e7b6721f4e
update to 2.6.39.1
...
SVN-Revision: 27114
2011-06-04 18:27:14 +00:00
d97f50b69b
define UIMAGE for various rootfs targets
...
SVN-Revision: 27113
2011-06-04 18:27:09 +00:00
429745edd6
use IMG_PREFIX for image name
...
SVN-Revision: 27112
2011-06-04 18:27:04 +00:00
4aaf590909
add more config symbols to 2.6.39
...
SVN-Revision: 27111
2011-06-04 18:27:00 +00:00
89dd8aed1f
update to 2.6.39.1
...
SVN-Revision: 27110
2011-06-04 18:26:54 +00:00
72996d2dcb
update to 2.6.39.1
...
SVN-Revision: 27107
2011-06-04 13:36:09 +00:00
20c0427132
update to 2.6.39.1
...
SVN-Revision: 27106
2011-06-04 13:36:05 +00:00
de2e05b6f2
add some missing 2.6.39 config symbols
...
SVN-Revision: 27105
2011-06-04 13:36:00 +00:00
763b58c30c
update to 2.6.39.1
...
patch from Peter Wagner
SVN-Revision: 27104
2011-06-04 13:35:55 +00:00
13363d9129
ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27102
2011-06-04 12:30:10 +00:00
ae2cbfa1e8
ar71xx: select the internal antenna by default on the ZCN-1523H boards
...
SVN-Revision: 27101
2011-06-04 12:30:09 +00:00
0de25d1263
update to 2.6.39
...
SVN-Revision: 27090
2011-06-02 13:45:20 +00:00
31dd60689e
Revert "ar71xx: only enable the rx engine after the link is up..."
...
It messes up the DMA state when the link goes down
SVN-Revision: 27088
2011-06-01 18:15:43 +00:00
750af1522b
ar71xx: init external_reset for AR933X
...
SVN-Revision: 27083
2011-06-01 13:12:30 +00:00
af4cae4498
ar71xx: add external_reset field to ath9k_platform_data
...
SVN-Revision: 27082
2011-06-01 13:12:28 +00:00
f0c7b93e5d
ar71xx: init get_mac_revision on AR9330 rev 1
...
SVN-Revision: 27081
2011-06-01 13:12:27 +00:00
1a54e33c17
ar71xx: add get_mac_revision to ath9k_platform_data
...
SVN-Revision: 27080
2011-06-01 13:12:26 +00:00
34ff32a6eb
ar71xx: export SoC revision
...
SVN-Revision: 27079
2011-06-01 13:12:24 +00:00
2440175978
refresh patches
...
SVN-Revision: 27078
2011-06-01 07:24:41 +00:00
aafa838d77
fixup second led, patch from Chris
...
SVN-Revision: 27077
2011-06-01 07:21:25 +00:00
86dbc3a02d
ar71xx: add profile and image building code for wzr-hp-ag300h
...
SVN-Revision: 27076
2011-06-01 02:23:30 +00:00
4f06b8263a
ar71xx: add kernel support for the buffalo wzr-hp-ag300h
...
SVN-Revision: 27075
2011-06-01 02:23:26 +00:00
56dd5c4388
fix a crash in mtd_concat when the .sync op is not implemented
...
SVN-Revision: 27074
2011-06-01 02:23:22 +00:00
628cb35179
m25p80: add the chip id for the winbond w25q128 chip
...
SVN-Revision: 27073
2011-06-01 02:23:18 +00:00
acbb2db5e2
fixup pcie clock, thanks Chris
...
SVN-Revision: 27072
2011-05-31 23:55:33 +00:00
33fdc21d40
ar71xx: build images for the AP121 boards
...
SVN-Revision: 27070
2011-05-31 22:53:47 +00:00
9e435c03e0
ar71xx: add sysupgrade support for the AP121 boards
...
SVN-Revision: 27069
2011-05-31 22:53:45 +00:00
646937135f
ar71xx: add default network config for the AP121 boards
...
SVN-Revision: 27068
2011-05-31 22:53:44 +00:00
f332dbd7be
ar71xx: add support for the AP121/AP121-MINI reference boards
...
SVN-Revision: 27067
2011-05-31 22:53:43 +00:00
8beff081eb
ar71xx: register UART for the AR933X SoCs
...
SVN-Revision: 27066
2011-05-31 22:53:42 +00:00
b460bc6f12
ar71xx: add serial driver for the AR933X UART
...
