hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
23,571 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

10002 Commits (a987d1aaa318b3ace1f8aa2eb69666d0592c1120)

Author SHA1 Message Date
Gabor Juhos 393163b098 generic: ar8216: add defines for the AR8316 POSTRIP register 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35539
 2013-02-10 13:18:48 +00:00
Gabor Juhos 5ed480598d generic: ar8216: don't probe the chip multiple times 
It is only needed when the private data is allocated.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35538
 2013-02-10 13:05:15 +00:00
Gabor Juhos 774da6c7a4 generic: ar8216: add sanity check to ar8216_probe 
Verify that the mdio bus has PHY devices with
a supported PHY ID at address 0-4.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35537
 2013-02-10 13:05:14 +00:00
Gabor Juhos 4720c75cf7 generic: ar8216: skip probe on unused PHY addresses 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35536
 2013-02-10 13:05:12 +00:00
Jonas Gorski f07a33afc2 ar71xx: register the micro sd card reader on RB493G 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35535
 2013-02-10 12:31:38 +00:00
Jonas Gorski eedc3554fe generic: b53: fix reverted error check in probe 
b53_switch_detect returns value returned by b53_read8, which is 0 for
success. So fail (and return error) only if b53_switch_detect returned
something else than 0. This fixes supported and advertising being zeros
for MDIO access.

Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35534
 2013-02-10 12:31:36 +00:00
Jonas Gorski 200359a520 bcm63xx: handle huawei nvram layout 
Use a different length for calculating the nvram checksum on hauwei
boards. Fixes boot on HW553 and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35533
 2013-02-10 12:31:31 +00:00
Gabor Juhos de123c4409 generic: ar8216: move sleep out of the loop 
It is enough to sleep once after ANEG is enabled on
all PHYs. This reduces boot time on boards with
AR8316 switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35532
 2013-02-09 13:26:04 +00:00
Gabor Juhos 6ff973bdda ar71xx: Routerboard 751 Mac Address Offset Fix 
We utilize many Routerboard 751's and discovered that our latest batch
of RB751's would not initialize the wireless radio. We have determined
Mikrotik has changed where the mac address was located inside hardconfig.
As such we utilize "routerboot_find_tag" to find the location of the mac
address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous
by machine manufacturing date. The newer batch of RB751's that we received
had a RB751_MAC_ADDRESS_OFFSET 0x10.

Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35519
 2013-02-08 09:34:53 +00:00
Gabor Juhos aa04441904 generic: ar8216: simplify phy features setup 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35518
 2013-02-08 09:13:18 +00:00
Gabor Juhos 9c1f95a416 generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35517
 2013-02-08 09:13:14 +00:00
Gabor Juhos 5393efc0c7 generic: ar8216: use inline function to convert swdev to ar8216 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35514
 2013-02-07 15:18:36 +00:00
Gabor Juhos b87a1c757d generic: ar8216: add mii_bus field to struct ar8216_priv 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35513
 2013-02-07 15:18:35 +00:00
Gabor Juhos c130a3feac generic: mvswitch: add detach callback 
Use the detach callback to disable packet mangling
to avoid possible NULL pointer dereference.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35512
 2013-02-07 15:18:34 +00:00
Gabor Juhos 4be8c22e74 generic: ar8216: add detach callback 
The current code uses the 'remove' callback to disable
packet mangle on the underlying ethernet device.
However the attached_dev is always NULL when the
'remove' callback is called by phylib, and this causes
NULL pointer dereference, like this:

  [  475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac
  [  475.310000] Oops[#1]:
  [  475.310000] Cpu 0
  [  475.310000] $ 0   : 00000000 00000000 00000000 00000001
  [  475.310000] $ 4   : 828dde00 00000005 828dde08 ffffffff
  [  475.310000] $ 8   : 00380081 00380081 82902a40 00000001
  [  475.310000] $12   : 00000037 00370081 00000001 00000000
  [  475.310000] $16   : 82865000 828dde08 828dde00 00000001
  [  475.310000] $20   : 00000080 00460000 00000002 77151448
  [  475.310000] $24   : 00000000 801abfd4
  [  475.310000] $28   : 82cc2000 82cc3d58 0053c3c4 801c7eac
  [  475.310000] Hi    : 00000007
  [  475.310000] Lo    : 00000004
  [  475.310000] epc   : 801cdcf0 ar8216_remove+0x1c/0x94
  [  475.310000]     Tainted: G           O
  [  475.310000] ra    : 801c7eac phy_remove+0x4c/0x6c
  [  475.310000] Status: 1000cc03    KERNEL EXL IE
  [  475.310000] Cause : 00800008
  [  475.310000] BadVA : 000000f0
  [  475.310000] PrId  : 00019750 (MIPS 74Kc)
  [  475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft
  p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co
  nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu
  dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80
  211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  [  475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440)
  [  475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8
          82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94
          00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000
          83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000
          00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000
          ...
  [  475.310000] Call Trace:
  [  475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94
  [  475.310000] [<801c7eac>] phy_remove+0x4c/0x6c
  [  475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0
  [  475.310000] [<801ad7fc>] device_release_driver+0x28/0x40
  [  475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c
  [  475.310000] [<801aac44>] device_del+0x110/0x170
  [  475.310000] [<801aacb8>] device_unregister+0x14/0x28
  [  475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70
  [  475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx]
  [  475.310000]
  [  475.310000]
  Code: 1200001c  8c82017c  ac800128 <8c4500f0> 3c03ffdf  3463ffff 00a31824  ac4300f0  ac4000e0

Add a detach callback and disable packet mangling in
that to fix the problem.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35511
 2013-02-07 15:18:32 +00:00
Gabor Juhos fe61fc2d7d generic: add detach callback to struct phy_driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35510
 2013-02-07 15:18:24 +00:00
Hauke Mehrtens 07db9e8eab brcm47xx: fix name of kmod-ocf-ubsec-ssb 
This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb.

Thank you Manuel Munz <freifunk@somakoma.de> for the patch.

SVN-Revision: 35509
 2013-02-06 22:51:25 +00:00
Hauke Mehrtens a52832164b brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up 
This fixes #12927.

