244c322d25
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
...
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
f50b02b559
ramips: rt288x: change base address and window size of flash bank 0
...
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
98437278c4
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
...
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
723d8dd74f
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
...
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
7b1e525b56
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
2cb946f5b4
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
03bce34384
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
SVN-Revision: 29602
2011-12-23 14:27:05 +00:00
0c38d36488
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
56c9b50006
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29422
2011-12-04 15:24:57 +00:00
62d18e9f9a
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29381
2011-12-01 22:48:42 +00:00
2dd79d55c7
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29380
2011-12-01 22:48:41 +00:00
ee8077f0fe
ramips: Support for NexAira BC2
...
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]
Signed-off-by: Adam Porter <porter.adam at gmail.com>
SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
18452a753b
ramips: fix switch-port assignment for HW550-3G
...
WAN is on swtich port 0 for Aztech HW550-3G.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
72e117ec79
ramips: rt305x: add support for the ZyXEL NBG-419N board
...
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
4b96d3af2a
ramips: rt305x: remove unused defines from mach-nw718.c
...
SVN-Revision: 28077
2011-08-22 20:41:48 +00:00
462ca22e9c
ramips: sort Makefile entries
...
SVN-Revision: 28076
2011-08-22 20:41:47 +00:00
d50494f3bb
ramips: sort RAMIPS_MACH_* defines
...
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
f0049824b9
ramips: remove 'default [yn]' keywords from machine Kconfig entries
...
SVN-Revision: 28054
2011-08-19 15:55:12 +00:00
9085b05d9e
ramips: rt305x: support for wr512-3gn-like routers
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
46b101ad0a
ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28051
2011-08-19 15:55:08 +00:00
35ecf12059
ramips: rt305x: make config and factory partitions read-only on the ATP-52B
...
SVN-Revision: 28002
2011-08-15 18:55:48 +00:00
169d68c98c
ramips: rt305x: add dwc_otg driver
...
Based on a patch by Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27997
2011-08-15 14:11:55 +00:00
0ca16a4600
ramips: rt305x: register the dwc_otg device on the relevant boards
...
SVN-Revision: 27996
2011-08-15 14:11:52 +00:00
addc86fdbd
ramips: rt305x: add dwc_otg platform device
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 27995
2011-08-15 14:11:51 +00:00
a3c7e71ae1
ramips: add support for Argus ATP-52B
...
[The ESW related changes has been removed - juhosg]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
1ebcf03789
ramips: allow to specify port layout for the switch of the RT305x/RT3350
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27990
2011-08-15 14:11:43 +00:00
ea211c4d90
ramips: rt305x: add support for the Netcore NW718 board
...
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
437e184484
ramips: rt305x: add support for the Asus RT-G32 B1 board
...
Based on a patch by: Sergiy <piratfm@gmail.com>
SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
c6db514de8
ramips: rt305x: introduce rt305x_register_spi helper
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
57122e7ccc
ramips: add SPI controller driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
3f986df05f
ramips: rt305x: add support for the DIR-600 B1,B2 boards
...
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
857c1028ac
ramips: rt305x: change machine id for DIR-300
...
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
42d3a55347
ramips: rt305x: rename LEDs on the DIR-300-B1
...
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
39689b648f
ramips: rt305x: sort Kconfig/Makefile entries
...
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
1afe8a0726
rtl8366: unify rtl8366s and rtl8366rb platform data
...
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
6e7b802297
ramips: merge 2.6.39 patches
...
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
3334d0604e
ramips: specify eeprom file name on RT305X
...
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
f53cc4c439
ramips: specify eeprom file name on RT288X
...
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
575a5286c8
ramips: use lowercase partiion names on the WCR150GN board
...
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
f1cf43d468
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
641c87b127
ramips: consistently use 'firmware' name for sysupgrade partitions
...
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
16ad91d69f
ramips: remove unused include from the common GPIO code
...
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
affb57ee27
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
3099ffe414
ramips: set cp0_perfcount_irq for RT305X
...
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
d5a7e2f5c1
ramips: initial board support for MOFI3500-3GN
...
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This
router is basically the NA version of the HW550-3G.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
1844ea6c7b
ramips: UPF_FIXED_TYPE must be set for the serial ports
...
SVN-Revision: 26327
2011-03-27 19:20:03 +00:00
9ef4785364
ramips: define GPIO chips separately for each SoCs
...
SVN-Revision: 26326
2011-03-27 19:19:59 +00:00
37d6d88869
ramips: move GPIO definitions into a separate header file
...
SVN-Revision: 26325
2011-03-27 19:19:57 +00:00
251a367fb4
ramips: setup GPIO chip functions on the fly
...
SVN-Revision: 26324
2011-03-27 19:19:51 +00:00
b03f2dfcee
ramips: use separate register base for GPIO chips
...
SVN-Revision: 26323
2011-03-27 19:19:48 +00:00
8770359f17
ramips: fix dir-300 mtd layout
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 26322
2011-03-27 19:19:45 +00:00
f599459abb
ramips: enable MDIO on the HW550-3G board
...
SVN-Revision: 26321
2011-03-27 19:19:41 +00:00
d701a72760
ramips: add sysupgrade and status LED support for HW550-3G
...
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26320
2011-03-27 19:19:40 +00:00
23518bb2e4
ramips: initial board support for Aztech HW550-3G
...
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
1c92e047c8
ramips: register watchdog device on the rt288x boards
...