SVN-Revision: 27065
2011-05-31 22:53:40 +00:00
c34e0cbc4c
ar71xx: add WMAC initialization code for the AR933X SoCs
...
SVN-Revision: 27064
2011-05-31 22:53:39 +00:00
e8a0aaf9a2
ar71xx: add ethernet initialization for the AR933X SoCs
...
SVN-Revision: 27063
2011-05-31 22:53:37 +00:00
e0a0f3796a
ar71xx: enable USB support for the AR933x SoCs
...
SVN-Revision: 27062
2011-05-31 22:53:36 +00:00
677c80ee17
ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
...
SVN-Revision: 27061
2011-05-31 22:53:35 +00:00
88c45e3130
ar71xx: the watchdog uses the reference clock on the AR933x SoCs
...
SVN-Revision: 27060
2011-05-31 22:53:34 +00:00
7acbacab8c
ar71xx: add AR933x specific glue code for IRQ initialization
...
SVN-Revision: 27059
2011-05-31 22:53:32 +00:00
e6fde61bec
ar71xx: don't register 8250 UART on the AR933x SoCs
...
SVN-Revision: 27058
2011-05-31 22:53:31 +00:00
8f7541a044
ar71xx: enable GPIO support for the AR933x SoCs
...
SVN-Revision: 27057
2011-05-31 22:53:30 +00:00
e11b9c8371
ar71xx: add AR933x specific frequency initialization code
...
SVN-Revision: 27056
2011-05-31 22:53:29 +00:00
0bf4478d37
ar71xx: add AR933x specific early_printk support
...
SVN-Revision: 27055
2011-05-31 22:53:27 +00:00
6b3ca9ef0b
ar71xx: add preliminary support for the Atheros AR933x SoCs
...
SVN-Revision: 27054
2011-05-31 22:53:26 +00:00
761e67b394
ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
...
NETGEAR doesnt produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.
This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.
There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 27053
2011-05-31 22:53:25 +00:00
c8d182406d
ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
...
SVN-Revision: 27051
2011-05-31 22:53:22 +00:00
0677e16248
ar71xx: Fix header offset for newer WRT160NL models
...
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27049
2011-05-31 22:53:20 +00:00
be97e2a043
ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
...
SVN-Revision: 27048
2011-05-31 22:53:19 +00:00
ea2f6d0edf
ar71xx: reduce the size of the squashfs-4k binaries
...
SVN-Revision: 27047
2011-05-31 22:53:18 +00:00
5d5f72415e
ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
...
SVN-Revision: 27045
2011-05-31 22:53:15 +00:00
f7b3c3dfd1
ar71xx: sync ath9k_platform_data.h with compat-wireless
...
SVN-Revision: 27044
2011-05-31 22:53:14 +00:00
650c7cc2fd
ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
...
SVN-Revision: 27043
2011-05-31 22:53:13 +00:00
4834fdaccd
ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
...
SVN-Revision: 27042
2011-05-31 22:53:12 +00:00
60d5abbc27
ar71xx: ag71xx: make ring sizes configurable via ethtool
...
SVN-Revision: 27041
2011-05-31 22:53:10 +00:00
7a2651f633
ar71xx: ag71xx: prepare to make ring sizes configurable
...
SVN-Revision: 27040
2011-05-31 22:53:09 +00:00
669aba3871
ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
...
Reported-by: Dave Täht <dave.taht@gmail.com>
SVN-Revision: 27039
2011-05-31 22:53:07 +00:00
9567b93e5c
x86: add additional companion chip drivers to alix2 and geos
...
Add the MFGPT high precision timers, and integration into the schedule (clock events).
Use OHCI, not UHCI usb module.
Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27038
2011-05-31 16:57:05 +00:00
68af223efe
x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
...
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27037
2011-05-31 16:57:01 +00:00
ba5b3ece5d
purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them
...
SVN-Revision: 27036
2011-05-31 09:47:30 +00:00
2b5402d128
ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo)
...
SVN-Revision: 27035
2011-05-30 23:08:01 +00:00
0ebc93831f
ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames
...
SVN-Revision: 27034
2011-05-30 23:07:57 +00:00
f738ca7b9c
upgrade to 2.6.39
...
SVN-Revision: 27030
2011-05-30 13:55:34 +00:00
6608f419d1
* backport 2.6.8 patches to .39 / .32.33
...