SVN-Revision: 35507
 2013-02-06 14:57:00 +00:00
Florian Fainelli 6b0da6db6a remove support for 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35506
 2013-02-05 22:36:54 +00:00
Florian Fainelli e22926a46b make default version 3.7.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35505
 2013-02-05 22:36:50 +00:00
Florian Fainelli 57803a98ec remove superfluous calls to /lib/brcm63xx.sh 
The first preinit script 03_do_brcm63xx.sh does the right job of
exporting variables for the other subsequent preinit scripts to use
them.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35504
 2013-02-05 22:25:30 +00:00
Florian Fainelli 84d306d23c remove references to the old switch driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35503
 2013-02-05 22:25:19 +00:00
Mirko Vogt ec19a23bae fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W 
SVN-Revision: 35501
 2013-02-05 14:57:43 +00:00
Mirko Vogt f460388ce2 add support for board named RTA770W 
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
 2013-02-05 14:57:40 +00:00
Gabor Juhos 395d0bdc1f generic: ar8216: clear driver specific data pointer in phy_device 
This is needed to avoid a NULL pointer dereference:

  [   19.525270] Unable to handle kernel paging request for data at address 0x00000018
  [   19.532750] Faulting instruction address: 0xc016e104
  [   19.537714] Oops: Kernel access of bad area, sig: 11 [#1]
  [   19.543102] P1010 RDB
  [   19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d
  [   19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000
  [   19.595681] REGS: c4bc3c10 TRAP: 0300   Tainted: G        W  O (3.7.6)
  [   19.602284] MSR: 00029000 <CE,EE,ME>  CR: 82002022  XER: 20000000
  [   19.608381] DEAR: 00000018, ESR: 00000000
  [   19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000
  GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec
  GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514
  GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914
  GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000
  [   19.646352] NIP [c016e104] register_switch+0x98/0x2d0
  [   19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.656697] Call Trace:
  [   19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable)
  [   19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c
  [   19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8
  [   19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68
  [   19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c
  [   19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8
  [   19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120
  [   19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c
  [   19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60
  [   19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690
  [   19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc
  [   19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294
  [   19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728
  [   19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70
  [   19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c
  [   19.748646] --- Exception: c01 at 0x48091b34
  [   19.748646]     LR = 0x480e4b64
  [   19.756033] Instruction dump:
  [   19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040
  [   19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35497
 2013-02-05 08:39:26 +00:00
Gabor Juhos 2e7f38c243 generic: ar8216: unregister switch on error path 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35496
 2013-02-05 08:39:24 +00:00
Gabor Juhos 1bb8ad6050 mpc85xx: enable GPIO sysfs interface 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35495
 2013-02-05 07:48:02 +00:00
Gabor Juhos 6ba265a573 mpc85xx: enable Freescale eSPI driver and m25p80 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35494
 2013-02-05 07:48:01 +00:00
Gabor Juhos eea43ffd33 mpc85xx: sync kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35493
 2013-02-05 07:47:59 +00:00
Hauke Mehrtens 8ba8225686 brcm47xx: fix detection of Asus RT-N16 
This fixes #12936.

SVN-Revision: 35492
 2013-02-04 22:49:05 +00:00
Hauke Mehrtens a1e3c0ca46 Add Failsafe support for Linksys E3000V1 / WRT610NV2 
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm.  The list of devices will need to
be expanded.  Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists?  Could
a similar method be used in "/etc/init.d/netconfig"?

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35491
 2013-02-04 22:40:57 +00:00
Hauke Mehrtens c2198aba32 brcm47xx: Fix switch config on 4716/53115 devices 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 35490
 2013-02-04 22:38:37 +00:00
Gabor Juhos b97aee1ee8 coldfire: R.I.P. 
The target still uses 2.6.38. The support of that
kernel version has been removed ~9 months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35489
 2013-02-04 15:23:10 +00:00
Gabor Juhos c41002971a leon: R.I.P. 
It is broken since ~9 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35488
 2013-02-04 15:23:08 +00:00
Gabor Juhos 539e0b5b84 imx21: R.I.P. 
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35487
 2013-02-04 15:23:07 +00:00
Gabor Juhos e7dee4ea87 octeon: R.I.P. 
It is broken since ~8 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35486
 2013-02-04 15:23:05 +00:00
Gabor Juhos da44b916cf omap35xx: R.I.P. 
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35485
 2013-02-04 15:23:04 +00:00
Jonas Gorski 8506964e6d bcm63xx: add support for linux 3.8 
Based on 3.8-rc6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35482
 2013-02-04 10:19:55 +00:00
Jonas Gorski 3b4fced67d bcm63xx: add support for linux 3.7 
Based on 3.7.6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35481
 2013-02-04 10:19:50 +00:00
Jonas Gorski 0e9365b346 kernel: generic: update the ehci overcurrent patch to upstream submission 
Adds support for setting this in the generic platform driver's platform_data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35480
 2013-02-04 10:19:37 +00:00
Jonas Gorski e0fe5596f8 kernel: generic: add back the patch exporting bcm63xx tag header 
It went missing when adding linux 3.7 support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35479
 2013-02-04 10:19:35 +00:00
Jonas Gorski 34ad8f4e75 kernel: generic: update to 3.8-rc6 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35478
 2013-02-04 10:19:28 +00:00
Jonas Gorski a15e1a950d bcm63xx: refresh 3.6 patches 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35477
 2013-02-04 10:19:24 +00:00
Gabor Juhos 08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos b1168e70d3 ar71xx: use backported PCI_MEM_SIZE patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35470
 2013-02-02 18:17:58 +00:00
Gabor Juhos b9b341f05a ar71xx: rename ar933x_uart patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35469
 2013-02-02 18:17:53 +00:00
Gabor Juhos 9ed81a91f3 ramips: build image for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35468
 2013-02-02 17:21:06 +00:00
Gabor Juhos 813aec6796 ramips: add user-space support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
 2013-02-02 17:21:05 +00:00
Gabor Juhos d578f3ac38 ramips: rt3883: add kernel support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35466
 2013-02-02 17:21:01 +00:00
Gabor Juhos b99b2ff553 ramips: add userspace support for the Edimax BR-6425 
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
 2013-02-02 17:01:50 +00:00
Gabor Juhos 0a42e38bad ramips: add kernel support for the Edimax BR-6425 board 
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
 2013-02-02 17:01:47 +00:00
Gabor Juhos 4ac6eb480b x86/kvm_guest: add support for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35460
 2013-02-02 15:31:57 +00:00
Gabor Juhos c340ef2ae2 x86: add missing symbols for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35459
 2013-02-02 15:31:55 +00:00
Gabor Juhos 0f46f47512 x86/kvm_guest: add missing symbols for 3.3 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35458
 2013-02-02 15:31:54 +00:00
Gabor Juhos ab3e3cacaa alix2: convert from kernel version 3.3.8 to 3.7.5 
[juhosg: use 3.7.5 instead of 3.7.3]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35457
 2013-02-02 15:31:52 +00:00
Gabor Juhos 4c223d7d4f generic: convert crypto-ocf from kernel_thread to kthread 
recent kernels have finally stopped exporting kernel_thread, since a
deprecation circa 2006.  This patch attempts to convert to the newer
kernel kthread API, particularly in random.c

