e7d7f59171
bcm53xx: support WAN connected to switch port 0
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43754
2014-12-20 15:09:01 +00:00
0847247129
mvsw6171: note support for 88E6172 switches
...
The '6171 and '6172 are similar enough to work
without any changes to the code.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43753
2014-12-19 22:02:59 +00:00
873202fc0b
kirkwood: add *plugs to uci-defaults
...
Set defaults health led to a timer heartbeet (200/800)
and populate network for:
- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43752
2014-12-19 11:05:13 +00:00
39743e45f8
kikwood: populate kirkwood.sh with new boards
...
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43751
2014-12-18 18:38:43 +00:00
ec9a0f898a
kirkwood: set default EA4500 switch config
...
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43750
2014-12-18 18:38:38 +00:00
abca0462d3
kernel: bgmac: fix some problems
...
There are some problems in the napi usage that are fixed now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43749
2014-12-18 16:25:22 +00:00
192e945479
bcm53xx: PCIe: add link check again
...
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43748
2014-12-18 16:23:42 +00:00
4ccf215a3e
ar7: remove leftover 3.10 patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43746
2014-12-18 11:57:42 +00:00
4571fc780d
ar71xx: add support for qca956x soc
...
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.
tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43744
2014-12-18 11:28:53 +00:00
2f9b042d69
ar8216: Inline function ar8xxx_create_mii
...
Inline function ar8xxx_create_mii.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43743
2014-12-18 11:28:47 +00:00
2289c7a010
ar8216: Remove read/write/rmw member functions from ar8xxx_priv
...
Remove read/write/rmw member functions from ar8xxx_priv
There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43742
2014-12-18 11:28:39 +00:00
45a494b808
ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
...
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43741
2014-12-18 11:28:34 +00:00
0e7f844c66
ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
...
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43740
2014-12-18 11:28:28 +00:00
054767cebc
ar8216: remove unused function parameter in ar8327_led_register
...
Remove unused function parameter in ar8327_led_register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43739
2014-12-18 11:28:20 +00:00
e21e9c5548
bcm53xx: backport spi-nor changes and update bcm53xxspiflash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43738
2014-12-17 14:53:25 +00:00
d27c682def
kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation ( #17625 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43736
2014-12-17 12:27:14 +00:00
309e74b86d
kirkwood: add sheevaplug and derivatives
...
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
SVN-Revision: 43735
2014-12-17 08:33:55 +00:00
211cac98d5
Belkin AC 1750 DB (F9K1115v2) support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43734
2014-12-17 08:27:38 +00:00
0ffb7323d0
ralink: remove partitoon map from mt7621.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43720
2014-12-15 15:55:37 +00:00
dd9ca05249
bcm53xx: sysupgrade support for devices with serial flash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
c3e9796cd5
brcm47xx: extract magics from specific upgrade images (and still reject them)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43718
2014-12-15 11:09:14 +00:00
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
a5b6b7e419
brcm47xx: detect (and still reject for now) CyberTAN fw format
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43714
2014-12-15 09:59:44 +00:00
fbea00b031
ramips: update mtd patches to apply after changes from r43700
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43709
2014-12-15 09:10:43 +00:00
b5b4bdc066
brcm47xx: use separated function in upgrade to detect file type
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43708
2014-12-15 08:51:14 +00:00
2db6da5532
kirkwood: enable EA4500 switch on 3.18
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43704
2014-12-14 08:57:58 +00:00
374ab9decc
gemini: update usb driver and merge registers into one patch
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43703
2014-12-14 08:57:52 +00:00
fef7b4241f
gemini: merge register ethernet patches into one
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43702
2014-12-14 08:57:43 +00:00
6f2b7567b8
ralink: drop old pinmux nodes from dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43701
2014-12-14 08:57:16 +00:00
b1bfed548c
kernel: warn users to use the new (dedicated) firmware splitter
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43700
2014-12-14 00:35:03 +00:00
2b4fbeb6d4
kernel: move old firmware uimage splitter into separated patch
...