SVN-Revision: 25130
2011-01-26 20:48:52 +00:00
2b50cecea6
ramips: add watchdog device for RT288x
...
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
764aa3fe9c
ramips: register watchdog device on the rt305x boards
...
SVN-Revision: 25128
2011-01-26 20:48:47 +00:00
42e36cf732
ramips: add watchdog device for RT305x
...
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
f38367fcb4
ramips: implement clock API for RT288x
...
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
b0ffa70248
ramips: implement clock API for RT305X
...
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
f9e74383a9
ramips: remove extern and __init from function prototypes
...
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
f9898e30fb
ramips: handle OTG interrupt on the RT305x SoC
...
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
3b9a6adc7d
ramips: ramips_esw: convert it to be a platform driver
...
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
47dd3b9fea
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
21c8d63505
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
e5b081335e
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
462dabc7f5
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
2e45ce264d
ramips: register ethernet device on the RT-N15
...
SVN-Revision: 22213
2010-07-15 19:45:46 +00:00
c2ebadc504
ramips: add generic ethernet device for the RT288x
...
SVN-Revision: 22212
2010-07-15 19:45:43 +00:00
0d8c036e56
ramips: add mdio_cfg configuration for the ethernet driver
...
SVN-Revision: 22211
2010-07-15 19:45:40 +00:00
27375c5139
ramips: protect GPIO register access with a spinlock
...
SVN-Revision: 22171
2010-07-13 16:52:04 +00:00
971b7ff50e
Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
...
Signed-off-by: Helmut Schaa
SVN-Revision: 21643
2010-05-31 11:57:32 +00:00
c24397b385
ramips: merge slab patch
...
SVN-Revision: 21607
2010-05-28 19:45:28 +00:00
7ac21ada55
ramips: use COMMAND_LINE_SIZE directly
...
SVN-Revision: 21606
2010-05-28 19:45:24 +00:00
60cbdbb686
ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
...
SVN-Revision: 21083
2010-04-22 09:25:37 +00:00
a423c3abee
ramips: annotate device register function prototypes with __init
...
SVN-Revision: 20627
2010-03-31 08:40:28 +00:00
a9f313edea
ramips: register wifi device for the RT2880 based boards
...
SVN-Revision: 20625
2010-03-31 08:40:23 +00:00
9f3d673dbc
ramips: add wifi device for the RT2880 as well
...
SVN-Revision: 20624
2010-03-31 08:40:20 +00:00
1c25cfcde0
ramips: register wifi device on the rt305x based boards
...
SVN-Revision: 20616
2010-03-30 21:24:10 +00:00
6f4052abe0
The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
SVN-Revision: 20599
2010-03-30 12:04:05 +00:00
3ad14f304e
Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
SVN-Revision: 20596
2010-03-30 10:06:05 +00:00
72b08b729a
ramips_eth: pass sys_clk via platform_data
...
SVN-Revision: 19462
2010-01-31 17:56:30 +00:00
a4e85bbceb
ramips: register gpio buttons on the Fonera 2.0N board
...
SVN-Revision: 19413
2010-01-30 15:25:52 +00:00
8823482a02
ramips: register gpio buttons on the WHR-G300N board
...
SVN-Revision: 19412
2010-01-30 15:25:49 +00:00
35f47a3654
ramips: register gpio buttons on the V22RW-2x2 board
...
SVN-Revision: 19411
2010-01-30 15:25:47 +00:00
30a397fd5e
ramips: register gpio buttons on the DIR-300 revB board
...
SVN-Revision: 19410
2010-01-30 15:25:44 +00:00
f9b053e87f
ramips: fix wrong base addresses for the RT288x
...
SVN-Revision: 19409
2010-01-30 15:25:41 +00:00
8448caa6ad
ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
...
SVN-Revision: 19408
2010-01-30 15:25:36 +00:00
94c9590e91
ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
...
SVN-Revision: 19407
2010-01-30 15:25:33 +00:00
55185915de
ramips: cleanup WZR-AGL300NH board support file
...
SVN-Revision: 19406
2010-01-30 15:25:29 +00:00
0530dd9849
ramips: register gpio-buttons on the RT-N15 board
...
SVN-Revision: 19405
2010-01-30 15:25:25 +00:00
9327f02b7b
ramips: add common gpio-buttons device
...
SVN-Revision: 19404
2010-01-30 15:25:20 +00:00
4af1f533bb
ramips: register rtl8366s device on the RT-N15 board
...
SVN-Revision: 19403
2010-01-30 15:25:16 +00:00
e2dde81ead
ramips: sanitize return value of ramips_gpio_get
...
SVN-Revision: 19401
2010-01-30 15:25:08 +00:00
af9f40e60d
ramips: update mips multi-machine stuff
...
SVN-Revision: 19400
2010-01-30 15:25:03 +00:00
6351d88e29
add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com>
...
SVN-Revision: 19321
2010-01-24 23:31:49 +00:00
b624dec41b
ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards
...
SVN-Revision: 18229
2009-10-30 15:15:41 +00:00
bc59e3da51
ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h'
...
SVN-Revision: 18176
2009-10-26 17:17:51 +00:00
5dd653a6bd
ramips: use definitions from rt305x_regs, and nuke the duplicated ones
...
SVN-Revision: 18175
2009-10-26 17:17:48 +00:00
c170980c4f
ramips: move ramips_eth_platform_data into a separate file
...
SVN-Revision: 18174
2009-10-26 17:17:45 +00:00
Gabor Juhos
Felix Fietkau
John Crispin
Jo-Philipp Wich