Commit Graph

894 Commits (7fad1dae857560b400794ff2727a527ae3cfa750)

Author SHA1 Message Date
Alexandros C. Couloumbis 0c66bb9c55 linux/ar71xx: add preliminary 2.6.37 kernel support
SVN-Revision: 23944
2010-11-10 16:23:42 +00:00
Claudio Mignanti 20b2a4417a Add support for Ubiquiti UniFi AP
SVN-Revision: 23904
2010-11-06 21:08:48 +00:00
Felix Fietkau 5f3f1b8cd8 ar71xx: Configure WNDR3700 switch LED colors properly (#8103)
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23879
2010-11-04 18:55:16 +00:00
Felix Fietkau b3b2227869 Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request
SVN-Revision: 23878
2010-11-04 18:53:18 +00:00
Felix Fietkau 77eee74d56 ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23877
2010-11-04 18:48:22 +00:00
Felix Fietkau 91b6c63adc ar71xx: Set eth1 MAC address from EEPROM for WNDR3700
The WNDR3700's art/caldata partition contains three MAC addresses at
offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1,
respectively. The existing code configures eth1's MAC address by adding
1 to eth0's instead of using the value stored in the EEPROM. This patch
causes the stored value to be used directly. (On my WNDR3700s, the three
stored addresses are all sequential anyway.)

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23876
2010-11-04 18:46:07 +00:00
Felix Fietkau fc28e1cd7d ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai)
SVN-Revision: 23875
2010-11-04 18:39:49 +00:00
Imre Kaloz 0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8
SVN-Revision: 23851
2010-11-04 09:01:08 +00:00
Felix Fietkau b4e2c09b46 ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues
SVN-Revision: 23822
2010-11-03 14:55:53 +00:00
Felix Fietkau b3e708acd7 ar71xx: remove some unnecessary patches
SVN-Revision: 23581
2010-10-22 01:31:47 +00:00
Felix Fietkau 0468a284dd move a few more 2.6.36 config options from ar71xx to generic
SVN-Revision: 23580
2010-10-21 18:42:52 +00:00
Felix Fietkau f056c054b9 ar71xx: the ar7240 dsa driver is no longer used, remove it.
SVN-Revision: 23577
2010-10-21 18:42:28 +00:00
Felix Fietkau 9e2d1a194d ar71xx: use the new ar7240 switch driver for tl-wa901nd as well
SVN-Revision: 23576
2010-10-21 18:42:22 +00:00
Felix Fietkau 6656450c6d ar71xx: fix more section mismatches
SVN-Revision: 23575
2010-10-21 18:42:16 +00:00
Felix Fietkau 8858d90afe ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port patch to the 2.6.36 patches, add a backport patch to 2.6.32
SVN-Revision: 23574
2010-10-21 18:42:11 +00:00
Felix Fietkau 0ccae6ec9e ar71xx: refresh kernel config for 2.6.36
SVN-Revision: 23572
2010-10-21 18:41:57 +00:00
Felix Fietkau d40b0f3529 ar71xx: remove unused kernel versions, 2.6.36 should be the next target
SVN-Revision: 23571
2010-10-21 18:41:52 +00:00
Jo-Philipp Wich a680385396 remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel
SVN-Revision: 23451
2010-10-14 23:08:10 +00:00
Felix Fietkau fc035b3cb6 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
SVN-Revision: 23439
2010-10-14 13:41:42 +00:00
Felix Fietkau 3941621dbc ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)
SVN-Revision: 23432
2010-10-14 00:14:59 +00:00
Alexandros C. Couloumbis 5717ca5ea9 linux/ar71xx: workaround an rb4xx hard-lock until we get a proper fix.
SVN-Revision: 23327
2010-10-08 16:52:35 +00:00
Alexandros C. Couloumbis dc0e630123 linux/ar71xx: (2.6.36) add a missed patch
SVN-Revision: 23319
2010-10-08 12:15:18 +00:00
Alexandros C. Couloumbis 458e8736fc linux/ar71xx: add preliminary 2.6.36 kernel support (refresh patches)
SVN-Revision: 23317
2010-10-08 12:10:18 +00:00
Felix Fietkau b61a804bf7 ar71xx: increase rb4xx nand kernel partition size (patch by danimo)
SVN-Revision: 23293
2010-10-07 14:27:34 +00:00
Imre Kaloz 5f9a6a5431 upgrade kernel versions to the latest stable ones
SVN-Revision: 23219
2010-10-04 10:40:41 +00:00
Gabor Juhos 697f5d0bdd ar71xx: initial support for jjPlus JWAP003
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
2010-10-01 07:09:29 +00:00
Felix Fietkau 8511c6b16c AP96: Fix LAN/WAN setup
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23147
2010-09-28 22:55:14 +00:00
Gabor Juhos 2fdc8aea04 ar71xx: build firmware image for the TL-MR3420 v1 board
SVN-Revision: 23138
2010-09-27 14:54:04 +00:00
Gabor Juhos 32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
Gabor Juhos b831ebdde9 ar71xx: AR724[12] requires different USB setup
SVN-Revision: 23135
2010-09-27 14:53:57 +00:00
Gabor Juhos ef54e93712 ar71xx: build firmware image for the TL-WR841N v7
SVN-Revision: 23134
2010-09-27 14:53:54 +00:00
Gabor Juhos cda8655910 ar71xx: use the MDIO interface of the 2nd MAC on the ar7241
SVN-Revision: 23132
2010-09-27 14:53:49 +00:00
Gabor Juhos b445943cdf ar71xx: move ath9k specific PCI fixup into a separate file
SVN-Revision: 23131
2010-09-27 14:53:46 +00:00
Gabor Juhos 4ae167959b ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