[juhosg: remove randomproc variable, it is not required after the patch]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35456
 2013-02-02 15:31:44 +00:00
Gabor Juhos 7c87d28054 ar71xx: fixes whitespaces for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35455
 2013-02-02 15:02:19 +00:00
Gabor Juhos ecf55822bb mpc85xx: nuke 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35453
 2013-02-02 10:05:43 +00:00
Gabor Juhos 242859abae mpc85xx: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35452
 2013-02-02 10:05:40 +00:00
Gabor Juhos cde71c305c mpc85xx: add support for linux 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35451
 2013-02-02 10:05:37 +00:00
Gabor Juhos bbfd8cbf94 linux/3.7: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35450
 2013-02-02 10:05:08 +00:00
Gabor Juhos 9a438b2271 ar71xx: build images for the TP-LINK TL-WR743ND v2 
AR9331 based, these same as 741v4

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35449
 2013-02-02 10:01:15 +00:00
Gabor Juhos 668e529220 generic: fix gc_sections patch 
Due to the patch, essential '.data..*' sections are merged
into the '.data' section:

  --- vmlinux.good.sect   2013-02-01 23:49:16.000000000 +0100
  +++ vmlinux.bad.sect    2013-02-01 23:49:02.000000000 +0100
  @@ -1,5 +1,5 @@

  -vmlinux.good:     file format elf32-powerpc
  +vmlinux.bad:     file format elf32-powerpc

   Sections:
   Idx Name          Size      VMA       LMA       File off  Algn
  @@ -53,43 +53,35 @@
                     CONTENTS, ALLOC, LOAD, READONLY, DATA
    24 .machine.desc 00000460  c04e1000  004e1000  004f1000  2**2
                     CONTENTS, ALLOC, LOAD, DATA
  - 25 .data         0000f6a0  c04e2000  004e2000  004f2000  2**12
  + 25 .data         0001635c  c04e2000  004e2000  004f2000  2**12
                     CONTENTS, ALLOC, LOAD, DATA
  - 26 .data..init_task 00002000  c04f2000  004f2000  00502000  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 27 .data..page_aligned 00002000  c04f4000  004f4000  00504000  2**12
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 28 .data..cacheline_aligned 00000c00  c04f6000  004f6000  00506000
    2**5
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 29 .data..read_mostly 000015e0  c04f6c00  004f6c00  00506c00  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 30 .sbss         000002e0  c04f9000  004f9000  005081e0  2**3
  + 26 .sbss         000002e0  c04fa000  004fa000  0050835c  2**3
  <...>

This causes boot hang on powerpc. Modify the patch to
ensure that the kernel specific '.data..*' sections
remain separate.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35447
 2013-02-02 09:30:47 +00:00
Gabor Juhos 31af0dc186 ar71xx: fix mac address calculation on the OpenMesh MR600 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35446
 2013-02-02 08:47:41 +00:00
Gabor Juhos 257b21f2d4 mpc85xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35445
 2013-02-01 17:49:56 +00:00
Gabor Juhos cf2faab4ae mpc85xx: switch to 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35444
 2013-02-01 17:49:54 +00:00
Gabor Juhos 56849d146c mpc85xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35443
 2013-02-01 17:49:53 +00:00
Gabor Juhos 630fffbead mpc85xx: fix dts name for P1010RDB 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35442
 2013-02-01 17:49:52 +00:00
Gabor Juhos a2529eab2b linux/3.6: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35441
 2013-02-01 17:30:18 +00:00
Gabor Juhos fb936218a1 linux/3.6: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35440
 2013-02-01 17:30:15 +00:00
Gabor Juhos 495820f7a0 mpc85xx: remove broken flag 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35439
 2013-02-01 17:28:54 +00:00
Gabor Juhos 4cb7e749ab mpc85xx: build fdt file for the PB1010RDB board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35438
 2013-02-01 17:28:51 +00:00
Gabor Juhos 20ca35570e mpc85xx: enable PB1010RDB support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35437
 2013-02-01 17:28:49 +00:00
Gabor Juhos 21b15ddda5 mpc85xx: image: fix building of multiple dtb files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35436
 2013-02-01 17:28:47 +00:00
Gabor Juhos d158dfc607 linux/3.3: disable crashlog on PPC 
It causes NULL pointer dereference:

[    0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c
[    0.644090] Unable to handle kernel paging request for data at address 0x00000000
[    0.651533] Faulting instruction address: 0xc025d620
[    0.656483] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.661856] P1010 RDB
[    0.664113] Modules linked in:
[    0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38
[    0.672101] REGS: c7831ef0 TRAP: 0300   Not tainted  (3.3.8)
[    0.677740] MSR: 00029000 <CE,EE,ME>  CR: 42022082  XER: 20000000
[    0.683817] DEAR: 00000000, ESR: 00000000
[    0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000
[    0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff
[    0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000
[    0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000
[    0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824
[    0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8
[    0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8
[    0.736503] Call Trace:
[    0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable)
[    0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198
[    0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120
[    0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68
[    0.762022] Instruction dump:
[    0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0
[    0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35435
 2013-02-01 17:28:44 +00:00
Gabor Juhos fb2e2a56d7 refresh kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
 2013-02-01 17:28:40 +00:00
Gabor Juhos 6805275fdc ar71xx: sysupgrade - fix OpenMesh MR600 total flash size 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35433
 2013-02-01 15:50:54 +00:00
Gabor Juhos 979676ffcc ar71xx: add sysupgrade support for OpenMesh MR600v2 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35430
 2013-02-01 15:50:47 +00:00
Gabor Juhos 2af995ba1d ar71xx: add user-space support for OpenMesh MR600v2 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35429
 2013-02-01 15:50:45 +00:00
Gabor Juhos 8837d3a49b ar71xx: add kernel support for the OpenMesh MR600v2 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35428
 2013-02-01 15:50:42 +00:00
Gabor Juhos 150bb9d0b1 ar71xx: remove unused OpenMesh MR600 led definitions 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35427
 2013-02-01 15:50:39 +00:00
Gabor Juhos fe3db74276 ar71xx: remove unused OpenMesh MR6000 platform code 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35426
 2013-02-01 15:50:37 +00:00
Gabor Juhos 492cbcdd6b ar71xx: build image for the TL-WDR3500 board 
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35425
 2013-02-01 15:50:34 +00:00
Gabor Juhos 119dc460a3 ar71xx: add user-space support for TL-WDR3500 board 
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35424
 2013-02-01 15:50:32 +00:00
Gabor Juhos 5bd02ca895 ar71xx: add kernel support for the TL-WDR3500 board 
WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.

