Commit Graph

7163 Commits (bb64fb2e58cdb2ea92120b9e63bdc4a8b03685cb)

Author SHA1 Message Date
Jonas Gorski 61e2e03311 kernel: Fix firewire for 2.6.37+
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.

SVN-Revision: 27874
2011-08-02 09:53:19 +00:00
Felix Fietkau e5e17a1ce8 imagebuilder: clean opkg files if requested (patch from #9866)
SVN-Revision: 27872
2011-08-01 23:58:11 +00:00
Felix Fietkau 62b8cba9c0 kernel: enable inotify by default (#8055)
SVN-Revision: 27853
2011-07-31 18:12:23 +00:00
Felix Fietkau 19eaf1c5f7 kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
SVN-Revision: 27840
2011-07-30 15:39:52 +00:00
Imre Kaloz e4b6839fd3 upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...)
SVN-Revision: 27826
2011-07-29 10:16:48 +00:00
Jonas Gorski e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
Gabor Juhos ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
Gabor Juhos 437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
Gabor Juhos 7193f29d96 ramips: rt305x: enable M25P80 driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
2011-07-28 10:56:28 +00:00
Gabor Juhos c6db514de8 ramips: rt305x: introduce rt305x_register_spi helper
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
Gabor Juhos 57122e7ccc ramips: add SPI controller driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
Gabor Juhos 3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
Gabor Juhos 857c1028ac ramips: rt305x: change machine id for DIR-300
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
Gabor Juhos 42d3a55347 ramips: rt305x: rename LEDs on the DIR-300-B1
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
Gabor Juhos 39689b648f ramips: rt305x: sort Kconfig/Makefile entries
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
Gabor Juhos 32c0534516 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

SVN-Revision: 27804
2011-07-28 10:56:18 +00:00
Gabor Juhos 57663ce25b ramips: fix PWH2004 image generation
SVN-Revision: 27803
2011-07-28 10:56:15 +00:00
Jonas Gorski eaa935658b swconfig: Add generic switch identifiers
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.

SVN-Revision: 27800
2011-07-27 18:00:18 +00:00
Felix Fietkau 4da138d899 x86/alix2: include WAN interface by default
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27787
2011-07-26 16:37:48 +00:00
Felix Fietkau 41db64f8e0 x86/alix2: fix typo in target makefile
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27786
2011-07-26 16:37:44 +00:00
Hauke Mehrtens 80956276a7 x86: add missing config symbols
This adds some config symbols for kernel 3.0.

Thank you realopty for the patch.

This is from #9719.

SVN-Revision: 27775
2011-07-25 21:21:01 +00:00
Jonas Gorski 4e6c93bef1 bcm63xx: Fix SPI commands and register offsets for BCM6348
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.

Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>

SVN-Revision: 27774
2011-07-25 19:52:47 +00:00
Imre Kaloz f0f10fa599 add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch
SVN-Revision: 27762
2011-07-24 22:04:08 +00:00
Jo-Philipp Wich f66871e836 From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua>
SVN-Revision: 27760
2011-07-24 15:37:00 +00:00
Jo-Philipp Wich 6eb9e39bc4 refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final
SVN-Revision: 27759
2011-07-24 15:36:33 +00:00
Hauke Mehrtens 4815eaa4c3 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.

SVN-Revision: 27758
2011-07-24 15:18:29 +00:00
Felix Fietkau 9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh
SVN-Revision: 27756
2011-07-24 14:40:35 +00:00
Felix Fietkau 5b32d62fcf rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB
SVN-Revision: 27755
2011-07-24 14:40:31 +00:00
Felix Fietkau 1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
Hauke Mehrtens 00dd85d8f6 ocf-linux: version bump to 20110720
Fixes problem with TFM allocation in cryptosoft.c

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

Hauke:
 * remove ubsec_ssb package and take it from ocf-linux
 * use patches from ocf-linux package
 * refresh all patches
 * readd some build fixes for OpenWrt.
 * readd CRYPTO_MANAGER dependency