SVN-Revision: 23130
2010-09-27 14:53:43 +00:00
Felix Fietkau a7bb7dd99e Add support for Atheros AP96 reference board
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
Felix Fietkau 0c6653c6e2 ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND
SVN-Revision: 22935
2010-09-05 16:17:06 +00:00
Gabor Juhos fcfe56924b ar71xx: build firmware images for the Zcomax boards
SVN-Revision: 22884
2010-09-03 18:14:43 +00:00
Gabor Juhos b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
Gabor Juhos ece9b523e4 ar71xx: refresh patches
SVN-Revision: 22864
2010-08-31 20:13:50 +00:00
Gabor Juhos 47f8fd1dde ar71xx: rewrite SPI drivers for the RB4xx boards
* add a new SPI controller driver
  * add SPI driver for the CPLD chip
  * convert the NAND driver
  * enable the mikroSD slot
  * enable more LEDs

SVN-Revision: 22863
2010-08-31 20:13:47 +00:00
Gabor Juhos a80b9af0cd ar71xx: refresh patches
SVN-Revision: 22803
2010-08-25 19:57:11 +00:00
Florian Fainelli b1becffa5b update to 2.6.32.20
SVN-Revision: 22766
2010-08-22 17:07:37 +00:00
Gabor Juhos 6855ac2393 ar71xx: don't override CONFIG_SWAP
SVN-Revision: 22701
2010-08-18 16:00:31 +00:00
Gabor Juhos 7bc5a672c1 ar71xx: change mac address initialization
SVN-Revision: 22700
2010-08-18 16:00:28 +00:00
Felix Fietkau 523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
SVN-Revision: 22675
2010-08-16 19:21:57 +00:00
Gabor Juhos e35f7ef51d ar71xx: add eap7660d board to diag.sh and sysupgrade
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22644
2010-08-14 21:07:31 +00:00
Alexandros C. Couloumbis 9aef272f4a linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)
SVN-Revision: 22631
2010-08-14 07:48:05 +00:00
Jo-Philipp Wich 6616951c15 add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
SVN-Revision: 22625
2010-08-13 19:29:51 +00:00
Felix Fietkau 65899cfa49 ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do
SVN-Revision: 22401
2010-07-27 21:04:43 +00:00
Felix Fietkau 4ee3ae96c2 ar71xx: fix sysupgrade on the ubnt nanostation m
SVN-Revision: 22370
2010-07-23 18:16:47 +00:00