Pending issues:

  * Leds are not working at all (except power and wlan_5g)
  * LAN switch ethernet ports are reversed with respect to case label.

  [Label] -> soft device
  [LAN1] -> eth0.4
  [LAN2] -> eth0.3
  [LAN3] -> eth0.2
  [LAN4] -> eth0.1

Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35423
 2013-02-01 15:50:29 +00:00
Jonas Gorski ce8b226046 bcm63xx: replace kmod-switch with swconfig in default package set 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35407
 2013-01-30 00:19:21 +00:00
Gabor Juhos f7ff677169 ar71xx: add profile and build image for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35403
 2013-01-29 22:50:57 +00:00
Gabor Juhos 2a5193308f ar71xx: add user space support for dir-825-c1 
[juhosg: fix whitespaces in some scripts]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35402
 2013-01-29 22:50:54 +00:00
Gabor Juhos 800da21cb1 ar71xx: add kernel support for dir-825-c1 
[juhosg:
 - remove unused GPIO stuff
 - use a separate kernel patch for machine integration]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35401
 2013-01-29 22:50:50 +00:00
Gabor Juhos 5a2aa8f184 generic: fix default compression selection in ubifs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35398
 2013-01-29 21:32:22 +00:00
Gabor Juhos da9a704e92 ar71xx: add profile and generate images for the AP132 board 
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35397
 2013-01-29 19:12:34 +00:00
Gabor Juhos 5d4ddbce72 ar71xx: add user-space support for the AP132 board 
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35396
 2013-01-29 19:12:32 +00:00
Gabor Juhos 5ca187570f ar71xx: add kernel support for Atheros AP132 Reference Board 
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35395
 2013-01-29 19:12:30 +00:00
Gabor Juhos 8a9d92f125 ar71xx: fix ethernet device registration for the QCA9556 SoC 
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35394
 2013-01-29 19:12:28 +00:00
Gabor Juhos e9dbff1193 ar71xx: add kernel support for the QCA9556 SoC 
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35393
 2013-01-29 19:12:26 +00:00
Gabor Juhos df15e5cd61 ar71xx: enable fast flash read on dual-flash devices 
This improves flash read speed on various Buffalo units.

mtd_speedtest results on the WZR-HP-AG300H:

                          old         new        delta
eraseblock read speed:  726 KiB/s   2068 KiB/s   +184.85%
page read speed:        699 KiB/s   1973 KiB/s   +182.26%
2 page read speed:      711 KiB/s   2043 KiB/s   +187.34%

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35392
 2013-01-29 19:12:25 +00:00
Gabor Juhos 562ba537fc kernel: update linux 3.7 to 3.7.5 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
 2013-01-29 18:29:45 +00:00
John Crispin c6744513a3 fix mtd_mp25p80_add_gd25q32_gd25q64.patch 
SVN-Revision: 35378
 2013-01-29 11:06:57 +00:00
Florian Fainelli 714b2cfef3 Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit 
Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit.

The patch was added to "linux/generic/patches-3.6" instead of
"target/linux/generic/patches-3.6".
I also fixed a missing patch space and refreshed generic patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35367
 2013-01-29 09:46:11 +00:00
Gabor Juhos e252a1492c generic: fix build failure in MIPS kexec code if SMP is enabled 
Fix it for older kernels as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35366
 2013-01-29 09:44:58 +00:00
Gabor Juhos 22ce389e6a ar71xx: add TP-LINK WA-801ND to run-time model detection 
A small cosmetic fix to show the HW model name correctly in LuCI.

Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35365
 2013-01-29 09:40:29 +00:00
Gabor Juhos 1b3c6ad1fb generic: fix build failure in MIPS kexec code if SMP is enabled 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35364
 2013-01-29 09:40:23 +00:00
John Crispin 756a7c5451 fix for non-blinking LAN LEDs 
https://dev.openwrt.org/ticket/12830

SVN-Revision: 35359
 2013-01-28 18:06:31 +00:00
John Crispin a0f7a3c214 dont load gptu on ase 
fixes #12792

SVN-Revision: 35357
 2013-01-28 17:46:07 +00:00
John Crispin d93706154b ramips: reset switch on single-port devices 
Signed-off-by: Daniel Gole <dgolle@allnet.de>

SVN-Revision: 35356
 2013-01-28 17:44:41 +00:00
John Crispin 0de0955931 refresh patches 
SVN-Revision: 35355
 2013-01-28 17:44:20 +00:00
John Crispin 0183df8ed9 Fix ARV7518 USB 
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
 2013-01-28 17:43:35 +00:00
John Crispin 3534757bb9 Add ath9k eeprom and pci fixup support 
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
 2013-01-28 17:43:25 +00:00
John Crispin 5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A. 
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
 2013-01-28 17:42:59 +00:00
Felix Fietkau 1dc9c8ef69 kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed 
SVN-Revision: 35342
 2013-01-27 23:23:39 +00:00
Hauke Mehrtens 68aeb7af8e brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe. 
SVN-Revision: 35341
 2013-01-27 21:48:28 +00:00
Hauke Mehrtens a9175c90cf kernel: b53: the b53 spi driver depends on spi 
SVN-Revision: 35340
 2013-01-27 21:39:53 +00:00
Hauke Mehrtens 62554217fc kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8 
SVN-Revision: 35336
 2013-01-27 21:18:52 +00:00
Felix Fietkau 8193bbe59a netfilter: add support for flushing conntrack via /proc 
SVN-Revision: 35330
 2013-01-27 19:02:38 +00:00
Felix Fietkau 156a6e7999 kernel: clean up crypto kconfig options on 3.8 
SVN-Revision: 35329
 2013-01-27 17:49:09 +00:00
Hauke Mehrtens 721bf97863 kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8 
These attributes where removed with kernel 3.8 and are now causing compile errors.