SVN-Revision: 27753
2011-07-24 14:17:58 +00:00
Felix Fietkau b5e3f6cd81 x86: 2.6.39 requires additional symbol
Sysfs support for DMI BIOS was added in 2.6.39.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27749
2011-07-24 09:41:07 +00:00
Felix Fietkau a6f7e72cf7 atheros: fix mii phy read/write ioctl
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 27747
2011-07-24 09:11:10 +00:00
Felix Fietkau 6d3bddb056 geos: include pppstats and pppdump in default packaging
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27743
2011-07-24 08:41:58 +00:00
Felix Fietkau 9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684)
SVN-Revision: 27739
2011-07-24 08:02:20 +00:00
Imre Kaloz 193845ce7a upgrade to 3.0
SVN-Revision: 27738
2011-07-23 20:44:08 +00:00
Imre Kaloz 5e29e14795 upgrade to 3.0
SVN-Revision: 27737
2011-07-23 20:43:53 +00:00
Imre Kaloz 0cb1b5d775 3.0 is out
SVN-Revision: 27736
2011-07-23 20:42:58 +00:00
Hauke Mehrtens 49f4d4217e brcm47xx: build bcma into the kernel
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
2011-07-23 11:19:58 +00:00
Hauke Mehrtens 5169b72c8a kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing
SVN-Revision: 27731
2011-07-23 11:17:00 +00:00
Hauke Mehrtens b07b5fc7b6 brcm47xx: remove old kernel versions
SVN-Revision: 27724
2011-07-22 18:41:24 +00:00
Hauke Mehrtens b988168906 brcm47xx: update bcma and ssb to master-2011-07-21
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
2011-07-22 16:30:42 +00:00
Hauke Mehrtens 39f491e479 kernel: update to linux-3.0 and refresh patches.
Thank you Peter Wagner for the patch