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support
SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
2011-05-27 09:54:52 +00:00
590c82cec1
bcm63xx: Add support for 2.6.38
...
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27018
2011-05-27 09:54:48 +00:00
68cb138154
fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
SVN-Revision: 27014
2011-05-26 13:53:00 +00:00
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
2011-05-26 13:52:56 +00:00
2785e3fc12
renumber board patches
...
SVN-Revision: 27012
2011-05-26 12:09:15 +00:00
6f7ae75ffa
kernel: exportfs: reallow building as a module
...
It was originally tristate, but was changed to bool to prevent a build
breakage in an earlier patch revision (for a new syscall). The actual
commit[1] changed it in a way this isn't needed anymore, but
accidentially left the EXPORTFS change in. There's no reason for it
not being buildable as a module, so changing it back to tristate is
fine.
see: https://patchwork.kernel.org/patch/812832/
Thank you Jonas Gorski for the patch.
SVN-Revision: 27011
2011-05-25 20:57:13 +00:00
6769216a64
kernel: generic: Update 2.6.39 to final
...
* Add missing config symbols
* Update package/kernel for 2.6.39
CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.
Thank you Jonas Gorski for the patch
SVN-Revision: 27010
2011-05-25 19:51:40 +00:00
c69f2d8788
kernel: some updates for kernel 2.6.39
...
* add md5sum for kernel
* add some missing config symbols
* add some ssb patches to make compat-wireless compile
Thank you Peter Wagner for the patch
SVN-Revision: 27009
2011-05-25 19:32:00 +00:00
8137e35a5d
brcm47xx: initial 2.6.39 support for brcm47xx
...
Thank you Peter Wagner for the patch
SVN-Revision: 27008
2011-05-25 19:27:08 +00:00
fad3f46f0d
fix mtd warnings
...
Fixes for the following warnings:
drivers/mtd/devices/block2mtd.c: In function '_open_bdev':
drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code
drivers/mtd/devices/block2mtd.c: In function 'add_device':
drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type
In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27007
2011-05-25 19:16:58 +00:00
f5f989e3fb
brcm47xx: remove old kernel
...
SVN-Revision: 27006
2011-05-25 18:05:54 +00:00
06166b01dd
brcm47xx: fix partition layout on SimpleShare devices.
...
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.
This fixes #9323
Thank you Will Holmes for the patch.
SVN-Revision: 27005
2011-05-25 17:46:34 +00:00
50d2a84a21
Clean up patch not applying
...
SVN-Revision: 26997
2011-05-24 10:00:36 +00:00
16dfe8b4d1
add support for BT Voyager 2110 ( #8810 )
...
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
2011-05-20 10:06:25 +00:00
6c8387fe15
add support for DSL-2640B rev B2
...
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
031ea08ef0
refresh patches
...
SVN-Revision: 26957
2011-05-20 10:06:18 +00:00
3e83f60a66
add support for D-Link DVA-G3810BN/TL
...
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
2011-05-20 10:06:15 +00:00
f9f8dcfa70
refresh 2.6.37 patches
...
SVN-Revision: 26955
2011-05-20 10:06:11 +00:00
f0a99c1692
add support for BT Voyager 2500 ( #9070 )
...
SVN-Revision: 26954
2011-05-20 10:06:07 +00:00
acf0ec224f
add support for USR9108 LEDs ( #9372 )
...
SVN-Revision: 26953
2011-05-20 10:06:04 +00:00
58b5a2ca7b
add GT701 LEDs support ( #9382 )
...
SVN-Revision: 26952
2011-05-20 10:06:00 +00:00
f2c86a3835
Simple typo for kmod- prefix in alix2 target makefile.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26945
2011-05-19 04:29:40 +00:00
54415a28d6
Remove override of max80211.sh
...
SVN-Revision: 26936
2011-05-18 12:43:54 +00:00
e7dfadd012
Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh
...
SVN-Revision: 26932
2011-05-18 11:50:36 +00:00
17e257925f
ar71xx: don't probe the LAN PHY
...
SVN-Revision: 26924
2011-05-17 11:15:24 +00:00
4deecea26b
ar71xx: detect link on LAN ports
...
SVN-Revision: 26922
2011-05-17 11:12:56 +00:00
dfc19a34b4
* adds support for Artec Thincan
...