SVN-Revision: 35328
 2013-01-27 17:48:48 +00:00
Felix Fietkau ed7ca5d44e kernel: clean up crypto related kconfig options 
SVN-Revision: 35327
 2013-01-27 17:23:12 +00:00
Felix Fietkau 8a1091ad53 ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma 
SVN-Revision: 35326
 2013-01-27 16:38:27 +00:00
Felix Fietkau 044c316167 kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run 
Reduces kernel size after LZMA by about 5k on MIPS

SVN-Revision: 35325
 2013-01-27 16:21:08 +00:00
Hauke Mehrtens e083c7926b brcm47xx: create image for Netgear WNDR3400 V1 
SVN-Revision: 35323
 2013-01-26 20:34:38 +00:00
Hauke Mehrtens 05623aebef brcm47xx: add initial board detection code 
SVN-Revision: 35322
 2013-01-26 20:34:00 +00:00
Hauke Mehrtens a83d7bb109 brcm47xx: add gpio to irq function again 
SVN-Revision: 35321
 2013-01-26 20:33:23 +00:00
Felix Fietkau 8933b918cd kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips 
in combination with kernel symbol export stripping this significantly reduces
the kernel image size

SVN-Revision: 35320
 2013-01-26 16:26:13 +00:00
Gabor Juhos 15be1c9ee7 kernel: update linux 3.7 to 3.7.4 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
 2013-01-24 17:08:37 +00:00
Florian Fainelli 680f460861 kernel: refresh 3.8 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35317
 2013-01-24 17:04:52 +00:00
Florian Fainelli 9781461a3d mvebu: update to 3.8-rc4 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35316
 2013-01-24 17:04:46 +00:00
Hauke Mehrtens 4a69e20a10 kernel: add missing config options for 3.8 
SVN-Revision: 35315
 2013-01-24 14:48:15 +00:00
Hauke Mehrtens 76c12ff797 brcm47xx: change generic profiles 
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.

SVN-Revision: 35314
 2013-01-24 14:38:10 +00:00
Felix Fietkau b60fc82ce5 kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well 
SVN-Revision: 35310
 2013-01-23 16:31:38 +00:00
Felix Fietkau 8ce8960959 ar71xx: sync kernel sizes where possible to fix images for some devices (#12874) 
SVN-Revision: 35309
 2013-01-23 16:29:25 +00:00
Jonas Gorski 8411e5c06e bcm63xx: switch to b53 and swconfig 
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
 2013-01-23 10:12:40 +00:00
Jonas Gorski 17d51121a6 bcm63xx: expose the internal switch to b53 
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35306
 2013-01-23 10:12:37 +00:00
Jonas Gorski bb0118c66f generic: add b53 swconfig switch driver 
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35305
 2013-01-23 10:12:33 +00:00
Jonas Gorski 3e998d9cf9 bcm63xx: move bcm63xx-spi into the kernel 
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35304
 2013-01-23 10:12:13 +00:00
Felix Fietkau 46e4246d61 kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore 
SVN-Revision: 35248
 2013-01-19 19:14:37 +00:00
Gabor Juhos ed6d399f8d ramips: add profile and build image for the Tenda 3G300M 
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35246
 2013-01-19 17:05:07 +00:00
Gabor Juhos 9891603eb5 ramips: add user-space support for the Tenda 3G300M 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
 2013-01-19 17:05:06 +00:00
Gabor Juhos 7eff5d2df0 ramips: add kernel support for the Tenda 3G300M 
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
 2013-01-19 17:05:03 +00:00
Gabor Juhos f7a943694f ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.

Compile-tested, the generated files inspected with "file" utility.

[juhosg:
 - keep the factory.bin images to avoid users confusion,
 - use GENERIC_4M template for the W306R V2.0
 - update commit log]

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35243
 2013-01-19 15:36:13 +00:00
Gabor Juhos 6aebe6a65d ramips: allow to override image name/suffix in GENERIC_{4,8}M macros 
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35242
 2013-01-19 15:36:11 +00:00
Gabor Juhos 60dde219d4 ramips: do not stop the build if some targets fail 
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35238
 2013-01-19 08:51:45 +00:00
Jonas Gorski c3eeff807f generic: rtl8366_smi: only assign pvid if no pvid was set yet 
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged
and untagged traffic on a port and the untagged vlan isn't the last one
of which the port is a member.

Tested on RTL8366S and RTL8367R.

