4ccf215a3e
ar7: remove leftover 3.10 patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43746
2014-12-18 11:57:42 +00:00
4571fc780d
ar71xx: add support for qca956x soc
...
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.
tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43744
2014-12-18 11:28:53 +00:00
2f9b042d69
ar8216: Inline function ar8xxx_create_mii
...
Inline function ar8xxx_create_mii.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43743
2014-12-18 11:28:47 +00:00
2289c7a010
ar8216: Remove read/write/rmw member functions from ar8xxx_priv
...
Remove read/write/rmw member functions from ar8xxx_priv
There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43742
2014-12-18 11:28:39 +00:00
45a494b808
ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
...
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43741
2014-12-18 11:28:34 +00:00
0e7f844c66
ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
...
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43740
2014-12-18 11:28:28 +00:00
054767cebc
ar8216: remove unused function parameter in ar8327_led_register
...
Remove unused function parameter in ar8327_led_register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43739
2014-12-18 11:28:20 +00:00
e21e9c5548
bcm53xx: backport spi-nor changes and update bcm53xxspiflash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43738
2014-12-17 14:53:25 +00:00
d27c682def
kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation ( #17625 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43736
2014-12-17 12:27:14 +00:00
309e74b86d
kirkwood: add sheevaplug and derivatives
...
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
SVN-Revision: 43735
2014-12-17 08:33:55 +00:00
211cac98d5
Belkin AC 1750 DB (F9K1115v2) support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43734
2014-12-17 08:27:38 +00:00
0ffb7323d0
ralink: remove partitoon map from mt7621.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43720
2014-12-15 15:55:37 +00:00
dd9ca05249
bcm53xx: sysupgrade support for devices with serial flash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
c3e9796cd5
brcm47xx: extract magics from specific upgrade images (and still reject them)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43718
2014-12-15 11:09:14 +00:00
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
a5b6b7e419
brcm47xx: detect (and still reject for now) CyberTAN fw format
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43714
2014-12-15 09:59:44 +00:00
fbea00b031
ramips: update mtd patches to apply after changes from r43700
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43709
2014-12-15 09:10:43 +00:00
b5b4bdc066
brcm47xx: use separated function in upgrade to detect file type
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43708
2014-12-15 08:51:14 +00:00
2db6da5532
kirkwood: enable EA4500 switch on 3.18
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43704
2014-12-14 08:57:58 +00:00
374ab9decc
gemini: update usb driver and merge registers into one patch
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43703
2014-12-14 08:57:52 +00:00
fef7b4241f
gemini: merge register ethernet patches into one
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43702
2014-12-14 08:57:43 +00:00
6f2b7567b8
ralink: drop old pinmux nodes from dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43701
2014-12-14 08:57:16 +00:00
b1bfed548c
kernel: warn users to use the new (dedicated) firmware splitter
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43700
2014-12-14 00:35:03 +00:00
2b4fbeb6d4
kernel: move old firmware uimage splitter into separated patch
...
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43696
2014-12-13 20:06:47 +00:00
e984869e22
realview: drop old kernel configs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43692
2014-12-13 11:55:59 +00:00
cfe3280494
au1000: remove leftover 3.3 kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43691
2014-12-13 11:55:49 +00:00
511fadd857
au1000: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43690
2014-12-13 11:55:41 +00:00
0f25db1a7d
rb532: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43689
2014-12-13 11:55:32 +00:00
d34e2a337c
at91: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43688
2014-12-13 11:55:24 +00:00
45380ebd1a
brcm2708: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43687
2014-12-13 11:55:11 +00:00
170ce29617
ixp4xx: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43686
2014-12-13 11:55:04 +00:00
c7e8b5ebbd
lantiq: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43685
2014-12-13 11:54:57 +00:00
daeec86fba
mpc85xx: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43684
2014-12-13 11:54:49 +00:00
8692819c2c
netlogic: fix XLR network driver build
...
Backport an upstream submission to fix xlr_net
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43682
2014-12-13 08:08:30 +00:00
263070a2e7
ramips:Add support for Aigale Ai-BR100
...