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
SVN-Revision: 26919
2011-05-17 10:35:14 +00:00
894d50da25
kernel: backport some ssb changes to support a mac80211 update
...
SVN-Revision: 26911
2011-05-16 21:50:20 +00:00
d475545c91
remove an accidentally copied comment from the option.ko device patch
...
SVN-Revision: 26908
2011-05-15 21:28:12 +00:00
43e002fe5e
add definitions for Alcatel X220D and Huawai E173s to option.ko ( #9422 )
...
SVN-Revision: 26906
2011-05-15 19:17:31 +00:00
a4c0645326
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
...
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.
SVN-Revision: 26905
2011-05-15 17:23:02 +00:00
2ea528d1d0
ar71xx: add link detection on Ubiquiti devices WAN port
...
SVN-Revision: 26891
2011-05-14 23:31:50 +00:00
c0c2e18452
use correct macros and frame size in ag71xx
...
SVN-Revision: 26890
2011-05-14 23:10:06 +00:00
99d1d4f795
ar71xx: cosmetic fixes
...
SVN-Revision: 26889
2011-05-14 23:08:00 +00:00
d6e96fd7d8
Add new defconfig and profile for es variant
...
SVN-Revision: 26884
2011-05-13 11:49:52 +00:00
abd4a7df35
Squash uids
...
SVN-Revision: 26883
2011-05-13 10:36:39 +00:00
09e0d10010
Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
...
SVN-Revision: 26882
2011-05-13 07:23:11 +00:00
8d66bf7e72
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26880
2011-05-13 06:08:49 +00:00
937362f270
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26879
2011-05-13 06:06:42 +00:00
9c8a2d5961
bcm63xx: Add support for the T-Home Speedport W 303V
...
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
7d3b735854
bcm63xx: Update support for the DSL-274xB revision C
...
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
0fb1c2d537
bcm63xx: Accept any led with power in its name as power led
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
2011-05-11 13:33:45 +00:00
c6af9c23b7
bcm63xx: Decouple Board ID and image name for fixup
...
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
2011-05-11 13:33:41 +00:00
4ea316216a
switch to 2.6.38
...
SVN-Revision: 26873
2011-05-11 13:33:34 +00:00
3fc33726a5
add missing 2.6.38 touchscreen config symbols
...
SVN-Revision: 26872
2011-05-11 13:33:30 +00:00
60c125b8e6
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
...
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865
2011-05-09 15:21:58 +00:00
9b5036a29d
ar71xx: populate LED3 on the JA76PF board
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
SVN-Revision: 26862
2011-05-08 21:38:51 +00:00
b39eebdf1e
ar71xx: add uci config for the WLAN LED on the WRT160NL
...
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
SVN-Revision: 26861
2011-05-08 21:38:49 +00:00
858e2e719b
ar71xx: use phy0tpt trigger for the WLAN LEDs
...
SVN-Revision: 26860
2011-05-08 21:38:48 +00:00
869f3cb718
ar71xx: remove superfluous fifo_cfg overrides
...
SVN-Revision: 26859
2011-05-08 21:38:46 +00:00
bc121d5706
ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht
...
SVN-Revision: 26858
2011-05-08 17:08:06 +00:00
5d77f370d6
ar71xx: ag71xx: make switch register access atomic
...
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.
This is easily noticable during an iperf session:
...
[ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec
[ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec
...
[ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec
[ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec
[ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec
SVN-Revision: 26856
2011-05-08 16:32:53 +00:00
3711658281
ar71xx: ag71xx: fix section mismatch warnings
...
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.
The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.
SVN-Revision: 26855
2011-05-08 13:30:36 +00:00
ef53029870
ar71xx: ag71xx: fix build error if debugfs is enabled
...
SVN-Revision: 26854
2011-05-08 13:30:26 +00:00
732abc44cc
brcm47xx: update patches
...
SVN-Revision: 26846
2011-05-07 12:49:17 +00:00
8b67d748cb
ar71xx: ag71xx: add debugfs entry for [rt]x_ring
...
SVN-Revision: 26845
2011-05-07 12:40:34 +00:00
2166432ba0
ar71xx: ag71xx: add timestamps to ag71xx_buf
...
SVN-Revision: 26844
2011-05-07 12:40:28 +00:00
896e1d1ab4
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
...
SVN-Revision: 26843
2011-05-07 12:40:26 +00:00
a6708d20d1
ar71xx: ag71xx: use debugfs_remove_recursive
...
