936320f1f9
swconfig: fix vlan/port configs being applied to all switches
...
Check devn instead of dev (which will never be null at this point).
SVN-Revision: 28362
2011-10-03 23:39:31 +00:00
5171edd8d5
kernel-build.mk: there is no tarball when using CONFIG_KERNEL_GIT_CLONE_URI or CONFIG_EXTERNAL_KERNEL_TREE, do not make the prepared stamp file depend on it in this case
...
SVN-Revision: 28361
2011-10-03 11:33:13 +00:00
b292524c13
kernel.mk: also do not download Linux if CONFIG_KERNEL_GIT_CLONE_URI is set
...
SVN-Revision: 28360
2011-10-03 10:19:25 +00:00
b0345ef184
Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17
...
SVN-Revision: 28357
2011-10-03 04:39:54 +00:00
c0a625ffbf
Add patch for linux-3.0 as well.
...
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55
SVN-Revision: 28356
2011-10-03 03:09:20 +00:00
7e372b6dcf
New x86 platform specific symbol needed for 3.1-rc3.
2011-10-03 03:06:29 +00:00
aaba775f36
The name gpio-cs5535 used to refer to the drivers/char/ module, but in 3.1 it refers to what had been drivers/gpio/cs5535-gpio in more recent kernels. Philip Prindeville - 2011-08-29 04:55:59
...
SVN-Revision: 28354
2011-10-03 03:04:11 +00:00
541aa8e38e
A lot of these options get set automatically when Geode is selected.
...
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27
SVN-Revision: 28353
2011-10-03 03:02:42 +00:00
3233a7f4a2
package I2C_MUX_GPIO
...
this module was missing from [28334]
buildbots timed out as the symbol was not defined
SVN-Revision: 28352
2011-10-01 22:36:47 +00:00
e477159e40
ath9k: add some more fixes to AP handling of buffered frames for powersave clients
...
SVN-Revision: 28344
2011-09-30 22:23:35 +00:00
3802769ea1
add vlan definitions for Siemens SE505v2
...
Hi,
this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.
It also fixes two whitespace issues.
Tested with brcm47xx on both trunk and backfire branch and works as
expected.
Signed-off-by: Manuel Munz <freifunk@somakoma.de>
SVN-Revision: 28336
2011-09-30 12:55:33 +00:00
cfc370eea0
add kmod-hwmon-lm95241
...
This allows building the module for the national lm95241 i2c temperature sensor.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28335
2011-09-30 12:55:30 +00:00
d53022a424
add support for more i2c muxes
...
This patch should bring support for several kernel modules related to
I2C to openwrt, which are existing for several years now. Namely there
is the i2c-tiny-usb bus driver, to hook up an I2C bus on any device with
usb support (prevent voiding warranty when opening and soldering).
Second, there is support for the i2c-mux driver and pca954x as a I2C
switch driver.
Finally there is support for common I2C gpio expander driver modules
pca953x and pcf857x. They work without providing platform data recently
(can be instantiated at runtime).
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 28334
2011-09-30 12:55:26 +00:00
ddf842d573
dnsmasq: update to 2.58
...
patch by Raphael Huck.
SVN-Revision: 28333
2011-09-30 12:55:23 +00:00
1b8dd6ed1c
build system: add support for download-time make hooks
...
SVN-Revision: 28322
2011-09-30 11:12:13 +00:00
f3be1b4890
hostap-driver: introduce "disabled" option for wifi-iface section to shutdown single networks on a radio
...
SVN-Revision: 28318
2011-09-29 12:37:04 +00:00
f8bfab96cb
kernel: remove the x86 dependency from kmod-sky2 so that it can be used on other platforms as well
...
SVN-Revision: 28314
2011-09-28 22:05:32 +00:00
aecc73de77
The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code.
...
SVN-Revision: 28310
2011-09-26 10:35:51 +00:00
1ef8066bff
* remove obseleted m25p80 patch
...
SVN-Revision: 28309
2011-09-26 09:36:02 +00:00
cf59e7255d
* rebase 3.0 patches * fold some fixes into existing patches
...
SVN-Revision: 28308
2011-09-26 09:35:02 +00:00
07986230f1
* fixes brnboot image generation
...
SVN-Revision: 28307
2011-09-26 09:00:11 +00:00
bfbbe5893f
base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
...
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
29123aee6d
image.mk: pass through $(CONFIG_PKG_BUILD_JOBS) to the mksquashfs -processors option
...
SVN-Revision: 28305
2011-09-26 02:02:35 +00:00
a66d423560
ath9k: fix some tx aggregation issues - reduces the number of tx dma stop failures
...
SVN-Revision: 28301
2011-09-25 18:34:54 +00:00
f45bd67de0
ath9k: merge a pending fix for powersave
...