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 43681
2014-12-13 08:07:03 +00:00
aa697f1313
mxs: indention and whitespace fixes
...
Align this file with the style of most other modules.mk.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43680
2014-12-13 08:06:22 +00:00
a28d07abbe
ar71xx: add an extra check on board_name for ath10k firmware patchs
...
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.
SVN-Revision: 43679
2014-12-13 08:06:01 +00:00
10dbdb28d7
oxnas: fix gpio-fan on kd20
...
define speed-map and include kmod-hwmon-gpiofan in kd20 profile
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43678
2014-12-13 08:04:54 +00:00
9013a144fd
oxnas: also make use of the GPIO poweroff driver
...
Works great to power-off the kd20 ;)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43677
2014-12-13 08:02:52 +00:00
4a7c88f139
kernel/generic: remove some left-over garbage from ledtrig patch
...
cosmetics. clean a style issue introduced by r43674.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43676
2014-12-13 08:00:22 +00:00
118534ea39
oxnas: use libata ledtrig support for kd20 hdd leds
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43675
2014-12-12 20:24:33 +00:00
ee6b5c6007
kernel/generic: add ledtrig support to libata
...
SVN-Revision: 43674
2014-12-12 20:24:21 +00:00
1701a9a4b9
oxnas: clean up default package selection
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43673
2014-12-12 20:24:13 +00:00
d7b4bf8966
kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
...
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43670
2014-12-12 17:14:14 +00:00
5b16fd1bf8
ar8216: enable cpu port to receive arp and broadcast frames for ar8236
...
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43668
2014-12-12 16:23:29 +00:00
6c4e7b22eb
ralink: fix lenovo y1 wan port mapping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43667
2014-12-12 16:17:31 +00:00
7068b7ed1c
oxnas: build S-ATA driver as a module
...
From: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43665
2014-12-12 16:17:13 +00:00
b1f7a027da
ralink: make uartf functional on AWM002
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43664
2014-12-12 16:17:03 +00:00
58a4113c5e
oxnas: use u-boot.bin in KDIR
...
This fixes building *u-boot-initramfs.bin images using ImageBuilder
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43663
2014-12-12 16:16:57 +00:00
8feb491156
sunxi: fix led on bananapi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43661
2014-12-12 16:11:17 +00:00
92cf73cf11
mxs: allow bootloader to pass kernel cmdline
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43657
2014-12-12 13:37:21 +00:00
a1467fb73b
mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding
...
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43656
2014-12-12 13:18:29 +00:00
f34dfaf249
mxs: add i2c and spi packages to profiles
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43651
2014-12-12 12:14:40 +00:00
50f9d27da8
mxs: fix automatic status led detection
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43650
2014-12-12 12:01:39 +00:00
1014bb0fb4
mxs: update dts file for Duckbill
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43649
2014-12-12 11:43:56 +00:00
2265c4db31
mxs: i2c changes - add package for i2c module - remove i2c debug
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43648
2014-12-12 11:39:22 +00:00
fc2dff246d
mxs: add kernel module for spi interface
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43647
2014-12-12 11:10:04 +00:00
276a732a77
mxs: make boardname consistent with other targets
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43646
2014-12-12 11:03:55 +00:00
a3eed6bc35
kernel: refresh patches
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43643
2014-12-11 23:29:07 +00:00
a2a6077fd0
kirkwood: sort 110-nas profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43642
2014-12-11 23:29:04 +00:00
21349229f7
au1000: revert 43626 due to syntax errors
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43641
2014-12-11 22:27:56 +00:00
ad35bcc41e
oxnas: use ARM BCJ filter for XZ decompression
...
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.
in include/image.mk: BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43640
2014-12-11 20:41:51 +00:00
3aaee1ba02
bcm53xx: failsafe support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
bb4ffcf928
xburst: fix subtarget config file names
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43637
2014-12-11 20:07:52 +00:00
4b80e52575
x86: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43636
2014-12-11 20:07:45 +00:00
3cc3c0a518
octeon: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43635
2014-12-11 20:07:39 +00:00
c095c7c202
adm8668: remove linux 3.3 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43634
2014-12-11 20:07:31 +00:00
b7b52ce7de
ar7: remove config-3.10
...