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43696
2014-12-13 20:06:47 +00:00
e984869e22
realview: drop old kernel configs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43692
2014-12-13 11:55:59 +00:00
cfe3280494
au1000: remove leftover 3.3 kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43691
2014-12-13 11:55:49 +00:00
511fadd857
au1000: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43690
2014-12-13 11:55:41 +00:00
0f25db1a7d
rb532: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43689
2014-12-13 11:55:32 +00:00
d34e2a337c
at91: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43688
2014-12-13 11:55:24 +00:00
45380ebd1a
brcm2708: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43687
2014-12-13 11:55:11 +00:00
170ce29617
ixp4xx: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43686
2014-12-13 11:55:04 +00:00
c7e8b5ebbd
lantiq: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43685
2014-12-13 11:54:57 +00:00
daeec86fba
mpc85xx: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43684
2014-12-13 11:54:49 +00:00
8692819c2c
netlogic: fix XLR network driver build
...
Backport an upstream submission to fix xlr_net
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43682
2014-12-13 08:08:30 +00:00
263070a2e7
ramips:Add support for Aigale Ai-BR100
...
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 43681
2014-12-13 08:07:03 +00:00
aa697f1313
mxs: indention and whitespace fixes
...
Align this file with the style of most other modules.mk.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43680
2014-12-13 08:06:22 +00:00
a28d07abbe
ar71xx: add an extra check on board_name for ath10k firmware patchs
...
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.
SVN-Revision: 43679
2014-12-13 08:06:01 +00:00
10dbdb28d7
oxnas: fix gpio-fan on kd20
...
define speed-map and include kmod-hwmon-gpiofan in kd20 profile
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43678
2014-12-13 08:04:54 +00:00
9013a144fd
oxnas: also make use of the GPIO poweroff driver
...
Works great to power-off the kd20 ;)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43677
2014-12-13 08:02:52 +00:00
4a7c88f139
kernel/generic: remove some left-over garbage from ledtrig patch
...
cosmetics. clean a style issue introduced by r43674.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43676
2014-12-13 08:00:22 +00:00
118534ea39
oxnas: use libata ledtrig support for kd20 hdd leds
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43675
2014-12-12 20:24:33 +00:00
ee6b5c6007
kernel/generic: add ledtrig support to libata
...
SVN-Revision: 43674
2014-12-12 20:24:21 +00:00
1701a9a4b9
oxnas: clean up default package selection
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43673
2014-12-12 20:24:13 +00:00
d7b4bf8966
kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
...
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43670
2014-12-12 17:14:14 +00:00
5b16fd1bf8
ar8216: enable cpu port to receive arp and broadcast frames for ar8236
...
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43668
2014-12-12 16:23:29 +00:00
6c4e7b22eb
ralink: fix lenovo y1 wan port mapping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43667
2014-12-12 16:17:31 +00:00
7068b7ed1c
oxnas: build S-ATA driver as a module
...
From: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43665
2014-12-12 16:17:13 +00:00
b1f7a027da
ralink: make uartf functional on AWM002
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43664
2014-12-12 16:17:03 +00:00
58a4113c5e
oxnas: use u-boot.bin in KDIR
...
This fixes building *u-boot-initramfs.bin images using ImageBuilder
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43663
2014-12-12 16:16:57 +00:00
8feb491156
sunxi: fix led on bananapi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43661
2014-12-12 16:11:17 +00:00
92cf73cf11
mxs: allow bootloader to pass kernel cmdline
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43657
2014-12-12 13:37:21 +00:00
a1467fb73b
mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding
...
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43656
2014-12-12 13:18:29 +00:00
f34dfaf249
mxs: add i2c and spi packages to profiles
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43651
2014-12-12 12:14:40 +00:00
50f9d27da8
mxs: fix automatic status led detection
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43650
2014-12-12 12:01:39 +00:00
1014bb0fb4
mxs: update dts file for Duckbill
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43649
2014-12-12 11:43:56 +00:00
2265c4db31
mxs: i2c changes - add package for i2c module - remove i2c debug
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43648
2014-12-12 11:39:22 +00:00
fc2dff246d
mxs: add kernel module for spi interface
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43647
2014-12-12 11:10:04 +00:00
276a732a77
mxs: make boardname consistent with other targets
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43646
2014-12-12 11:03:55 +00:00
a3eed6bc35
kernel: refresh patches
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43643
2014-12-11 23:29:07 +00:00
a2a6077fd0
kirkwood: sort 110-nas profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43642
2014-12-11 23:29:04 +00:00
21349229f7
au1000: revert 43626 due to syntax errors
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43641
2014-12-11 22:27:56 +00:00
ad35bcc41e
oxnas: use ARM BCJ filter for XZ decompression
...