SVN-Revision: 28300
2011-09-25 18:34:38 +00:00
6addd50b9d
mac80211: rework mac address generation for virtual interfaces; set locally administered bit on generated macs and change the last two bytes isntead of the first one
...
SVN-Revision: 28298
2011-09-25 14:14:37 +00:00
4246c6a6b5
base-files: apply network interface settings such as macaddr, mtu and txqueuelen in prepare_interface instead of setup_interface. setting the mtu after the interface is up is unreliable on some drivers such as gianfar
...
SVN-Revision: 28297
2011-09-24 20:34:17 +00:00
6ac4156136
ar71xx: fix MAC addresses on the DIR-825-B1 board
...
Patch-by: Lukas Kuna
SVN-Revision: 28295
2011-09-23 19:56:39 +00:00
e45d7d7006
ar71xx: enable login only on the system console by default
...
SVN-Revision: 28294
2011-09-23 19:56:38 +00:00
5fc14dfb87
linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure)
...
SVN-Revision: 28293
2011-09-23 10:00:13 +00:00
41838f4585
base-files: make ip matching in dns add/remove functions more explicit, avoids overmatching pairs like 1.2.3.35 and 1.2.3.3
...
SVN-Revision: 28291
2011-09-23 08:35:50 +00:00
896847d18c
kernel: modules: usb.mk: fix a typo
...
Closes #10143 .
SVN-Revision: 28290
2011-09-22 20:14:42 +00:00
49ac36e818
ar71xx: build images for the TP-Link TL-WR703N v1 board
...
Based on a patch by dongyuqi <729650915@qq.com>
SVN-Revision: 28279
2011-09-21 11:47:56 +00:00
712521955b
firmware-utils/mktplinkfw: add support for TL-WR703N v1
...
Patch-by: dongyuqi <729650915@qq.com>
SVN-Revision: 28278
2011-09-21 11:47:55 +00:00
733399600f
ar71xx: add support for the TP-Link TL-WR703N v1 board
...
Based on a patch by dongyuqi <729650915@qq.com>
SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
d3617ac7d3
ar71xx: add AR933x specific USB setup function
...
SVN-Revision: 28276
2011-09-21 11:47:51 +00:00
91340d8af7
ar71xx: add ar71xx_device_reset_rmw helper
...
SVN-Revision: 28275
2011-09-21 11:47:50 +00:00
9fa51d5c38
ar71xx: fix copy&paste bug in WZRHPAG300H profile description
...
SVN-Revision: 28274
2011-09-21 11:47:48 +00:00
079e746fc4
ar71xx: remove 'default [yn]' from machine Kconfig entries
...
SVN-Revision: 28273
2011-09-21 11:47:47 +00:00
73dac07c44
ar71xx: sort AR71XX_MACH_* entries
...
SVN-Revision: 28272
2011-09-21 11:47:45 +00:00
ef2431c8d9
ar71xx: create image for the TP-Link TL-WR743ND v1
...
Same hardware as WR741ND but with PoE support.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 28271
2011-09-21 11:47:44 +00:00
ffbdaf8ec8
firmware-utils/mktplinkfw: add support for TL-WR743ND v1
...
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 28270
2011-09-21 11:47:42 +00:00
76d0d1a837
ar71xx: create image for the TP-Link TL-WR740N v3
...
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>
SVN-Revision: 28269
2011-09-21 11:47:40 +00:00
9faace4327
firmware-utils/mktplinkfw: add support for TL-WR740N v3
...
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>
SVN-Revision: 28268
2011-09-21 11:47:39 +00:00
93c093057d
generic: jumbo frames support for rtl8366s
...
This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.
I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.
Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>
SVN-Revision: 28267
2011-09-21 11:47:38 +00:00
ffb56132e4
package/maccalc: don't expect to get all data in one read
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 28266
2011-09-21 11:47:35 +00:00
51a4dc1bb2
wpa_supplicant: increase the time between scans to reduce the number of hw resets
...
SVN-Revision: 28262
2011-09-20 14:45:38 +00:00
6848e9c830
ath9k: fix antenna gain calculation
...
SVN-Revision: 28261
2011-09-20 10:42:45 +00:00
ece2882ea4
ath9k: fix handling configured tx power limits
...
SVN-Revision: 28260
2011-09-19 17:36:41 +00:00
f4954abe39
b43: merge ad-hoc beacon fix
...
SVN-Revision: 28258
2011-09-19 09:59:00 +00:00
Jonas Gorski
Jo-Philipp Wich
Daniel Dickinson
John Crispin
Felix Fietkau
Florian Fainelli
Vasilis Tsiligiannis
Gabor Juhos
Alexandros C. Couloumbis