Remove a leftover file from the 3.10 support removal.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43632
2014-12-11 19:35:43 +00:00
6f4656c19b
netlogic: sync kernel config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43630
2014-12-11 18:58:12 +00:00
1ef2106725
ralink: mt7621 was missing a symbol that made the CC builder fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43629
2014-12-11 18:54:30 +00:00
ce06a742c9
mcp85xx/p1020: fixup config-default
...
this was missed during the 3.14 bump
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43628
2014-12-11 18:39:22 +00:00
6d52fd203d
kernel/modules: fix chipidea
...
it should needs to depend on imx and mxs
also remove duplicate kmod definition from mxs target
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43627
2014-12-11 18:35:41 +00:00
ed61e202a1
au1000: distinguish different models and set correct MAC-address
...
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43626
2014-12-11 18:28:44 +00:00
1558a6bcbf
mpc85xx: fix another typo in the image makefile
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43625
2014-12-11 18:18:16 +00:00
5c89c4a5de
mpc85xx: add missing devicetree ranges property for ethernet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43624
2014-12-11 18:18:10 +00:00
4db5bc59b1
mpc85xx: fix typo in image name
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43622
2014-12-11 17:52:12 +00:00
db9f9a6407
sdk: add missing kernel include files
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43621
2014-12-11 17:03:04 +00:00
2d9d3e7163
mpc85xx: fix initramfs images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43620
2014-12-11 15:29:39 +00:00
b55199cf41
bcm53xx: support LEDs on Buffalo devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43616
2014-12-11 11:23:26 +00:00
9a74026206
kirkwood: add 3.18 support
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43613
2014-12-11 01:20:41 +00:00
40d94a3ef0
bcm53xx: backport NVRAM driver sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43612
2014-12-10 21:50:57 +00:00
ba81966001
bcm53xx: use bcma callback in SPROM driver to fill the SPROM
...
This is required because it has to be called at very precise moment. See
comment in driver for details.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43611
2014-12-10 21:24:11 +00:00
b0b43e1ef9
bcm53xx: use static NVRAM pointer for now
...
This will allow us to sync with code sent for upstream.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43608
2014-12-10 19:56:56 +00:00
a1da38f7b1
kernel: drop CONFIG_PROC_DEVICETREE in 3.18
...
This option was removed in upstream commit 8357041.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43607
2014-12-10 18:55:53 +00:00
960130e99c
bcm53xx: clean up nvram header
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43606
2014-12-10 18:29:26 +00:00
fa5f896cb7
kernel: add missing config symbols for 3.18
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43605
2014-12-10 18:13:34 +00:00
7093580424
bcm53xx: move SPROM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43604
2014-12-10 18:07:01 +00:00
27a91a99d9
bcm53xx: move NVRAM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43603
2014-12-10 18:01:24 +00:00
3fab0d818c
bcm53xx: move NVRAM header to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43602
2014-12-10 17:37:24 +00:00
9432cbd577
oxnas: add support for 2nd S-ATA port to sata_oxnas driver
...
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.
this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43598
2014-12-10 15:51:07 +00:00
1fa7c8587d
oxnas: add copyright header to sata_oxnas
...
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43597
2014-12-10 15:51:00 +00:00
fd492354bb
kernel: refresh patches
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43591
2014-12-09 23:29:52 +00:00
3b17625394
kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs
...
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43590
2014-12-09 23:29:49 +00:00
8c6f1412b1
ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43588
2014-12-09 12:28:46 +00:00
27f36718d3
kernel: add a patch to make netfilter conntrack cache routing information
...
Significantly improves routing / NAT performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43587
2014-12-09 11:01:49 +00:00
db04bbd2ec
ar71xx: remove another leftover broken chunk of code in the unaligned access hacks patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43586
2014-12-09 09:38:33 +00:00
613bc3ef3f
bcm53xx: bcm_nand: fix compilation
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43584
2014-12-08 18:28:54 +00:00
aed6b26431
bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43580
2014-12-08 17:39:07 +00:00
73237c0c9b
brcm47xx: add WNDR3400 V3 buttons
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43579
2014-12-08 17:02:28 +00:00
bdb1ee51f8
brcm63xx: fix a few issues in irq chip drivers
...