SVN-Revision: 26842
2011-05-07 12:40:25 +00:00
c39e5b9360
ar71xx: override wmac device name for the AR934x SoCs
...
SVN-Revision: 26840
2011-05-07 09:23:32 +00:00
fbbe154a48
remove useless patches
...
SVN-Revision: 26837
2011-05-06 12:37:40 +00:00
de02a2795b
fill maintainer infos for a couple of targets
...
SVN-Revision: 26836
2011-05-06 12:37:36 +00:00
1adaa8790d
update to 2.6.38.2
...
SVN-Revision: 26833
2011-05-05 16:35:44 +00:00
fd33dffe60
add missing 2.6.38 symbols
...
SVN-Revision: 26832
2011-05-05 16:35:40 +00:00
fcb1557a3e
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
54fb8868fa
brcm47xx: fix typo in patch
...
SVN-Revision: 26828
2011-05-05 13:18:35 +00:00
7fb06ce6cd
linux/ar71xx: add some missing symbols for nand/yaffs targets
...
SVN-Revision: 26827
2011-05-05 07:19:46 +00:00
c27ffb1912
linux/generic: port yaffs to 2.6.39
...
SVN-Revision: 26818
2011-05-04 09:35:06 +00:00
67339c1329
linux/rb532: use kernel and initramfs tags on image generation
...
SVN-Revision: 26817
2011-05-04 08:47:00 +00:00
ae5435adc9
geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform.
...
SVN-Revision: 26811
2011-05-03 21:18:12 +00:00
a18ec3c37e
update to 2.6.38
...
SVN-Revision: 26803
2011-05-02 07:57:25 +00:00
af53fa1d91
cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver
...
SVN-Revision: 26802
2011-05-02 00:28:30 +00:00
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
f9a92812cf
cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k
...
SVN-Revision: 26797
2011-05-01 15:53:56 +00:00
cbc75a9c70
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
...
SVN-Revision: 26779
2011-04-28 21:27:42 +00:00
eb270c4d33
ar8316: automatically detect whether port4 is used as PHY or as a switch port
...
SVN-Revision: 26778
2011-04-28 21:27:37 +00:00
36aecb08b8
ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)
...
SVN-Revision: 26777
2011-04-28 19:30:49 +00:00
2336d4b438
ar8216: support AR8316 rev 0 devices
...
SVN-Revision: 26776
2011-04-28 19:30:43 +00:00
8b7a516fa8
linux/atheros: add 2.6.38 preliminary support
...
SVN-Revision: 26772
2011-04-27 17:18:03 +00:00
9e8cd78944
swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK
...
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26770
2011-04-26 23:05:29 +00:00
edfcbe5705
linux/adm5120: update wget2nand script
...
SVN-Revision: 26748
2011-04-21 13:18:33 +00:00
f13581eedb
linux/ar71xx: update wget2nand script
...
SVN-Revision: 26747
2011-04-21 12:38:25 +00:00
015b010f90
linux/ar71xx: add 2.6.38 preliminary support
...
SVN-Revision: 26746
2011-04-21 11:45:23 +00:00
a2687e8d6d
uml: fix the kernel config name override
...
SVN-Revision: 26715
2011-04-17 21:47:49 +00:00
ae51f1972f
x86: remove 2.6.35 patches
...
SVN-Revision: 26710
2011-04-17 18:39:50 +00:00
1fcd26091b
brcm63xx: remove patches/configs for 2.6.35
...
SVN-Revision: 26709
2011-04-17 18:39:46 +00:00
8566daa5df
au1000: remove patches/configs for 2.6.35
...
SVN-Revision: 26708
2011-04-17 18:39:42 +00:00
f5d3d0e7d8
ar7: remove patches/configs for old kernel versions
...
SVN-Revision: 26707
2011-04-17 18:39:38 +00:00
64f67b9c2a
adm5120: remove patches/configs for unused kernel versions
...
SVN-Revision: 26706
2011-04-17 18:39:32 +00:00
ede6b0d360
rootfs_split: Allow using MTDPART_OFS_APPEND macro for offset of rootfs.
...
Use offset from struct mtd_part instead of struct mtd_partition for defining
the new partitions. This enables the usage of MTDPART_OFS_APPEND macro in
struct mtd_partition.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
SVN-Revision: 26705
2011-04-17 18:32:28 +00:00
5a0df036b0
Remove 2.6.35. It's not used anymore.
