Commit Graph

25875 Commits (9706d4e00e4309b0872df87635d214d5a169827d)

Author SHA1 Message Date
Felix Fietkau 9706d4e00e cmake.mk: fix support for ccache
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38853
2013-11-18 14:10:12 +00:00
Felix Fietkau cd1c8d463f hostapd: remove random pool support - the entropy it gathers is questionable and we have better entropy sources on common platforms now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38852
2013-11-18 13:54:26 +00:00
Felix Fietkau edc8ac6246 uClibc: Deactivate oversized thread stack cache
A small system like the common home router doesn't have 40 MiB per process for
a dirty stack cache. This can easily lead to an overbooking OOM problem and
caused a lot of hangs+reboots on 32 MiB systems running nodogsplash.

Not using a stack cache can increase the time to spawn new threads. This is
hopefully no problem for system not running a lot of parallel computations.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 38851
2013-11-18 13:32:06 +00:00
Imre Kaloz d38c28b58c make default packages selected for real
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38850
2013-11-18 12:05:11 +00:00
Jo-Philipp Wich bc9043cc53 firewall: optimize DNAT rules and skip invalid rules and redirects (#14485)
- instead of writing one (or more) ACCEPT rules in the filter table
	  for each redirect install a global ctstate DNAT accept rule per zone

	- discard rules and redirects which have invalid options set instead
	  of silently skipping the invalid values

SVN-Revision: 38849
2013-11-18 11:59:27 +00:00
John Crispin 82e6242798 ralink: add support for ralink mt7620 nand eval board
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38848
2013-11-18 09:35:41 +00:00
John Crispin a17e5159ac ralink: improve mt7620n detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38847
2013-11-18 09:35:32 +00:00
John Crispin f307b35c8b ralink: add mt7620 nand driver
This is a minor rework of the SDK driver. This driver needs a full rewrite.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38846
2013-11-18 09:35:23 +00:00
John Crispin 9d4eb0ac91 ralink: make all none 3x5x boards default to a vlan1/2 setup
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38845
2013-11-18 09:35:14 +00:00
John Crispin 3d547b740a ralink: make usb work on the mt7530 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38844
2013-11-18 09:34:46 +00:00
Hauke Mehrtens c9be7cfef9 mac80211: ath10k: add board.bin file again
This file is still needed with the new firmware.

This fixes r38835.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38843
2013-11-17 17:57:37 +00:00
Hauke Mehrtens f4cd36d825 at91: fix typo in network file
This closes #14474.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38842
2013-11-17 17:14:32 +00:00
Hauke Mehrtens df7e855df0 kernel: add vmxnet3 module
support VMware ethernet adapters

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 38840
2013-11-17 16:41:40 +00:00
Hauke Mehrtens 1859b36bf7 xfsprogs: move to submenu Filesystem
move xfsprogs to the right submenu
e2fsprogs, btrfs-progs and other stuff is there already

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 38838
2013-11-17 16:14:58 +00:00
Hauke Mehrtens 6d4132b7a4 kirkwood: add missing kernel config CONFIG_REGMAP=y
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 38837
2013-11-17 16:05:09 +00:00
Hauke Mehrtens 2c26cd9bbd mac80211: update ath10k firmware
Current version of ath10k in the recently updated wireless-testing
package requires a new firmware. This patch fixes the issue.

v2:
* fix (hopefully) the mangled whitespaces
* actually install the new firmware instead of the old

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 38835
2013-11-17 15:52:55 +00:00
Hauke Mehrtens eea5c0b166 kernel: backport get_cycles() fix
get_cycles() is used in some places as one part of the seed for the
kernel PRNG.

This backports the following commit from mainline linux kernel:
9c9b415c50bc298ac61412dff856eae2f54889ee

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38834
2013-11-17 15:52:14 +00:00
Hauke Mehrtens 51502a5e29 mac80211: add blink api backport
This patch was copied from a more recent backports versions. This fixes
a build problem with kernel < 3.6.