Fix locking and lock usage, making it compile for SMP.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43578
2014-12-08 16:11:52 +00:00
ed7d8a0450
brcm63xx: alphabetically order image generation
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43577
2014-12-08 16:11:32 +00:00
bc4dd8e119
brcm63xx: refresh patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43576
2014-12-08 16:11:26 +00:00
3fa17f6d58
brcm63xx: add DT support for USR9108
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43575
2014-12-08 16:11:08 +00:00
218582e8ea
brcm63xx: add DT support for F5D7633
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43574
2014-12-08 16:11:03 +00:00
d5f1dd9079
brcm63xx: add DT support for DG834GT/PN
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43573
2014-12-08 16:10:54 +00:00
b0ae41f849
brcm63xx: add DT support for TD-W8900GB
...
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43572
2014-12-08 16:10:46 +00:00
84200cf189
brcm63xx: add DT support for DSL-2640B
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43571
2014-12-08 16:10:41 +00:00
929ade0648
brcm63xx: add DT support for CPVA642
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43570
2014-12-08 16:10:17 +00:00
712f6ec52a
kernel: update linux 3.18 to final release
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43569
2014-12-08 13:16:35 +00:00
58de4a4759
kernel: backport an upstream xfrm crash fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43568
2014-12-08 12:50:37 +00:00
0cebaafa6e
kernel: add missing check for skb->dev on netfilter xfrm optimization patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43567
2014-12-08 12:21:17 +00:00
14a163ca58
kernel: remove the obsolete vm_exports patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43565
2014-12-08 12:04:34 +00:00
9a495f6bbb
kernel: refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
6327386aff
ar71xx: fix invalid pointer accesses caused by unaligned access hacks ( #18455 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43560
2014-12-08 10:48:28 +00:00
0f07e7c9a8
x86: update to linux 3.14
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43559
2014-12-08 10:04:50 +00:00
363b166eb9
x86: rename */config-3.10 to */config-default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43558
2014-12-08 10:04:45 +00:00
0485747912
kernel: fix x86 objdump invocation on 3.14 and 3.18
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43557
2014-12-08 10:04:39 +00:00
7c7964e10d
ar7: bump to 3.14
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43553
2014-12-08 06:15:03 +00:00
aba92ec05e
adm8668: switch to 3.14 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43552
2014-12-07 21:59:36 +00:00
06152c8abf
adm8668: add 3.14 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43551
2014-12-07 21:59:25 +00:00
356447e6c2
adm8668: rename files to files-3.3
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43550
2014-12-07 21:58:49 +00:00
bb9833a17a
cobalt: remove 3.3 and 3.10 kernel configuration files
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43549
2014-12-07 21:58:33 +00:00
4287370f76
cobalt: switch to 3.14 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43548
2014-12-07 21:58:22 +00:00
35e8cc2cdc
cobalt: add 3.14 kernel configuration file
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43547
2014-12-07 21:58:12 +00:00
7a2f186d70
bcm53xx: update the NAND driver
...
This adds some updates to the NAND driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43546
2014-12-07 21:55:21 +00:00
664ae86dde
bcm53xx: update the PCIe driver
...
This adds some updates to the PCIe driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43545
2014-12-07 21:54:53 +00:00
d9bb8326fa
kernel: update bcma and ssb to wireless-testing master-2014-12-05
...
This brings ssb and bcma to wireless-testing tag master-2014-12-05
In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43544
2014-12-07 21:53:20 +00:00
7a65768ddc
kirkwood: add a diag script
...
Currently only Linksys EA4500 is supported.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 43543
2014-12-07 16:53:37 +00:00
8a123f6f66
ramips: generate factory images for Nexx devices
...