Fixes #8501.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35227
 2013-01-18 15:19:11 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution 
SVN-Revision: 35217
 2013-01-18 12:42:53 +00:00
Gabor Juhos 0de21d9747 kernel: update linux 3.7 to 3.7.3 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
 2013-01-18 11:44:42 +00:00
Florian Fainelli c8215775f3 mvebu: enable PCI in kernel configuration 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35214
 2013-01-17 22:29:26 +00:00
Florian Fainelli 5e45a4344c mvebu: enable PCIe on Marvell Armada 370 Reference Design 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35213
 2013-01-17 22:29:22 +00:00
Florian Fainelli cf9343ac86 mvebu: enable USB on Armada 370 Reference Design 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35212
 2013-01-17 22:29:18 +00:00
Florian Fainelli 7e1e7063c2 mvebu: add preliminary support for PCI express 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35211
 2013-01-17 22:29:13 +00:00
Florian Fainelli 29c21b973b mvebu: refresh patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35210
 2013-01-17 22:28:58 +00:00
Florian Fainelli 28acc6588d kernel: refresh 3.8 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35209
 2013-01-17 22:28:53 +00:00
Florian Fainelli a286a55c6f mvebu: add board detection scripts 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35208
 2013-01-17 22:28:48 +00:00
Florian Fainelli f7858466e2 mvebu: enable /proc/devicetree usage 
This is going to be used for proper user-space board identification (ala
mcs814x).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35207
 2013-01-17 22:28:37 +00:00
Florian Fainelli 15b4681e3e mvebu: add default profile 
Such that relevant kernel modules are selected (USB, I2C, SATA, RTC,
SDIO)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35206
 2013-01-17 22:28:33 +00:00
Jo-Philipp Wich 7399df1d69 x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821) 
SVN-Revision: 35200
 2013-01-17 15:46:26 +00:00
Gabor Juhos 57f7408b8a generic: add EHCI|OHCI platform driver fix to 3.[36] 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35194
 2013-01-17 13:54:14 +00:00
Felix Fietkau 576aa2af0c ramips: enable BR6425N in kernel config 
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35191
 2013-01-17 09:39:44 +00:00
Florian Fainelli 05466923b8 mvebu: add support for EHCI controller 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35181
 2013-01-15 19:55:50 +00:00
Florian Fainelli c53a347034 mvebu: add support for the Marvell Armada 370 Reference Design board 
Keep the patches in sync with the upstream developments.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35179
 2013-01-15 19:55:40 +00:00
Florian Fainelli 58f8c5d87a mvebu: enable SMP with SMP on UP enabled 
The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35178
 2013-01-15 19:55:31 +00:00
Florian Fainelli fa1afc1fa9 mvebu: add support for RTC 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35176
 2013-01-15 19:55:19 +00:00
Felix Fietkau b3b04e9fb1 kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8 
SVN-Revision: 35162
 2013-01-14 18:55:36 +00:00
Gabor Juhos 78dc69e1d4 generic: remove EHCI platform driver fix from 3.8 
It is not needed on 3.8.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35160
 2013-01-14 17:53:55 +00:00
Gabor Juhos b035c594ae generic: add EHCI|OHCI platform driver fix from the cns21xx target 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35159
 2013-01-14 17:47:23 +00:00
Florian Fainelli 1e103b2ecc target: enable XZ BCJ decompressor code after r35097 
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
 2013-01-14 16:34:25 +00:00
Felix Fietkau e0e3509b5c kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx 
SVN-Revision: 35154
 2013-01-14 16:08:18 +00:00
Felix Fietkau 1474359bd3 ar71xx: fix unaligned access in cls_u32 
SVN-Revision: 35132
 2013-01-13 16:48:23 +00:00
Felix Fietkau e67b6ee395 ar71xx: fix unaligned access in a few more places 
SVN-Revision: 35130
 2013-01-13 15:37:58 +00:00
Felix Fietkau b5bcbdfbb5 ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32 
SVN-Revision: 35129
 2013-01-13 14:54:39 +00:00
Felix Fietkau 53e0ba49b9 ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed 
SVN-Revision: 35127
 2013-01-13 13:06:09 +00:00
Felix Fietkau 5d55cece6e kernel: add back the mips module relocation patch 
SVN-Revision: 35126
 2013-01-13 12:23:42 +00:00
Felix Fietkau 764520975c ar71xx: add more cpu feature overrides, slightly reduces kernel size 
SVN-Revision: 35125
 2013-01-13 11:33:48 +00:00
Felix Fietkau 310724c14d ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel 
SVN-Revision: 35124
 2013-01-13 11:33:44 +00:00
Hauke Mehrtens 2bf03f971d brcm47xx: BCMA - Update default IRQ assignment per upstream change 
Update the default IRQ assignment for unrecognized devices per
the upstream change.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35121
 2013-01-12 15:00:01 +00:00
Gabor Juhos 5d1ecfc26d refresh kernel configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35119
 2013-01-12 12:29:55 +00:00
Gabor Juhos ef75e6c71a malta: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35118
 2013-01-12 12:29:53 +00:00
Gabor Juhos 3d057de4db malta: build lzma and gzip compressed uImages 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35117
 2013-01-12 12:29:52 +00:00
Gabor Juhos df8a8f2515 adm5120: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35116
 2013-01-12 12:25:42 +00:00
Gabor Juhos d472567997 adm5120: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35115
 2013-01-12 12:25:40 +00:00
Gabor Juhos eb2188c0e2 ar71xx: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35114
 2013-01-12 12:25:38 +00:00
Gabor Juhos fe86bc9370 ar71xx: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35113
 2013-01-12 12:25:36 +00:00
Gabor Juhos ca882f230d mpc83xx: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35112
 2013-01-12 12:25:34 +00:00
Gabor Juhos eba037cd1f mpc83xx: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35111
 2013-01-12 12:25:32 +00:00
Gabor Juhos ff2ce330a5 ramips: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35110
 2013-01-12 12:25:30 +00:00
Gabor Juhos d53f8c3ded ramips: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35109
 2013-01-12 12:25:28 +00:00
Gabor Juhos f8f009ca43 rb532: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35108
 2013-01-12 12:25:26 +00:00
Gabor Juhos cd71dcdab7 rb532: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35107
 2013-01-12 12:25:24 +00:00
Gabor Juhos 7098354885 ppc44x: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35106
 2013-01-12 12:25:21 +00:00
Gabor Juhos 83fccacec2 ppc44x: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35105
 2013-01-12 12:25:20 +00:00
Gabor Juhos 9d3bae8f0e ppc40x: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35104
 2013-01-12 12:25:18 +00:00
Gabor Juhos 06fea75afb ppc40x: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35103
 2013-01-12 12:25:16 +00:00
Gabor Juhos a51f602494 cns21xx: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35102
 2013-01-12 12:25:14 +00:00
Gabor Juhos bdc6ec4974 cns21xx: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35101
 2013-01-12 12:25:12 +00:00
Gabor Juhos c19c30cefd kernel: update linux 3.7 to 3.7.2 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35100
 2013-01-12 11:43:08 +00:00
Florian Fainelli ecf230710f mvebu: update to 3.8-rc3 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35086
 2013-01-10 17:20:25 +00:00
Hauke Mehrtens 548cb59826 brcm47xx: update bgmac driver to the version in mainline kernel 
SVN-Revision: 35083
 2013-01-10 14:22:19 +00:00
Hauke Mehrtens 885eea1842 kernel: update bcma and ssb to master-2013-01-09 from wireless-testing 
SVN-Revision: 35080
 2013-01-10 14:05:18 +00:00
Imre Kaloz a2950fabd4 clean up PCI bus topology 
This makes the PCI bus topology more standard for devices behind a bridge

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 35079
 2013-01-10 13:25:12 +00:00
Imre Kaloz b63b970866 clean up PCI bus topology 
This makes the PCI bus topology more standard for devices behind a bridge

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 35078
 2013-01-10 13:23:33 +00:00
John Crispin 64910f4490 fixes USB reset on ARV7518 
SVN-Revision: 35077
 2013-01-10 06:44:58 +00:00
John Crispin 4834d09a3f fixes none-pci build 
SVN-Revision: 35062
 2013-01-09 09:04:09 +00:00
Florian Fainelli 25475a095e mvebu: add inital support for Marvell Armada XP/370 SoCs 
This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:

- Ethernet
- SDIO
- GPIOs
- SATA

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35058
 2013-01-08 22:20:16 +00:00
Florian Fainelli 97acd10458 add support for 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35057
 2013-01-08 22:20:11 +00:00
Florian Fainelli 9b601b79d0 add support for 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35056
 2013-01-08 22:20:06 +00:00
Florian Fainelli 8dbed04ec9 kernel: add support for 3.8-rc2 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35055
 2013-01-08 22:19:31 +00:00
Hauke Mehrtens 7b0af8193b brcm47xx: BGMAC Driver corrections 
1) Fix what appears to be a logic error in bgmac_phy_advertise.

