hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ar71xx: Add support for WZR-HP-G301NH 

Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
lede-17.01
Gabor Juhos 2011-04-12 09:29:10 +00:00
parent f358166236
commit 54ede24829
9 changed files with 90 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network Normal file
View File

@ -0,0 +1,26 @@
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option ifname eth0.1
option type bridge
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
config interface wan
option ifname eth1
option proto dhcp
config switch
option name rtl8366rb
option reset 1
option enable_vlan 1
config switch_vlan
option device rtl8366rb
option vlan 1
option ports "0 1 2 3 5t"

2
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -123,7 +123,7 @@ get_status_led() {
wrt160nl)
status_led="wrt160nl:blue:wps"
;;
wzr-hp-g300nh)
wzr-hp-g300nh | wzr-hp-g301nh)
status_led="wzr-hp-g300nh:green:router"
;;
zcn-1523h-2 | zcn-1523h-5)

2
target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh
View File

@ -32,6 +32,6 @@ commit system
EOF
}
if [ "${board}" == "wzr-hp-g300nh" ]; then
if [ "${board}" == "wzr-hp-g300nh" || "${board}" == "wzr-hp-g301nh" ]; then
wzrhpg300nh_set_leds
fi

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -148,6 +148,9 @@ ar71xx_board_name() {
*WZR-HP-G300NH)
name="wzr-hp-g300nh"
;;
*WZR-HP-G301NH)
name="wzr-hp-g301nh"
;;
*ZCN-1523H-2)
name="zcn-1523h-2"
;;

2
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -69,7 +69,7 @@ platform_check_image() {
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh | nbg460n_550n_550nh | unifi )
ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh | wzr-hp-g301nh | nbg460n_550n_550nh | unifi )
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1

54
target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
View File

@ -13,6 +13,7 @@
#include <linux/mtd/partitions.h>
#include <linux/nxp_74hc153.h>
#include <linux/rtl8366s.h>
#include <linux/rtl8366rb.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@ -225,21 +226,43 @@ static struct platform_device wzrhpg300nh_rtl8366s_device = {
}
};
static void __init wzrhpg300nh_setup(void)
static struct rtl8366rb_platform_data wzrhpg301nh_rtl8366rb_data = {
.gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
.gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
};
static struct platform_device wzrhpg301nh_rtl8366rb_device = {
.name = RTL8366RB_DRIVER_NAME,
.id = -1,
.dev = {
.platform_data = &wzrhpg301nh_rtl8366rb_data,
}
};
static void __init wzrhpg30xnh_setup(bool hasrtl8366rb)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
if (hasrtl8366rb) {
ar71xx_eth0_pll_data.pll_1000 = 0x1f000000;
ar71xx_eth0_data.mii_bus_dev = &wzrhpg301nh_rtl8366rb_device.dev;
ar71xx_eth1_pll_data.pll_1000 = 0x100;
ar71xx_eth1_data.mii_bus_dev = &wzrhpg301nh_rtl8366rb_device.dev;
} else {
ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
}
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
@ -251,7 +274,11 @@ static void __init wzrhpg300nh_setup(void)
platform_device_register(&wzrhpg300nh_74hc153_device);
platform_device_register(&wzrhpg300nh_flash_device);
platform_device_register(&wzrhpg300nh_rtl8366s_device);
if (hasrtl8366rb)
platform_device_register(&wzrhpg301nh_rtl8366rb_device);
else
platform_device_register(&wzrhpg300nh_rtl8366s_device);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
wzrhpg300nh_leds_gpio);
@ -262,5 +289,18 @@ static void __init wzrhpg300nh_setup(void)
}
static void __init wzrhpg300nh_setup(void)
{
wzrhpg30xnh_setup(false);
}
static void __init wzrhpg301nh_setup(void)
{
wzrhpg30xnh_setup(true);
}
MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
"Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
MIPS_MACHINE(AR71XX_MACH_WZR_HP_G301NH, "WZR-HP-G301NH",
"Buffalo WZR-HP-G301NH", wzrhpg301nh_setup);

1
target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
View File

@ -61,6 +61,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
AR71XX_MACH_WZR_HP_G301NH, /* Buffalo WZR-HP-G301NH */
AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */

10
target/linux/ar71xx/generic/profiles/buffalo.mk
View File

@ -5,13 +5,13 @@
# See /LICENSE for more information.
#
define Profile/WZRHPG300NH
NAME:=Buffalo WZR-HP-G300NH
define Profile/WZRHPG30XNH
NAME:=Buffalo WZR-HP-G30XNH
PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
endef
define Profile/WZRHPG300NH/Description
Package set optimized for the Buffalo WZR-HP-G300NH
define Profile/WZRHPG30XNH/Description
Package set optimized for the Buffalo WZR-HP-G300NH and WZR-HP-G301NH
endef
$(eval $(call Profile,WZRHPG300NH))
$(eval $(call Profile,WZRHPG30XNH))

9
target/linux/ar71xx/image/Makefile
View File

@ -118,7 +118,7 @@ define Image/Build/DIR825B1
fi; fi
endef
define Image/Build/WZRHPG300NH
define Image/Build/WZRHPG30XNH
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1048576 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
@ -688,8 +688,9 @@ define Image/Build/Profile/WRT160NL
$(call Image/Build/Template/$(fs_64k)/$(1),CyberTAN,wrt160nl,board=WRT160NL,1.00.01)
endef
define Image/Build/Profile/WZRHPG300NH
$(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG300NH,wzr-hp-g300nh,board=WZR-HP-G300NH)
define Image/Build/Profile/WZRHPG30XNH
$(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g300nh,board=WZR-HP-G300NH)
$(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g301nh,board=WZR-HP-G301NH)
endef
define Image/Build/Profile/ZCN1523H28
@ -740,7 +741,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/AP96,$(1))
$(call Image/Build/Profile/WRT400N,$(1))
$(call Image/Build/Profile/WRT160NL,$(1))
$(call Image/Build/Profile/WZRHPG300NH,$(1))
$(call Image/Build/Profile/WZRHPG30XNH,$(1))
$(call Image/Build/Profile/ZCN1523H28,$(1))
$(call Image/Build/Profile/ZCN1523H516,$(1))
endef