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 43541
2014-12-07 16:53:22 +00:00
3572657c5a
ar71xx: dev-eth: replace mdelay calls
...
Similar to patch 2. Replace further mdelay calls.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43540
2014-12-07 16:53:15 +00:00
59e7999a44
ag71xx: replace delay with sleep calls
...
I don't see that we're in an atomic context so there's no need to
busy-wait. Therefore replace the delay with sleep calls.
See also Documentation/timers/timers-howto.txt. It states:
"In general, use of mdelay is discouraged and code should
be refactored to allow for the use of msleep."
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43539
2014-12-07 16:53:09 +00:00
4caa8d50ad
ag71xx: replace fixed PHY reset wait time in ar7240sw_setup
...
Replace the fixed wait time of 1s with polling for BMCR_RESET
to be cleared on all PHYs.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43538
2014-12-07 16:52:58 +00:00
563f963b1b
kernel: refresh patches for kernel 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
8e738da02c
brcm47xx: remove kernel 3.10
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43535
2014-12-07 15:34:28 +00:00
dc6171c734
bcm53xx: 3.18: add early support for Buffalo WZR-900DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43534
2014-12-07 11:02:52 +00:00
a20fa1cb48
bcm53xx: add early support for Buffalo WZR-900DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43533
2014-12-07 10:55:44 +00:00
1020b84266
brcm47xx: add early support for WNDR3400 V3
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
9bec9b86af
bcm53xx: backport BCM5301X patches from arm-soc.git next/dt
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43530
2014-12-05 16:46:55 +00:00
d1e0e39993
bcm53xx: squeeze (rename) BCM5301X patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43529
2014-12-05 16:15:16 +00:00
8ea3c20b23
bcm53xx: rename patches that were not upstreamed to 3xx
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43528
2014-12-05 16:13:27 +00:00
8033ccc975
kernel: update bcma up to 2014-10-27
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43527
2014-12-05 16:11:03 +00:00
c79ddb3773
octeon: sysupgrade: support config restore on ERL
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43524
2014-12-05 08:58:25 +00:00
1731d5520e
octeon: sysupgrade: rename old kernel after mounting /boot
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43523
2014-12-05 08:58:18 +00:00
52f1d8ecdc
octeon: sysupgrade: fix test for rootfs device
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43522
2014-12-05 08:58:06 +00:00
dcc20e525b
oxnas: switch back to kernel 3.14
...
3.18 still got problems with stuck reboots if rootfs is ubifs...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43521
2014-12-05 00:20:50 +00:00
e553dfc356
oxnas: re-add support for kernel 3.14
...
This reverts commit c81ddddde5fd193802d511b42eb7b108aac17136 on
https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git
which removed patches and config for 3.14.
[arm_introduce-dma-fiq-irq-broadcast patch was renamed to match 3.18]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43520
2014-12-05 00:20:41 +00:00
dcc8a8ca9e
octeon: add support for 3.18 kernel
...
Runtime tested on Ubiquiti EdgeRouter Lite.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43519
2014-12-05 00:20:10 +00:00
6f665ea7b8
octeon: sysupgrade: support config restore
...
SVN-Revision: 43518
2014-12-05 00:19:59 +00:00
28a9d9853b
octeon: sysupgrade: get rootfsdev from kernel cmdline
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43517
2014-12-05 00:19:46 +00:00
e6858f5f3f
amazon: R.I.P.
...
its been broken for 2 1/2 years
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43516
2014-12-05 00:19:40 +00:00
d04c4a311e
ralink: mt7621 is a 1004Kc
...
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 43514
2014-12-03 20:22:42 +00:00
426467beba
kernel: add missing null pointer check for mips dma ops inline patch on 3.18
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43511
2014-12-03 18:17:17 +00:00
a21c9fd655
kernel: make the ubi attach patch check for a valid ubi magic rather than a tar magic
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43507
2014-12-03 16:05:06 +00:00
a10a204aab
kernel: make ubi auto-attach check for a tar file magic
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43506
2014-12-03 14:32:38 +00:00
8a9979e57a
gemini: update ethernet driver, register ethernet on nas4220 board
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43501
2014-12-02 18:27:54 +00:00
a122c1c9c9
oxnas: switch CRC32 implementation to SLICEBY8
...
similar to what was observed on kirkwood this significantly accelerates
btrfs write operations.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43498
2014-12-02 15:25:28 +00:00
9430e86b61
oxnas/kd20: add usb-storage to default package set
...