...
Signed-off-by: Jochen Friedrich <jochen@scram.de>
SVN-Revision: 26704
2011-04-17 18:32:21 +00:00
8b18ce6807
Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
...
SVN-Revision: 26699
2011-04-17 01:15:47 +00:00
dcffeb99e2
ixp4xx: backport an upstream commit to fix gspca compile errors triggered by the buildbot
...
SVN-Revision: 26698
2011-04-16 21:30:48 +00:00
f385231730
fix a typo in the kernel patch description
...
SVN-Revision: 26693
2011-04-16 18:40:23 +00:00
a1624421ae
kernel: reorganize 2.6.37 patches
...
SVN-Revision: 26692
2011-04-16 18:31:21 +00:00
3fa43f54a2
kernel: reorganize 2.6.39 patches
...
SVN-Revision: 26691
2011-04-16 18:31:05 +00:00
71d8c66250
kernel: reorganize 2.6.38 patches, clean up block2mtd patches
...
SVN-Revision: 26690
2011-04-16 18:30:57 +00:00
4a6e01fa38
kernel: add a PATCHES text file describing the new patch categories
...
SVN-Revision: 26689
2011-04-16 18:30:51 +00:00
2066c21c92
kernel: backport the fix "net_sched: fix ip_tos2prio" for 2.6.37 Fixes a bug that led to ECN enabled flows being de-prioritized by pfifo_fast
...
SVN-Revision: 26687
2011-04-16 01:46:57 +00:00
0d722113b9
Generate images for RTA1320_16M-based routers
...
SVN-Revision: 26681
2011-04-15 14:31:36 +00:00
f83c5938d2
bcm63xx: Move the OpenWrt rootfs length field
...
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26680
2011-04-15 12:18:25 +00:00
ff1bc5c29d
x86: missing kernel symbols
...
Please include these two missing kernel CONFIG_ symbols.
SVN-Revision: 26679
2011-04-15 04:56:49 +00:00
4021469e4a
geos: Add PC speaker to kernel definitions
...
Add the PC speaker back to the Geos platform.
Add DMI support in BIOS.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26678
2011-04-15 04:51:05 +00:00
e6350dee82
adm5120: fix promiscuous mode handling (patch from #8581 )
...
SVN-Revision: 26673
2011-04-15 00:20:59 +00:00
cddc775ee8
ar71xx: enable the ip17xx PHY driver ( fixes #5193 , #8027 )
...
SVN-Revision: 26670
2011-04-14 23:51:12 +00:00
05e533ba4d
linux/adm5120: generate non-initramfs kernel images too
...
SVN-Revision: 26657
2011-04-14 09:59:13 +00:00
da323cc470
linux/adm5120: preliminary 2.6.38 config options
...
SVN-Revision: 26648
2011-04-13 16:47:26 +00:00
54d4dc56c5
linux/adm5120: add 2.6.38 preliminary support
...
SVN-Revision: 26647
2011-04-13 16:42:03 +00:00
92bd56fea1
ar71xx: replace the madwifi profile with an ath5k profile
...
SVN-Revision: 26626
2011-04-12 21:10:45 +00:00
76bfcee5ea
gzip jffs2 images Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
...
SVN-Revision: 26625
2011-04-12 20:48:47 +00:00
d1f053d7ef
Enable padding of jffs2 images to user specified filesystem size Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
...
SVN-Revision: 26624
2011-04-12 20:46:34 +00:00
0959467583
solos: various upstreamed solos patches
...
These patches were submitted to netdev and will likely be out in 2.6.38.3.
In the meantime, they're needed in 2.6.37.6.
Patch by Philip Prindeville
SVN-Revision: 26616
2011-04-12 19:50:15 +00:00
127e4ebd32
generic: Add support for 2.6.39
...
Add support for 2.6.39 based on rc3. Runtime tested on bcm63xx.
SVN-Revision: 26615
2011-04-12 19:39:20 +00:00
f4f4ace363
Change partition table layout
...
SVN-Revision: 26607
2011-04-12 14:16:32 +00:00
fa9f45f345
ar71xx: fix build error w/o CONFIG_PCI
...
SVN-Revision: 26606
2011-04-12 13:14:56 +00:00
adb6217471
ar71xx: don't hardcode console parameters in kernel config
...