2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly.  I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35052
 2013-01-07 22:51:39 +00:00
Florian Fainelli 4ec57bdc06 update to 3.7 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35045
 2013-01-07 18:16:36 +00:00
Gabor Juhos ba4de984b9 ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.

Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.

Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35037
 2013-01-07 14:30:37 +00:00
Gabor Juhos 251e4608b0 ar71xx: add missing Makefile entry to the 74HC153 GPIO patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35035
 2013-01-07 14:14:41 +00:00
Felix Fietkau 5154270694 orion: debloat the kernel some more 
SVN-Revision: 35023
 2013-01-06 15:09:47 +00:00
Felix Fietkau 75657ff8a9 kernel: add missing config symbol 
SVN-Revision: 35021
 2013-01-06 15:09:39 +00:00
John Crispin f2f9332350 adds support for Edimax BR-6524N 
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
 2013-01-06 11:11:42 +00:00
John Crispin d5d2e8b4db missing underscore in 3.3 regmap patch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35018
 2013-01-06 10:01:53 +00:00
Felix Fietkau 2e8409cce3 kernel: port the regmap fix to 3.6 (#12749), refresh patches for other versions 
SVN-Revision: 35016
 2013-01-05 13:33:44 +00:00
John Crispin e6aac19237 fix regmap debloat patch 
SVN-Revision: 35015
 2013-01-05 00:20:05 +00:00
Jonas Gorski e952eaa112 bcm63xx: Add Huawei HG556a support 
Add Huawei EchoLife HG556a support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35011
 2013-01-04 14:47:57 +00:00
Jonas Gorski 0e58173fa5 bcm63xx: Fix caldata partition mtd patch 
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.

Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 35010
 2013-01-04 14:47:50 +00:00
Jonas Gorski 10fc07daac bcm63xx: remove 3.3 support 
3.6 is tested enough to be considered stable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35009
 2013-01-04 14:47:43 +00:00
Felix Fietkau 96f3911981 kernel: move regmap bloat out of the kernel image if it is only being used in modules 
SVN-Revision: 34999
 2013-01-03 18:39:50 +00:00
Hauke Mehrtens a105eea1a1 brcm47xx: various fixes and code cleanups for irq code 
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34997
 2013-01-03 16:56:54 +00:00
Hauke Mehrtens 4443997fd8 brcm47xx: add bgmac driver 
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.

Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.

SVN-Revision: 34995
 2013-01-03 02:05:22 +00:00
Hauke Mehrtens 8f6bdcffa1 brcm47xx: build b44 as a module 
SVN-Revision: 34994
 2013-01-03 02:00:25 +00:00
Hauke Mehrtens 22d62d311a brcm47xx: run ifup before starting the switch 
In addition check_module is not needed, nobody checks the return value.

SVN-Revision: 34993
 2013-01-03 01:59:43 +00:00
Hauke Mehrtens 97b2b601c7 brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core 
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK).  IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34990
 2013-01-03 01:56:13 +00:00
Hauke Mehrtens f74e847301 brcm47xx: improve IRQ handling for bcma based devices 
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34989
 2013-01-03 01:55:34 +00:00
Hauke Mehrtens 25afeba608 brcm47xx: add a new version of the nvram rewrite patch 
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
 2013-01-03 01:53:30 +00:00
Hauke Mehrtens edc7ab525f brcm47xx: move patches already in the mainline kernel to the front 
SVN-Revision: 34987
 2013-01-03 01:51:31 +00:00
Hauke Mehrtens 76c767f122 brcm47xx: remove support for kernel version 3.3 
SVN-Revision: 34986
 2013-01-03 01:48:43 +00:00
Jo-Philipp Wich 7a73c2f91f generic: add some missing kernel config symbols spotted on x86 
SVN-Revision: 34981
 2013-01-02 19:10:24 +00:00
Felix Fietkau 741f6ba7ef x86: fix typo in alix2/net5501 default packages 
SVN-Revision: 34972
 2013-01-02 16:09:23 +00:00
John Crispin 569bbe4970 rt5350 switch support fix 
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
 2013-01-02 11:28:21 +00:00
Gabor Juhos 373b0b9ad1 generic: fix UBIFS build error if XZ compression is disabled 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34959
 2013-01-02 08:53:07 +00:00
Gabor Juhos d91117459c adm5120: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34954
 2013-01-01 13:15:49 +00:00
Gabor Juhos f0520f1714 adm5120: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34953
 2013-01-01 13:15:44 +00:00
Gabor Juhos b4315df8e1 adm5120: switch to 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34952
 2013-01-01 13:15:41 +00:00
Gabor Juhos edd36342e5 adm5120: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34951
 2013-01-01 13:15:36 +00:00
Gabor Juhos 92cd48e9ea adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c 
Also add a compatibility patch for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34950
 2013-01-01 13:15:30 +00:00
Gabor Juhos 03e09078dc adm5120: use mtd_read helper in trxsplit.c 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34949
 2013-01-01 13:15:20 +00:00
Gabor Juhos e1b13e15b2 adm5120: don't include asm/system.h in adm5120-hcd.c 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34948
 2013-01-01 13:15:16 +00:00
Gabor Juhos cbe5d664e1 generic: add missing symbol for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34947
 2013-01-01 13:15:11 +00:00
Gabor Juhos e1965a1d1a ar71xx: register the NAND flash controller device on the AP135/136 boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34946
 2013-01-01 13:10:41 +00:00
Gabor Juhos 66efec6783 ar71xx: allow to register the NAND flash controller on the QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34945
 2013-01-01 13:10:36 +00:00
Gabor Juhos 2c77e5d7b3 ar71xxx: allow to select ATH79_DEV_NFC for QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34944
 2013-01-01 13:10:34 +00:00
Gabor Juhos d8446d65fe ar71xxx: allow to build the ar934x_nfc driver for QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34943
 2013-01-01 13:10:29 +00:00
Gabor Juhos 93c322cacc ar71xx: fix NAND controller base for QCA955x SoCs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34942
 2013-01-01 13:10:26 +00:00
Gabor Juhos b57cc9a538 ar71xx: fold AP135 patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34941
 2013-01-01 13:10:22 +00:00
John Crispin 624eb36fff adds missing symbol 
SVN-Revision: 34939
 2012-12-30 21:31:10 +00:00
John Crispin ce57efa3ea fixes usb port on arv 4518 
SVN-Revision: 34935
 2012-12-30 12:38:40 +00:00
Gabor Juhos fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
 2012-12-30 08:23:48 +00:00
Gabor Juhos 6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
 2012-12-29 17:50:40 +00:00
Gabor Juhos 8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
 2012-12-29 17:50:38 +00:00
Gabor Juhos d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router 
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
 2012-12-29 17:50:35 +00:00
Gabor Juhos 76537041eb ramips: build image for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
 2012-12-29 17:50:34 +00:00
Gabor Juhos 3aad9b4c9b ramips: add user-space support for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
 2012-12-29 17:50:32 +00:00
Gabor Juhos 3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII 
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
 2012-12-29 17:50:28 +00:00
Gabor Juhos 87271e9f28 ar71xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34920
 2012-12-29 16:02:31 +00:00
Gabor Juhos a3a6e0f039 ar71xx: Build the AP135 images 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34919
 2012-12-29 16:02:28 +00:00
Gabor Juhos dddf05bde2 ar71xx: Add userspace support for AP135 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34918
 2012-12-29 16:02:27 +00:00
Gabor Juhos 1a379c5112 ar71xx: Add support for AP135 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34917
 2012-12-29 16:02:24 +00:00
Gabor Juhos c6580f64b8 ar71xx: use a backported patch to fix AR933x UART baud rate calculation 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34915
 2012-12-29 13:52:38 +00:00
Felix Fietkau 348dc70c8c ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size 
SVN-Revision: 34912
 2012-12-28 21:30:24 +00:00
Felix Fietkau 41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration 
SVN-Revision: 34909
 2012-12-28 19:17:19 +00:00
Felix Fietkau 9bb8b9fadb kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes 
SVN-Revision: 34901
 2012-12-27 22:59:51 +00:00
Hauke Mehrtens 981b7410f8 brcm47xx: bcma: correct M25P32 serial flash ID 
Thank you Rafał Miłecki.