KD20 got a built-in card-reader wired to the USB-3 root-hub.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43497
2014-12-02 15:25:14 +00:00
46814be2a8
oxnas/kd20: use gpio-beeper
...
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43496
2014-12-02 15:25:09 +00:00
ae51d64671
au1000: set 3.14 as default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43494
2014-12-02 15:23:37 +00:00
f11b61ae18
realview: refresh kernel patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43491
2014-12-02 13:14:59 +00:00
417e67b6b1
realview: fix up the phyoffset patch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43488
2014-12-01 21:45:18 +00:00
b5675ad92a
kirkwood: enable mvsw6171 switch driver on EA4500
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43487
2014-12-01 21:30:40 +00:00
9b5f583906
kernel: add driver for Marvell 88E6171 switch
...
This is a swconfig driver for the Marvell 88E6171 switch,
which is a 7-port GigE switch with two CPU ports and 64
802.1q VLANs.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43486
2014-12-01 21:30:35 +00:00
374f8a04e1
malta: set 3.14 as default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43481
2014-12-01 18:46:29 +00:00
d1c0a65266
kernel: update 3.18 to rc7
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43479
2014-12-01 17:38:54 +00:00
ad1592e02c
oxnas: change visible board name
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43475
2014-12-01 16:15:37 +00:00
aa9141046f
oxnas: ehci: rename vendor prefix plxtch to plxtech
...
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43474
2014-12-01 16:15:30 +00:00
ecd27db757
ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip
...
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43471
2014-12-01 16:15:08 +00:00
ae15531bd2
ar8216: factor out mii_lo_first to ar8xxx_chip
...
Factor out mii_lo_first to ar8xxx_chip.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43470
2014-12-01 16:15:02 +00:00
ea9324f3d3
ar8216: factor out chip-specific data structures from ar8xxx_priv
...
Factor out chip-specific data structures from ar8xxx_priv.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43469
2014-12-01 16:14:54 +00:00
a3b651635f
ar8216: factor out set_mirror_regs to ar8xxx_chip
...
Factor out set_mirror_regs to ar8xxx_chip.
Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43468
2014-12-01 16:14:43 +00:00
b82a08f5b6
ar8216: factor out mib_func to ar8xxx_chip
...
Factor out mib_func to ar8xxx_chip. Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43467
2014-12-01 16:14:39 +00:00
af003867b1
ar8216: factor out info whether switch should be configured at probe stage to ar8xxx_chip
...
Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43466
2014-12-01 16:14:32 +00:00
84df2274ff
realview: add 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43465
2014-12-01 16:14:26 +00:00
c27ee280ce
ixp4xx: add 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43464
2014-12-01 16:14:21 +00:00
00f5d358ac
au1000: add 3.14 support
...
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43463
2014-12-01 16:14:07 +00:00
610311436e
ar71xx: Add build profile for the gl-inet 6416A and 6408A
...
Patch to add the buildprofile for the GL-Init-6408A-v1 and the GL-Inet-6416A-v1
Both devices are identical, only difference is one comes with 8MB flash and
the other with 16MB flash
Official website: http://www.gl-inet.com/w/?page_id=241&lang=en
Comprehensive list of specs: https://revspace.nl/GL-Inet
Signed-off-by: Martijn Zilverschoon <martijn@friedzombie.com>
SVN-Revision: 43462
2014-12-01 16:14:02 +00:00
387fd3ca26
brcm63xx: add kernel 3.18 support
...
Add 3.18 support based on 3.18-rc6. Only netboot tested.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43461
2014-12-01 13:27:26 +00:00
e8068f0b1b
brcm63xx: register interrupt-controllers through DT when possible
...