This closes #14475

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38833
2013-11-17 15:50:54 +00:00
John Crispin 269cbfa06a ralink: add mt7620n dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38829
2013-11-17 13:22:01 +00:00
John Crispin 5c2e867460 ramips: fix wmr300 network detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38828
2013-11-17 13:14:46 +00:00
Zoltan Herpai 9269e58b2a kernel: add fix to block2mtd driver for modified error logging
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38827
2013-11-17 11:57:57 +00:00
Zoltan Herpai 3a99e895ff kernel: add missing symbols for 3.12
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38826
2013-11-17 11:55:23 +00:00
John Crispin dce9b292bf ralink: add mt7620n support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38823
2013-11-16 20:28:52 +00:00
John Crispin 5fbfffe7f4 procd: ubox: update to latest git head
move log service from procd to ubox
some debloating on procd
the preinit part of procd is now also a seperate binary

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38822
2013-11-16 20:20:30 +00:00
Zoltan Herpai c4d8ddf1dc kernel: add missing symbols for 3.12
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38820
2013-11-16 11:52:30 +00:00
Luka Perkov dd0e3a58c6 sunxi: remove old kernel config after 3.12 upgrade (r38811)
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38819
2013-11-16 10:17:38 +00:00
Steven Barth b5a4fb1c95 6rd: Clear correct IPv6 address bits in 6rdcalc
The correct bits are now cleared in the IPv6 address as the shift
value to the correct byte in the IPv6 address was wrong. Depending
on the stack values this could result in a hanging 6rdcalc program
due to an endless loop.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 38818
2013-11-16 09:18:14 +00:00
Imre Kaloz e4eef7e620 replace the TI patch with a smaller patchset
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38816
2013-11-15 12:23:17 +00:00
Gabor Juhos 1f34789015 ar71xx: add profile for the WR842N/ND v2
Patch to add the profile for the TP-LINK WR842N/ND v2
Small update, because of a change in the Makefile.

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4382/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38815
2013-11-15 10:11:25 +00:00
Gabor Juhos ed036155ee ar71xx: add user space support for the TL-WR842N/ND v2
Patch to add the user space support for the TL-WR842N/ND v2

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4354/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38814
2013-11-15 10:11:24 +00:00
Gabor Juhos 625cf61c5b ar71xx: Add kernel support for the WR842N/ND v2
Patch to add kernel support for the TP-LINK WR842N/ND v2

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4352/
[juhosg: refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38813
2013-11-15 10:11:20 +00:00
Gabor Juhos 67eded254a ar71xx: wndr4300: set official mac addresses
Get the factory assigned mac addresses stored in the caldata
partition and asign them to lan and wan interfaces. Also put
the correct mac addresses into the WiFi eeprom files to ensure
that the ath9k driver will use the correct ones.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Patchwork: http://patchwork.openwrt.org/patch/4350/
[juhosg:
  - move WiFi MAC address setup to the firmware hotplug file,
  - use the official MAC address for the 2.4GHz as well,
  - remove uci-defaults.sh modifications,
  - update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38812
2013-11-15 08:21:59 +00:00
Zoltan Herpai f58bfd1df4 sunxi: rework target - update kernel to 3.12 - add patches for clocks, i2c, usb, sid, rtc - support common image for A10/A13/A20 - add support for a couple boards - most drivers are configured into the kernel as of now
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38811
2013-11-14 23:12:52 +00:00
Felix Fietkau 2077361f12 kernel: backport an upstream fix to improve TCP performance for wifi drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38810
2013-11-14 22:01:24 +00:00
Felix Fietkau 1f819564d1 openssl: add support for RIPEMD/160
RIPEMD is needed to update erlang and i'd like to enable RIPEMD160 support in openssh.

Size compared:

openssl without RIPEMD/160 support:
647K 29. Okt 20:00 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk

openssl with RIPEMD/160 support:
652K  8. Nov 15:11 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk

So the file size just grows ~5kb, which shouldn't be a problem.

Signed-off-by: Peter Wagner <tripolar@gmx.at>

SVN-Revision: 38809
2013-11-14 20:42:15 +00:00
Felix Fietkau d923eab86e rt2x00: fix a crash in the recent update (#14467)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38808
2013-11-14 20:32:36 +00:00
Felix Fietkau ff17114ba1 ar71xx: Unifi AP Pro sysupgrade patch
The current implementation of mtd will not append the backup
file created by sysupgrade to the correct partition, as mtd will append
the data to first jffs2 partition it finds. As the kernel is also
stored on a jffs2 partition (which resides before the overlay
partition), the data will be appended to this partition.

