathan Benett <jbscience87@gmail.com>

SVN-Revision: 26119
2011-03-13 15:08:31 +00:00
Gabor Juhos 67c3e0bf7e ar71xx: add support for the WNDR3700v2 board
Based on a patch by Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25118
2011-01-26 20:35:42 +00:00
Gabor Juhos 061228d73c ar71xx: make uci-default scripts executable
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>

SVN-Revision: 24897
2011-01-04 13:44:01 +00:00
Claudio Mignanti 2c0596cd69 unifi: add sysupgrade and leds support
SVN-Revision: 24737
2010-12-20 17:28:34 +00:00
Gabor Juhos e7ea6387a3 ar71xx: use usbdev trigger for USB LEDs by default
SVN-Revision: 24648
2010-12-17 17:10:16 +00:00
Gabor Juhos a26c3e60e2 ar71xx: populate LED configuration for WZR-HP-G300NH
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

SVN-Revision: 24642
2010-12-17 17:09:57 +00:00
Gabor Juhos a2a5598c00 ar71xx: add wlan led for the TL-WR941ND
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
Gabor Juhos 9f38f9bf76 ar71xx: add missing files for the JA76PF board
SVN-Revision: 24444
2010-12-10 19:55:28 +00:00
Gabor Juhos b680f088ba ar71xx: add support for the jjPlus JA79PF
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
2010-12-10 17:57:51 +00:00
Gabor Juhos 5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board
SVN-Revision: 24439
2010-12-10 17:57:48 +00:00
Gabor Juhos 83834da33b ar71xx: add default network configuration file for the TL-MR3420
SVN-Revision: 24437
2010-12-10 17:57:40 +00:00