SVN-Revision: 26605
2011-04-12 13:14:53 +00:00
e193547733
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
...
SVN-Revision: 26603
2011-04-12 09:29:21 +00:00
54ede24829
ar71xx: Add support for WZR-HP-G301NH
...
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.
While we are at it, also rename the profile to reflect that it now is for
more than one device.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26601
2011-04-12 09:29:10 +00:00
f358166236
generic: rtl8366{s,rb}: remove the PHY driver.
...
Since the PHY driver is only used for the WAN port and there is virtually
no difference between it and the generic PHY driver, we can sefely remove
it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26600
2011-04-12 09:29:07 +00:00
e28b459b21
generic: add support for the MX25L1606E SPI flash
...
SVN-Revision: 26596
2011-04-11 17:37:13 +00:00
ef4c1d49a6
ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac
...
SVN-Revision: 26595
2011-04-11 17:37:08 +00:00
4711dea8ff
ar71xx: fix AR934X_WMAC_SIZE
...
SVN-Revision: 26594
2011-04-11 17:37:03 +00:00
22285a76e5
atheros: use ath5k instead of madwifi
...
SVN-Revision: 26588
2011-04-11 03:26:58 +00:00
4697a30c05
atheros: remove bogus wlan device mask checks
...
SVN-Revision: 26585
2011-04-11 03:25:59 +00:00
247a688ca5
drop 005-au1000_phy_addr.patch, upstream is fixed
...
SVN-Revision: 26580
2011-04-10 18:25:56 +00:00
aed622fd2c
amazon: Upgrade amazon target to kernel 2.6.37
...
This was just a little bit tested on an SAMSUNG SMT-G3020 and pci and usb do not work like before.
SVN-Revision: 26576
2011-04-10 15:08:28 +00:00
74a5c8148a
at91: add some missing config options
...
SVN-Revision: 26571
2011-04-09 23:36:26 +00:00
2ce13f05cb
kernel: add symbols, small fixes
...
* Some module should be loaded later to load them after the modules they are depending on
* add some more missing config symbols
* make CS5535 build again
SVN-Revision: 26570
2011-04-09 23:34:20 +00:00
8586e61b00
ar71xx: fix section mismatch
...
SVN-Revision: 26562
2011-04-09 18:47:55 +00:00
a8bf5e3cdb
ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq
...
Also initialize that for each SoC and print its value along with the
other frequencies.
SVN-Revision: 26561
2011-04-09 18:47:52 +00:00
5573d6eb28
ar71xx: show the SoC type earlier
...
SVN-Revision: 26560
2011-04-09 18:47:50 +00:00
ab4c3b3a1c
ar71xx: cleanup SoC detection code
...
SVN-Revision: 26559
2011-04-09 18:47:49 +00:00
694d9059c9
ar71xx: sync kernel configuration
...
SVN-Revision: 26558
2011-04-09 18:47:45 +00:00
3310c70702
ar71xx: Fix mac address offset for AR934x
...
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
SVN-Revision: 26557
2011-04-09 18:47:42 +00:00
7486cf730a
atheros: merge a few patches into the right place
...
SVN-Revision: 26556
2011-04-09 18:26:03 +00:00
63c08f0f0b
atheros: fix up empty radio data mac address (based on patch from #8601 )
...
SVN-Revision: 26555
2011-04-09 18:25:59 +00:00
4eb507901a
atheros: fix ath5k support on ar2315/2317
...
- Use physical addresses definition for AR2315 the same way as AR5312. Fixes ioremap
- Fix dma mapping for AHB bus (only use the PCI DMA offset for PCI devices)
Based on patches by Wojciech Dubowik
SVN-Revision: 26554
2011-04-09 18:25:55 +00:00
cf3adeaa22
atheros: enable CONFIG_IP17XX_PHY to add back switch support for the DIR-300
...
SVN-Revision: 26553
2011-04-09 18:25:51 +00:00
bba5f37bb8
kernel: add missing config options
...
SVN-Revision: 26552
2011-04-09 17:39:44 +00:00
Florian Fainelli
Gabor Juhos
Felix Fietkau
Imre Kaloz
Mirko Vogt
John Crispin
Hauke Mehrtens
Hamish Guthrie
Daniel Dickinson
Matteo Croce
Jo-Philipp Wich
Travis Kemen
Alexandros C. Couloumbis