a90ec7a0ef
x86/olpc: remove old kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39732
2014-02-23 18:20:32 +00:00
a485bd350b
x86/olpc: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39731
2014-02-23 18:20:30 +00:00
543fc517f4
x86/olpc: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39730
2014-02-23 18:20:29 +00:00
c384015892
x86/net5501: remove old kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39729
2014-02-23 18:09:33 +00:00
3488372fa7
x86/net5501: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39728
2014-02-23 18:09:32 +00:00
8dc438ea7f
x86/net5501: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39727
2014-02-23 18:09:31 +00:00
a70282720d
ubus: update to latest version, fixes lua binding issues and adds fd passing support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39726
2014-02-23 17:32:26 +00:00
f2719168ba
libubox: update to latest version, improves uloop error handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39725
2014-02-23 17:32:22 +00:00
a42b421c79
procd: depend on libubox directly to rebuild on ABI changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39724
2014-02-23 17:32:18 +00:00
a15524582c
netifd: depend on libubox directly to rebuild on ABI changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39723
2014-02-23 17:32:15 +00:00
01c4775116
ubus: declare main version as ABI version for libubus
...
Reorder BuildPackage calls, as libubox needs to come first for ABI
version handling to work
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39722
2014-02-23 17:32:11 +00:00
538e38f5d3
libubox: declare main version as ABI version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39721
2014-02-23 17:32:07 +00:00
623825103e
build: allow packages to declare ABI versions to detect necessary package rebuilds
...
If a package directly depends on another package that recently changed
its ABI version, it will be cleaned up and rebuilt (assuming quilt is
not used).
This helps with packages that have no stable ABI, e.g. libubox, ubus,
etc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39720
2014-02-23 17:32:04 +00:00
f587bacc26
brcm47xx: b44: start the phy
...
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39719
2014-02-23 16:58:12 +00:00
15a7efa119
brcm47xx: fix detection of some Linksys WRT54G* devices
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39718
2014-02-23 15:57:37 +00:00
455ee13faf
x86/thincan: remove old kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39717
2014-02-23 13:07:24 +00:00
d5ab9b12bf
x86/thincan: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39716
2014-02-23 13:07:23 +00:00
b8061d4e8e
x86/thincan: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39715
2014-02-23 13:07:22 +00:00
4ae644c137
x86/xen_domu: remove old kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39714
2014-02-23 13:00:23 +00:00
24ef414bec
x86/xen_domu: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39713
2014-02-23 13:00:21 +00:00
f333739c24
x86/xen_domu: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39712
2014-02-23 13:00:16 +00:00
c0405b152f
x86/geos: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39711
2014-02-23 12:50:19 +00:00
a7db713477
x86/geos: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39710
2014-02-23 12:50:18 +00:00
944edb47f9
x86/geos: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39709
2014-02-23 12:50:16 +00:00
b5fdd769f0
brcm63xx: update LINUX_VERSION to 3.10.32
...
Missed from the previous comit.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39708
2014-02-23 11:07:58 +00:00
f677b1bc7e
kernel: update 3.10 to 3.10.32
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
6c8300df3d
netifd: update to latest version, fixes wireless device reload handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39706
2014-02-23 08:13:28 +00:00
590bafe3de
ar71xx: define status LED for the RB91x boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39705
2014-02-23 08:11:54 +00:00
da2f3c1448
ar71xx: rb91x: register GPIO LEDs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39704
2014-02-23 08:11:53 +00:00
14d95026b2
ar71xx: rb91x: add SPI device for the serial shift register
...
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.
Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39703
2014-02-23 08:11:52 +00:00
7b89005f0d
ar71xx/mikrotik: enable the 74x164 GPIO driver
...
That will be used to drive the 74HC595 serial-in/parallel-out
8-bits shift register which can be found on some RouterBOARDs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39702
2014-02-23 08:11:50 +00:00
5f224ef8a3
ar71xx: improve platform device support in the gpio-74x164 driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39701
2014-02-23 08:11:49 +00:00
3d906ac6ac
ar71xx: rb91x-nand: rewrite to use GPIO API
...
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39700
2014-02-23 07:19:32 +00:00
8fea668cb7
ar71xx: rb91x: register a gpio-latch platform device
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39699
2014-02-22 18:05:32 +00:00
da5caba072
ar71xx/mikrotik: enable the GPIO latch driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39698
2014-02-22 18:05:31 +00:00
ab08c40487
ar71xx: add a generic GPIO latch driver
...
It will be used for the Mikrotik boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39697
2014-02-22 18:05:29 +00:00
be18a3849b
ar71xx/mikrotik: enable small sector erase in the m25p80 driver
...
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39696
2014-02-22 16:26:55 +00:00
b7539ab109
ar71xx: spi-ath79: fix initial GPIO CS line setup
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39695
2014-02-22 16:17:28 +00:00
3e6c7ed4f2
ar71xx: refresh unaligned access hacks patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39694
2014-02-22 16:17:27 +00:00
86f5a9cf78
target/sunxi: add dependency on sunxi to kmod-wdt-sunxi
...
SVN-Revision: 39693
2014-02-22 15:51:11 +00:00
7a8f13f33c
gianfar: Fix reported number of sent bytes to BQL
...
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
SVN-Revision: 39692
2014-02-22 14:42:48 +00:00
8167b27bca
ath5k: mark the current survey channel as being used
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39691
2014-02-22 13:57:09 +00:00
08255e0237
ath9k: reduce unnecessary logspam ( #14940 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39690
2014-02-22 13:48:56 +00:00
3ae79cd848
ath9k: fix issues with 5/10 mhz channel bandwidth ( #14916 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39689
2014-02-22 13:43:48 +00:00
ec4ab71c54
ath9k: fix issues that have been plaguing some powersave clients since the tx queueing rework ( #14092 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39688
2014-02-22 13:01:11 +00:00
b75914d2fb
ath9k: show more reset causes in debugfs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39687
2014-02-22 13:01:07 +00:00
ca82dfe31b
mac80211: merge some upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39686
2014-02-22 13:01:04 +00:00
fc0a51c2e1
ath9k: enable u-apsd support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39685
2014-02-22 13:01:00 +00:00
b44e9bff9d
ath9k: add a tx locking fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39684
2014-02-22 13:00:55 +00:00
c1f397e1e1
b53: Make b53_switch_init static
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39683
2014-02-22 11:16:58 +00:00
Gabor Juhos
Felix Fietkau
Hauke Mehrtens
Nicolas Thill
Jonas Gorski