SVN-Revision: 27722
2011-07-22 16:04:25 +00:00
Felix Fietkau c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240
SVN-Revision: 27705
2011-07-20 14:39:47 +00:00
Felix Fietkau ca473833c4 ar71xx: configure address aging on ar7240
SVN-Revision: 27704
2011-07-20 14:39:42 +00:00
Felix Fietkau fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x
SVN-Revision: 27703
2011-07-20 12:04:34 +00:00
Felix Fietkau 005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset
SVN-Revision: 27702
2011-07-20 12:04:29 +00:00
Felix Fietkau e7ab000008 ar71xx: increase the delay after the ethernet MAC reset
SVN-Revision: 27701
2011-07-20 12:04:25 +00:00
Felix Fietkau 255dcaa3a6 ar71xx: fix an unused variable warning
SVN-Revision: 27700
2011-07-20 12:04:20 +00:00
John Crispin 8acc276692 sync default kernel config for lantiq danube/ar9
SVN-Revision: 27697
2011-07-19 18:08:09 +00:00
John Crispin 500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE
SVN-Revision: 27696
2011-07-19 18:06:52 +00:00
John Crispin 78a9b1a2ad fixes pci on lantiq AR9 SoC
SVN-Revision: 27695
2011-07-19 18:06:42 +00:00
John Crispin 3833b7be24 add support for more lantiq AR9 boards
SVN-Revision: 27694
2011-07-19 18:06:33 +00:00
Felix Fietkau fee32761f3 kernel: backport and enable tmpfs xattr support for 2.6.39
SVN-Revision: 27691
2011-07-19 09:00:55 +00:00
John Crispin 6b8c119b41 * fix external interrupts
SVN-Revision: 27687
2011-07-18 16:27:11 +00:00
John Crispin 5906377332 * add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
2011-07-17 19:27:44 +00:00
Florian Fainelli 3994a2d1f9 add additionnal debug symbols when kernel debugging is enabled
SVN-Revision: 27637
2011-07-17 12:30:04 +00:00
Florian Fainelli 9c7294f7c7 add ehci support to DWV-S0 board (#9059)
SVN-Revision: 27622
2011-07-16 08:39:04 +00:00
Florian Fainelli 930485561c fix GEN_SPI_RSET_BASE macro (#9697)
SVN-Revision: 27604
2011-07-13 09:33:11 +00:00
Imre Kaloz ab5fd3c1cb upgrade to 3.0-rc7
SVN-Revision: 27600
2011-07-12 13:44:16 +00:00
Imre Kaloz 0321740a62 upgrade to 3.0-rc6 and optimize for armv5te again
SVN-Revision: 27592
2011-07-11 20:35:16 +00:00
Felix Fietkau f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
SVN-Revision: 27568
2011-07-09 06:30:13 +00:00
Felix Fietkau 2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
SVN-Revision: 27567
2011-07-09 06:29:46 +00:00
Imre Kaloz 8788b97e65 use the new upstream l2cache and wdt code, smaller changes, refresh patches
SVN-Revision: 27558
2011-07-08 09:41:07 +00:00
Imre Kaloz b3b0f0e49a add mpcore_wdt fixes
SVN-Revision: 27557
2011-07-08 09:33:13 +00:00
John Crispin 7f548d379f fix generation of falcon images for profiles
SVN-Revision: 27550
2011-07-07 20:20:51 +00:00
John Crispin d7732885ed adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
2011-07-07 20:20:46 +00:00
John Crispin b75a8fb532 fix up falcon kernel config
SVN-Revision: 27542
2011-07-07 18:20:56 +00:00
John Crispin 036df9f088 fix i2c-falcon kmod package selection
SVN-Revision: 27541
2011-07-07 18:20:51 +00:00
John Crispin a463daa818 replace all references to xway with danube
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
John Crispin dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube
SVN-Revision: 27537
2011-07-07 18:20:31 +00:00
John Crispin 3c1079a7a7 add ar9 specific profile
SVN-Revision: 27536
2011-07-07 18:20:27 +00:00
John Crispin 09d547eae4 rename xway profile to danube and remove ar9 specifics
SVN-Revision: 27535
2011-07-07 18:20:21 +00:00
John Crispin f177052c9d remove ar9 board from xway profiles
SVN-Revision: 27534
2011-07-07 18:20:16 +00:00
John Crispin dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
SVN-Revision: 27532
2011-07-07 18:20:07 +00:00
Imre Kaloz 79fa6c693a refresh patches
SVN-Revision: 27528
2011-07-07 17:18:50 +00:00
Imre Kaloz b8227050fb refresh patches
SVN-Revision: 27527
2011-07-07 17:18:06 +00:00
Imre Kaloz 92981b6bb3 enable smp support
SVN-Revision: 27526
2011-07-07 17:17:44 +00:00
Imre Kaloz 94055a90a7 make smp code more similar to upstream
SVN-Revision: 27525
2011-07-07 17:17:06 +00:00
Imre Kaloz 42df203852 3.0 is at rc6 now
SVN-Revision: 27524
2011-07-07 13:30:41 +00:00
Gabor Juhos 5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash
SVN-Revision: 27523
2011-07-07 13:01:50 +00:00
Gabor Juhos cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards
SVN-Revision: 27522
2011-07-07 13:01:48 +00:00
Imre Kaloz b15f8f765a add support for and switch to XZ compressed kernels on ARM
SVN-Revision: 27518
2011-07-07 10:26:16 +00:00
Imre Kaloz d148dcce05 select the right cpu
SVN-Revision: 27517
2011-07-07 10:24:37 +00:00
Florian Fainelli a3e343b722 fix building of perf for arm on uclibc
SVN-Revision: 27514
2011-07-07 09:43:00 +00:00
Florian Fainelli a4d69536ea enable support for perf events
SVN-Revision: 27512
2011-07-07 09:42:53 +00:00
Florian Fainelli 0cb42cf9a4 enable perf counter support
SVN-Revision: 27511
2011-07-07 09:42:50 +00:00
Daniel Dickinson 0d8b0e937d base-files: diag.sh: added failsafe led definition
SVN-Revision: 27502
2011-07-07 03:09:20 +00:00
John Crispin a674aabe54 get ready for 3.0
SVN-Revision: 27496
2011-07-06 17:27:17 +00:00
Gabor Juhos abb1ca01a7 ramips: fix buffalo image generation
SVN-Revision: 27495
2011-07-06 16:46:33 +00:00
Imre Kaloz a832965eff add 3.0 support
SVN-Revision: 27493
2011-07-06 13:03:38 +00:00
Imre Kaloz a00596924b refresh patches
SVN-Revision: 27492
2011-07-06 12:57:51 +00:00
Imre Kaloz 90bd74dd8b fixup mtd refresh and co.
SVN-Revision: 27491
2011-07-06 12:55:21 +00:00
Imre Kaloz f24764a372 fix myloader patch, thanks KanjiMonster
SVN-Revision: 27490
2011-07-06 12:48:17 +00:00
John Crispin d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
SVN-Revision: 27489
2011-07-06 10:36:56 +00:00
Imre Kaloz c93b5653bc we have an up-to-date mach-type file now
SVN-Revision: 27486
2011-07-06 10:12:50 +00:00
Imre Kaloz 05790d9cba replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff
SVN-Revision: 27485
2011-07-06 10:09:15 +00:00
Florian Fainelli 00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block
SVN-Revision: 27484
2011-07-06 10:00:39 +00:00
Florian Fainelli 965567a320 refresh 2.6.39 geode patches
SVN-Revision: 27483
2011-07-06 10:00:05 +00:00
Gabor Juhos 1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.

SVN-Revision: 27478
2011-07-06 08:05:00 +00:00
Gabor Juhos d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board
SVN-Revision: 27477
2011-07-06 08:04:55 +00:00