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.
in include/image.mk: BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43640
2014-12-11 20:41:51 +00:00
3aaee1ba02
bcm53xx: failsafe support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
bb4ffcf928
xburst: fix subtarget config file names
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43637
2014-12-11 20:07:52 +00:00
4b80e52575
x86: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43636
2014-12-11 20:07:45 +00:00
3cc3c0a518
octeon: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43635
2014-12-11 20:07:39 +00:00
c095c7c202
adm8668: remove linux 3.3 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43634
2014-12-11 20:07:31 +00:00
b7b52ce7de
ar7: remove config-3.10
...
Remove a leftover file from the 3.10 support removal.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43632
2014-12-11 19:35:43 +00:00
6f4656c19b
netlogic: sync kernel config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43630
2014-12-11 18:58:12 +00:00
1ef2106725
ralink: mt7621 was missing a symbol that made the CC builder fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43629
2014-12-11 18:54:30 +00:00
ce06a742c9
mcp85xx/p1020: fixup config-default
...
this was missed during the 3.14 bump
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43628
2014-12-11 18:39:22 +00:00
6d52fd203d
kernel/modules: fix chipidea
...
it should needs to depend on imx and mxs
also remove duplicate kmod definition from mxs target
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43627
2014-12-11 18:35:41 +00:00
ed61e202a1
au1000: distinguish different models and set correct MAC-address
...
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43626
2014-12-11 18:28:44 +00:00
1558a6bcbf
mpc85xx: fix another typo in the image makefile
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43625
2014-12-11 18:18:16 +00:00
5c89c4a5de
mpc85xx: add missing devicetree ranges property for ethernet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43624
2014-12-11 18:18:10 +00:00
4db5bc59b1
mpc85xx: fix typo in image name
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43622
2014-12-11 17:52:12 +00:00
2d9d3e7163
mpc85xx: fix initramfs images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43620
2014-12-11 15:29:39 +00:00
b55199cf41
bcm53xx: support LEDs on Buffalo devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43616
2014-12-11 11:23:26 +00:00
9a74026206
kirkwood: add 3.18 support
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43613
2014-12-11 01:20:41 +00:00
40d94a3ef0
bcm53xx: backport NVRAM driver sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43612
2014-12-10 21:50:57 +00:00
ba81966001
bcm53xx: use bcma callback in SPROM driver to fill the SPROM
...
This is required because it has to be called at very precise moment. See
comment in driver for details.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43611
2014-12-10 21:24:11 +00:00
b0b43e1ef9
bcm53xx: use static NVRAM pointer for now
...
This will allow us to sync with code sent for upstream.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43608
2014-12-10 19:56:56 +00:00
a1da38f7b1
kernel: drop CONFIG_PROC_DEVICETREE in 3.18
...
This option was removed in upstream commit 8357041.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43607
2014-12-10 18:55:53 +00:00
960130e99c
bcm53xx: clean up nvram header
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43606
2014-12-10 18:29:26 +00:00
fa5f896cb7
kernel: add missing config symbols for 3.18
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43605
2014-12-10 18:13:34 +00:00
7093580424
bcm53xx: move SPROM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43604
2014-12-10 18:07:01 +00:00
27a91a99d9
bcm53xx: move NVRAM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43603
2014-12-10 18:01:24 +00:00
3fab0d818c
bcm53xx: move NVRAM header to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43602
2014-12-10 17:37:24 +00:00
9432cbd577
oxnas: add support for 2nd S-ATA port to sata_oxnas driver
...
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.
this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43598
2014-12-10 15:51:07 +00:00
1fa7c8587d
oxnas: add copyright header to sata_oxnas
...
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43597
2014-12-10 15:51:00 +00:00
fd492354bb
kernel: refresh patches
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43591
2014-12-09 23:29:52 +00:00
3b17625394
kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs
...
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43590
2014-12-09 23:29:49 +00:00
8c6f1412b1
ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43588
2014-12-09 12:28:46 +00:00
Rafał Miłecki
Luka Perkov
Hauke Mehrtens
Felix Fietkau
Imre Kaloz
John Crispin
Florian Fainelli
Zoltan Herpai
Jonas Gorski