SVN-Revision: 34900
 2012-12-27 19:18:40 +00:00
Gabor Juhos 386c37b4c2 mpc83xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34892
 2012-12-26 10:40:54 +00:00
Gabor Juhos f67a7a479e mpc83xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34891
 2012-12-26 10:40:51 +00:00
Gabor Juhos 36af140fe4 mpc83xx: switch to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34890
 2012-12-26 10:40:50 +00:00
Gabor Juhos c4c8307ca1 mpc83xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34889
 2012-12-26 10:40:48 +00:00
Gabor Juhos e537b8a093 mpc83xx: create package for the rbppc_cf module 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34888
 2012-12-26 10:40:47 +00:00
Gabor Juhos fff75fe5b6 generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34887
 2012-12-26 10:40:41 +00:00
Gabor Juhos f5b1cba606 ar71xx: build image for the AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34886
 2012-12-26 09:50:37 +00:00
Gabor Juhos f3f05d86fe ar71xx: add user-space support for AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34885
 2012-12-26 09:50:36 +00:00
Gabor Juhos ed1889db33 ar71xx: add kernel support for the AP136-020 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34884
 2012-12-26 09:50:34 +00:00
Gabor Juhos c887a7fe4e ar71xx: rename AP136 to AP136-010 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34883
 2012-12-26 09:50:31 +00:00
Gabor Juhos f8b4dfd172 ar71xx: dynamically set AR8327's PAD configuration on AP136 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
 2012-12-25 18:45:32 +00:00
Gabor Juhos d4b4c7d102 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34881
 2012-12-25 18:45:31 +00:00
Gabor Juhos 1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
 2012-12-25 18:45:29 +00:00
Gabor Juhos 69da894432 ramips: fix ASUS WL-330N3G MAC address 
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
 2012-12-24 06:52:41 +00:00
Gabor Juhos c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models 
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
 2012-12-24 06:52:38 +00:00
Imre Kaloz 2c05915b24 add nol2x0 cmdline to disable l2x0 cache 
L2 cache via L2X0 cache controller available on some ARM boards can
provide a performance boost in some situations but decrease performance
in others.  This adds a kernel cmdline to disable L2X0 for cns3xxx based
boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34874
 2012-12-23 18:53:38 +00:00
Gabor Juhos c3cb63661f generic: ar8216: don't use 0 as default VID on AR8327 
VID0 is reserved for priority-tagged packets.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34862
 2012-12-22 18:30:04 +00:00
Gabor Juhos fa9d06c7f4 generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34861
 2012-12-22 17:22:41 +00:00
Gabor Juhos 8105c6badd ramips: unify eeprom file name for the built-in wireless MAC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
 2012-12-22 16:09:03 +00:00
Gabor Juhos c81b4475c9 ramips: rt3883: fix build error 
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
 2012-12-22 13:50:47 +00:00
Gabor Juhos 64d31e6c6b ar71xx: register the second ethernet interface on the AP136 
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34854
 2012-12-22 12:12:50 +00:00
Gabor Juhos 5dec87afef ar71xx: fix ethernet device registration for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
 2012-12-22 12:12:48 +00:00
Gabor Juhos 84a7051cef ar71xx: rename QCA9558 ETH_CFG bit defines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34852
 2012-12-22 12:12:46 +00:00
Gabor Juhos 4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
 2012-12-22 12:12:44 +00:00
Gabor Juhos f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
 2012-12-22 12:12:43 +00:00
Gabor Juhos 9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
 2012-12-22 12:12:41 +00:00
Gabor Juhos ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
 2012-12-22 12:12:40 +00:00
Gabor Juhos 3931c9524c generic: ar8316: allow to configure port 6 via platform data on AR8327 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34847
 2012-12-22 12:12:37 +00:00
Gabor Juhos a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
 2012-12-22 12:12:35 +00:00
Gabor Juhos b44cdcde8e ramips: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
 2012-12-22 12:11:13 +00:00
Gabor Juhos b81667cb23 ramips: convert to use {e,o}hci-platform driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
 2012-12-22 12:11:08 +00:00
Gabor Juhos c0e1a6f342 generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers 
Backport of upstream commits:

86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34842
 2012-12-22 12:11:06 +00:00
John Crispin efe3225e2b ar9 did not load atm driver properly 
SVN-Revision: 34840
 2012-12-22 10:16:52 +00:00
John Crispin 379cd6e25e dont use input layer for gpio buttons 
SVN-Revision: 34839
 2012-12-21 20:04:20 +00:00
John Crispin 90a3761b0b default switch setup for WBMR 
SVN-Revision: 34838
 2012-12-21 20:04:12 +00:00
John Crispin ae0b9ff1ce Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

SVN-Revision: 34837
 2012-12-21 20:04:04 +00:00
John Crispin 9818a1f00b adds script to set wps info on boards with a wps button 
SVN-Revision: 34836
 2012-12-21 20:03:59 +00:00