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43457
2014-12-01 00:52:07 +00:00
443d730da8
brcm63xx: dtsi: add missing ranges properity to ubus nodes
...
Allows nodes behind it to be mapped.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43456
2014-12-01 00:51:56 +00:00
d9a2c55806
brcm63xx: dtsi: add missing properties to cpu nodes
...
Mark them as cpu nodes and add the addresses.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43455
2014-12-01 00:51:53 +00:00
ef4f69adc0
brcm63xx: convert to irq domain
...
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43454
2014-12-01 00:51:51 +00:00
bb312899f6
brcm63xx: refresh patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43453
2014-12-01 00:51:24 +00:00
2b46097364
brcm63xx: add DT support for DSL-2650U
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43452
2014-12-01 00:51:17 +00:00
61637aea1b
brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43451
2014-12-01 00:51:12 +00:00
53214ca548
brcm63xx: Add DT support for F@ST2504n
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43450
2014-12-01 00:51:08 +00:00
40350a5daf
brcm63xx: add DT support for F@ST2704V2
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43449
2014-12-01 00:51:04 +00:00
3872151ce0
brcm63xx: add DT support for F@ST2604
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43448
2014-12-01 00:50:59 +00:00
5f726ccd79
brcm63xx: add DT support for F@ST2404
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43447
2014-12-01 00:50:56 +00:00
c691430897
kernel: add missing config symbol for 3.18
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43444
2014-11-30 22:12:20 +00:00
201af1b219
malta: add more 3.14 kernel symbols
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43435
2014-11-30 03:51:43 +00:00
7974f29558
kirkwood: change CRC32 implementation to CRC32_SLICEBY8
...
At least on my Iomega ix2-200 system, this makes btrfs writes about 30% faster.
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43434
2014-11-30 01:20:38 +00:00
5c4f9198bb
kirkwood: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43432
2014-11-30 01:14:14 +00:00
dac3d29ec5
generic: set CONFIG_GENERIC_NET_UTILS
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43431
2014-11-30 01:14:12 +00:00
070d3b27c2
kernel: update 3.14 to 3.14.25
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43427
2014-11-29 10:30:58 +00:00
d11aefc8eb
malta: add support for 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43426
2014-11-29 10:30:55 +00:00
eef7c35952
malta: drop 3.12 config file
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43425
2014-11-29 10:30:52 +00:00
0817bb762f
x86: add support for 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43422
2014-11-28 17:53:50 +00:00
d73dc14957
kernel: 3.18: Fix patch 644 dependency chain
...
This patch introduces some code that is compiled in whenever
CONFIG_BRIDGE_NETFILTER is built, with the code called from code compiled under
CONFIG_BRIDGE, CONFIG_BRIDGE_IGMP_SNOOPING or CONFIG_BRIDGE_NF_EBTABLES.
Unfortunately, these options aren't setting explicitly the dependency they now
have on CONFIG_BRIDGE_NETFILTER, for obvious reasons for CONFIG_BRIDGE.
However, this is not working really well when CONFIG_BRIDGE_NETFILTER is built
as a module, since code statically compiled will now use a function that is not
in the kernel image, which makes the linker grumpy.
Solve this by removing the option to build CONFIG_BRIDGE_NETFILTER as a module,
and protect our function definition by an IS_BUILTIN instead of a IS_ENABLED
macro. This fixes the issue for CONFIG_BRIDGE and CONFIG_BRIDGE_IGMP_SNOOPING.
Fixing CONFIG_BRIDGE_NF_EBTABLES has to be handled a bit differently, since it
directly references a variable that will not be declared if
CONFIG_BRIDGE_NETFILTER is not set. Protect the variable affectations by an
ifdef to make sure this doesn't happen.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43419
2014-11-28 01:29:51 +00:00
f473f95196
cns3xxx: fix PCIe->PCI bridge access ( fixes #18422 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43414
2014-11-27 20:54:18 +00:00
Felix Fietkau
Rafał Miłecki
Luka Perkov
Imre Kaloz
John Crispin
Florian Fainelli
Zoltan Herpai
Jonas Gorski
Hauke Mehrtens