To fix this problem, a new option

-s <number>             skip the first n bytes when appending data to the jffs2 partiton, defaults to "0"

is added to mtd.

Signed-off-by: Peter Wagner <tripolar@gmx.at>

SVN-Revision: 38807
2013-11-14 19:38:54 +00:00
Felix Fietkau 9aca892304 ramips: use dd bs=4096k instead of bs=4M to make it more portable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38806
2013-11-14 19:16:04 +00:00
Felix Fietkau f38e6c782c ar71xx: use the new padjffs2 padding on Ubiquiti UAP-PRO to make the boot loader stop searching after the kernel partition
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38805
2013-11-14 19:04:48 +00:00
Felix Fietkau cc8350c5ec padjffs2: add a different kind of padding (using standard jffs2 elements) to work around broken boot loaders for kernel partitions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38804
2013-11-14 19:04:44 +00:00
Gabor Juhos b7914344ad base-files: add macaddr_canonicalize helper function
In commit r38690, the MAC address canonicalization
has been converted to use 'tr' instead of 'printf'.
This only works if with MAC addresses which uses
the 'xx:xx:xx:xx:xx:xx' format.

However on some boards, the MAC addresses are stored
in different format in the mtd partition. Some vendors
are using hyphens or dots as separators instead of
colons. Also the leading zeroes may be missing from the
individual octets or those are replaced with spaces.

Add a new function which can be used to convert these
into the 'xx:xx:xx:xx:xx:xx' format. Also update the
'mtd_get_mac_ascii' function to use the new helper.

The helper function is based on this code:
  http://isquared.nl/blog/2010/08/11/Bash-function-to-canonicalize-MAC-addresses/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38803
2013-11-14 17:44:42 +00:00
Felix Fietkau 4a977252f5 ath9k: add a fix to improve reliability of high bitrates on AR93xx/AR95xx
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38802
2013-11-14 12:21:24 +00:00
Felix Fietkau 5113f2d6c2 mac80211: merge a patch that enables DFS for ad-hoc mode
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38801
2013-11-14 12:21:19 +00:00
Luka Perkov d15107fe23 Config.in: drop TARGET_UBIFS_SQUASH_UIDS, it's used by default now
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38800
2013-11-14 01:35:22 +00:00
Luka Perkov b4ecda7b3f image: don't force ubifs journal size
Small journal size can lead to problems if nand flash is too big. By default
ubifs will use ~12% of volume size or a maximum of 8MiB.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38799
2013-11-14 01:35:21 +00:00
Hauke Mehrtens c43d2285e0 mac80211: update regdb.txt
This was copied from wireless-regdb.git commit a14052b85e5d70e37a31962a9c56c0cdbb9acafc

The passive-scan/no-ibss flag of channels 36-48 in the world regd were
removed like it was done in r32126.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38797
2013-11-13 22:36:12 +00:00
Hauke Mehrtens a3752801df bcm53xx: this ARM SoC does not have a FPU, use soft float.
model name      : ARMv7 Processor rev 0 (v7l)
Features        : swp half thumb fastmult edsp tls

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38796
2013-11-13 22:26:08 +00:00
Hauke Mehrtens 0ade818cb7 zram-swap: fix dependencies
swapon/swapoff are no longer provided by swap-utils; they are provided
by block-mount instead.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38795
2013-11-13 18:42:45 +00:00
Hauke Mehrtens 4abd860ab2 brcm47xx: swap also early boot console if necessary.
Some devices are using tty1 as the default console, also swap the early
boot console in such case. This is needed for the WGT634U.

Thank you Russell for reporting this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38794
2013-11-13 18:38:18 +00:00
Hauke Mehrtens 0cdab0237d kernel: b53: fix untagged shift for BCM5365
The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for
the untagged ports.

Thank you Russell for reporting this and testing the patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38793
2013-11-13 18:04:39 +00:00